• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.429-434
• /
• 2012

With increase in operating temperature of gas turbine for higher efficiency, it is necessary to find new materials of TBC for replacement of YSZ. Among candidate materials for future TBCs, zirconate-based oxides with pyrochlore and fluorite are prevailing ones. In this study, phase structure and thermal conductivities of $(La_{1-x}Gd_x)_2Zr_2O_7$ oxide system are investigated. $(La_{1-x}Gd_x)_2Zr_2O_7$ system are comprised by selecting $La^{3+}/Gd^{3+}$ as A-site ions and $Zr^{4+}$ as B-site ion in $A_2B_2O_7$ pyrochlore structures. With powder mixture from each oxide, $(La_{1-x}Gd_x)_2Zr_2O_7$ oxides are fabricated via solid-state reaction at $1600^{\circ}C$. Either pyrochlore or fluorite or mixture of both appears after heat treatment. For the developed phases along $(La_{1-x}Gd_x)_2Zr_2O_7$ compositions, thermal conductivities are examined, with which the potential of $(La_{1-x}Gd_x)_2Zr_2O_7$ compositions for TBC application is also discussed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권2호
• /
• pp.19-22
• /
• 2022

We studied the effect of substrate-induced strain state on the superconducting transition in GdBa₂Cu₃O_7-x(GdBCO)/La_0.7Sr_0.3MnO₃ (LSMO) bilayers deposited on a LaAlO₃ (LAO) substrate. The stain state of LSMO is controlled by increasing the thickness from 20 nm to 80 nm. Analyses on the extended X-ray absorption fine structure (EXAFS) measurements reveal difference in the direction of MnO₆ octahedral distortion depending on the LSMO thickness, which leads to a difference in anisotropy of magnetization of LSMO layer. The superconducting transitions of our system are strongly correlated with the magnetic anisotropy accompanied by the MnO₆ octahedron distortion in a specific direction. This result suggests the possibility of improving the superconducting transition in the GdBCO/LSMO bilayer system by controlling the degree of competition between superconductivity and ferromagnetism via adjusting strain state in the LSMO layer.

• 대한화학회지
• /
• 제37권1호
• /
• pp.55-61
• /
• 1993

CO 산화반응의 촉매로 사용되는 페로브스카이트 금속산화물인 $Gd_{1-x}Sr_xCoO_{3-y}$ (x = 0.00, 0.25, 0.50, 0.75) 계의 촉매효과를 조사하기 위하여 광음향 분광법을 사용하였다. 산화반응으로부터 생성된 $CO_2$의 광음향신호를 $Gd_{1-x}Sr_xCoO_{3-y}$에서 각각의 x값에 대하여 반응시간, 반응기체인 CO와 $O_2$의 농도비, 그리고 온도에 따라 측정함으로써 CO 산화반응의 $Gd_{1-x}Sr_xCoO_{3-y}$ 촉매 특성에 대한 정보를 얻었다. Gd1-xSrxCoO3-y에서 Gd가 Sr로 치환됨에 따른 촉매효과는 x=0.25일 때 최대로 나타났으며 반응 온도에 대하여는 200$^{\circ}C$ 이상에서 급격히 증가하는 것을 알 수 있었다. $CO_2$ 레이저 광음향분광법은 반응에 대한 연속적인 측정을 가능케 함으로써 CO 산화반응의 촉매효과 연구뿐만 아니라 일반적인 반응속도 연구에도 응용할 수 있는 방법임이 확인되었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.675-678
• /
• 2009

$Fe_2O_3,\;Ag_2O,\;CaWO_4$ and $Gd_2O_2S$:Tb loaded on titanium dioxide photocatalysts (P25, Degussa) were prepared by a calcination. Their composite films containing water-born polyurethane used as a material for immobilization were obtained by spray coating technique. The photocatalytic activity of the titanium dioxide films was characterized by decrease of UV-vis absorption spectra for methylene blue and gas chromatography for photocatalytic decomposition of formaldehyde diluted in water. It was shown that the $Gd_2O_2S$:Tb modified titanium dioxide films had good photocatalytic properties and followed the first-order kinetic model with regard to photocatalytic decoloration of methylene blue. Especially in formaldehyde photodegradation experiment, decrease rate of concentration of the titanium dioxide films with $Gd_2O_2S$:Tb modifying was about 35% larger than that of the unloaded titanium dioxide film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.253-256
• /
• 2002

$Gd_2O_3$:Eu phosphor particles were prepared by largescale ultrasonic spray pyrolysis process. The morphological control of $Gd_2O_3$:Eu particles in spray pyrolysis was performed by adding polymeric precursors into spray solution containing nitrate salts. The effect of composition and amount of polymeric precursors on the morphology, crystallinity, and photoluminescence characteristics of $Gd_2O_3$:Eu particles was investigated. The influence of chain length of PEG on the morphology and photoluminescence intensity was investigated. $Gd_2O_3$:Eu particles prepared from aqueous solution containing no polymeric precursors had a hollow structure and rough surfaces after annealing process. The phosphor particles prepared from solution containing 0.1M CA and 0.lM PEG with high molecular weight as 1,500 had a spherical and filled morphology and the highest photoluminescence intensity, which was 48% higher than that of the $Y_2O_3$:Eu commercial product.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.183-188
• /
• 2010

$Ce_{0.8}Gd_{0.2}O_{1.9}$(GDC20) powder was synthesized by milling of $CeO_2$ slurry and Gd oxalate precipitation. The mixture of $CeO_2$ powder and Gd precipitates calcined at $600^{\circ}C$ for 2 h showed the particle size distribution similar to that of $CeO_2$ powder, which had been milled during the synthesis process. Attrition milling of the calcined powder with an average particle size of $0.36\;{\mu}m$ for 2 h resulted in a decrease in the particle size to $0.24\;{\mu}m$. Although the milled powder consisted of small particles(<$1\;{\mu}m$), a small amount of fine platy $Gd_2O_3$ particles, which had been survived in the milling process, was observed. Sintering of the powder compacts for 4 h showed relative densities of 80.7% at $1300^{\circ}C$ and 97% at $1400^{\circ}C$, respectively. Densification was found to almost complete at $1500^{\circ}C$, resulting in a dense and homogeneous microstructure with a relative density of 99.5%.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.224.1-224.1
• /
• 2003

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.340.1-340.1
• /
• 2003

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4642-4646
• /
• 2023

The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor were fabricated by funace at 1500 ℃ for 12 h using a solid state reaction. The XRD (X-ray diffraction_Panalytical X'Pert Pro) and FE-SEM (field emission scanning electron microscope) are measured to confirm the crystalline structure and surface morphology of the phosphor. The Tb³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 470~650 nm wavelength range due to transitions from ⁵D₄ to ⁷F_j. Therefore, it shows the green region in the CIE chromaticity diagram under both UV and X-rays excitations. The Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 550~750 nm wavelength range because of ⁵D_i to ⁷F_j. The emission is confirmed to be in the red region using the CIE chromaticity diagram. The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor shows the characteristic f-f transition with a long decay time, which is about several milliseconds. They have the high efficiency of light emission for X-ray because of their high effective Z number (Z_eff = 58.5) and density. Therefore, they are very much promising phosphors for X-ray imaging application in medical fields.

• 한국방사선학회논문지
• /
• 제11권1호
• /
• pp.27-35
• /
• 2017

본 연구의 목적은 DR (digital radiography) 장비에서 팬텀을 이용하여 간접변환방식의 CsI:Tl 검출기와 $Gd_2O_2S$ 검출기를 중심으로 두께가 두꺼운 흉부 팬텀과 중간 두께의 대퇴부 팬텀, 그리고 피사체의 두께가 얇은 손 팬텀의 영상을 획득하고 SNR과 CNR을 분석하여 검출기의 특성을 알아보고자 하였다. 피사체 두께 변화에 따른 SNR과 CNR을 측정한 결과 중간 두께의 대퇴부 팬텀과 두께가 얇은 손 팬텀을 촬영 하였을 때 SNR과 CNR은 $Gd_2O_2S$ 검출기보다 CsI:Tl 검출기에서 높게 나타났음을 확인 할 수 있었다. 그러나 두께가 두꺼운 흉부 팬텀을 사용하였을 때는 $Gd_2O_2S$ 검출기의 SNR이 80~125 kVp 일 때와 CNR이 80~110 kVp 일 때 CsI:Tl 검출기 보다 값이 높게 나타났고, 저관전압에서 고관전압으로 갈수록 SNR과 CNR은 모두 증가하였다. 중간 두께의 대퇴부 팬텀에서 CsI:Tl 검출기의 SNR과 CNR은 40~50 kVp 일 때 증가하다 고관전압으로 갈수록 감소하는 것을 확인 할 수 있었고, $Gd_2O_2S$ 검출기의 SNR과 CNR은 40~60 kVp 일 때 증가하다 고관전압으로 갈수록 감소하는 것을 확인 할 수 있었다. 두께가 얇은 손 팬텀에서 CsI:Tl 검출기의 SNR과 CNR은 저관전압에서 감소하다가 고관전압으로 갈수록 증가하면서 100~110 kVp에서는 감소하였고, $Gd_2O_2S$ 검출기의 SNR과 CNR은 고관전압으로 갈수록 감소하는 것을 확인하였다. MTF는 0.5~3 lp/mm에서 CsI:Tl 검출기가 $Gd_2O_2S$ 검출기보다 6.02~90.90%로 높음 보여주고 있고, DQE는 0.5~3 lp/mm에서 CsI:Tl 검출기가 $Gd_2O_2S$ 검출기보다 66.67~233.33% 높음 보여주고 있다. 결론적으로 MTF와 DQE의 비교에서는 CsI:Tl 검출기가 $Gd_2O_2S$ 검출기보다 높게 나타났지만, 두꺼운 흉부팬텀에서 일정 관전압 구간에서는 저가의 $Gd_2O_2S$ 검출기가 고가의 CsI:Tl 검출기보다 SNR과 CNR이 높다는 것을 확인하였다. 흉부 X선 검사 시 CsI:Tl 검출기보다 $Gd_2O_2S$ 검출기를 사용하여 우수한 화질의 흉부영상을 구현함으로써 검사에 유용할 것으로 판단되어지며, 사용자 입장에서 검출기 형태를 결정 할 때 가격대비 성능을 고려 해볼 사항으로 판단된다.