• Membrane and Water Treatment
• /
• 제14권3호
• /
• pp.129-140
• /
• 2023

The appropriate injection of H₂O₂ is essential to produce hydroxyl radicals (OH·) by mixing H₂O₂ quickly and exposing the resulting H₂O₂ solution to UV irradiation. This study focused on evaluating mixing device of H₂O₂ as a design factor of UV/H₂O₂ AOP pilot plant using a surface water. The experimental investigation involved both experimental and model-based analyses to evaluate the mixing effect of different devices available for the H₂O₂ injection of a tubular hollow pipe, elliptical type of inline mixer, and nozzle-type injection mixer. Computational fluid dynamics analysis was employed to model and simulate the mixing devices. The results showed that the elliptical type of inline mixer showed the highest uniformity of 95%, followed by the nozzle mixer with 83%, and the hollow pipe with only 18%, after passing through each mixing device. These results indicated that the elliptical type of inline mixer was the most effective in mixing H₂O₂ in a bulk. Regarding the pressure drops between the inlet and outlet of pipe, the elliptical-type inline mixer exhibited the highest pressure drop of 15.8 kPa, which was unfavorable for operation. On the other hand, the nozzle mixer and hollow pipe showed similar pressure drops of 0.4 kPa and 0.3 kPa, respectively. Experimental study showed that the elliptical type of inline and nozzle-type injection mixers worked well for low concentration (less than 5mg/L) of H₂O₂ injection within 10% of the input value, indicating that both mixers were appropriate for required H₂O₂ concentration and mixing intensity of UV/ H₂O₂ AOP process. Additionally, the elliptical-type inline mixer proved to be more stable than the nozzle-type injection mixer when dealing with highly concentrated pollutants entering the UV/H₂O₂ AOP process. It is recommended to use a suitable mixing device to meet the desired range of H₂O₂ concentration in AOP process.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.210-220
• /
• 1989

The properties of the powder of Al2O3-15v/o ZrO2(＋3m/o Y2O3) system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide decreased the specific surface area of aluminum hydroxide of AlOOH type, while increased the specific surface area of aluminum hydroxide of Al(OH)3 type, and formed co-network structure of Al-O-Zr type with the aluminum hydroxides. The rate of transition to $\alpha$-Al2O3 from co-precipitated materials occurred in the order of 7≒10, 9 and 11 of pH values. Al2O3 and ZrO2 interacted to bring about coupled grain growth, and the growth of ZrO2 crystallite size rapidly occurred within $\theta$-Al2O3 matrix. Segregation did not occur in the system Al2O3-15v/o ZrO2(＋3m/o Y2O3) and Y2O3 acted as a stabilizer to ZrO2. The lattice strain of tetragonal ZrO2 was increased by the constraint effect of Al2O3 matrix.

• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.90-95
• /
• 2000

The ferrites, CuFe2O4 and SrFe12O129, were applied to decompose H2O for H2 generation. The ferrites prepared by the coprecipitation were reduced by CH4 gas to make the oxygen deficient ferrite. H2O was decomposed to form H2 by the oxygen deficient iron oxide, and the decomposition reactions were accelerated by the addition of divalent metals such as Cu and Sr in the ferrites. The spinel type CuFe2O4 containing a relatively large amount of divalent metals was more effective to H2 generation than magnetoplumbite type SrFe12O19 in H2O decomposition.

• 분석과학
• /
• 제20권4호
• /
• pp.355-360
• /
• 2007

The title complex, $(C_3H_{12}N_2)[\{Cd(H_2O)(C_6H_5O_7)\}_2]{\cdot}6H_2O$, I, has been prepared and its structure characterized by FT-IR, EDS, elemental analysis, ICP-AES, and X-ray single crystallography. It is triclinic system, $P{\bar{1}}$ space group with a = 10.236(2), b = 11.318(2), c = $13.198(2){\AA}$, ${\alpha}=77.95(1)^{\circ}$, ${\beta}=68.10(1)^{\circ}$, ${\gamma}=78.12(1)^{\circ}$, V = $1373.5(3){\AA}^3$, Z = 2. Complex I has constituted by protonated 1,3-diaminopropane cations, citrate coordinated cadmium(II) anions, and free water molecules. The central cadmium atoms have a capped trigonal prism geometry by seven coordination with six oxygen atoms of three different citrate ligands and one water molecule. Citrate ligands are bridged to three different cadmium atoms. Each cadmium atom is linked by carboxylate and hydroxyl groups of citrate ligand to construct an one-dimensional ladder-type assembly structure. The polymeric crystal structure is stabilized by three-dimensional networks of the intermolecular O-H${\cdots}$O and N-H${\cdots}$O hydrogen-bonding interaction.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1057-1061
• /
• 2007

본 연구에서는 AlAs와 ZnO target을 사용하여 RF magnetron sputtering 시스템에서 layer-by-layer 방법으로 증착한 ZnO 박막의 특성에 대하여 조사하였다. 또한 열처리 전에 $H_2O_2$용액을 사용한 처리가 박막 특성에 미치는 영향도 조사하였다. 연구 결과 열처리 조건에 따라 n-형 또는 p-형 박막이 형성되는 것으로 관찰되었다. 이러한 결과는 박막의 전도 형태를 임의로 수정할 수 있음을 의미하는 동시에 박막 특성의 열적 불안정성을 암시하는 것이기도 하다. 144시간까지 스트레스를 인가한 후 측정한 박막 특성 결과 열처리 과정 중 발생하는 이러한 박막 특성 변화는 열처리 전 박막을 30% $H_2O_2$용액에 1분간 처리함으로써 억제할 수 있는 것으로 관찰되었다.

• Journal of Periodontal and Implant Science
• /
• 제37권4호
• /
• pp.655-669
• /
• 2007

Reactive oxygen species (ROS) have been implicated in the pathogenesis of various diseases. And vitamin C has shown a protective effect for the tissues. The aim of this study was to evaluate the effects of $H_2O_2$ and ascorbic acid on matrix metalloproteinase-1 (MMP-1), tissue inhibitor of metalloproteinase (TIMP: TIMP-1, TIMP-2), Type 1 collagen, fibronectin, and PDLs22 level in human periodontal ligament fibroblasts (hPDLF) via reverse transcription-polymerase chain reaction (RT-PCR). hPDLF was obtained from a healthy periodontium and cultured in Dulbecco's modified Eagles's medium plus 10% fetal bone serum. The concentration of ascorbic acid in hPDLF was $50{\mu}g/ml$, and that of $H_2O_2$ in hPDLF was 0.03% and 0.00003%. Ascorbic acid only, $H_2O_2$ only and mixture of ascorbic acid and $H_2O_2$ were applied with hPDLF for 1-, 3-, and 30-min. respectively. The gene expression of MMP-1-, TIMP-1-, TIMP-2-, Type 1 collagen-, fibronectin-, and PDLs22-mRNA in hPDLF was analysed via RT-PCR. The results were as follows; 1. hPDLF in response to 30-min. incubation with 0.03% $H_2O_2$ did not show any gene expression. 2. In all the experimental groups, the gene expression of fibronectin mRNA showed the decreased tendency compared to control. 3. In all the experimental groups, the gene expression of TIMP-1 mRNA showed the tendency similar to control. 4. hPDLF in response to 30-min. incubation with 0.03% $H_2O_2$ and ascorbic acid increased mRNA induction for MMP-1. 5. In all the experimental groups, hPDLF increased mRNA induction for PDLs22, collagen type 1, and TIMP-2 compared to control. Within the limited experiments, $H_2O_2$ and ascorbic acid increased mRNA induction for PDLs22, collagen type 1, TIMP-2 in hPDLF. More research will be needed in order to confirm the relative importance of the different roles of ROS and antioxidants in hPDLF from a periodontal regeneration or repair standpoint.

• 천문학회보
• /
• 제35권1호
• /
• pp.51.1-51.1
• /
• 2010

We present the interim results of simultaneous observations of SiO and H2O masers toward 401 known stellar SiO and/or H2O maser sources (166 both SiO and H2O maser sources, 83 only SiO maser sources, and 152 only H2O maser sources) using KVN_Yonsei telescope. The results of 166 known SiO/H2O maser sources will be presented by Kim et al. and the results of 83 only SiO maser sources and 152 only H2O maser sources presented here. Both SiO and H2O maser emission were detected from 30 sources giving a detection rate of 36 % toward known 83 only SiO maser sources, while they were detected from 66 sources giving a detection rate of 43 % toward known 152 only H2O maser sources at one epoch observation. Only SiO masers were detected from 42 sources toward 83 only SiO sources, while they were detected from 28 sources toward 152 only H2O sources. Characteristics of these observed sources in the IRAS two-color diagram is investigated including mutual relations between SiO and H2O maser emission. In addition, these results will be useful for statistical study of late-type stars and future VLBI observations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.143-143
• /
• 2010

In this study, we demonstrate that ZnO deposited onto $SiO_2$ substrates by magnetron sputtering produces p-type ZnO at higher $O_2$ pressure and n-type ZnO at lower $O_2$ pressure. We also report the effect of hydrogen peroxide ($H_2O_2$) on the stability of undoped ZnO thin films. The films were immersed in 30% $H_2O_2$ for 1 min at $30^{\circ}C$ and annealed in $O_2$at $450^{\circ}C$. The carrier concentration, mobility. and conductivity were measured by a Hall effect measurement system. The Hall measurement results for ZnO films untreated with $H_2O_2$ but annealed in $O_2$ indicate that oxygen fraction greater than ~0.5 produces undoped p-type ZnO films, whereas oxygen fraction less than ~0.5 produces undoped n-type ZnO films. This is attributed to the fact that the oxygen vacancies ($V_o$) decrease and the oxygen interstitials ($O_i$) or zinc vacancies ($V_{Zn}$) increase with increasing oxygen atoms incorporated into ZnO films during deposition and $O_2$ post-annealing.

• 자원환경지질
• /
• 제46권1호
• /
• pp.11-19
• /
• 2013

대화광상은 경기육괴의 편마암류와 화강암류에 발달한 열극을 충진 발달한 함 Mo-W 열수 맥상 광상이다. 대화광상의 몰리브덴-텅스텐 광화작용과 관련된 주요 수반광물인 석영에서 관찰되는 유체포유물은 상온 ($20^{\circ}C$) 에서의 상(phase) 관계와 냉각 및 가열 실험을 통해 측정된 균일화 온도와 상변화를 기초로 하여 3가지 주요 유형 (Type I, 액상이 우세한 $H_2O$-NaCl 유형; Type II, 기상이 우세한 $H_2O$-NaCl 유형; Type III; $CO_2-H_2O$-NaCl 유형) 으로 분류된다. 또한, 함 $CO_2$ Type III 유체포유물은 $CO_2$ 균일화 및 최종 균일화 특성을 바탕으로 4가지 유형 (IIIa, IIIb, IIIc, IIId)으로 세분된다. 대화광상 Type I 유체포유물의 균일화 온도는 약 $374^{\circ}C{\sim}161^{\circ}C$로 넓은 범위를 보여주며, 염농도 역시 약 13.6~0.5 equiv. wt. % NaCl의 넓은 조성 범위를 보인다. Type III 유체포유물 냉각 실험 시 측정된 $CO_2$ 상의 용융 온도는 $-57.4{\sim}-56.6^{\circ}C$이며, $CO_2$ 균일화 온도는 $29.0{\sim}30.8^{\circ}C$이다. 또한 $CO_2$ clathrate 용융 온도는 $7.3{\sim}9.5^{\circ}C$로 염농도는 5.2~1.0 equiv. wt. % NaCl이고, 최종 균일화 온도는 $303^{\circ}C{\sim}251^{\circ}C$로 비교적 좁은 범위로 확인되었다. $CO_2-H_2O$-NaCl계 (Type III) 유체포유물의 경우 온도가 감소함에 따라 염농도 역시 감소하는데, 이는 높은 염농도를 가진 $H_2O$-NaCl계 유체와 낮은 염농도를 가진 $CO_2-H_2O$-NaCl계 유체의 불혼화에 의해 열수의 진화가 이루어졌음을 의미한다. Type I 유체포유물은 온도 감소와 염농도 사이의 뚜렷한 변화가 인지되지 않았다. 따라서, 대화 열수계의 함 몰리브덴-중석 광화작용은 $400^{\circ}C$, 5.2 equiv. wt.% NaCl의 염농도를 가진 광화유체로부터 시작되어, 약 $350^{\circ}C$ 부근에서 유체의 불혼화 용융에 의해 진행되었다. 이후 대화 열수계에 유입된 상대적으로 낮은 온도와 염농도를 갖는 유체 (천수 또는 상대적으로 높은 물/암석 비를 갖는 열수유체) 의 혼입 작용에 의해 후기 천금속 광화작용이 야기되었다.

• Journal of Periodontal and Implant Science
• /
• 제38권4호
• /
• pp.645-656
• /
• 2008

Purpose: To evaulate the effects of chlorhexidine and $H_2O_2$ on matrix metalloproteinase-1 (MMP-1), tissue inhibitor of metalloproteinase(TIMP-1, TIMP-2), Type 1 collagen, fibronectin and UNCL expressions in human periodontal ligament fibroblasts (hPDLF). Materials and Methods: $1.2{\times}10^{-1}%$, $1.2{\times}10^{-2}%$ and $1.2{\times}10^{-3}%$ CHX and $3{\times}10^{-3}%$, $3{\times}10^{-4}%$ and $3{\times}10^{-5}%$ $H_2O_2$ and mixture of CHX and $H_2O_2$ were applied to hPDLF for 1 min and 30 min. The mRNA expressions of MMP-1, TIMP-1 and 2, Type 1 collagen, fibronectin and UNCL in hPDLF were analysed by RT-PCR. Results: The result were as follows: 1. The expression of UNCL mRNA was higher than that of other mRNAs. 2. $1.2{\times}10^{-3}%$ CHX increased mRNA expressions of hPDLF as application time increased. 3. $H_2O_2$ lower than $3{\times}10^{-3}%$ increased expression of UNCL mRNA, and did not decrease mRNA expression of hPDLF. 4. hPDLF treatment with $1.2{\times}10^{-1}%$ CHX (with or without $H_2O_2$) resulted in no gene expression. 5. hPDLF treatment with $1.2{\times}10^{-2}%$ CHX (with or without $H_2O_2$) for 30 minutes resulted in no gene expression. Conclusion: Because low concentration of CHX and $H_2O_2$ increased UNCL mRNA expression of hPDLF, low concentraction of CHX and $H_2O_2$ may have an antioxidative effect.