• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.220-228
• /
• 2018

This study introduced a carbon-free electrode for $Li-O_2$ cells with the aim of suppressing the side reactions activated by carbon material. Micro-particles of poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, were used as the base material for the air electrode of $Li-O_2$cells. The PEDOT micro-particles were treated with $H_2SO_4$ to improve their electronic conductivity, and LiBr and CsBr were used as the redox mediators to facilitate the dissociation of there action products in the electrode and reduce the over-potential of the $Li-O_2$ cells. The capacity of the electrode employing PEDOT micro-particles was significantly enhanced via $H_2SO_4$ treatment, which is attributed to the increased electronic conductivity. The considerable capacity enhancement and relatively low over-potential of the electrode employing $H_2SO_4$-treated PEDOT micro-particles indicate that the treated PEDOT micro-particles can act as reaction sites and provide storage space for the reaction products. The cyclic performance of the electrode employing $H_2SO_4$-treated PEDOT micro-particles was superior to that of a carbon electrode. The results of the Fourier-transform infrared spectroscopic analysis showed that the accumulation of residual reaction products during cycling was significantly reduced by introducing the carbon-free electrode based on $H_2SO_4$-treated PEDOT micro-particles, compared with that of the carbon electrode. The cycle life was improved owing to the effect of the redox mediators. The refore, the use of the carbon -free electrode combined with redox mediators could realize excellent cyclic performance and low over-potential simultaneously.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.81-88
• /
• 2004

In this study, heat and mass transfer characteristics of five components solution (LiBr＋Lil＋LiNO$_3$＋LiCl＋$H_2O$) which could be substituted for commonly used LiBr solution are tested using a helical absorber. The arrangement of helical-typed heat exchangers allows to make the system more compact as compared to conventional one. The effects of experimental parameters, such as the solution flow rate, cooling water, solution temperature, solution concentration and surfactant have been investigated in view of the heat and mass transfer. The results of the experiment of heat and mass transfer performance show that five components solution should have 2％ higher concentration fur equal absorption capacity of LiBr solution. But considering that five components solution have higher solubility than LiBr solution about 4％ high concentration, five components solution could be applied to a small sized water cooled or air cooled absorption chiller/heater. The increase of heat and mass transfer coefficient by surfactant addition is about 25∼30％ and 23∼40％ respectively.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1214-1222
• /
• 2001

The present study investigated the effect of diameter and length on the absorption performance of a vertical falling film type absorber using $LiBr-H_2$O solution of 60 wt%. The parameters were diameter of absorber (17.2, 23.4, 31.1 mm), length of absorber (771, 1150, 1528 mm), and film Reynolds numbers (50, 70, 90, 110, 130, 150). As the diameter of the absorber was increased, the absorption mass flux, Sherwood number, heat flux, and heat transfer coefficient were increased, in which Sherwood number and heat transfer coefficient were increased up to 13% and 30% respectively. As the length of the absorber was increased, the total absorption rate and heat transfer coefficient were increased by 37% and 35% respectively, while the absorption mass flux was decreased.

• 설비공학논문집
• /
• 제14권8호
• /
• pp.641-647
• /
• 2002

Objectives of this paper are to investigate the effect of roughness of micro-hatching tubes on the absorption performance and to develop on experimental correlation of Nusselt as a function of the roughness. Three different micro-scale hatched tubes and a bare tube were tested in the present experiment. $H_{2}O/LiBr$ solution is used as working fluid. It was found that absorption performance of micro-scale hatched tubes were improved upto 2 times with an error band of ${\pm}25%$ compared with the bare tube. An experimental correlation of Nusselt was developed as a function of the roughness.

• 한국태양에너지학회 논문집
• /
• 제28권4호
• /
• pp.43-49
• /
• 2008

The purpose of this study is to present the simulation results and an overview of the performance assessment of a solar heating & cooling system by means of the $200m^2$ evacuated tube solar collector. The simulation was carried out using the thermal simulation code TRNSYS with new model of a single-effect LiBr/$H_{2}O$ absorption chiller developed by this study. The calculation was performed for yearly long-term thermal performance and for two design factors: the solar hot water storage tank and the cold water storage tank. As a result, it was anticipated that the yearly mean system efficiency is 46.7% and the solar fraction for the heating, cooling and hot water supply are about 84.4 %, 41.7% and 72.4%, respectively.

• 한국자기학회지
• /
• 제9권5호
• /
• pp.234-238
• /
• 1999

각종 microwave용 통신기기 소자 및 고주파용 memory 소자로 사용하기 위해서 각형비가 크고 보자력이 작은 lithium ferrite를 개발하고 물리적인 특성을 조사하기 위하여 Li0.48-0.5xBi0.02Ni0.04ZnxFe2.46-0.5xO4의 조성식을 갖는 시편을 제조하였다. ZnO을 첨가하여 변화시킴에 따라 잔류자기(Bm)가 증가하고 보자력(Hc)이 낮아졌으나 각형비 R은 감소하였다. 105$0^{\circ}C$에서 소결한 시편의 경우 R=0.82, Hc=1.8Oe로 나타났고 110$0^{\circ}C$에서 소결한 시편의 경우 R=0.75 및 Hc=1.70Oe인 값을 얻었다. Tc는 463$^{\circ}C$로 측정되었고 주변온도 변화에 대한 Br값의 변화가 매우 안정된 0.09~0.11 값으로 나타났다.

• 설비공학논문집
• /
• 제14권10호
• /
• pp.825-832
• /
• 2002

The present study investigated the enhancement of the absorption performance by the spring wrapped around the outer surface of the vertical falling film absorber tube. Heat and mass transfer enhancements were experimentally investigated, and flow visualization was performed to observe the wettability and flow pattern of the solution. The key experimental parameters were spring diameter (0.5, 1.0 mm) and spring pitch (1, 3, 10 mm), film Reynolds number (50~150), and concentration of LiBr-$H_2O$ solution (55, 60, 65 wt%). As the spring diameter was increased, the absorption mass flux, Sherwood number, Nusselt number, heat flux, and heat transfer coefficient were increased The Nusselt and Sherwood numbers showed the maximum at the spring pitch of 3mm, and the ratio of pitch to diameter of approximately 3 and 6 for the spring diamter of 0.5 mm, respectively.

• 공업화학
• /
• 제16권1호
• /
• pp.123-130
• /
• 2005

산소 PSA용 흡착제의 제조를 위하여 표면적이 큰 제올라이트 X형 흡착제를 합성하고 양이온교환을 통하여 질소의 선택적 흡착 능력이 우수한 흡착제로 제조하였다. 제올라이트 X형 흡착제는 50 L급 대형 반응기에서 $SiO_2\;:\;Na_2O\;:\;H_2O\;:\;Al_2O_3$ = 2.5 : 3.5 : 150 : 1의 조성으로 $98^{\circ}C$, 18 h 동안 반응한 결과 표면적이 $650m^2/g$ 이상의 표면적을 나타내었다. 흡착제의 양이온교환은 Li, Ag, Ca, Br, Sr 등의 금속 이온을 대상으로 조사하였다. Ag 이온의 이온교환 속도가 가장 빠르게 일어났으며 모든 금속 이온이 제올라이트 X형에 포함된 Na 이온과 거의 당량적으로 이온 교환이 일어남을 알 수 있었다. 양이온 교환된 제올라이트 X형 흡착제의 질소와 산소의 흡착 성능을 $10{\sim}40^{\circ}C$, 0~9 atm의 범위에서 측정한 결과 이온교환을 하지 않은 NaX 흡착제에 비하여 월등히 높은 흡착 성능을 나타내었으며 이온 교환된 제올라이트 X형 흡착제의 질소 흡착량은 0.5 atm 이하의 저압에서는 Ag > Li > Ca > Sr > Ba > K 이온의 순으로 나타났으나 1 atm 이상의 고압에서는 Li > Ag > Ca > Sr > Ba > K 이온의 순으로 나타났다. 공기의 조성에 준하는 질소 및 산소의 분압에서 흡착량의 비를 조사하여 질소/산소 분리도를 측정한 결과 $20^{\circ}C$의 온도에서 Li으로 이온 교환된 흡착제의 분리도는 13.023을 나타내었다.

• 설비공학논문집
• /
• 제29권1호
• /
• pp.7-14
• /
• 2017

This study carried out a numerical analysis of the effects of hot waste water supply on the performance of a Type II absorption heat pump. There are two types of hot waste water supply, regular series flow and reverse series flow. Also it investigated the interaction between each type of flow and heat exchange solutions. As the effectiveness of heat exchange solutions increase, the steam generation and (COP) increase as well. If the effectiveness of a heat exchange solution is lower than 0.566, the steam generation rate of the reverse flow is lower than that of the regular series flow. A high effectiveness of heat exchange solution is therefore required to make a larger amount of steam in reverse series flow than with ordinary series flow. The COP difference between the two types of flow decreases with the increasing effectiveness of the heat exchange solution. Thus, a reverse flow type absorption heat pump can match the high steam generation rate and COP of the ordinary flow type when a highly effective heat exchange solution is applied.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.679-682
• /
• 2002

Layered Na0.7[Ni0.05Mn0.95]O2 compounds have been synthesized by a sol-gel method, using glycolic acid as a chelating agent. Na0.7[Ni0.05Mn0.95]O2 precursors w ere used to prepare layered lithium manganese oxides by ion exchange for Na by Li, using LiBr in hexanol. Powder X-ray diffraction shows the layered Na0.7[Ni0.05Mn0.95]O2 has an O3 type structure, which exhibits a large reversible capacity of approximately 190 mA h g-1 in the 2.4-4.5 V range. Na0.7[Ni0.05Mn0.95]O2 powders undergo transformation to spinel during cycling.