• Bulletin of the Korean Mathematical Society
• /
• v.50 no.3
• /
• pp.839-865
• /
• 2013

We deal with the existence of positive radial solutions concentrating on spheres for the following class of elliptic system $$\large(S) \hfill{400} \{\array{-{\varepsilon}^2{\Delta}u+V_1(x)u=K(x)Q_u(u,v)\;in\;\mathbb{R}^N,\\-{\varepsilon}^2{\Delta}v+V_2(x)v=K(x)Q_v(u,v)\;in\;\mathbb{R}^N,\\u,v{\in}W^{1,2}(\mathbb{R}^N),\;u,v&gt;0\;in\;\mathbb{R}^N,}$$ where ${\varepsilon}$ is a small positive parameter; $V_1$, $V_2{\in}C^0(\mathbb{R}^N,[0,{\infty}))$ and $K{\in}C^0(\mathbb{R}^N,[0,{\infty}))$ are radially symmetric potentials; Q is a $(p+1)$-homogeneous function and p is subcritical, that is, 1 < $p$ < $2^*-1$, where $2^*=2N/(N-2)$ is the critical Sobolev exponent for $N{\geq}3$.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.2
• /
• pp.142-144
• /
• 1996

To clone the gene coding for steroid $\Delta^1$-dehydrogenase of Arthrobacter simplex, its genomic library was constructed with a , $\lambda$gt11 expression vector and immunoscreened with antiserum against the enzyme. One positive clone was found to carry a 1.6-kb EcoR I restriction endonuclease fragment of A. simplex DNA. The restriction map of the 1.6-kb EcoR I fragment was determined after cloning of the DNA into pBS vector.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.367-371
• /
• 2006

Thermal properties of copolyetherester/silica nanocomposites were examined by using DSC and TGA. The segmented block copolyetheresters with various hard segment structures and hard segment contents (HSC) were synthesized and their silica nanocomposite films were prepared by solution casting method. The nano-sized fumed silica particles were found to act as a nucleating agent of the copolyetheresters. The nanocomposites always showed reduced degree of supercooling or faster crystallization than the corresponding copolyetheresters. The nanocomposites also showed increased hard segment crystallinity except HSC 35 sample which had short hard segment length. In case of 2GT [poly(ethylene terephthalate)] copolyetheresters, which were not developed commercially because of their low crystallization rate, the hard segment crystallinity increased considerably. The copolyetherester/silica nanocomposites showed better thermal stability than copolyetheresters.

• Journal of Environmental Science International
• /
• v.20 no.5
• /
• pp.639-645
• /
• 2011

This study found that flotation efficiencies for removing algae and micro particles in raw water were optimized on mixing intensity and time of the mixing and flocculation conditions with a continuous DAF system. It is more efficient for mixing intensity at 23.1 $s^{-1}$ and time at 660 s(Gt value : 15246) to float flocculated floc with the raw water in M water treatment plant. Flotation efficiency was more than about 0.9 when operated pressure and A/S ratio were sustained at 5 $kg_f{\cdot}cm^{-2}$ and up to 0.056 $mL{\cdot}mg^{-1}$. The continuous DAF system made by the study could be continuously operated for 20 days and sustained not exceeding 4 NTU with raw water with low turbidity(13.4~9.8 NTU).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.134-138
• /
• 2000

Most parts of alfalfa plant have been reported to contain autotoxic substances that inhibit seed germination and early seedling growth, however, the chemical(s) is not still studied much. Effect of seed leachates of 'Vernal' alfalfa (Medicago sativa L.) was evaluated for inhibition of alfalfa germination and root growth through bioassay. Alfalfa seeds were extracted in 1 L deionized water for 1 h after soaking and the leachates caused to reduce root length of alfalfa significantly as the soaking time increased. Crude seeds at 4 g L$L^{-1}$ exudated autotoxins that reduce significantly root length by 34 % compared to the control, when the seeds soaked in deionized water for 24 h. However, the extracts did not affect final germination as well as speed of germination. Extracts from ground seeds significantly reduced speed of germination (GT 50) and root length. The results indicate that release of autotoxic substances from seeds during seed imbibition was increased with increase of soaking time and seed amount, and that autotoxicity was more occurred in ground seeds than in crude seeds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.239-242
• /
• 2008

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. In this context, the Micro Gas Turbines (MGT) by using Bio-gas is being considered as a promising solution. In order to propose a feasible concept of those technologies such as improving environmental effect and economics, we performed a sensitivity study for a biomass fueled MGT using a simulation model. The study consists of 1) the fundamental modeling using manufacturer's technical specifications, 2) the correction with the experimental data, and 3) the prediction of off-design characteristics. The performance analysis model was developed by PEPSE-GT 72, commercial steam/gas turbine simulation technicque.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.8
• /
• pp.600-605
• /
• 2014

Two mufflers for a large-size sedan are suggested aiming (1) sporty-sound and (2) quiet-sound as well as both satisfying low back-pressure and low manufacturing cost. Transmission loss prediction considering heat and flow may increase the accuracy and reduce the development cost in muffler design; thus, GT-power prediction considering heat, flow, and acoustics is utilized. By understanding the fundamentals of flow-acoustic theory in small orifice(hole), an effective muffler design concept is proposed. Vehicle tests show the consistence with predictions for sound; also a back-pressure test bench confirms the advantage in pressure drop for both suggested mufflers. Those suggested mufflers also have advantages in manufacturing cost due to simplicity of the design.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.163-169
• /
• 2003

In order to develop a film-forming transdermal drug delivery system, polyurethane (PU) based on poly(ethylene glycol) and poly(tetramethylene oxide) was synthesized and characterized. The synthesized PU was blended with Gantrez ES 225 (GT) to improve the adhesion property of film-forming agent to the skin. When film-forming gel formulation containing 3% ketoprofen (KP) was applied, transparent thin film was obtained within 5 minutes and adhered to the skin for 8 hours. In vitro percutaneous absortion studies were performed to determine the rate of ketoprofen absorption through guinea pig skin. A prominent effect of limonene on the skin permeability of ketoprofen was observed among the various skin permeation enhancers investigated. Considering mechanica properties of film and skin permeability of ketoprofen, 2% of limonene was optimal content in the film forming transdermal formulation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.137-137
• /
• 1991

This paper compares and evaluates the performances of the two types of mathematical programming models for solving the machine-part cell formation problem in group technology manufacturing : indirect formulation relying on surrogate measure such as similarity coefficient and direct formulation seeking to minimize the number of exceptional elements. New indirect formulation, called the generalized p-median model. is proposed. Unlike existing p-median formulations, proposed formulation includes the classical cell formation problem in which only one process plan exsits for each part as a special case. The proposed new formulation can also deal with the cell formation problem in which alternative process plans exist for a part. The indirect formulation is compared with a new direct formulation which needs much fewer extra variables and constraints than existing direct formulations. Some significant findings from comparative experiment are discussed.

• Korean Management Science Review
• /
• v.7 no.2
• /
• pp.43-50
• /
• 1990

생산계획이 수립되어 있는 상태에서 각 공정에 대한 구체적인 일정계획을 수립하였다. Group Technology를 이용하여 부품그룹을 형성하고, 흐름 생산형태의 GT라인으로 가공공정을 배치한 상태에서, Group Scheduling 기법을 활용하였다. 가공순서 결정 규칙으로 Petrov의 방법을 이용하였으며, 부품의 생산량을 고려하여 그룹간 가공순서와 그룹내 각 부품의 가공순서를 결정하였다. 이 과정을 전산화하여 실제로 이용할 수 있도록 하였다. 또한, Gantt Chart를 작성하여 각 공정의 부품별 가공 시작시간과 가공 완료시간을 계산하여, 작업지시는 물론 공정관리에 효과적으로 활용할 수 있도록 하였다. 컴퓨터 프로그램은 쉽게 실용적으로 활용할 수 있도록 하는데 중점을 두었다. 준비시간 및 가공시간에 대한 데이타는 업체에서 이미 사용하고 있는 생산정보 파일을 그대로 이용하거나, 그렇지 않는 경우 여러 용도에 맞도록 이 데이타를 파일로 작성하면 프로그램을 더욱 효율적으로 사용할 수 있으리라 기대된다.