• 한국토양비료학회지
• /
• 제49권4호
• /
• pp.327-334
• /
• 2016

In order to compare phosphorus (P) behavior of livestock manure compost (LMC) and chemical fertilizer (CF) applied to the sea-reclaimed land soils, incubation experiments were conducted for five weeks. Four soils differing textural classes, sandy loam and clay loam, and electric conductivity (EC) value, high and low, were applied with CF and LMC. LMC was applied at the level of 0, 1, 2, and 3% on the soil weight basis and CF was applied at the same levels of P as LMC. The results showed that increase of P application rate of CF and LMC led to linearly increase available $P_2O_5$ and $0.01M\;CaCl_2$ extractable P contents regardless of soil texture and EC. However, 0.01M $CaCl_2$ extractable P from soil applied with CF was significantly higher than with LMC. Correlation analysis between $0.01M-CaCl_2$ extractable P and fractionated P by different extraction methods showed that $0.01M-CaCl_2$ extractable P positively correlated with KCl-P (soluble and exchangeable P) and HCl-P (Ca and Mg bound P). However, NaOH-P (Fe and Al bound P and organic P) and residual P was adverse. The amount of NaOH-P significantly influenced to the amount of 0.01M $CaCl_2$ extractable P of CF and LMC in the soils. The application of LMC at sandy loam soil could be carried out in the consideration of nutrient leaching and crop uptake.

• 복식문화연구
• /
• 제13권3호
• /
• pp.380-390
• /
• 2005

The effect of high purity chitosan was studied on its application to the natural dyeing using Rhusjara ica. In the dyeing experiment, examinations were introduced on the difference between the chitosan treated fabrics and chitosan untreated fabrics, and on the difference according to the type of mordanting agents and the mordanting methods. Dyeing was carried out for the chitosan treated and untreated fabrics under the conditions of non-mordanting and Al, Sn, Fe mordanting. As a result, we found that, in the case of cotton, chitosan untreated fabrics were not dyed enough, and the dyeing effect was not developed even though the mordanting was introduced. However, the chitosan treated fabrics developed excellent dyeing result even in the non-mordanting case. Through the results of cotton fabric dyeing, it was presumed that the dyeing affinity of the chitosan toward the Rhusjara ica, which prefer specific dyestuff (mainly black color), is selectively high. In the case of nylon, the dyeing effect is not developed easily under all conditions regardless of the chitosan treatment or the mordant treatment. It was inferred that a certain portion of the Rhusjara ica dyestuff made direct bonding with the functional elements in the nylon molecules without the help of the mordant. Through the results of nylon fabrics, it was presumed that some functional elements of the nylon molecules had selective affinity toward the specific colorant (mainly yellow color) of the Rhusjara ica.

• Journal of Ecology and Environment
• /
• 제38권3호
• /
• pp.319-326
• /
• 2015

This study investigates the behavioral characteristics and forms of phosphorus in the sediment according to the oxygen condition (aerobic/anaerobic). In the behavioral characteristics analysis, Al-P and Fe-P concentrations were the highest among the forms of inorganic phosphorus, and therefore had the strongest impact on sorption and release corresponding to environmental condition changes. In the experimental investigation of the inorganic forms of phosphorus in the sediment according to the oxygen condition, we determined that the forms of inorganic phosphorus did not greatly affect the sorption or release reaction because the distribution ratios of the inorganic forms remained constant corresponding to changes of dissolved oxygen (DO) conditions. In contrast, the forms of organic phosphorus in the sediments affected both sorption and release. Furthermore, labile-P and moderately labile-P forms were the major mechanisms of sorption in sediment. Moderately labile-P was the greatest contributor to phosphorus release action in sediment. As environmental changes are important for the behavioral characteristics of phosphorus in sediment, the forms of phosphorus should be considered to have a greater effect, especially in the organic phosphorus case. Therefore, based on the present study results, sediment evaluation aimed at controlling internal pollutants in reservoirs should include an examination of the forms of phosphorus present, as well as the release characteristics of environmental changes, which are influential factors of phosphorus control. Further research in this field is required.

• 한국광물학회:학술대회논문집
• /
• 한국암석학회.한국광물학회 2000년도 공동학술발표회 논문집
• /
• pp.19-19
• /
• 2000

;Ultramafic xenoliths found in alkali basalts from Jeju-do, Korea are mostly spinel Iherzolites composed of olivine, orthopyroxene, clinopyroxene and spinel. A subordinate amount of spinel harzburgites and pyroxenites are also found. Temperatures for these xenoliths were estimated from the compositions of coexisting pyroxenes (Wood '||'&'||' Banno 1973; Wells 1977; Bertrand '||'&'||' Mercier 1985; Brey '||'&'||' Kohler 1990), the AI-solubility in orthopyroxene coexisting with olivine and spinel (Sachtleben '||'&'||' Seck 1981; Webb '||'&'||' Wood 1986), and from Fe/Mg partitioning between olivine and spinel (Ballhaus et al. 1991). Temperature estimates from the thermometers by Wells (1977) and Brey and Kohler (1990) are compatible. Average equilibrium temperatures by these two methods for spinel peridotites range from 890 to 1030$^{\circ}$C. Pressures for spinel peridotites were estimated from the geobarometer by Kohler and Brey (1991) derived from the equilibrium Ca content of olivine coexisting with clinopyroxene, and fall within the range of 12.9 to 26.3 kbar. The combination of the thermometer by Brey and Kohler (1990) and the geobarometer by Kohler and Brey (1991) yields P- T estimates for Jeju-do spinel peridotites that fall in experimentally determined spinel lherzolite field in CFMASCr system (O'Neill 1981). These P-T data sets have been used to construct the Quaternary Jeju-do geotherm, which is significantly different from the conventional conductive geotherm. The xenolith-derived geotherm has a higher T gradient at low P (13 kbar) than at high P, which may be due to perturbation of the conductive heat flow by magma underplating or overplating at the crust-mantle boundary. Temperature estimates and statistics on the xenoliths indicate that the crust/mantle boundary in Jeju-do lies at about 11 kbar (~39 km). Spinellherzolite is inferred as a main constituent rock of the uppermost lithospheric mantle beneath Jeju-do. Pyroxenites were intercalated in peridotites in similar depth and temperature as re-equilibrated veins or lens.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.152-152
• /
• 2017

Titanium and its alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element,such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}$-stabilizer and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Therefore, in this study, Si and Mg coatings on the hydroxyapatite film formed Ti-29Nb-xHf alloys by plasma electrolyte oxidation has been investigated using several experimental techniques. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. The electrolyte was Si and Mg ions containing calcium acetate monohydrate + calcium glycerophosphate at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• 자원환경지질
• /
• 제12권2호
• /
• pp.79-93
• /
• 1979

한반도 내에 부존되고 있는 중적광상들은 세 주요한 Metallousenetic Epoch (Pre-Cambrian E., Jurassic-early Cretaceous E., 및 late Cretaceous-early Tertiary E.)에 생성되었고 성인으로 열수작용과 접촉교대작용에 기인된다고 보고되었다. 이중 12개 광상(달성, 산내, 일광, 상동, 대화, 월악, 복수, 옥방, 쌍전, 홍성, 삼봉, 청양)을 본 연구의 대상으로 택하고 각 지역에서 채취한 표품중 모두 25개 시료에 대하여 지화학적 실험을 수행하였다. 즉 각 분쇄된 시료 (-80+120mesh)는 super panner, 중액, isodynamic separator, UV lamp를 이용한 물리적인 처리과정을 거쳐 최종으로 입체현미경 하에서 단체분리된 후 Jarrell-Ash 1.5m Grating Spectrometer를 이용하여 본 연구대상 시료로 개발한 Spectrochemical method (Carrier: NaCl, Internal standard: $La_2O_3$)로 정량 분석되었다. 본 연구에서 밝혀낸 국내 회중석 광내에 함유되는 희유 윈소의 종류는 모두 Al, Bi, Fe, Si, Mn, Pb, Mg, Sn, Mo, Cu, Sr, Cr, Y, Ag, Ti, Ni, As, Yb의 18개 원소이며, 이들은 각각의 절대적 및 상대적인 함량과 각 광화작용의 시기, 광상의 성인, 모암, 각 원소의 mobility 그리고 회중석광의 형광색 및 육안색과 비교 검토되었다. 본 연구의 결과로 회중석광이 정출되는 과정에서 유사한 지질환경의 물리화학적인 여건이 이루어지면 그 내에 함유되는 몇 성분원소들의 화학적인 특성은 매우 유사성을 보여주는 typochemical habit를 가짐을 알 수 있었다. 본 연구에서 밝혀진 한국산 회중석 광내의 희유성분(稀有成分)으로서 Y, Mn, Sr 원소들의 Geochemical mobility의 특성(特性)은 앞으로 회중석광의 심도탐광을 위하여 고려되어야하고, 더욱 연구개발되어야 할 것이다. 또한 상기 회중석 광내의 물리적 및 화학적으로 결합되어 있는 불순물의 희유성분들은 선광 제련 파정에서 금속성분의 추출농집공정(工程)에 유용한 자료가 될 것이다.

• Journal of Magnetics
• /
• 제9권4호
• /
• pp.116-120
• /
• 2004

Hexagonal barium-ferrite ($BaFe_{12}O_{19}$, magnetoplumbite structure; BaM) film with perpendicularly c-axis orientation was successfully deposited on (100) silicon substrates with an MgO (111) underlayer by rf diode sputtering and in-situ heating at $920^{\circ}C$. The magnetic and structural properties of 0.27 ${\mu}m$ thick BaM films on MgO (111) underlayers were compared to films of the same thickness deposited onto single-crystal MgO (111) and c-plane ($000{\ell}$) sapphire ($Al_2O_3$) substrates by vibrating sample magnetometry (VSM), x-ray diffractometer (XRD), and atomic force microscopy (AFM). The thickness dependence of MgO (111) underlayers on silicon wafer was found to have a large effect on both magnetic and structural properties of the BaM film. The thickness of 15 nm MgO (111) underlayers produced BaM films with almost identical magnetic and structural properties as the single-crystal substrates; this can be explained by the lower surface roughness for thinner underlayer thicknesses. The magnetization saturation ($M_s$) and the ratio $H_{cII}/H_{c{\bot}}$ for the BaM film with a 15 nm MgO (111) underlayer is 217 emu/cc and 0.24, respectively. This is similar to the results for the BaM films deposited on the single-crystal MgO (111) and sapphire substrates of 197 emu/cc and 0.10, 200 emu/cc and 0.12, respectively. Therefore, the proposed MgO (111) underlayer can be used in many applications to promote c-axis orientation without the cost of expensive substrates.

• Applied Biological Chemistry
• /
• 제35권2호
• /
• pp.82-86
• /
• 1992

복숭아로부터 polyphenoloxidase를 추출하여 polyphenol 화합물인 caffeic acid, hydroxyhydroquinone, homocatechol 그리고 pyrogallol과 반응시켜 얻어진 4종류의 효소적 갈변반응 생성물의 생리작용을 검토한 결과 rec-assay와 돌연변이원성시험에서 돌연변이원성을 나타내지 않았다. 4종류의 시료모두 S-9Mix를 첨가한 돌연변이원성 억제활성 실험에서 B(a)p, Trp-P-1의 변이물질에 대한 Ca-PEBRP와 HCa-PEBRP가 80% 이상의 강한 돌연변이원성 억제활성을 나타내었음을 알 수 있었다. 또한 rec-assay에서도 강한 대조구인 MMC와 MNNG에 대해 Py-PEBRP경우 생육저지대차를 17 mm에서 5 mm로 감소시켜 돌연변이 억제활성이 있는 것으로 나타났고, Hca-PEBRP, HHQ-PEBRP 그리고 Py-PEBRP에 $Zn^{2+}$의 첨가로 생육저지대의 차가 5 mm로써 DNA 손상에 영향을 미치는 것으로 나타났다.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.259-264
• /
• 2010

In continuous hot dip galvanizing process, oxide formation on steel surface has an influence on Zn wetting. High strength automotive steel contains high amount of Si and Mn, where Si-Mn composite oxides such as $Mn_2SiO_4$ or $MnSiO_3$ covers the surface after annealing. Zn wetting depends on how the aluminothermia reaction can reduce the Mn-Si composite oxides and then form inhibition layer such as $Fe_2Al_5$ on the steel surface. The outward diffusion of metallic ions such as $Mn^{2+}$, $Si^{2+}$ in the steel matrix is very important factor for the formation of the surface oxides on the steel surface. The surface state and grain boundaries provide an important role for the diffusion and the surface oxide reactions. Some elements such as P, Sb, and B have a strong affinity for the interface precipitation, and it influence the diffusivity of metallic ions on grain boundaries. B oxide forms very rapildly on the steel surface during the annealing, and this promote complex oxides with $SiO_2$ or MnO. P has inter-reacted with other elements on the grain boundaries and influence the diffusion through on them. Small addition of Sb could suppress the decarburization from steel surface and retards the formation of internal and external selective oxides on the steel surface. Interface control by the trace elements such as Sb could be available to improve the Zn wettability during the hot dip galvanizing.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.593-600
• /
• 1999

In order to determine the changes of sediment facies and metal levels in surface sediments after the construction of Shiwha Lake, surface sediments were sampled at 8 sites located on the main channel monthly from June, 1995 to August, 1996 and analysed for 12 metals (Al, Fe, Mn, V, Cr, Co, Ni, Cu, Zn, Cd, As and Pb) by ICP/AES and ICP/MS. Two groups of sampling sites(the inner lake with 3 sites and the outer lake with 5 sites) are subdivided by the surface morphology ; the inner lake is a shallow channel area with a gentle slope, while the outer lake is relatively deep and wide channel with a steep slope which has many small distributaries. After the construction of dam, fine terrestrial materials were deposited near the outer lake, which resulted in the change of major sediment facies from sandy silt to mud. With the deposition of fine sediments in the outer lake, anoxic water column induced the formation of sulfide compounds with Cu, Cd, Zn and part of Pb. Metal (Cr, Ni, Cu, Zn and Cd) contents in sediments increased up to twice within 2 years after the construction of dam. This is due to the direct input of industrial and municipal wastes into the lake and the accumulation of metals within the lake. In addition, frequent resuspension of contaminated sediments in a shallow part of the lake may make metal-enriched materials transport near the outer lake with fine terrestrial materials. As the enrichment of Cu, Zn, Cd and part of Pb in the Shiwha Lake may be related to the formation of unstable sulfide compounds by sulfate reduction in anoxic water or sediment column, the effect of mixing with open coastal seawater is discussed.