• Title/Summary/Keyword: $H_2O $

Search Result 18,265, Processing Time 0.055 seconds

Plasma Aided Flotation for Removing Organic Substances and Killing Microorganisms

  • Yu, Seung-Min;Hong, Eun-Jeong;Yu, Seung-Yeol;Park, Jun-Seok;No, Tae-Hyeop
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.122-122
    • /
    • 2014
  • 수중방전을 환경분야에 적용하기 위한 플라즈마 부상법이 개발되었다. 플라즈마 부상법은 물 속에서 발생시킨 플라즈마가 가지고 있는 주요특성 중 물리적 특징인 쇼크웨이브, UV조사, 버블생성 등과 화학적 특징인 OH라디칼 및 염소산화물 생성 등을 이용하여 물 속에 존재하는 용존성 및 입자성 물질을 부상분리 기법으로 제거하는 공법이다. 유기물을 제거하는 기작으로는 침전, 여과, 분해 등이 있고, 이를 구현하기 위한 공정으로 중력침강법, 부상분리법, 멤브레인법, 미생물법 등이 있다. 이 중에서 가압공기부상법은 침강법에 비해 부지면적을 적게 소모하고 처리시간이 50% 이상 감소되는 특징이 있다. 가압공기부상법은 물 속에 공기를 과포화시킨 후 노즐을 통해 재분사할 때 발생하는 압력차에 의해 미세기포가 발생함을 이용하여 유기물을 분리하는 공법이다. 그러나, 가압용 장비 및 반송수가 필요하고, 미생물분리는 불가능한 단점이 있다. 이에 본 연구에서는 미생물살균과 유기물 분리가 동시에 일어나는 플라즈마를 이용한 부상분리기법을 개발하였다. 본 연구에서는 난분해성 용존유기물인 휴믹산 100 mg/L의 플라즈마 공기부상법에 의한 제거능을 확인하였다. 용존성 휴믹산을 입자성 물질로 전환하여 플록을 형성시키고자 알루미늄설페이트(Al2(SO4) $3{\cdot}18H2O$)를 100 mg/L 주입하였고, 침출수와 같이 염도가 높은 물을 모사하고자 35 g/L의 염화나트륨을 첨가한 상태에서 방전을 실시하였다. 방전에 사용된 전원은 EESYS사에서 제작한 펄스형 고전압 전원장치를 사용하였고 최대 15 kW의 출력 중 6 kW의 전력을 인가하였다. 전극 한 개는 2 mm 텅스텐봉을 세라믹튜브로 감싼 구조로 총 사용전극은 28개이다. 전극 한 개당 대략 200 Watt의 전력이 소모되며 이 때 최대의 버블이 생성됨을 확인하였다. 전극 1개에서 생성되는 버블의 부피는 14 mL/min 로 측정되었다. 버블의 크기는 평균 70 um이고 가압공기부상법에서 최적공기크기로 제시하고 있는 40~80 um 의 버블은 약 80% 가량 생성된다. 본 연구에서 사용된 반응시스템에서의 물의 높이는 약 500 mm 이고 전체 40 L의 수조가 3개의 벽으로 분리되어 4개의 수조로 분리되었다. 각 수조는 하부에 7개의 전극을 포함하고 있다. 플라즈마 발생시 생성되는 기포는 약 1분 방전 후에 포화농도에 도달하며 방전종료 후 약 4분간 수체 내에 남아있게 된다. 이를 공정에 적용하여 1분 방전 및 4분 휴지의 순서로 플라즈마를 인가하였다. 휴믹산 용액의 유량을 2 lpm 으로 운전하였을 때 최종 처리율은 94% 이고 이때의 대장균 살균능은 99%이다.

  • PDF

Preparation of Silica Films by Surface Tension Control (표면장력 제어를 이용한 실리카 박막의 제조)

  • Lee, Jae-Jun;Kim, Yeong-Ung;Jo, Un-Jo;Kim, In-Tae;Je, Hae-Jun;Park, Jae-Gwan
    • Korean Journal of Materials Research
    • /
    • v.9 no.8
    • /
    • pp.804-809
    • /
    • 1999
  • Silica films were prepared on Si single crystal substrates by a sol-gel process without DMF using TEOS as a starting material. Films were fabricated by spin coating technique. For films having a composition of TEOS : HCI(1:0.05mol), gelation time, the thickness of films, the formation of cracks and the microstructure of the films were investigated as a function of the molar ratio of $CH_3OH and H_2O$. With 8mol $CH_3OH$, the longest gelation time was measured to be 640hr. The thickness of the coated films was decreased with increasing content of $CH_3OH$. The films were sintered at $500^{\circ}C$ for 1hr with a heating rate of $0.6^{\circ}C$/min. The coated films showed worm-like grains and partially cracked microstructures at an amount of $CH_3OH$ 2mol and 4mol. The addition of more than 8 mole of $CH_2OH$ resulted in crack-free silica films. This suggests that crack-free films can be fabricated by controlling the surface tension energy of the sol solutions without DMF.

  • PDF

The Study on Desalting Method for Removing Chloride ions and Corrosion Products of Iron artifacts (철제유물의 탈염처리 방법 및 부식생성물에 관한 연구)

  • Yu, Jae Eun;Hwang, Hyun Sung;Koh, Kyong Shin
    • 한국문화재보존과학회:학술대회논문집
    • /
    • 2002.02a
    • /
    • pp.45-52
    • /
    • 2002
  • 본 연구에서는 KaOH, $K_2CO_3$, Sodium, 그리고 1차 이온수 용액의 $Cl^-$ 이온 추출량과 부식생성물의 생성순위, 부식물 생성, 그리고 부식물 제거에 관하여 관찰하였으며 이 연구로 아래와 같은 결과를 얻었다. $Cl^-$ 이온 추출량에 대한 실험 결과 NaOH은 탈염 초기에는 Cl- 이온을 잘 추출시켰으나 탈염 횟수가 증가하면서 $Cl^-$ 이온의 추출량이 급감하였다. 또한 유물 중량 변화에도 감소폭이 가장 심하였다. $K_2CO_3$은 NaOH나 1차이온수 용액과 비교해 보면 이 방법은 탈염처리동안 $Cl^-$ 이온을 꾸준히 추출시켜 주었으며 다른 탈염용액에 비해 유물 중량변화가 거의 관찰되지 않았다. Sodium 용액은 $K_2CO_3$ 용액과 마찬가지로 탈염처리 동안 $Cl^-$ 이온을 꾸준히 추출시켰으며 다른 탈염 용액에 비해 $Cl^-$ 이온 추출량이 가장 많았다. 하지만 이 용액은 약품 내에 불순물인 $Cl^-$ 이온을 $3\~5\;ppm$을 기지고 있어 보존처리자가 탈염처리를 할 때 좀 더 신중하게 생각해야 할 것 같다. 1차 이온수 용액은 부식인자가 $Cl^-$이온을 완전하게 제거해주지는 못하였지만, pH가 $7.5\~7.9$로 다른 탈염 용액에 비해서 전위차가 낮으며, 별도로 탈알칼리 처리를 하지 않아도 되기 때문에 유물손상은 극소화할 수가 있다. 따라서 이 용액은 부식이 매우 심한 철제 유물이나 균열이 많은 주조 철편과 같은 유물을 처리할 때 적절한 용액이다. 부식생성물 관찰에서는 출토 철기 유물에 생성된 부식물은 주로 인철광$(\gamma-FeOOH)$, 침철광$(\alpha-FeOOH)$, 적금광$(\beta-FeOOH)$, 그리고 자철광$(Fe_3O_4)$이다. 인위적 부식에서는 전부 인철광의 부식물이 생성되었고 자연적 부식에서는 모두 침철광의 부식물이 생성되었다. 특히 철제 표면에 자연적으로 생성된 공식 녹을 XRD 분석한 결과 적금광으로 동정되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.

  • PDF

Studies on the Selenium Type and Metabolism of Selenium Accumulation in the Selenium-Enriched Mushroom, Flammulina Velutipes, and Its Spent Mushroom Composts (셀레늄 강화 팽이버섯과 폐배지의 셀레늄 형태 및 팽이버섯내 셀레늄 축적대사에 관한 연구)

  • Lee, S.H.;Kwak, W.S.;Kim, W.Y.
    • Journal of Animal Science and Technology
    • /
    • v.47 no.2
    • /
    • pp.305-316
    • /
    • 2005
  • This study was conducted to determine the total amount and type of seleniwn (Se) in the Se-enriched mushroom and its spent mushroom composts (SMC), and to investigate the metabolism in relation to Se accwnulation in the mushroom. Mushrooms, Flammulina velutipes, used in this study were grown for 60 days by adding 2 rng of inorganic Se (Na2Se03) per kg of mushroom composts (MC) on as-fed basis and were compared with normal mushrooms grown on the non Se-supplemented Me. Total Se contents for Se-treated mushrooms were significantly increased (P < 0.0001) by 20-fold (4.51 $\mu$/ g of dry) compared to Se-untreated (0.23 $\mu$/ g of dry). On the contrary, organic Se ratio was significantly lower (P < 0.0001) in the Se-treated mushroom (72.3 %) than the Se-untreated one (100 %, not analytically detected of inorganic Se). Se distribution upon a length in the Se-treated mushrooms was the highest in the bottom part (6.86 $\mu$/ g of dry) near to MC, and top and middle parts were significantly lower (3.71 and 3.01 $\mu$/ g of dry, respectively; P < 0.001) than the bottom. In the SMC from Se-treated mushrooms, the significant amount of Se (5.04l1g/g of dry) was remained, but that from the Se-untreated mushrooms was significantly low (P$\mu$ / g of dry. Se-treated SMC showed a high ratio of organic Se (65.67 %), suggesting that the significant amount of inorganic Se in the SMC was converted to organic Se by mushroom mycelia. Prior to mycelia inoculation in the mushroom culture, the sterilization of MC brought approximately 18% of Se loss in the MC. Apparent and net accumulation rates (%) for Se into mushrooms were 14.81 and 10.14 %, respectively, resulting from the Se volatilization into the air via metabolic process of mushroom itself. The result of this study shows that inorganic Se addition to MC for mushroom improved the organic Se contents in the mushroom and SMC. This study showed the possibility that Se in Se-enriched mushroom and SMC could be utilized as Se sources of food for human as well as feed for livestock.

Production of Lactulose by Biological Methods and Its Application (생물학적 방법을 통한 기능성 이당 lactulose의 생산과 응용 연구)

  • Kim, Yeong-Su;Kim, Do-Yeon;Park, Chang-Su
    • Journal of Life Science
    • /
    • v.26 no.12
    • /
    • pp.1477-1486
    • /
    • 2016
  • Lactulose (4-O-${\beta}$-D-galactopyranosyl-D-fructose) is a non-digestible synthetic ketose disaccharide which can used in food and pharmaceutical fields due to its useful functions for encephalopathy, chronic constipation, hyperammonemia, etc. Therefore, the lactulose is regarded as one of the most important disaccharides and have been concentrated much interesting as an attractive functional material in the current industry. From this reason, the research related on the production of lactulose has been carried out various academic and industrial research groups. To produce lactulose, two main methods, chemical production and enzymatic production have been used. Commercially lactulose produced by alkaline isomerization of lactose as chemical production method but it has many disadvantages such as rapid lactulose degradation, purification, and waste management. From these reasons, lactulose produced by enzymatic method which solves these problems has been suggested as a proper method for lactulose production. Two different enzymatic methods have been reported as methods for lactulose production. Lactulose can be obtained through hydrolysis and transfer reaction catalyzed by a ${\beta}$-galactosidase which requires fructose as co-substrate and exhibits a low conversion. Alternatively, lactulose can be produced by direct isomerization of lactose to lactulose catalyzed by cellobiose 2-epimerase which requires lactose as a single substrate and achieves a high lactulose yield. This review summarizes the current state of lactulose production by chemical and biological methods.

Development of Biologically Active Compounds from Edible Plant Sources XVI. -Isolation of Sterols from the Aerial Parts of Sajabalssuk (Artemisia herba)- (식용식물자원으로부터 활성물질의 탐색 XVI. -사자발쑥(Artemisia herba)의 전초로부터 sterol 화합물의 분리-)

  • Bang, Myun-Ho;Chung, Hae-Gon;Song, Myoung-Chong;Yoo, Jong-Su;Chung, Sun-A;Lee, Dae-Young;Kim, Se-Young;Jeong, Tae-Sook;Lee, Kyung-Tae;Choi, Myung-Sook;Baek, Nam-In
    • Applied Biological Chemistry
    • /
    • v.49 no.2
    • /
    • pp.140-144
    • /
    • 2006
  • Sajabalssuk (Artemisia herba) was extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH and $H_2O$, successively. From the EtOAc and n-BuOH fractions, four sterols were isolated through the repeated silica gel and ODS column chromatographies. From the results of physico-chemical data including NMR, MS and IR, the chemical structures of the sterols were determined as ${\beta}-sitosterol$ (1), ergosterol peroxide (2), stigmasterol (3) and daucosterol (4). They were the first to be isolated from Sajabalssuk (Artemisia herba).

A Study on the Monodispersed Silica Fine Particles Prepared by Using Batch-Semibatch Mixed Process (회분과 반회분의 혼합형 공정에 의해 생성된 단분산 실리카 미립자에 관한 연구)

  • Kim, Ki Do;Kim, Hee Taik
    • Applied Chemistry for Engineering
    • /
    • v.10 no.8
    • /
    • pp.1180-1185
    • /
    • 1999
  • Modispersed silica fine particles were produced from the hydrolysis of $Si(OC_2H_5)_4$ by using batch-semibatch mixed systems. Four types of mixed process, i.e., batch-batch, batch-semibatch, semibatch-batch, semibatch-semibatch, were used in order to measure mean particle size, particle size distribution, yield, and packing density. As a result of the test, silica particles prepared by semibatch-semibatch process were larger than those prodeced from any other systems in particle size and yield. On the other hand, silica particles prepared by batch-semibatch process were better than those produced from any other systems in particle size distribution and packing density. Especially, it was found that particle size of $SiO_2$ prepared by semibatch-batch process decreased with increasing the reaction time. Therefore, batch-semibatch process was a successful method for controlling the size, i.e., a narrow distribution of a particle size which ranges to several microns.

  • PDF

Effect of N Application Rate on Fixation and Transfer from Vetch to Barley in Mixed Stands. (질소시용수준이 베치-보리 혼파 사초의 질소고정 및 베치에서 보리로 질소이동에 미치는 영향)

  • Lee Hyo Won;Kim Won Ho;Park Hyung Soo;Ko Han Jong;Kim Su Gon
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.25 no.1
    • /
    • pp.1-6
    • /
    • 2005
  • With recent interest organic farming the use of legumes including vetch and clover to provide N to adjacent crops is increasing in Korea. In the present studies, we conducted a trial to investigate the effects of the application of N rate on nitrogen fixation and transfer from vetch to barley in mixed stands. The experiment was arranged in a randomized complete block design with three replications. Four different N rates(0, 75, 113 and 150/ha) was used and vetch+barley was broadcasted manually on 1.5 $\times$2 m plot in Oct. 2001. Half of urea and K$_{2}O, 200 Phosphate and 75 kg potash per ha were applied as basal dressing md half of N md 75 potash were used for topdressing to soil surface on MarctL 2002. The equivalent of 1kg ha$^{-1}$ at($^{15}$NH$_{4}$)$_{2}$SO$_{4}$ solution at 99.8 atom $\%$$^{15}$N excess was applied to the microplot in mid April. Forage was harvested from each plot at ground level and separated into barley and vetch. Total N content and It values of samples were determined using a continuous flow stable isotope ratio mass spectrometry(IsoPrime-EA. Micromass, UK.). The percentage of legume H fixed from atmospheric N2 were 95.0, 93.8, 94.4 and $84.8\%$ with increment of N levels. The percentage of N transfer from vetch to barley by N-difference method with increment of N fertilizer were from 58 to$49\%$ while 39 to $23\%$ in $^{15}$N-dilution method. The amount of transfer from vetch to barley were 87 to 68 kg/ ha with N level by N-difference moth여 and 58 to -56/ha with N application levels by $^{15}$N dilution method. The amount of nitrogen fixation per ha were from 150 kg / ha to 219 kg / ha by different method, but on the other side 49 to 105kg/ha by N$^{15}$-dilution.

Development of New fall Cultivars with Yellow Fall Leaf Color in Zelkova serrata Makino (황색(黃色) 단풍(丹楓) 느티나무(Zelkova serrata Makino) 신품종(新品種) 육성(育成))

  • Shim, Kyung-Ku;Park, Hyung-Soon;Byun, Kwang-Ok;Ha, Yoo-Mi
    • Horticultural Science & Technology
    • /
    • v.17 no.2
    • /
    • pp.148-152
    • /
    • 1999
  • This study was carried out to develop new cultivars of Z. serrata showing yellow fall leaf. Z. serrata which had yellow fall leaves were selected and then examined for contents of leaf anthocyanin and chlorophyll. In addition, for the progeny test, selected trees were grafted. Of 21 trees having yellow autumn leaves, three individuals, 'S-4', 'S-14', and 'J-32' were finally selected. They contained high level of anthocyanin with higher level in the leaves. Once developed, the yellow color remained till late autumn. Grafted plants of the selected strains showed high grafting efficiency and vigorous growth. Yellow foliage color were found to be maintained in the grafted trees. The tree 'S-4' was 7 m tall and 6 m in crown width, whereas 'S-14' and 'J-32' were 6 m tall and 4m in crown width. The soil pH of the survey sites ranged from 5.9 to 7.24. However, other soil characteristics did not show much difference among the sites with regard to inorganic nutrients including $N,\;P_2O_5,\,CEC,\,K^+,\,Ca^{2+}$, and $Mg.^{2+}$ 'S-4', 'S-14', and 'J-32' clonal lines developing yellow fall leaf were selected as new cultivars and propagated by grafting.

  • PDF

Studies on Saccharification and Citric Acid Fermentation of Alcoholic Distillery Waste(I) (주정증류 폐기물의 당화 및 구연산 발효에 관한 연구(I))

  • 서명교;서근학송승그
    • KSBB Journal
    • /
    • v.5 no.4
    • /
    • pp.383-390
    • /
    • 1990
  • Alcoholic distillery waste was utilized as dual purposes to produce citric acid and to reduce the amount of waste to be treated. Enzyme and acid hydrolysis of this waste were studied to suggest effective way of present purpose. Enzymatic hydrolysis of this naked barley alcoholic distillery waste by $\alpha$-and $\beta$-amylase gave glucose as 8g/l concentration at $55^{\circ}C$ for 6 hours, which produced 1g/l citric acid and 5.33g/l mycelial. This waste material hydrolyzed with 25% HCl at $120^{\circ}C$ showed 21.5g/l glucose and produced 1.75g/l citric acid with 4.9g/1 mycelial. The glucose concentration was decreased to 3.44g/l by further 2nd acid hydrolysis because the monosugars were decomposed at prolonged hydrolysis conditions. The addition of 3g/l $NH_4NO_3$ increased the mycelial growth but reduced the amount of citric acid formed. The formation of citric acid was increased at low concentration of manganese ion.

  • PDF