• 제목/요약/키워드: $In_2S_3$ thin film

검색결과 838건 처리시간 0.038초

X-ray 마스크용 $WN_x$ 박막 증착에 관한 연구(l) (A Study on Deposition of Tungsten Nitride Thin Film for X-ray mask(l))

  • 장철민;최병호
    • 한국재료학회지
    • /
    • 제8권2호
    • /
    • pp.147-153
    • /
    • 1998
  • $WN_x$ 는 리소그라피 마스크의 흡수체나 VLSI 기술에서 금속연결의 확산방지재로써 주목을 받고 있다. RF마르네트론 스퍼터링법으로 여러 증착변수에서 제조한 $WN_x$ 막을 고찰하였다. $SiN_x$ 멤브레인 위에 증착된 박막의 결정구조는 질소아르곤 가스유량비(0-30%), 가스압력(10-43mTorr), RF출력(0150W)및 기판과 타겟사이의 거리 6cm에서 증착한 $WN_x$ 박막은 비정질이였으며 다른 조건에서는 표면이 거친 다결정질이었다. 비정질 박막은 rms가 $3.1\AA$으로 아주 매끈하여 X-선 마스크용 흡착제로써 적합할 것으로 기대된다.

  • PDF

Poly(p-phenylenevinylene)s Derivatives Containing a New Electron-Withdrawing CF3F4Phenyl Group for LEDs

  • Jin, Young-Eup;Kang, Jeung-Hee;Song, Su-Hee;Park, Sung-Heum;Moon, Ji-Hyun;Woo, Han-Young;Lee, Kwang-Hee;Suh, Hong-Suk
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권1호
    • /
    • pp.139-147
    • /
    • 2008
  • New PPV derivatives which contain electron-withdrawing CF3F4phenyl group, poly[2-(2-ethylhexyloxy)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (CF3F4P-PPV), and poly[2-(4-(2-etylhexyloxy)-phenyl)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (P-CF3F4P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing CF3F4phenyl group to the phenyl backbone, the LUMO and HOMO energy levels of CF3F4P-PPV (3.14, 5.50 eV) and P-CF3F4P-PPV (3.07, 5.60 eV) were reduced. The PL emission spectra in solid thin film are more red-shifted over 50 nm and increased fwhm (full width at half maximum) than solution conditions by raising aggregation among polymer backbone due to electron withdrawing effect of 2,3,5,6-tetrafluoro-4-trifluoromethylphenyl group. The EL emission maxima of CF3F4P-PPV and P-CF3F4P-PPV appear at around 530-543 nm. The current density-voltage-luminescence (J-V-L) characteristics of ITO/PEDOT/polymer/Al devices of CF3F4P-PPV and P-CF3F4P-PPV show that turn-on voltages are around 12.5 and 7.0 V, and the maximum brightness are about 82 and 598 cd/m2, respectively. The maximum EL efficiency of P-CF3F4P-PPV (0.51 cd/A) was higher than that of CF3F4P-PPV (0.025 cd/A).

A-Se 기반 디지털 X-선 영상장치의 Contrast-detail 특성 평가 (Evaluation of Contrast-detail Characteristics of an A-Se Based Digital X-ray Imaging System)

  • 현혜경;박소현;김근영;조희문;조효성
    • 한국방사선학회논문지
    • /
    • 제1권1호
    • /
    • pp.11-16
    • /
    • 2007
  • 본 연구에서는 a-Se 기반 디지털 X-선 영상장치의 저대조도 특성을 평가하기 위하여 contrast-detail 곡선 해석을 수행하였다. 본 실험에 사용된 X-선 영상장치는 픽셀크기가 $139mm{\times}139mm$이고 유효면적이 $46.7cm{\times}46.7cm$인 a-Si TFT 기판 위에 500mm 두께의 광전도체가 코팅된 구조를 갖고 있다. Contrast-detail 곡선을 측정하기 위하여 우선 주어진 촬영조건(즉, 40, 50, 60, 70, 80 kVp, and 16 mA.s)에서 상용 팬톰인 CDRAD 2.0을 사용하여 X-선 영상을 획득한 후, 그 영상으로부터 IQFinv 인자를 사용하여 그 특성을 최종 평가하였다. 평가된 IQFinv 값은 주어진 광 플루언스(즉, $1.8{\times}105$, $5.9{\times}105$, $11.3{\times}105$, $19.4{\times}105$, and $29.4{\times}105$ photons/$mm^2$)에서 각각 24.4, 35.3, 39.2, 41.5, 43.4으로 광 플루언스가 증가할수록 점진적으로 증가하였으며 이는 광 플루언스가 증가할수록 영상의 가독성이 향상됨을 나타낸다.

  • PDF

Electrical and Chemical Properties of ultra thin RT-MOCVD Deposited Ti-doped $Ta_2O_5$

  • Lee, S. J.;H. F. Luan;A. Mao;T. S. Jeon;Lee, C. h.;Y. Senzaki;D. Roberts;D. L. Kwong
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제1권4호
    • /
    • pp.202-208
    • /
    • 2001
  • In Recent results suggested that doping $Ta_2O_5$ with a small amount of $TiO_2$ using standard ceramic processing techniques can increase the dielectric constant of $Ta_2O_5$ significantly. In this paper, this concept is studied using RTCVD (Rapid Thermal Chemical Vapor Deposition). Ti-doped $Ta_2O_5$ films are deposited using $TaC_{12}H_{30}O_5N$, $C_8H_{24}N_4Ti$, and $O_2$ on both Si and $NH_3$-nitrided Si substrates. An $NH_3$-based interface layer at the Si surface is used to prevent interfacial oxidation during the CVD process and post deposition annealing is performed in $H_2/O_2$ ambient to improve film quality and reduce leakage current. A sputtered TiN layer is used as a diffusion barrier between the Al gate electrode and the $TaTi_xO_y$ dielectric. XPS analyses confirm the formation of a ($Ta_2O_5)_{1-x}(TiO_2)_x$ composite oxide. A high quality $TaTi_xO_y$ gate stack with EOT (Equivalent Oxide Thickness) of $7{\AA}$ and leakage current $Jg=O.5A/textrm{cm}^2$ @ Vg=-1.0V has been achieved. We have also succeeded in forming a $TaTi_x/O_y$ composite oxide by rapid thermal oxidation of the as-deposited CVD TaTi films. The electrical properties and Jg-EOT characteristics of these composite oxides are remarkably similar to that of RTCVD $Ta_2O_5, suggesting that the dielectric constant of $Ta_2O_5$ is not affected by the addition of $TiO_2$.

  • PDF

CBD(Chemical Bath Deposition)방법에 의한 ZnSe 박막성장과 광전기적 특성 (Growth and Opto-electric Characterization of ZnSe Thin Film by Chemical Bath Deposition)

  • 홍광준;유상하
    • 센서학회지
    • /
    • 제10권1호
    • /
    • pp.62-70
    • /
    • 2001
  • CBD방법으로 성장하여 $450^{\circ}C$로 열처리한 ZnSe 박막은 회전 무늬로부터 외삽법으로 구한 격자상수 $a_0$$5.6678\;{\AA}$인 zinc blend임을 알았다. Van der Pauw 방법으로 측정한 Hall 데이터에 의한 이동도는 10 K에서 150 K 까지는 불순물 산란 (impurity scatterimg)에 의하여, 150 K에서 293 K까지는 격자산란 (lattice scattering)에 의하여 감소하는 경향을 나타냈다. 또한 운반자 농도의 ln n대 1/T에서 구한 활성화 에너지($E_a$)는 0.27 eV였다. 투과 곡선의 투과단으로 본 띠 간격은 293 k에서 $2,700{\underline{5}}\;eV$이었던 것이 10K에서는 $2.873{\underline{9}}\;eV$로 변하였다. 광전류 봉우리 위치를 투과단과 비교할 때 293 K에서 30 K까지 관측된 한 개의 봉우리는 가전자대 ${\Gamma}_8$에서 전도대 ${\Gamma}_6$로 전이에 의한 광전류 봉우리이고, 10K에서 관측된 단파장대 417.3 nm($2.971{\underline{4}}\;eV$)의 봉우리는 가전자대 ${\Gamma}_7$에서 전도대 ${\Gamma}_6$로, 431.5 nm($2.873{\underline{3}}\;eV$)의 봉우리는 가전자대 ${\Gamma}_8$에서 전도대 ${\Gamma}_6$로 전이에 의한 광전류 봉우리가 관측된 것으로 판단된다. 광전류 봉우리의 10K에서 단파장대의 가전자대 갈라짐(splitting)에 의해서 측정된 ${\Delta}so$(spin orbit coupling)는 $0.098{\underline{1}}\;eV$ 였다. 10 K에서 광발광 봉우리의 440.7 nm($2.812{\underline{7}}\;eV$)는 자유 엑시톤(free exciton : $E_x$), 443.5 nm ($2.795{\underline{5}}\;eV$)는 주개-얽매인 엑시톤(donor-bound exciton) 인 $I_2(D^0,\;X)$와 445.7 nm ($2.781{\underline{8}}\;eV$)는 반개-얽매인 엑시톤(acceptor-bound exciton) 인 $I_1(A^0,X)$이고, 460.5 nm ($2.692{\underline{3}}\;eV$)는 주개-받개쌍(donor-acceptor pair:DAP) 발광, 580 nm ($2.137{\underline{6}}\;eV$)는 self activated(A)에 기인하는 광발광 봉우리로 분석된다.

  • PDF

리간드 종류와 후처리 공정에 따른 황화납 콜로이드 양자점 박막의 전자 구조 및 원소 조성 분석 (Electronic Structure and Elemental Composition of the Lead Sulfide Colloidal Quantum Dots Depending on the Types of Ligand and Post-Treatment)

  • 김태건;최혜경;정소희;김정원
    • 대한화학회지
    • /
    • 제60권6호
    • /
    • pp.402-409
    • /
    • 2016
  • 3-Mecaptopropionic acid (MPA) 리간드와 하이브리드 타입 리간드($MPA+CdCl_2$)로 각각 부동화(passivation) 된 2.8 nm 크기의 황화납 콜로이드 양자점 박막을 제작하고, 각각을 대기 중, 질소 분위기에서 열처리, 오존 처리 하였을 때 나타나는 두 양자점 박막의 전자 구조와 조성 원소의 변화를 광전자 분광법을 이용하여 연구하였다. 대기에서 열처리는 리간드 종류와 관계없이 황화납 양자점의 가전자대 시작점이 공통적으로 약한 p-도핑 효과가 있음을 직접적으로 확인할 수 있었다. 또한, 오존처리 후 두 황화납 양자점 표면에 공통적으로 $Pb(OH)_2$, $PbSO_x$, PbO를 형성하는 것을 확인하였다. 하지만, 오존에 의해 형성된 산화물 중 PbO 성분은 특별히 하이브리드 타입 리간드로 부동화 된 양자점에서 형성된 양이 MPA 리간드만으로 부동화 된 양자점과 비교했을 때 감소한 것을 확인할 수 있었다. 이것은 PbS(111) 격자면에 있는 과량의 Pb 표면이 $Cl_2$으로 부동화되면서, Pb 양이온과 오존의 반응을 차단함으로써 PbO의 형성을 어렵게 했기 때문으로 추정된다.

$UV-TiO_2$ 광촉매 반응기에 의한 미생물의 살균효과 (Killing Effects of $UV-TiO_2$ Photocatalytic System on Microorganisms)

  • 김중곤;신용국;이영상;김용호;김시욱
    • 미생물학회지
    • /
    • 제37권2호
    • /
    • pp.130-136
    • /
    • 2001
  • 두가지 형태(1단 반응기와 2단 반응기)의 UV-$TiO_2$광촉매 시스템과 3가지 형태의 $TiO_2$가 코팅된 촉매를 이용하여 미생물에 대한 살균효과를 살펴보았다. 첫번째 형태는 석영관에 $TiO_2$가 박막증착된 것이고 두번째 형태는 glass bead 표면에 $TiO_2$가 코팅된 형태이며 세번째는 alginate bead에 $TiO_2$가 혼합된 형태이다. 1분동안 UV를 조사하였을때 1단 반응기에서 $TiO_2$가 박막증착된 석영관과 $TiO_2$가 코팅된 glass bead의 살균효율은 각각 63.2%와 89.9%이었다. 반응기에 기포를 주입했을 때의 살균효율은 glass bead의 경우 95%로 기포를 주입하지 않았을 때의 90.6%보다 휠씬 효과적이었다. 기포를 주입하면서 광촉매로 alginate bead에 $TiO_2$가 혼합된 것을 이용하였을 경우의 살균효율은 86%이었다. $TiO_2$가 코팅된 glass bead를 이용한 반응기에 기포를 주입하면서 $H_2$$O_2$를 처리하였을 때의 살균정도는 미량농도에서도 매우 효과적이었다. 1단 반응기보다 2단 반응기에서의 살균효율이 더욱 증가하였으며 E. coli에 대한 살균효과가 S. cerevisiae보다 더 높게 나타났다.

  • PDF

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.

Image Transfer Using Cellular Phones and Wireless Internet Service

  • Shin, Dong-Ah;Doo, Tae-Hoon;Kim, Hyo-Jun;Kim, Hyoung-Ihl
    • Journal of Korean Neurosurgical Society
    • /
    • 제39권6호
    • /
    • pp.471-474
    • /
    • 2006
  • Objective : Neuroimaging data are of paramount importance in making correct diagnosis. We herein evaluate the clinical usefulness of image transfer using cellular phones to facilitate neurological diagnosis and decision-making. Methods : Selected images from CT, MRI scans, and plain films obtained from 50 neurosurgical patients were transferred by cellular phones. A cellular phone with a built-in 1,300,000-pixel digital camera was used to capture and send the images. A cellular phone with a 262,000 color thin-film transistor liquid crystal display was used to receive the images. Communication between both cellular phones was operated by the same wireless protocol and the same wireless internet service. We compared the concordance of diagnoses and treatment plans between a house staff who could review full-scale original films and a consultant who could only review transferred images. These finding were later analyzed by a third observer. Results : The mean time of complete transfer was $2{\sim}3\;minutes$. The quality of all images received was good enough to make precise diagnosis and to select treatment options. Transferred images were helpful in making correct diagnosis and decision making in 49/50 [98%] cases. Discordant result was caused in one patient by improper selection of images by the house staff. Conclusion : The cellular phone system was useful for image transfer and delivery patient's information, leading to earlier diagnosis and initiation of treatment. This usefulness was due to sufficient resolution of the built-in camera and the TFT-LCD, the user-friendly features of the devices, and their low cost.

이항대립(二項對立)으로부터의 탈주 -<오목어>에서의 매체 수행 방식 분석- (Escape from Binary Opposition -Analysis of Performative Method in -)

  • 서영주
    • 만화애니메이션 연구
    • /
    • 통권41호
    • /
    • pp.511-531
    • /
    • 2015
  • 애니메이션 영화를 탄생시킨 근원적 추동력은 움직이는 이미지에 대한 매혹이다. 그리고 애니메이션 이미지는 프레임과 프레임 사이에서 애니메이터와 장치들이 수행적 관계를 맺는 과정에서 발생한다. 때문에 이미지의 운동이 어떤 질료와 방식을 통해 구성되었는가를 살펴보는 것은 애니메이션 영화를 텍스트로 읽는 필수적 출발점이 될 것이다. 이러한 관점에서 본고는 서사의 전개와는 독립적인 차원에서 이미지 자체가 주제의식을 보다 감각적으로 전달하고 있는 한국 애니메이션 영화 <오목어>의 재료와 기법, 그리고 매체가 수행된 방식을 분석한다. <오목어>는 물 밖 세상에 대한 열망을 품은 물고기의 여정을 누들스크린으로 구현한 스톱모션 애니메이션 영화이다. 애니메이터 김진만은 한국에서 쉽게 접할 수 있는 식재료인 국수용 소면을 사용하여 누들스크린 애니메이션을 고안함으로써 <오목어>의 독창적이면서도 친근한 이미지를 만들어내었으며, 이를 통해 존재론적인 자아성찰과 세계에 대한 고찰을 불이사상(不二思想)에 기반하여 풀어내었다. 불이사상은 현상적으로 이분법적인 모습일지라도 우주의 진리는 분별이 없으며 본질적으로 하나의 괘로 작용한다는 이치로 서양의 이원론적 가치관과 달리 순환적이며 합일적인 동양철학에 기원하고 있다. 본 논문은 서양에서 유입된 애니메이션 매체를 한국 애니메이터가 어떻게 독자적으로 수용해내었고 이를 통해 구성된 이미지의 운동이 어떻게 불이사상이라는 주제의식을 효과적으로 전달하고 있는지를 밝힌다. 이를 위해 2장에서는 누들스크린의 형태와 구조를 살펴본다. 여기서는 애니메이션 매체의 초창기 시절 알렉세이프와 파커에 의해 고안된 핀스크린과의 유사성과 상이성이 분석될 것이며, 누들스크린과 핀스크린 두 기법의 미학적 가치와 특수성이 고찰될 것이다. 다음 3장에서는 이항대립적으로 제시되었던 이미지가 누들스크린의 속성을 활용하여 어떻게 초반의 대립 개념을 전복시키고 보다 풍성한 함의로 확장되는지를 살펴볼 것이다. 마지막 4장에서는 애니메이션 제작과정을 개방함으로써 애니메이션 매체의 허구적 환영성을 반영적으로 폭로하고 스크린 밖으로 펼쳐짐으로써 우리의 현상적 삶의 세계에 대해 질문하도록 하는 <오목어>의 열린 액자 형식에 대하여 알아볼 것이다. 그리고 이 모든 장에 걸쳐 화두로서의 불이사상이 어떻게 다루어지고 있는지를 살펴볼 것이다. 이를 통해 애니메이션 영화 이미지가 단순히 서사에 봉사함이 아니라 보다 독립적이고 확장적인 차원에서 개념을 전달하고 지각을 활성화시키며 통합적 감각 경험을 이끌어낼 수 있는지를 확인하고자 한다.