• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.293-302
• /
• 2014

Simultaneous time monitoring observations of $H_2O$ $6_{16}-5_{23}$, SiO J = 1-0, 2-1, 3-2, and $^{29}SiO$ ${\upsilon}=0$, J = 1-0 lines are carried out in the direction of the Mira variable star TX Cam with the Korean VLBI Network single dish radio telescopes. For the first time, the $H_2O$ maser emission from TX Cam is detected near the stellar velocity at five epochs from April 10, 2013 (${\phi}=3.13$) to June 4, 2014 (${\phi}=3.89$) including minimum optical phases. The intensities of $H_2O$ masers are very weak compared to SiO masers. The variation of peak antenna temperature ratios among SiO ${\upsilon}=1$, J = 1-0, J = 2-1, and J = 3-2 masers is investigated according to their phases. The shift of peak velocities of $H_2O$ and SiO masers with respect to the stellar velocity is also investigated according to observed optical phases. The $H_2O$ maser emission occurs around the stellar velocity during our monitoring interval. On the other hand, the peak velocities of SiO masers show a spread compared to the stellar velocity. The peak velocities of SiO J = 2-1, and J = 3-2 masers show a smaller spread with respect to the stellar velocity than those of SiO J = 1-0 masers. These simultaneous observations of multi-frequencies will provide a good constraint for maser pumping models and a good probe for investigating the stellar atmosphere and envelope according to their different excitation conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.645-654
• /
• 1994

Photocatalytic oxidation conditions of reactant recirculation flow rate 275 mL/min, aeration rate 2 LPM and $UV+TiO_2+H_2O_2$(500 mg/L) proved to be appropriate for water including organic materials treatment. With increasing turbidity and suspended solids concentration, at turbidity 10 NTU-suspended solids concentration 29 mg/L the phenol degradation efficiency increased, which in turn decreased at turbidity 50 NTU-suspended solids concentration 170 mg/L, however no significant differences were observed, demonstrating similar results with those obtained at zero turbidity and suspended solids concentration. The degradation efficiency of phenol decreased with increasing influent phenol concentrations. The $UV+TiO_2+H_2O_2$ photocatalytic advanced oxidation process conducted is considered to be possibly applied to the drinking water treatment, and the post-treatment process of biological wastewater treatment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.593-596
• /
• 2002

This study examined the feasibility of Electrokinetic-Fenton process for remediation of contaminated kaolinite by phenanthrene. The test using 7% H$_2$O$_2$as anode purging solution indicated the higher electrical current and electroosmotic flow than the test using 3.5% H$_2$O$_2$. And distribution in the soil of H$_2$O$_2$concentration showed the higher value of the former than the latter. Furthermore, the test using 7% H$_2$O$_2$and 0.01N H$_2$SO$_4$was the highest electrical current and electroosmotic flow and H$_2$O$_2$was effectively introduced to the cathode region. As it turned out, the treatment effect of phenanthrene was improved in compare with the other tests.

• Nano
• /
• v.13 no.12
• /
• pp.1850137.1-1850137.9
• /
• 2018

A series of silica surface-capped with hexamethyldisilazane (denoted as $H-SiO_2$) were prepared by liquid-phase in-situ surface-modification method. The as-obtained $H-SiO_2$ was incorporated into acrylic amino (AA) baking paint to obtain AA/$H-SiO_2$ composite extinction paints and/or coatings. $N_2$ adsorption-desorption tests were conducted to determine the specific surface area as well as pore size and pore volume of $H-SiO_2$. Moreover, the effects of $H-SiO_2$ matting agents on the physical properties of AA paint as well as the gloss and transmittance of AA-based composite extinction coatings were investigated. Results show that $H-SiO_2$ matting agents possess a large specific surface area and pore volume than previously reported silica obtained by liquid-phase method. Besides, they have better dispersibility in AA baking paint than the unmodified silica. Particularly, $H-SiO_2$ with a silica particle size of $6.7{\mu}m$ and the dosage of 4% (mass fraction) provides an extinction rate of 95.2% and a transmittance of 79.3% for the AA-based composite extinction coating, showing advantages over OK520, a conventional silica matting agent. Along with the increase in the silica particle size, $H-SiO_2$ matting agents cause a certain degree of increase in the viscosity of AA paint as well as a noticeable decrease in the gloss of the AA-based composite extinction coating, but they have insignificant effects on the hardness and adhesion to substrate of the AA-based composite coatings. This means that $H-SiO_2$ matting agents could be well applicable to preparing low-viscosity and low-gloss AA-based matte coatings.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.303-306
• /
• 2016

An optimum route to synthesize Ti-Mo system powders is investigated by analyzing the effect of the heat treatment atmosphere on the formation of the reaction phase by dehydrogenation and hydrogen reduction of ball-milled $TiH_2-MoO_3$ powder mixtures. Homogeneous powder mixtures with refined particles are prepared by ball milling for 24 h. XRD analysis of the heat-treated powder in a hydrogen atmosphere shows $TiH_2$ and $MoO_3$ peaks in the initial powders as well as the peaks corresponding to the reaction phase species, such as $TiH_{0.7}$, TiO, $MoO_2$, Mo. In contrast, powder mixtures heated in an argon atmosphere are composed of Ti, TiO, Mo and $MoO_3$ phases. The formation of reaction phases dependent on the atmosphere is explained by the partial pressure of $H_2$ and the reaction temperature, based on thermodynamic considerations for the dehydrogenation reaction of $TiH_2$ and the reduction behavior of $MoO_3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.551-554
• /
• 2000

The stability of $Pr_6$$O_{11}$-based ZnO varistors doped with $Y_2$$O_3$ was investigated under various d.c. stresses. The varistors were sintered at $1350^{\circ}C$ for 1h in the addition range of 0.0 to 4.0 mol% $Y_2$$O_3$. The varistors doped with $Y_2$$O_3$ exhibited much higher nonlinearity than that without $Y_2$$O_3$. In Particular, the varistors containing 0.5 mol% $Y_2$$O_3$ showed very excellent V-I characteristics, which the nonlinear exponent was 51.19 and the leakage current was 1.32 $\mu\textrm{A}$. And these varistors also showed an excellent stability, which the variation rate of the varistor voltage and the nonlinear exponent were -0.80% and -2.17%, respectively, under 4th d.c. stress, such as (0.80 $V_ {1mA}$/$90^{\circ}C$/12h)+(0.85 $V_{1mA}$/$115^{\circ}C$/12h)+(0.90 $V_{1mA}$/$120^{\circ}C$/12h)+(0.95 $V_{1mA}$/$125^{\circ}C$/12h). Consequently, since $Pr_ 6$$O_{11}$-based ZnO varistors doped with 0.5 mol% $Y_2$$O_3$ have an excellent stability as well as good nonlinearity, it is expected to be usefully used to develop the superior varistors in future.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.48-53
• /
• 2006

The purpose of this paper is to investigate the optimal condition of the SynGas production by reforming of propane using plasmatron. Plasma was generated by air and arc discharge. The effects of applied steam, $CO_2$ or Ni-catalyst on propane conversion, yield of hydrogen and $H_2/CO$ ratio as well as correlation of syngas were studied. When the variations of $O_2/C_3H_8$ flow ratio, $H_2O/C_3H_8$ flow ratio and $CO_2/C_3H_8$ flow ratio were $0.94{\sim}1.48,\;4.3{\sim}10\;and\;0.8{\sim}3.05$ respectively, Under the condition mentioned above, result of $H_2O/C_3H_8$ flow ratio was maximum $H_2$ concentration, or $28.2{\sim}31.6%$, and result of $H_2O/C_3H_8$ flow ratio with catalyst was minimum CO concentration or $6.6{\sim}7.1%$ and the ratio of hydrogen to carbon monoxide($H_2/CO$) were $3.89{\sim}4.86$.

• Journal of the Korean Ceramic Society
• /
• v.43 no.7 s.290
• /
• pp.402-407
• /
• 2006

NiO/YSZ(70 wt%NiO) composite powders were prepared by ball-milling of 8YSZ and NiO precursors, dried and then followed by calcination. The approach was to combine acidic $Ni(NO_3)_2{\cdot}6H_2O$ and basic $2NiCO_3{\cdot}3Ni(OH)_2{\cdot}4H_2O$ via acid-base reaction as a mixed NiO precursor. Their effects were studied in the aspects of DSC, microstructure, porosity, and electrical conductivity. Ni/YSZ composite of 1N9C (1 mole NiO from the nitrate and 9 moles of NiO from the carbonate) was prepared by consolidation at $1400^{\circ}C$ for 3 h, and then followed by reduction at $1000^{\circ}C$ for 3 h under flowing of 6% $H_2/N_2$. It showed a homogeneous microstructure with ${\sim}20%$ porosity and 1880 S/cm at $1000^{\circ}C$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.397-410
• /
• 1997

An annular denuder filter pack sampling system (ADS) was used to collect acidic air pollutants in Pusan. During the study period (from June 1995 to November 1995), forty eight samples were collected every 12 hours starting from 6:00 in the morning. These samples were devided into two sets of data for day (6:00 a.m.-6:00 p.m.) and night (6:00 p.m.-6:00 a.m.). The chemical species were analyzed for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$ in the gas Phase, and N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^{+}$ in the particulate phase. The mean concentrations measured from this study were 0.24, 1.91, 30.07 and 4.24 $\mu\textrm{g}$/㎥ for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$, respectively. The mean concentrations of N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^+{\ulcorner}$ were 1.95, 7.36 and 3.48 $\mu\textrm{g}$/㎥, respectively. The mean concentrations of gaseous species except for HN $O_2$ were higher in daytime than in nighttime, but the reverse was true in the particulates except for N $H_4$$^{+}$. +/..

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1156-1158
• /
• 1993

Undoped ZnO films were prepared on Soda lime glass using pyrosol deposition method starting from the solutions composed of $ZnO(CH_3COO){_2}\;2H_2O-H_2O-CH_3OH$. Surface morphology revealed ZnO films were polycrystalline above $400^{\circ}C$ substrate temperature in $H_2O$ only solvent $H_2O-CH_3OH$ solvent revealed more good result than $H_2O$ only solvent. the lowest resistivity of as-deposit ZnO films was 4 ${\Omega}$-Cm and transmittance at 550nm was 85%. post-annealing of as-deposited films in a vacuum leads to s reduction in resistivity without affecting the optical transmittance.