• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.378-382
• /
• 1982

Green crystalline salts of substituted pyridinium oxopentachloromolybdates(V) were obtained from concentrated hydrochloric acid solution of molybdenum(V)-thiocyanate extract. $MoOCl_3(X-py)_2$ (X-py were 4-and 3-cyanopyridine, 2-amino-4-picoline and 4-acetylpyridine) were obtained by reflux of the corresponding substituted pyridinium salts of oxopentachloromolybdates(Ⅴ) in absolute ethanol. ($X-pyH_2$)[$MoOCl_5$]$H_2$O containing the $MoO^{3+}$ group are dissolved and hydrolysed in water but $MoOCl_3(X-py)_2$ are insoluble in water, alcohol and acetone. The complexes are paramagnetic compounds.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.62-68
• /
• 2001

The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of iron wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved iron. This study was aimed at gathering the basic data of iron wire dissolution- recovery process and proposes the reaction condition of iron wire dissolution- recovery process rind the factors influencing those reactions. The results were as follows : 1 . Hydrogen peroxide dissolution method used hydrochloric acid as the catalyst. 1. In the dissolution of iron wire(1.668 g), the condition of reaction was E1702(30 ml), HCI(20 ml) and $H_2O$(200 ml) ; time of the reaction was 18 min. P.W.(Piece weight) was 7.75 mg, and C.R. was $2.34{\;}{\Omega}$ 2. In the dissolution of iron wire(1.529 g), the condition of reaction was H7O2(30 ml), HCI(20 ml) and $H_2O$(200 ml), time of the reaction was 21 min., P.W.(Piece weight) was 7.73 mg, and C.R. was $2.35{\;}{\Omega}$. Hydrogen peroxide dissolution method used sulfuric acid as the catalyst. 1. In the dissolution of iron wire(0.834 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and 1702(5 ml) ; time of the reaction was 5 min.30 sec, P.W.(Piece weight) was 7.74 mg, and C.R. was $2.33{\;}{\Omega}$ 2. In the dissolution of iron wire(1.112 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and $H_2O_2$(5 ml) ; time of the reaction was 4 min.30 sec, P.W.(Piece weight) was 7.75 mg, and C.R. was $2.33{\;}{\Omega}$. Hydrogen peroxide dissolution method used hydrochloric acid and sulfuric acid as the catalyst confirmed a clean technology, because there were not occurred a pollutant discharged in the existing method.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.100-105
• /
• 1995

Media optimization for the production of MR-387A and B, novel aminopeptidase M inhibitors by Streptomyces sp. SL-387 isolated from a soil was studied. Optimized medium was consisted of 1% glucose, 3% soybean meal, 0.2% yeast extract, 0.1% beef extract, 0.3% NaCl, 0.01% $K_2HPO_4$, 0.3% $CaCO_3$, 0.001% $MnCl_2{\cdot}4H_2O$, 0.001% $ZnCl_2{\cdot}7H_2O$, and 0.0005% $MgSO_4{\cdot}7H_2O$, and adjusted to pH 7.0 before autoclaving. When the optimized medium was used as a fermentation medium, maximum productivity of MR-387 was reached at 120 hours of fermentation, and total productivity was 909.1 U/ml.

• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.56-66
• /
• 1999

Growth of Dendranthema grandiflorum R. ‘Bongwhang’plantlets, as affected by three levels of photosynthetic photon flux (PPF), 70, 150 and 220 $\mu$mol. $m^{-2}$ . $s^{-1}$ , three levels of C $O_{2}$ concentration, 400-500 (ambient), 1000 and 2000 $\mu$mol.mo $l^{-1}$ , and two levels of number of air exchanges per hour (NAEH), 0.1 $h^{-1}$ and 2.8 $h^{-l}$, was studied. Explants were obtained from photomixotrophically-micropropagated plantlets. Four explants were planted in each 3.7$\times$10$^{-4}$ $m^{3}$ polycarbonate box containing MS medium supplemented with 1.25 meq. $L^{-1}$ $H_{2}$P $O_{4}$$^{[-10]}$ and no added sugar. Explants were cultured under cool-white fluorescent lamps (16 h. $d^{-1}$ ), at 25$\pm$1$^{\circ}C$ temperature, and 70-80% relative humidity. In treatments of 2.8 $h^{-1}$ NAEH, a 10 mm round hole made on the vessel cap was sealed with a microporous filter For higher C $O_{2}$ concentrations in the culture room, C $O_{2}$ gas was provided from a tank of liquefied C $O_{2}$. Fresh and dry weights, height, length of the longest roots, number of leaves, and leaf area significantly increased with increasing PPF and especially, with increasing C $O_{2}$ concentration. Growth was enhanced with increased number of air exchanges per hour (2.8 $h^{-1}$ ). Overall, treatment of 220$\mu$mol. $m^{-2}$ . $s^{-1}$ PPF combined with 2000$\mu$mol.mo $l^{-1}$ C $O_{2}$ and 2.8 $h^{-1}$ NAEH gave the most vigorous growth of Dendranthema grandiflorum R. ‘Bongwhang’ plantlets in vitro.o.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.309-316
• /
• 2006

The $SnO_{2}$ thin film sensors were fabricated by a thermal oxidation method. $SnO_{2}$ thin film sensors were treated in $N_{2}$ atmosphere. The sensors with $O_{2}$ treatment after $N_{2}$ treatment showed 70 % sensitivity for 1 ppm $H_{2}S$ gas, which is higher than the sensors with only $O_{2}$ treatment. The Ni metal was evaporated on Sn thin film on the $Al_{2}O_{3}$ substrate. And the sensor was heated to grow the Sn nanowire in the tube furnace with $N_{2}$ atmosphere. Sn nanowire was thermally oxidized in $O_{2}$ environments. The sensitivity of $SnO_{2}$ nanowire sensor was measured at 500 ppb $H_{2}S$ gas. The selectivity of $SnO_{2}$ nanowire sensor compared with thin film and thick film $SnO_{2}$ was measured for $H_{2}S$, CO, and $NH_{3}$ in this study.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.1053-1059
• /
• 1994

The influence of ZrO2 addition on microstructre and mechanical strength of magnesia ceramics were discussed. ZrO2 was existed as a cubic phase resulted from MgO solubility into ZrO2 on firing at temperature range from 130$0^{\circ}C$ to 1$600^{\circ}C$ for 2 h. The addition of ZrO2 markedly promoted the densification of MgO also above 150$0^{\circ}C$ and the sintered density at 1$600^{\circ}C$, 2 h reached to 95.2% of the theoretical. The solubility of MgO into c-ZrO2 was about 7.68 wt% and it was segregated at grain boundary on cooling to room temperature. ZrO2 existing as a second phase retarded the grain growth of MgO. The bending strength were increased to 240 MPa with the amount of ZrO2.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.86-88
• /
• 2003

Gate 산화막을 high-k 물질인 $HfO_2$ 박막을 이용하여 N-type MOS field effect transistor를 제작하였다. 전극은 poly-Si 전극을 사용하였다. Gate 산화막은 ALD 로 $Hf(N(CH_3)_2)_4$ 원료를 이용하여 $HfO_2$ 박막을 형성하였다. 산화제는 $H_{2}O$ 와 $O_3$ 를 사용하였는데, $H_{2}O$ 가 약간 우수하였으나 그 차이는 크지 않았다. $HfO_2$ 를 증착하기 전에 in-situ 로 $O_3$ 를 흘려 줌으로써 $SiO_2$를 얇게 형성하였는데, 이 결과 threshold voltage 가 약 0.2V 높아지고 saturation current 가 커지는 것이 관찰되었다. 이러한 결과는 $HfO_2$ 박막을 직접 channel 위에 증착하는 것보다 $O_3$ 를 이용 얇은 $SiO_2$ 를 형성하고 그 위에 $HfO_2$ 박막을 증착하는 방법이 transistor의 특성을 향상시키는 데 도움이 된다.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.565-574
• /
• 1993

The Ar/Ar- $H_{2}$ plasma method Lvas applied to reduce and refine high purity Nb metal. Inaddition, the reaction between molten Nb metal and hydrogen were also analyzed in the Ar-(20%)$H_{2}$plasma. The metallic Nb of 99.5wt% was obtained at the ratio of $C/Nb_{2}O_{5}$=5.00 in the Ar plasma reductionand the $O_2$ loss from the thermal decomposition of niobium oxides did not take place. In the Ar-(20%)Hi plasma the metallic Nb of 99.8wt% was produced at the ratio of $C/Nb_{2}O_{5}$=4.80. It was observedthat a major reaction of the deoxidation was the reaction with H, Hi, and a deoxidation by the evaporationof $NbO_x$ did not occur but a mass loss of Nb did by a "splash" effect. The deoxidation reaction rateobeyed the 1st order reaction kinetics and the reaction rate constant(k') of deoxidation was $7.8 \times 10_{-7}$(m/sec).The solubility of hydrogen in Nb metal was 60ppm and it was larger than the solubility of molecularstate hydrogen by 40ppm in the Ar-(20%)$H_{2}$ plasma method. A saturation was within 60sec anda hydrogen content was reduced below lOppm by a Ar plasma re-treatment.by a Ar plasma re-treatment.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.830-836
• /
• 1997

The surface modification of iron oxide particle produced from steel-pickled acid by sodium-contained materials was studied. The molar ratio of $SiO_2$ to $Na_2O$ of sodium silicate was 1, 2, 3.5, respectively. The dispersion stability of iron oxide suspension as functions of amount of silica and pH was evaluated by surface charge and sedimentation velocity of iron oxide particle. Then the amount of sodium silicate was determined to provide a dispersion stability of iron oxide particle above pH 7. Finally, the surface modification of iron oxide particle with sodium silicate as silica-contained materials was done by wet ball milling. In the results of study, the dispersion stability of silica modified iron oxide particle was largely depended on amount of silica and pH together. The untreated iron oxide was unstable at pH 8, i.e. isoelectric point, but, the surface modified iron oxide particle with 0.8wt% silica was stable above pH 5. The dispersion stability was enhanced with 0.2wt% of anionic polyelectrolyte.

• Journal of applied mathematics & informatics
• /
• v.20 no.1_2
• /
• pp.541-548
• /
• 2006

We find a graded Artinian level O-sequence of the form $H\;:\;h_0\;h_1\;\cdots\;h_{d-1}\;h_d\cdots$ $^{(d+1-1_)-st}h_d$ < $h_{d+s}$ not having the Weak-Lefschetz property. We also introduce several algorithms for construction of some examples of non-unimodal level O-sequences using a computer program called CoCoA.