• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.105-111
• /
• 2004

The changes of microflora and chemical characteristics during fermentation process of cotton waste for oyster mushroom cultivation were investigated with 5 l bench-scale reactors placed in an incubator at different temperatures ($40,\;50\;and\;60^{\circ}C$). Cotton waste was wetted to 70% moisture, and air flow rates to the substrate were 50, 100 and 300 cc/min. In processing of composting, the mesophilic bacterial population decreased sharply but thermophilic bacterial population increased. In case of fungi, both mesophilic and thermophilic population decreased. The daily $CO_2$ evolution showed little difference in all treatments, while $NH_3$ dropped sharply after 3 days. The desirable composting temperature and air flow based on the mycelial growth of oyster mushroom were $50^{\circ}C$ and 100 cc/min, respectively.

• The Korean Journal of Petroleum Geology
• /
• v.2 no.2 s.3
• /
• pp.83-90
• /
• 1994

Thermal maturation and diagenesis of the Gyeongsang Supergroup in the Euiseong area are studied by means of organic geochemical techniques and illite crystallinity. Black mudrocks of the Singdong Group contain organic matter of $0.5{\~}2{\%}$ derived from higher plants, being compared to type Ⅲ. Thermal maturity of organic matter reached dry gas generation phase. Tmax by Rock Eval pyrolysis varies between $578^{\circ}C$ and $593^{\circ}C$ regardless of stratigraphic position and localities, and vitrinite reflectance is about 2.9 and $3{\~}4{\%}Ro$ in the Jinju and the Nagdong Formations, respectively. Vitrinite reflectance measurements indicate that the maturation is mainly due to burial and partly to be affected by post-depositional intrusions. Illite crystallinity values from the Nagdong, Hasandong, Jiniu Formations and part of the Iljig Formation are plotted around the boundary between diagenesis and anchizone, indicating dry gas generation stage. However, the values are not dependent on stratigraphic position. The values from the Iljig, Hupyeongdong, Geomgog, and Sagog Formations fall into the range of anchizone, probably resulted from the post-depositional intrusions which occur locally. Both organic geochemical and illite crystallinity data indicate thermal maturation stage of dry gas generation. Diagenesis of the Gyeongsang strata is mostly controlled by burial, and partly affected by post-depositional intrusions. Paleotemperature of the Sindong Group is estimated at around $200^{\circ}C$ on the basis of illite crystallinity.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.213-218
• /
• 2020

This study was conducted to develop a method of analysis for 4-hydroxy-L-isoleucine in the seed extract of fenugreek (Trigonella foenum graecum), a health functional food that contains dietary fiber. The analytical method for 4-hydroxy-L-isoleucine was derived with O-phthaldialdehyde reagent (OPA) and determined by HPLC-PDA. The method was performed on a Capcell Pak C₁₈ UG 120 column (4.6×250 mm, 5 ㎛) in isocratic elution mode using disodium phosphate and acetonitrile. The validation of the developed analytical method was conducted by evaluating several parameters; selectivity, linearity, limit of detection (LOD), limit of quantification (LOQ), accuracy and repeatability. Excellent linearity (R²=0.999) was observed for 4-hydroxy-L-isoleucine in the concentration range (5-100 ㎍/mL). Observed recoveries of these compounds were found to be between 91.7 and 96.4%. Precision was between 0.2 and 2.4% relative standard deviation (%RSD).

• Journal of radiological science and technology
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2006

The rules and terms are described different meaning, in this results the research is accomplished for preventing practical workers from confusion. Atomic law are kept up modification and development in our situation by the ICRP's recommendation, on the other hand, the rules of diagnosis radiation equipment safety managements are modified partial, then resulted in confusion. The study was comparison between the rules of diagnosis radiation equipment safety management and atomic energy law, and the modification items obtained were as follows. 1. With each other different the terms and units are used. With the exception of special terms for affairs usage, it is needless to say that common term uniformity is standardized. The standardization of rules and guidance have not need to confusion radiological practical workers. 2. The following is omitted. 1) The radiation protection against tile patient and the hospital visitor. 2) Radiation dose limit of the woman patient who is in the process of becoming pregnant. 3) Radiation dose limit of the person who is not regarded as madical madical exposure. 4) The control of the exposure of pregnant of women at work.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.657-662
• /
• 2005

Iron sulfide(FeS) is significantly produced through both abiotic and biotic processes in natural sediments and pore waters. In this study, chromium(VI) reaction with iron sulfide at various initial concentrations and at pH values of 4 and 8 was conducted to better understand the interactions between Cr(VI) and Fe(II) species dissolved from iron sulfide in both the aqueous and solid phases. Also, the removal efficiency of iron sulfide was compared with zero valent iron and other iron bearing oxides such as ${\alpha}-Fe_2O_3$, ${\alpha}-FeOOH$ and $Fe_3O_4$. The Cr(VI) removal rate by iron sulfide was higher at pH 4 than at pH 8 because more dissolved Fe(II) existed at pH 4 than at pH 8. Chromium and iron(oxyhydroxide) could be identified on the iron sulfide surface with transmission microscopy imaging and energy dispersive spectroscopy. The removal capacity of iron sulfide was much higher than zero valent iron and other iron oxide minerals due to the synergic effect of hydrogen sulfide and ferrous iron.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.386-392
• /
• 1998

An objective index for quality estimation of anchovy sauce, our traditional seafood, has been required because inadequate standard causes dispute about quality estimation. Qualities of anchovy sauce made by traditional method and commercial anchor sauce products were compared by investigating their proximate compositions, total nitrogen contents, amino acid contents, development and level of a specific peptide on SDS-polyacrylamde gel electrophoresis (SDS-PAGE) and isoelectric point (pI) of the specific peptide. Also, pIs of IEF were attemped to identify fish species of salt-fermented sauces. The 55,600 and 46,900 dalton of peptide band were identified in all experimental samples. Especially, the area of 55,600 dalton was closely correlated with total nitrogen contents. Also, specific pIs in accordance with fish species were identified. The results suggest that correlation between area of 55,600 dalton and total nitrogen contents are used of index for quality estimation, and specific pIs are used of fish species identification.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.645-660
• /
• 2018

In the southeastern part of the Korean Peninsula, huge fault valleys, including the Yangsan and Ulsan faults, are recognized. These NNE-SSW trending lineaments are called as a whole Yangsan Fault System. However, this fault system is relatively poorly studied except the Yangsan and Ulsan faults. This study deduced the paleostress history based on the mutual cross-cutting relationships between geologic structures developed in the granite body near the Ilgwang fault, which is compared with previous studies. In the study area, four lineaments parallel to the Ilgwang fault are recognized, and three of them show evidences of faulting. In each lineament, both slip-senses of left-lateral and right-lateral are recognized. It indicates that these faults consistently underwent multiple deformations of inversion along the faults. The inferred paleostress directions based on the mutual cross-cutting relationships of the geological structures are as follows: 1) Tensile fractures developed in the late Cretaceous under the ENE-WSW direction of compressive stress, 2) NW-SE trending maximum horizontal principal stress generated conjugate strike-slip faults, and 3) selective reactivations of some structures were derived under the compression by the NE-SW trending principal stress.

• Journal of Yeungnam Medical Science
• /
• v.14 no.1
• /
• pp.245-261
• /
• 1997

Slipped capital femoral epiphysis(SCFE) is a disorder in which there is a gradual or acute disruption through the capital physeal plate. The physiolysis is through a widened zone of hypertrophy, which is weakened due to altered chondrocytic maturation and endochondral ossification. The cause or causes of SCFE remain uncertain. The association of obesity and adolescent age with growth rate are predisposing factors. The possibility that most patients with subclinical hormonal abnormality were proved. The goal of treatment of slipped capital femoral epiphysis is to restore the function of the hip and delay the development of degenerative osteoarthrosis by prevention of additional displacement of the epiphysis. We report 10 patients(12hips) with SCFE who were treated by surgical means and followed along for more than one year, at Yeungnam University Hospital, from 1989 to 1996. There were six boys and four girls. The average age at operation was 11.8 years. Seven cases occurred in the left hip, one case in the right and 2 cases had bilateral involvement, five cases had a history of minor trauma on affected hip. Among hormonally studied six patients, panhypopituitarism patient was one case; decreased testosterone, two; decreased growth hormone, two; and decreased thyroid hormone, one. According to clinical stage, two cases were the acute type; five cases, acute on chronic type; and three cases, chronic type. On the radiological grades of slipping, mild slippage were nine hips; moderate, one; and severe, two. The eleven hips were treated by pin fixation in situ, and one, by cuneiform osteotomy. On the average follow-up of 2.6 years, ten hips were excellent or good functional results, two hips were failure.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.248-261
• /
• 1999

In order to define a current set of Korean children norm with mixed dentition, following study was done. The subjects were 102 healthy dentition contestants(48boys, 54girls). Standardized lateral head roentgenograms were taken, and Ricketts analysis was done. Results were as follows: 1. Length of anterior cranial base, posterior facial height, corpus length were longer in male than in female(p<0.05), and Porion was located posteriorly in male than in female(p<0.01). 2. Through facial depth, Pogonion of male was more forwardly positioned(p<0.05), mandible was significantly steeper in female, and maxillary anterior teeth were significantly tipped forward in male(p<0.05). 3. Variables such as length of anterior cranial base, upper molar position(p<0.01) and corpus length(p<0.05) were significantly changed by age. 4. Maxillary height, facial depth, mandibular plane angle, convexity were changed by age, but not significantly(p>0.05).

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.40-51
• /
• 2021

MLS (Mobile Laser Scanning) which is a scanning method done by moving the LiDAR (Light Detection and Ranging) is widely employed to capture indoor PCD (Point Cloud Data) for floor plan generation in the AEC (Architecture, Engineering, and Construction) industry. The movement and rotation of LiDAR in the scanning phase cause deformation (i.e. skew) of PCD and impose a significant impact on quality of output. Thus, a de-skewing method is required to increase the accuracy of geometric representation. De-skewing methods which use position and pose information of LiDAR collected by IMU (Inertial Measurement Unit) have been mainly developed to refine the PCD. However, the existing methods have limitations on de-skewing PCD without IMU. In this study, a novel algorithm for de-skewing 2D PCD captured from MLS without IMU is presented. The algorithm de-skews PCD using scan matching between points captured from adjacent scan positions. Based on the comparison of the deskewed floor plan with the benchmark derived from TLS (Terrestrial Laser Scanning), the performance of proposed algorithm is verified by reducing the average mismatched area 49.82%. The result of this study shows that the accurate floor plan is generated by the de-skewing algorithm without IMU.