• 제목/요약/키워드: $H_{rms}$

검색결과 220건 처리시간 0.025초

과산화수소 혼합냉각기 내의 노즐배치 및 가스분사 방식 변화에 따른 혼합율 개선에 대한 전산해석적 연구 (CFD Analysis on the Effect of the Nozzle Arrays and Spray Types in the Hydrogen Peroxide Mixing Quencher to Improve the Mixing Efficiency)

  • 구성모;장혁상
    • 청정기술
    • /
    • 제23권1호
    • /
    • pp.42-53
    • /
    • 2017
  • 탈질과 탈황을 동시에 수행하는 과산화수소($H_2O_2$) 수용액 세정탑의 반응효율을 증가시키기 위해 예혼합이 이루어지는 혼합 냉각기(mixing quencher) 영역 내부의 유체유동에 대한 수치해석이 수행되었다. 산업공정에서 상용화되고 있는 세정탑 전단부의 혼합냉각기에서 과산화수소 수용액이 주입되는 노즐의 분사방식은 배기가스와 과산화수소 수용액의 혼합에 중요한 역할을 하며, 혼합냉각기에서의 혼합도는 세정탑 의 효율을 결정하는 중요 요소가 된다. 본 연구에서는 혼합냉각기 내부유체의 농도분포 개선을 목적으로 하여 혼합냉각기 내의 노즐 관의 배열을 조절하거나 노즐 팁 각도를 변경하며 유체혼합을 최적화하였다. 전산해석은 이 냉각기영역의 내부유동 및 각 유체 농도에 대한 RMS (root mean square) 값을 계산하여 내부유체의 혼합도의 개선을 확인하였다. 세부적으로는 노즐 관의 위치를 조절할 때 변경되는 냉각기 영역 후단의 농도 RMS 값을 확인하여 난류형성위치에 따른 최적화된 혼합도를 확인하였으며 기본형상 대비 난류형성방향을 조절하는 목적의 노즐 팁 각도를 증감하여 농도분포의 균질화를 비교하였다. 노즐 관의 배열에 따라 난류형성위치와 그에 따른 유체혼합이 해석되었다. 또한 노즐 팁 각도를 조절하는 경우에는 유동방향과의 각도에 따라, 흐름이 병류와 향류에 따라 혼합도의 최적화를 확인할 수 있었다. 노즐 관의 위치는 0.3 m, 노즐 팁은 병류의 $15^{\circ}$일 때 최적의 조건을 가지며 가장 낮은 RMS 값인 12.4%를 가졌다.

A MULTI-DIMENSIONAL REDUCTION METHOD OF LARGE-SCALE SURVEY DATABASE

  • Lee, Y.;Kim, Y.S.;Kang, H.W.;Jung, J.H.;Lee, C.H.;Yim, I.S.;Kim, B.G.;Kim, H.G.;Kim, K.T.
    • 천문학논총
    • /
    • 제28권1호
    • /
    • pp.7-13
    • /
    • 2013
  • We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the 'background' task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using 'background' task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

금강하구 연안역에서 HF radar로 측정한 유속의 정확도 (Accuracy of HF radar-derived surface current data in the coastal waters off the Keum River estuary)

  • 이상호;문홍배;백혜연;김창수;손영태;권효근;최병주
    • 한국해양학회지:바다
    • /
    • 제13권1호
    • /
    • pp.42-55
    • /
    • 2008
  • 금강하구 연안역에서 HF radar로 측정한 유속의 정확도를 평가하기 위해 HF radar의 마주보는 radial 유속들을 비교하고, HF radar로 측정한 유속을 현장측정 유속과 비교하였다. 비교 자료들에 대한 회귀선과 편차는 주성분 분석(Principal Component Analysis)으로 구하였다. HF radar site를 연결하는 선의 중간지점에서 마주보는 radial vector를 비교하였을 때 RMS 편차는 동계에 4.4 cm/s, 하계에 5.4 cm/s이었다. HF radar와 유속계로 측정한 유속성분을 비교하여 분석된 RMS 편차에서 GDOP(Geometric Dilution of Precision) 효과를 제거하였을 때 HF radar의 합성 속도 측정오차는 GDOP 값이 적절한 정점들에서 5.1 cm/s 이내였다. 서로 다른 두 방법에 의해 구해진 이 결과는 연구해역에서 HF radar로 측정된 유속의 정확도 하한이 5.4 cm/s임을 제시한다. 기존의 연구에서와 같이 RMS 편차는 섬 주변에 있는 관측점에서 크게 되고, 두 radar에서 평균거리가 멀어질수록 신호 대 잡음수준과 radial vector 교차각의 감소로 인해 증가하였다. GDOP 값을 이용한 오차분리 과정에서 속도성분별 GDOP 값이 유사하고 비교 유속의 성분별 RMS 편차도 비슷한 값을 보이는 경우 HF radar 유속의 오차가 불확실한 값으로 도출될 수도 있음이 밝혀졌다. GDOP가 정상적인 radar 관측 범위 내에 있는 정점에서 측정된 유속을 조류와 해류로 분리하였을 때 HF radar 유속에서 구해진 조류타원의 특성은 유속계로 측정된 타원특성과 잘 부합하였고, 해류의 시간적 변화는 바람과 밀도장의 외력에 의한 물리적 과정을 반영하는 반응을 보였다.

파킨슨성 완서증의 손가락 마주치기 속도와 크기에 대한 약물과 뇌심부자극의 효과 (Effects of Medication and Deep Brain Stimulation on the Finger-tapping Speed and Amplitude of Parkinsonian Bradykinesia)

  • 김지원;권유리;박상훈;엄광문;고성범;장지완;이혜미
    • 대한의용생체공학회:의공학회지
    • /
    • 제33권1호
    • /
    • pp.47-52
    • /
    • 2012
  • The purpose of this study is to investigate whether medication and deep brain stimulation (DBS) have differential effects on the speed and amplitude of bradykinesia in patients with Parkinson's disease (PD). Five PD patients with implanted DBS electrodes (age: $60.6{\pm}7.4yrs$, H&Y stage: $3.1{\pm}0.2$) participated in this study. FT (finger tapping) movement was measured using a gyrosensor system in four treatment conditions: Med (Medication)-off/DBS-off, Med-off/DBS-on, Med-on/DBS-off and Med-on/DBS-on. Quantitative measures representing average speed and amplitude of FT movement included root-mean-squared (RMS) angular velocity and RMS angle. One-way repeated measures ANOVA showed that RMS angular velocity of Med-on/DBS-on was significantly greater than those of Med-off/DBS-off and Med-off/DBS-on (p < 0.01) whereas RMS angle was not different among conditions (p = 0.06). Two way repeated measures ANOVA showed that only medication improved RMS angular velocity (p < 0.01), whereas both medication and DBS had no significant effect on RMS angle (p > 0.02). Effect size of RMS angular velocity was greater than that of RMS angle in both medication and DBS. This suggests that medication and DBS have differential effects on FT bradykinesia and velocity and amplitude impairments may be associated with different functional aspects in PD.

H 제어와 μ-합성 제어를 이용한 스프링-질량-감쇠 융합시스템 제어 (The Control of Spring-Mass-Damper Convergence System using H Controller and μ-Synthesis Controller)

  • 정성훈
    • 한국융합학회논문지
    • /
    • 제8권5호
    • /
    • pp.1-11
    • /
    • 2017
  • $H_{\infty}$ 제어와 뮤-합성 제어 방법을 사용하여 두 가지 상황, 즉 불확실성이 포함되지 않았을 때와 20% 불확실성이 포함되었을 때, 하에서 스프링-매스-댐퍼 시스템의 진동을 최소화하였다. 두 컨트롤러의 안정성 및 성능 파악을 위해 GM와 PM 값을 사용하여 분석되었다. 중앙 수치 미분법과 RMS 방법을 사용하여 출력 응답의 신호 강도가 비교되었다. 끝으로, 안정성 비교를 위하여 3가지 다른 $W_{per\;f1}$ 가중함수의 경우에 대해 총 40개의 $H_{\infty}$ 제어기와 뮤-합성 제어기 무작위 표본이 생성되었다. 전반적으로, 40개 플랜트 모델에서 얻어진 결과 값의 견고한 안정성과 성능 값에 따르면, 뮤-합성 제어기가 $H_{\infty}$ 제어기보다 진동 관리에 효과적임이 입증되었다.

배전급 초전도 한류기 개발을 위한 Bi-2212 초전도 한류소자의 사고전류 제한 특성 (Fault current limitation characteristics of the Bi-2212 bulk coil for distribution-class superconducting fault current limiters)

  • 심정욱;김혜림;임성우;현옥배;이해근;박권배;김호민;이방욱;오일성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
    • /
    • pp.639-640
    • /
    • 2006
  • We investigated fault current limitation characteristics of the resistive superconducting fault current limiter(SFCL) which consisted of a Bi-2212 bulk coil and a shunt coil. The Bi-2212 bulk coil and the shunt coil were connected in parallel. The Bi-2212 bulk coil was placed inside the shunt coil to induce field-assisted quench. The fault test was conducted at an input voltage of 200 $V_{rms}$ and fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$. The fault conditions were asymmetric and symmetric, and the fault period was 5 cycles. The test results show that the SFCL successfully limited the fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$ to below $5.5{\sim}6.9kA_{peak}$ within $0.64{\sim}2.17$ msec after the fault occurred. Limitation was faster under symmetric fault test condition due to the larger change rate of current. We concluded that the speed of fault current limitation was determined by the speed of current rise rather than the amplitude of a short circuit current. These results show that the Bi-2212 bulk coil is suitable for distribution-class SFCLs.

  • PDF

비선형 해양파의 통계적 특성에 대한 해석 (An Analysis of Statistical Characteristics of Nonlinear Ocean Waves)

  • 김도영
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제13권2호
    • /
    • pp.112-120
    • /
    • 2010
  • 이 논문에서는 Yura 해역에서 폭풍 중 24시간 연속으로 측정된 freak wave가 포함된 파랑자료를 분석하여 비선형 파도의 통계적 특성을 살펴보았다. 파고의 초과확률분포는 Edgeworth-Rayleigh(ER) 분포와, Rayleigh 분포를 이용하여 계측된 자료와 비교하였다. 파형이 stationary 상태를 유지하는 10시간 동안 계측된 파랑자료(파랑의 개수가 4600 내외)에서는, 파형의 분포는 Gram-Chalier분포가 Gaussian분포보다 파랑자료와 일치를 한다. 전반적인 파고의 확률분포는 Rayleigh($H_{rms}$)분포를 잘 따르는 것을 볼 수 있다. Freak wave 발생확률은 Rayleigh($m_{o}{^{1/2}}$) 분포로 잘 표시가 되며, ER 분포는 과대하게 예측하는 것을 볼 수 있다. 30분간 계측된 파랑자료(파랑 개수가 250개 내외)에서 freak wave가 발생된 경우는 ER 분포가 freak wave 발생확률과 잘 일치한다. 그러나 전반적인 파고의 발생확률이 과대평가된다. Freak wave가 발생하지 않은 경우는 거의 모든 파고에 걸쳐 Rayleigh($H_{rms}$)분포가 계측된 파고분포와 잘 일치를 한다. 파고가 10 m 이하의 freak wave의 파고확률분포는 10 m 이상의 파고를 가지는 freak wave와 비슷한 경향을 보인다. $H_{max}/H_{1/3}$은 파형의 kurtosis와 연관이 있는 것을 보여주었다. Freak wave의 발생은 높은 kurtosis 값과 관계가 있으며, freak wave가 발생하는 임계 kurtosis 값이 존재할 가능성이 있을 것으로 추정된다.

YBCO 박막을 이용한 3상 6.6kV 항형 초전도 한류기의 동시Quench 분석 (Simultaneous Quench Analysis of a Three-Phase 6.6 kV Resistive SFCL Based on YBCO Thin Films)

  • 심정욱;김혜림;현옥배
    • Progress in Superconductivity
    • /
    • 제6권1호
    • /
    • pp.46-51
    • /
    • 2004
  • We fabricated a resistive type superconducting fault current limiter (SFCL) of 3-phase $6.6 kV_{rms}$ / rating, based on YBCO thin films grown on sapphire substrates with a diameter off inch. Each element of the SFCL was designed to have the rated voltage of $600 V_{rms}$ $/35A_{rms}$. The elements produced a single phase with 8${\times}$6 components connected in series and parallel. In addition, a NiCr shunt resistor of 23 $\Omega$ was connected in parallel to each of them for simultaneous quenches between the elements. Prior to investigating the performance of the 3 phase SFCL, we examined the quench characteristics for 8 elements connected in series. For all elements, simultaneous quenches and equal voltage distribution within 10% deviation from the average were obtained. Based on these results, performance of the SFCL for single line-to-ground faults was investigated. The SFCL successfully limited the fault current of $10 kA_{ rms}$ below 816 $A_{peak}$ within 0.12 msec right after the fault occurred. During the quench process, average temperature of all components did not exceed 250 K, and the SFCL was totally safe during the whole operation.

  • PDF

ZnS:Mn/$ZnS:TbF_{3}$ 적층구조의 형광층을 이용한 TFEL소자의 제작 및 그 특성 (Fabrication and characteristics of TFEL device using phosphor layer ZnS:Mn/$ZnS:TbF_{3}$ slatted structure)

  • 박경빈;김호운;배승춘;김영진;조기현;김기완
    • 센서학회지
    • /
    • 제6권1호
    • /
    • pp.63-71
    • /
    • 1997
  • ZnS:Mn/$ZnS:TbF_{3}$적층구조의 TFEL(thin-film eletroluminescent)소자를 제작하였으며, 이때 절연층으로 (Pb,La)$TiO_{3}$(이하PLT)와 $SiO_{2}$박막을 이용하였다. TFEL소자는 $78V_{rms}$의 문턱전압과 $100V_{rms}$의 인가전압에서 $400{\mu}W/cm^{2}$의 휘도를 나타내었다. TFEL소자의 발광스펙트럼은 450nm에서 630nm사이의 파장대를 보이고 있다. 제작된 TFEL소자는 컬러필터를 병용함으로서, 적 녹 청의 색상을 구현하는 TFEL소자로 활용할 수 있다.

  • PDF