• Journal of Hydrogen and New Energy
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2015

In this study, characteristics of reforming process of automotive liquefied petroleum gas (LPG) fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2/C$ ratios, reactant flow rate and metal form on the process were investigated. In the test of varying $O_2/C$ ratio from partial oxidation to stoichiometry combustion, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2/C$ ratio for the highest $H_2$ yield was determined to be around 1.0 for 20~50 lpm, and 1.35 for 100 lpm. Specific energy density (SED) was major factor in reforming process and higher SED leads to higher $H_2$ yield. And metal form in the reformer increased $H_2$ yield of about 34 % as compared to the case of no metal form. The result can be a guide to map optimal condition of reforming process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.127-131
• /
• 1998

The effect of extraction temperature ($60\~100^{\circ}C$) and pH ($2.0\~13.5$) on the yield and chemical compositions of crude porphyran from Porphyra Yezoensis was investigated. The yield and chemical compositions of crude porphyran were greatly affected by extraction pH and temperature. Yield was highest between pH $3\~4$ at all temperature ranges. Crude porphyran extracted in acidic conditions showed more sulfate and less protein content than extracted in neutral conditions, but molecular weights was decreased. Crude porphyran extracted in alkaline conditions showed low sulfate and high protein content. For high yield and low molecular weight, acidic condition, particulary pH $3\~4$, was effective. But in order to avoid molecular weight degradation, neutral conditions were effective.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.929-934
• /
• 2000

Optimum stand density of alfalfa (Medicago sativa L.) varies with locations and climates. Stand density is one of the factors that determines herbage yield, forage quality and persistence of alfalfa. As establishment costs increase, the question arises whether present population densities are optimum for obtaining maximum herbage yield and forage quality. The objectives of this study were: 1) to determine the optimum plant density for highest herbage yield and forage quality for the dehydrated alfalfa industry under Edmontons climatic conditions in Alberta, Canada; 2) to compare herbage yield and forage quality of the cultivars 'Algonquin' and 'Vernal' grown at a range of stand densities. Alfalfa seedlings of both cultivars were either transplanted at spacings of 6, 10, 15 and 25 cm or direct seeded at the 4.5 cm plant spacings, providing population densities of 494, 278, 100, 45 and $16plants/m^2$. The experimental design was a randomized complete block with a split-plot arrangement having three replicates; the main plots consisted of two alfalfa cultivars Algonquin and Vernal, and the sub-plots were the five population densities. The cultivar Vernal had significantly higher annual yield than did the cultivar Algonquin. There was no significant effect of plant density on herbage yield. There was no difference in crude protein (CP) between the two cultivars. At the first cut, there was a significant quadratic effect of plant density on CP content and the greatest CP occurred at the 100 plants/m2 density. Crude protein was not affected by plant density at the second cut. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) were not affected by plant density. The cultivar Algonquin usually had a lower ADF and NDF than cultivar Vernal. In conclusion, high population densities ($278plants/m^2$ or more) of alfalfa did not improve herbage yield and forage quality compared with low plant population densities ($100plants/m^2$ or less) of alfalfa.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.3
• /
• pp.129-134
• /
• 1989

This experiment was conducted to evaluate the effect of cutting frequency and nitrogen fertilization on th change of vegetation and the yield of dry matter on the different mixture combination of permanent pasture. 1. DM yield was increased as the increasing Arrhenatherum elntius but was decreased as the increasing Tkisetum fkavescens. 2. DM yield was unaffectdd by the different mixture combination of permanent pasture eventually. 3. In case of cutting frequency, 2-cutting showed higher DM yield than that of 3-cutting, and N-fertilization level showed significant increase in DM yield as the increasing N-level, especially 2-cutting block of N-3 showed the highest yield and 3-cutting block of N-l showed the lowest yield. 4. Mixture combination, N-level and cutting frequency did not show significant changes in DM yield of permanent pasture eventually.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.500-503
• /
• 1989

Synthetic studies have been carried out for the addition or substitution of phosphorus nucleophiles to the cation $[(exo-6-R-{\eta}^ {5_-}2-MeO-C_6H_5)Mn(CO)_2NO]PF_6,$ 2. $PPh_3$ reacts with 2 to yield the CO displaced product and $MePPh_2$ attacks the dienyl ring of 2 to yield the phosphonium adduct or the metal to give the CO displaced depending upon the reaction temperatures. Nucleophilic addition of HPPh2 to the dienyl ring of 2 gives a neutral substituted product. $P(OMe)_3$ reacts with 2 to yield a mixture of ring adduct and CO displaced product at room temperature. $At - 20^{\circ}C,\;P(OMe)_3$ attacks the dienyl ring of 2 to give a posphonium adduct, which underwent Arbuzov reaction. This reaction affords a new route to the phosphonate complexes.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.639-642
• /
• 1999

Optimization of the chitosanoligosaccharide production was studied with chitosanase. The optimum conditions for the enzymic reaction have been determined. Enzyme stability was maintained above 90% after 6 days at pH 5.0. The optimum initial reaction rate was appeared in 1.0% of chitosan solution. The production yield of chitosanoligosaccharides was over at 0.4%~2.0% of chitosan. At 4.0% of chitosan solution, however, the production yield was decreased to 64.6%. To increase the yield, stepwise addition of substrate into the reactor was investigated. In this case, the yield was increased from 64.6% to 83.2% and the final concentrations of chitosanoligosaccharide was 12.26 mg/mL. By TLC analysis, most of the chitosanoligosaccharides produced were 3-5 mers.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1920-1927
• /
• 2015

This study aimed to optimize four factors affecting biomass accumulation and 5-aminolevulinic acid (ALA) yield together with pollutants removal in Rhodobacter sphaeroides wastewater treatment. Results showed that it was feasible to produce biomass and ALA in R. sphaeroides wastewater treatment. Microaerobic, 1,000-3,000 lux, and pH 7.0 were optimal conditions for the highest ALA yield of 4.5 ± 0.5 mg/g-biomass. Under these conditions, COD removal and biomass production rate were 93.3 ± 0.9% and 31.8 ± 0.5 mg/l/h, respectively. In addition, trace elements Fe²⁺, Mg²⁺, Ni²⁺, and Zn²⁺ further improved the ALA yield, COD removal, and biomass production rate. Specifically, the highest ALA yield (12.5 ± 0.6 mg/g-biomass) was achieved with Fe²⁺ addition.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.169-175
• /
• 2005

This study was carried out to investigate the effects of irrigation water pollution on the yield and grain quality of rice. It acquires fundamental data to set up water quality standards for irrigation and produce agricultural safety products. The correlations of BOD, T-N, T-P, pH, ECw of the irrigation water with yield, grain appearance quality, and the protein content were evaluated. The field and pot experiments were conducted by using Japonica of Oryza sativa L. during 2 years. BOD concentration in irrigation water effects strongly on grain appearance quality and yield of rice. T-N in irrigation water has strong effect on the yield, appearance, and quality of rice. T-P concentration in irrigation water have not any correlation with yield and quality of rice. pH showed strongly negative correlation with maturity ratio(MTR), 1000 grain weight(TGW), and yield of rice(YLD) as r=-0.803~-0.828(p<0.001) and have no effect on the appearance quality of rice. $EC_w$ indicating salt content showed strongly negative correlation with MTR, TGW, number of grains per panicles(NGP), and number of panicles per unit area(NPM) as r=-0.759~-0.798, and with YLD as -0.753.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.17-22
• /
• 2015

A total of CNU 28 hybrids were developed at the CNU Corn Breeding Lab. were evaluated to identify new cultivars in botanical characteristics, fresh yield per 10a and taste qualities. Most of these hybrids were stable in environmental stresses such as lodging, disease and insects. Stem height ranged from 115.0 to 239.3 cm, and ear height ranged from 30.7 to 107.0 cm. The ear height to stem height ratio was showed low than 50% of standard as a stable plant type to lodging. The range of ear length was 14.2 cm to 23.0 cm. Especially, CNU 13H-73 was very longest ear as a 23 cm. The fresh yield per 10a was high in purple of CNU13H-79 hybrid than control hybrid Miheuckchal, and CNU13H-73 in white hybrid was similar Yeonnong check hybrid. The 100-kernel weights in CNU13H-3 and CNU13H-9 hybrids were higher than that of the control hybrid. CNU13H-98 among hybrids had a 100-kernel weight of 20.32 g, which was heavier than that of the control hybrid Daehackchal Gold 1. The average pericarp thickness was $41.4{\mu}m$, CNU13H-46 among hybrids had a very thin pericarp as a $35.5{\mu}m$. The mean sugar content of the used hybrids was 14.95 brix%; CNU13H-73 and CNU13H-55 had higher than Mibak2 as a control hybrid.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.176-179
• /
• 1992

New method for preparing cyclopentanediol from bicyclic ketal is described. Bicyclic ketal is cleaved to give 1,5-diketone, which is then reductively coupled intramolecularly to yield 1,2-cyclopentanediol. A solution of bicyclic ketal (1a) in methylene chloride was treated with aluminum chloride(2 eq.)-sodium iodide(l.5 eq.) at ambient temperature for 3 h to give the 1,5-diketone (2a) in 71% yield after basic work-up followed by short path column chromatography. A solution of the 1,5-diketone (2a) in THF was reacted with titanium tetrachloride(6 eq.)-Mg(Hg)(0.3 eq.) at $0^{\circ}C$ for 4 h to give the 1,2-cyclopentanediol (3a) in 75% yield after basic work-up followed by short path column chromatography.