• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.144-149
• /
• 2001

Objective : Spinal nerve root compression occurs commonly in conditions, such as herniated nucleus pulposus, spinal stenosis, intervertebral foraminal stenosis, and trauma. However, the pathophysiolosy of the symptoms and signs related to spinal nerve root compression is poorly understood. The purpose of the present study was to assess and compare the changes of various pressures of intervertebral foraminal pressure before and after decompression. Method : After laminetomy without foraminotomy was performed, pressure sensor tip of Camino parenchymal type was located at the middle-central portion of the intervertebral foramen and anterior portion of nerve root for the foraminal pressure before decompression of the intervertebral foramen. After laminectomy with foraminotomy, the same method was used for the foraminal pressure after decompression. The authors studied 40 consecutive patients (57 disc spaces) with severe constant root pain to the lower leg, pain unrelived by bed rest, and minimal tension signs, diagnosed by MRI. Results : In patients with intervertebral foraminal stenosis, the intraforaminal pressure was decreased from $86{\pm}2.23mmHg$ to $17.1{\pm}1.51mmHg$ and in patients without stenosis, from $55.9{\pm}1.08mmHg$ to $11.9{\pm}1.25mmHg$. All patients below 20mmHg after decompression showed good outcome, but 4 cases who showed poor outcome had foraminal stenosis, posterolateral type of the herniated disc, and above 30mmHg of foraminal pressure after decompression. Conclusion : These findings suggest that if the foraminal pressure falls below 20mmHg after decompression, good outcome can be anticipated. Central type of the herniated disc shows better outcome compared to the posterolateral type.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1293-1296
• /
• 2005

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.260-260
• /
• 1999

We compared c-axis tunneling characteristics of small stacked intrinsic Josephson junctions prepared on the surface of pristine, I-, and HgI$_2$-intercalated Bi$_2Sr_2CaCu_2O_{8+x}$ (Bi2212) single crystals. The R(T) curves are almost metallic in I-Bi2212 specimens, but semiconducting in HgI$_2$-Bi2212 ones.· The transition temperatures were 82.0 K, 73.0 K, and 76.8 K for pristine Bi2212, I-Bi2212, and HgI2-Bi2212 specimens, respectively, consistent with p-T$_c$ phase diagram. Current-voltage (IV) characteristics of both kinds of specimens show multiple quasiparticle branches with well developed gap features, indicating Josephson coupling is established between neighboring CuO$_2$ planes. The critical current I$_c$ of I-Bi2212 is almost the same as of that of pristine crystals, but I$_c$ is much reduced in Hgl$_2$-Bi2212. In spite of expanded interlayer distances, the interlayer coupling is not significantly affected in I-Bi2212due to holes generated by iodine atoms. The coupling in HgI$_2$-Bi2212 is, however, weakened due to inertness of HgI$_2$ molecules and the expansion of interlayer distance. Relation between the superconducting transition temperature T$_c$ and the critical current I$_c$ seems to contradict Anderson's interlayer-pair-tunneling theory but agree with a modified version of it.

• Korean Journal of Adult Nursing
• /
• v.12 no.2
• /
• pp.234-244
• /
• 2000

It is widely recognized that manipulation of body position takes advantage of the influences of gravity for improving oxygenation. The study aims to determine the effects of positioning(supine, prone, right lateral decubitus and left lateral decubitus positions) applied to the mechanically ventilatory acute respiratory failure patients on arterial oxygen partial pressure($PaO_2$), alveolar arterial oxygen tension difference($AaDO_2$), mean aterial pressure, peak inspiratory pressure and plateau pressure. Thirty two acute respiratory failure patients admitted to the medical intensive care unit at Kangnam St. Mary's Hospital, The Catholic University of Korea from March 1997 to January 1998, were divided into three groups by radiographic evidence of unilateral or bilateral lung disease. In group 1 with dominant right lung disease were twelve subjects, group 2 with dominant left lung disease had eight subjects and group 3 had twelve subjects with bilateral lung disease. The variables were measured in 30 minutes after each position of supine, prone, good lung down lateral decubitus and sick lung down lateral decubitus position. The position order was done at random by Latin squre design. The results are as follows; 1) With group 1 patients, the $PaO_2$ in the left lateral decubitus and prone position were $126.8{\pm}30.8$ mmHg and $106.7{\pm}36.8$ mmHg, respectively(p=0.0001). 2) With group 2 patients, the $PaO_2$ in the prone and the right lateral decubitus position were $121.7{\pm}44.7$ mmHg and $118.5{\pm}31.7$ mmHg, respectively (p=0.0018). 3) With group 3 patients, the $PaO_2$ was $143.6{\pm}36.6$ mmHg in the prone position (p=0.0001). 4) With group 1 patients, the $AaDO_2$ in the left lateral decubitus and the right lateral decubitus position were $178.1{\pm}29.7$ mmHg and $233.1{\pm}24.4$ mmHg, respectively(p=0.0001). 5) With group 2 patients, the $AaDO_2$ in the prone and the left lateral decubitus postion were $184.0{\pm}39.5$ mmHg and $231.0{\pm}23.9$ mmHg, respectively(p=0.0019). 6) With group 3 patients, the $AaDO_2$ in the prone and the supine postion were $377.1{\pm}35.6$ mmHg and $435.7{\pm}13.1$ mmHg, respectively (p=0.0001). 7) There were no differences among the mean arterial pressure, peak inspiratory pressure and plateau pressure for each of the supine, prone, left lateral decubitus and right lateral decubitus position. The results suggest that oxygenation may improve in mechanically ventilatory patients with unilateral lung disease when the position is good lung dependent and prone, and patients with bilateral lung disease when the position is prone without any effects on the mean arterial pressure and airway pressure. It is suggested that body positions improve ventilation/perfusion matching and oxygenation need to be specified in patient care plans.

• Culinary science and hospitality research
• /
• v.17 no.4
• /
• pp.295-306
• /
• 2011

This study aims to increase the flavor of a lamb filet dish. The method used was as follows. Four kinds of crusts(mustard, herb & garlic, nuts, mushrooms) were made, and they were topped over lamb filet steaks. After cooking them, the good samples (mustard(MU3), herb & garlic(HG2), nuts(NC2), mushrooms(MC3)) by different materials through a sensory test were classified The selected samples were named as 1. Blank, 2. ECl(MU3), 3. EC2(HG2), 4. EC3(NC2), and 5. EC4(MC3). And then another sensory test was conducted targeting the samples to find out which crust had the best preference value. The results of the sensory test were statistically calculated Summarizing the results, all 4 kinds of samples topped with 4 different crusts showed much higher values than Blank, the control group. That indicates that the cooking method topping a crust on a lamb filet steak dish is very effective. Among them, the HG2 sample produced by mixing 70% of bread crumbs(115.5g) and 30% of garlic chop(49.5) with the base spice consisting of parsley 8g, rosemary 3g, basil 4g and olive oil 50g was evaluated as the best crust.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.27-30
• /
• 2010

A X-ray optical modulator measures x-ray dose using optical transmissivity ratio change of the liquid crystal cell. To apply in this optical modulator, we made photoconductor films and compared electrical properties of this films in this study. Photoconductors are deposited on ITO glass with $200{\mu}m$ using the percipitation method and print method. I-V test was conducted to alalyze electrical properties of this films and measured darkcurrent and SNR was acquired using the measured dark current and sensitivity. As a result of this measurements, $HgI_2$ film made by precipitation method is lower(about 40%) darkcurrent than $HgI_2$ films made by precipitation method and sensitivity is two times greater than print method. And we knew that $HgI_2$ films were also 10~25 times greater SNR at $1v/{\mu}m$ than $PbI_2$, PbO, CdTe film made by precipitation method. This results suggest that $HgI_2$ films made by precipitation method has improved characteristics of x-ray dose meter by applying in x-ray optical modulator.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.754-757
• /
• 2008

To maintain the indoor air quality, many ventilation systems and technologies have been developed in the highly insulated and air tight buildings. In this study, a porous construction material, which is applicable to passive ventilation system, is developed and measured the performances of the permeability and the resistance of water vapor, and the dust collection efficiency. The average coefficient of water vapor permeability shows $3.6\;g/m^2{\cdot}h{\cdot}mmHg$, which is slightly higher than Hanji ($2.4{\sim}3.2\;g/m^2{\cdot}h{\cdot}mmHg$) and the average water vapor resistance factor shows $0.303\;g/m^2{\cdot}h{\cdot}mmHg/g$, which is slightly smaller than Hanji($0.309{\sim}0.315\;g/m^2{\cdot}h{\cdot}mmHg/g$). The pressure drop of the porous construction material is smaller than the HEPA filter and the minimum dust collection efficiency shows 82.8% in the range of $2{\sim}9\;cm/s$.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.219-223
• /
• 2010

In this study, we fabricated the HgSe nanoparticle-based thin film transistors (TFTs) of back gate structure with PVA gate dielectric. The fabricated TFTs show the improved electrical characteristics in the mobility of $16\;cm^2$/Vs and the on/off ratio of $10^4$ after annealing process at $100^{\circ}C$ for 5 min. AFM images demonstrate that the decrease in surface roughness according to annealing process leads to the improvement of electrical characteristics. The change in drain current caused from the conditions of flexible substrate is investigated under 0.6% strain.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.27-31
• /
• 2003

A Polythiophene-quinoline/glassy carbon (PTQ/GC) modified electrode was developed for the determination of trace mercury in industrial waste water, natural water, soil, and other media. The electrode was prepared by the cyclic voltammetric polymerization of thiophene and quinoline on glassy carbon (GC) electrode by the potential application from -0.6 V to +2.0 V (50 mV/sec) in a solution of 0.1 M thiophene, quinoline and tetrabutyl ammonium perchlorate (TBAP) in acetonitrile. Optimum thickness of the polymer membrane on the GC electrode was obtained with 20 repeated potential cyclings. The redox behavior of Cu(Ⅱ) and Hg(Ⅱ) were almost identical on this electrode. The addition of 4-(2-pyridylazo)resorcinol (PAR) to the solution containing Cu(Ⅱ) and Hg(Ⅱ) allowed the separation of the components due to the formation of the Cu(Ⅱ)-PAR complex reduced at -0.8V, which was different from the Hg(Ⅱ) reduced at -0.5 V on a saturated calomel electrode (SCE). The calibration graph of Hg(Ⅱ) shows good linear relationship with the correlation factor of 0.9995 and the concentration gradient of 0.33 ㎂/㎠/ppb down to 0.4 ppb Hg. The method developed was successfully applied to the determination of mercury in samples such as river, waste water, and sea water.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.6
• /
• pp.335-343
• /
• 2012

Mercury is emitted to the atmosphere from various natural and anthropogenic sources, and degrades with difficulty in the environment. Mercury exists as various species, mainly elemental ($Hg^0$) and divalent ($Hg^{2+}$) mercury depending on its oxidation states in air and water. Mercury emitted to the atmosphere can be deposited into aqueous environments by wet and dry depositions, and some can be re-emitted into the atmosphere. The deposited mercury species, mainly $Hg^{2+}$, can react with various organic compounds in water and sediment by biotic reactions mediated by sulfur-reducing bacteria, and abiotic reactions mediated by sunlight photolysis, resulting in conversion into organic mercury such as methylmercury (MeHg). MeHg can be bioaccumulated through the food web in the ecosystem, finally exposing humans who consume fish. For a better understanding of how humans are exposed to mercury in the environment, this review paper summarizes the mechanisms of emission, fate and transport, speciation chemistry, bioaccumulation, levels of contamination in environmental media, and finally exposure assessment of humans.