• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.277-284
• /
• 2013

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under thermal chemical vapor deposition system. The Ni layer on the $SiO_2$ substrate was used as a catalyst for the formation of the carbon coils. The characteristics (formation densities, morphologies, and geometries) of the as-grown carbon coils on the substrate with or without the $H_2$ plasma pretreatment process were investigated. By the relatively short time (1 minute) $H_2$ plasma pretreatment on the Ni catalyst layered-substrate prior to the carbon coils synthesis reaction, the dominant formation of the carbon microcoils on the substrate could be achieved. After the relatively long time (30 minutes) $H_2$ plasma pretreatment process, on the other hand, we could obtain the noble-shaped geometrical nanostructures, namely the formation of the numerous carbon nanocoils along the growth of the carbon microcoils. This noble-shaped geometrical nanostructure seemed to play a promising role as the good catalyst support for holding the very tiny Ni catalyst grains.

• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.174-188
• /
• 2024

This review summarized research trends regarding sample collection methods, pretreatment method, and types of analysis devices for microplastics (MPs) in soil and groundwater matrices. Soil sampling considers the selection of sampling location, depth, and volume. The typically sampling depth is within 15 cm (topsoil), and about 1 kg of mixed each sample. Among spot sampling and continuous flow sampling, groundwater sampling mainly used a continuous flow sampling, with collection rates 2 to 6 L/min in the range of 300~1,000 L, and followed by immediate on-situ filtration. Pretreatment method, applied to soil and groundwater, consist of organic digestion and density separation. In the organic digestion method, H₂O₂ is recommended among H₂O₂, acidic, alkaline, and enzymatic method. NaCl is primarily used as a reagent in density separation. However, depending on the density of MPs, other regents can be selectively used like ZnCl₂, ZnBr₂, and etc. Representative analysis device includes Fourier Transform Infrared (FTIR) and Raman spectroscopy for non-destructive analysis and Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) for destructive analysis. µ-FTIR and Raman can count MPs of larger than 10 and 1 ㎛, and analyze MPs materials. However, it is need to sufficiently remove interference, like organic matter, in spectroscopic analysis using essential pretreatment method. Py-GC/MS is being continuously researched because it doesn't require complex pretreatment method and allows quantitative analysis of specific materials.

• New & Renewable Energy
• /
• v.4 no.1
• /
• pp.37-43
• /
• 2008

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This paper describes the results for the mechanical and environmental tests of pretreatment system material. Mechanical Characteristics make differences between parent / weldment, Notch existence / non-existence and air/$H_2O$ conditions. As a result, the life of pipe lines needs to maintain and fit for the operating period. Based on actual situations, the tension test of pipe welding-parts is carried out varying the exposure time of hydrogen sulfide and the fatigue resistance test is also performed inserting a notch into the pipe welding part, being exposed to the hydrogen sulfide environment for 720 hours.

• Journal of Wetlands Research
• /
• v.24 no.2
• /
• pp.83-92
• /
• 2022

The amount of the plastic waste has been increasing according to global demand for plastic. Microplastics are the most hazardous among all plastic pollutants due to their toxicity and unknown physicochemical properties. This study investigates the optimal methodology that can be applied to sewage samples for detecting microplastics before discussing reducing microplastics in MWTPs. In this study, the effect of different pretreatment methods while detecting microplastic analysis of MWTP influent samples was investigated; the samples were collected from the J sewage treatment plant. There are many pretreatment methods but two of them are widely used: Fenton digestion and hydrogen peroxide oxidation. Although there are many pretreatment methods that can be applied to investigate microplastics, the most widely used methods for sewage treatment plant samples are Fenton digestion and H₂O₂ oxidation. For each pretreatment method, there were factors that could cause an error in the measurement. To overcome this, in the case of the Fenton digestion pretreatment, it is recommended to proceed with the analysis by filtration instead of the density separation method. In the case of the H₂O₂ oxidation method, the process of washing with distilled water after the reaction is recommended. As a result of the analysis, the concentration of microplastics was measured to be 2.75ea/L for the sample using the H₂O₂ oxidation method and 3.2ea/L for the sample using the Fenton oxidation method, and most of them were present in the form of fibers. In addition, it is difficult to guarantee the reliability of measurement results from quantitative analysis performed via microscope with eyes. A calibration curve was created for prove the reliability. A total of three calibration curves were drawn, and as a result of analysis of the calibration curves, all R² values were more than 0.9. This ensures high reliability for quantitative analysis. The qualitative analysis could determine the series of microplastics flowing into the MWTP, but could not confirm the chemical composition of each microplastic. This study can be used to confirm the chemical composition of microplastics introduced into MWTP in the future research.

• BMB Reports
• /
• v.48 no.11
• /
• pp.636-641
• /
• 2015

There are controversial findings regarding the roles of nuclear factor (erythroid-derived 2)-like 2 (Nrf2)/heme oxygenase-1 (HO-1) pathway on bone metabolism under oxidative stress. We investigated how Nrf2/HO-1 pathway affects osteoblast differentiation of MC3T3-E1 cells in response to hydrogen peroxide (H₂O₂), N-acetyl cysteine (NAC), or both. Exposing the cells to H₂O₂ decreased the alkaline phosphatase activity, calcium accumulation, and expression of osteoblast markers, such as osteocalcin and runt-related transcription factor-2. In contrast, H₂O₂ treatment increased the expression of Nrf2 and HO-1 in the cells. Treatment with hemin, a chemical HO-1 inducer, mimicked the inhibitory effect of H₂O₂ on osteoblast differentiation by increasing the HO-1 expression and decreasing the osteogenic marker genes. Pretreatment with NAC restored all changes induced by H₂O₂ to near normal levels in the cells. Collectively, our findings suggest that H₂O₂-mediated activation of Nrf2/HO-1 pathway negatively regulates the osteoblast differentiation, which is inhibited by NAC.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.495-502
• /
• 2013

This work was performed to investigate proper condition of coagulation treatment as UF process pretreatment that consider UF permeate flux and residual Al concentration. The coagulant used an alum as $Al_2(SO_4)_3{\cdot}16H_2O$ and PACl (r = 1.5) made this study. The experiment was tested in adjusting conditions such as alum dose, flocculation time and coagulation pH of seawater. Consequently, higher coagulant dose lead to elevation of UF permeate flux while residual aluminium also increased in condition of pH 8.0. The most suitable condition which has a good permeate flux and low residual aluminium, in this works, was coagulant dose of 0.7 mg/L (as Al, alum) and 1.2 mg/L (as Al, PACl) and coagulation pH 6.5. In addition, applying the flocculation time with 1.2 mg/L of PACI reduced. The flocculation time reduced UF permeate flux in using alum.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.731-735
• /
• 2000

The acid digestion bomb pretreatment method for the determination of antimony in a commercial fire retardant material sample (DBDPE-$Sb_2O_3$) was studied. DBDPE-$Sb_2O_3$ sample was digested with $H_2SO_4:HCl$(1:2) mixture in digestion bomb at $220^{\circ}C$ for 2 hrs. and antimony was determined by atomic absorption spectrophotometry. Recovery of 99.6-99.8% and C.V. of 0.94-1.07% for Sb was obtained for spiked real samples. In the present method, the analytical results obtained for antimony were 40.3 and 36.3% (w/w), respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.120-120
• /
• 2003

MOCVD법으로 TiN 표면에 Ru을 증착함에 있어서 Ru의 핵생성을 고양시키기 위한 ECR plasma 전처리 세정이 필요하다. 본 연구에서는 Ru 증착시 ECR $H_2O$$_2$, AE Plasma 전처리 세정 효과를 SEM, AES, XRD로 분석하였다. Ru의 핵생성은 ECR H$_2$, Ar Plasma의 노출시간이 증가할수록 향상된 반면, ECR $O_2$ plasma의 경우 노출시간이 증가할수록 핵생성 효과는 감소하였다. H$_2$ plasma 내의 H$_2$ion은 Ti와 NH$_3$를 형성하기 위해서 TiN과 반응하여 TiN을 Ti로 개질 시켰으며, Ar plasma 전처리 세정하는 동안 Ar plasma 내의 Ar ion은 TiN 또는 TiON 표면의 질소와 산소원자를 제거하는 효과를 나타내었다. 그 결과 TiN 표면상에서도 Ru의 핵생성이 쉽게 이루어졌으며 H$_2$, Ar ECR Plasma 전처리 세정에서 RU 핵생성이 향상되는 결과를 얻었다. 세 종류의 plasma중에서 Ar ECR plasma로 전처리 세정한 경우에 가장 높은 Ru 핵생성 밀도를 얻을 수 있었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.11a
• /
• pp.433-434
• /
• 2004

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.163-163
• /
• 2003

TiN barrier막 위에 metal organic chemical deposition(MOCVD)법으로 RuO$_2$ 를 증착시 TiN막 표면을 세정처리하지 않을 경우 RuO$_2$의 핵생성이 어렵고, 그로 인해 RuO$_2$ 연속막이 형성되기 힘들다. 그러므로 RuO$_2$의 핵생성을 향상시키기 위해 TiN막에 대한 전처리 세정이 필수적이다. TiN막의 전처리 세정방법으로 ECR plasma 세정법을 사용하였으며, $O_2$ plasma와 H$_2$ plasma 그리고 Ai plasma를 이용해 각각의 exposure time을 변화시키며 전처리 세정을 실시하였다. H$_2$ plasma와Ar plasma의 exposure time이 증가됨에 따라 RuO$_2$의 핵생성이 향상되었다. 본 연구에서는 scanning electron microscopy(SEM), Auger electron emission spectrometry(AES), Atomic Force Microscope(AFM), X-ray diffraction (XRD) 등의 분석을 통해 TiN막 표면에 대한 ECR plasma 전처리 세정 이 RuO$_2$의 핵생성과 연속막 성장에 미치는 효과에 대해 조사하였다.