• 전기화학회지
• /
• 제8권4호
• /
• pp.172-176
• /
• 2005

차세대 5V급 양극활물질로 각광받고 있는 $LiNi_{0.5}Mn_{1.5}O_4$는 기존의 $LiMn_2O_4$ spinel 물질의 $Mn^{3+}$을 $Ni^{2+}$으로 치환하여 5V 영역에서 $Ni^{2+}/Ni^{4+}$ 산화/환원 반응이 가능하게 한 물질이다. 기존의 $LiMn_2O_4$는 낮은 초기 용량과 충 방전에 따른 빠른 용량감소를 보이는 단점을 가지고 있어 이 문제를 극복하기 위해 Mn의 일부를 다른 금속으로 치환하여 $LiM_yMn_{2-y}O_4$ (M=Cr, Al, Ni, Fe, Co, Cu, Ca)을 만드는 방법이 활발히 연구되고 있다. 본 연구에서는 기계 화학적 합성법을 이용하여 합성한 $LiNi_{0.5}Mn_{1.5}O_4$의 전기화학적 특성에 대해 연구하였다. 이 물질은 기존의 $LiMn_2O_4$보다 에너지 밀도가 높으며 저가 및 친환경성 등으로 앞으로 HEV 등에서 그 활용성이 크게 기대된다. 볼밀을 이용하여 여러가지 조건(출발물질 조건, 볼밀조건, 열처리조건 등)에서 $LiNi_{0.5}Mn_{1.5}O_4$을 합성한 결과 기계화학적 방법으로는 $Ni^{2+}$가 $Mn^{3+}$를 완전히 치환하지 못하여 $4.0{\sim}4.1V$의 전압에서 $Mn^{3+}/Mn^{4+}$의 산화/환원과 관련된 peak가 발생하였다. Ni 원료 물질로써 수산화 물질을 사용하고 열처리 온도를 $800^{\circ}C$로 하였을 때 최상의 성능을 나타내었다.

• 한국해양학회지:바다
• /
• 제25권2호
• /
• pp.9-25
• /
• 2020

가로림만 퇴적물에서 미량금속의 인위적인 영향을 평가하기 위하여 2010년과 2015년 총 77개의 표층 퇴적물 시료를 채취하여 물리적 특성 요소(입도 및 비표면적)와 지화학적 요소(주성분(Al, Ca, Fe, K, Ba) 및 미량금속(Mn, Cs, Cr, Co, Ni, Cu, Zn, Pb), 유기탄소 및 탄산칼슘)들을 분석하였다. 가로림만 표층 퇴적물의 평균 입도는 0.51-5.58 Ø(평균 3.98 Ø) 범위였으며 외만에서부터 내만으로 증가하였고, 수로에서 육지 방향으로 증가하였다. 일부 원소를 제외한 대부분의 금속 농도는 입자의 크기가 작아지고 비표면적이 증가함에 따라 증가하였다. 미량금속의 농도를 조절하는 요인을 추정하기 위하여 요인분석(factor analysis)을 실시하여, 총 3개의 요인을 추출(총 변이의 92.7%) 하였다. 요인 1은 총 변이의 71.3%를 설명하였는데 입도 요인이었고, 요인 2는 총 변이의 14.2%를, 요인 3에서는 총 변이의 7.2%를 설명하였다. 배경농도를 이용하여 농축인자를 계산하였다. 농축인자가 1.5 이상인 금속과 그 시료 수는 Cr 4개(정점 1, 16, 27, 39)와 Pb 1개(정점 39)였으나 이 들 금속에 대한 용출 금속 농도에서는 타 시료와 차이가 없었다. 가로림만의 총 금속 농도에 대한 1M HCl 용출 금속 농도의 백분율은 Pb~Co>Cu>Zn~Mn>Ni>Cr 순서로 감소하였으며 Pb은 입도에 따른 변화를 보였으나 다른 금속들은 모래를 제외하면 매우 일정한 값을 보였다. 이 값을 오염된 지역 및 청정 해역과 비교하면 모든 지역에서 Cu, Zn 및 Pb의 농도 수준과 관련없이 금속별 백분율이 유사하였다. 이는 1M HCl 용액과 퇴적물 구성 성분 사이의 반응 여부에 따른 결과라고 판단되고, 농축 정도를 판단하는데 이 용출 비율을 사용하는 것은 한계가 있음을 나타낸다.

• 한국대기환경학회지
• /
• 제32권6호
• /
• pp.603-612
• /
• 2016

The objective of this study was to estimate the emission characteristics for PM, $PM_{10}$, and $PM_{2.5}$ in the various stationary sources. The particulate matters collected in the various stationary sources such as power plants (Coal and B-C oil), incinerators(municipal and industrial waste), and glass furnaces. The PM and $PM_{10}$, PM and $PM_{2.5}$, $PM_{10}$ and $PM_{2.5}$ samples were collected using the cyclone type $PM_{10}$, $PM_{2.5}$ samplers and 30 species(19 inorganic species, 9 ionic species, OC and EC) were analyzed by ICP, IC, and TOR/IMPROVE methods. The mass concentrations of PM, $PM_{10}$, $PM_{2.5}$ from nine stationary sources ranged $0.63{\sim}9.58mg/Sm^3$, $0.26{\sim}7.47mg/Sm^3$ and $0.13{\sim}6.34mg/Sm^3$, respectively. The level of $PM_{10}$, $PM_{2.5}$ portion in PM calculated 0.63~0.99, 0.38~0.94, respectively. In the case of emission trend for species, power plant showed high concentrations for Al, Mg, Na, Si, V and $SO_4{^{2-}}$, respectively. Also, Ca, Fe, K, Si, $Cl^-$, and $K^+$ showed high in incinerator. In the case of glass furnace, Na, Pb, K, Si, $Na^+$ and $SO_4{^{2-}}$ represented high concentrations. Power plant showed higher EC/OC concentrations than other sampling sites. These results suggest the possible role for complement establishment process of emission inventory and emission management for PM.

• 동굴
• /
• 제19권20호
• /
• pp.29-62
• /
• 1989

Cheju Island, which was formed by volcanic activity, is an oval in its shape with the major axis 80km and the minor axis of 40km. The island holds in its heart Mt. Hanala rising 1,950m above the sea. Petrological study of this volcanic island has been made actively by Sang-Man Lee, Chong-Kwang Won and Moon-Won Li. The chronological measurements of the island by Chong-Kwan Won and Moon-Won Lee showed that it is composed of Sanbangsan trachytes and Backlokdam trachytes(25,000 year ago). These reports are based on the chemical analysis and the rediometric chronological measurements on the ground. However, there has been no reports about the inside of caves. We made an (composition) analysis of the inside of Manjang Cave by the fundamental parameter method in X-ray fluorescence spectrometry. The fundamental parameter method in X-ray fluorescence spectrometry is nondestructive analysis. and it enables us to make the values processed by a computer. The results obtained by this methods are as follows: SiO$_2$(49％), $Al_2$O$_3$(17％), Fe$_2$O$_3$(13％), CaO(8.1％), MgO(5.5％), Na2O(3.6％), TiO$_2$(2.1％), $K_2$O(0.86％), P$_2$O$_{5}$(0.28％), and MnO(0.20％) respectively. The data obtained by the fundamental parameter method in X-ray fluorescene was compared with the data provided by Chong-Kwan Won and Moon-Won Lee. Our measurement was made by K-Ar-method in cooperation with T. ITAYA. The samples are of 30,000-420,000 years ago. The composition of the values of our underground analysis with the existing values obtained by the analyses on the ground produced new data about Cehju volcanic island.d.

• 복식
• /
• 제39권
• /
• pp.79-89
• /
• 1998

This study was carried out the effect of stability and color extract for it's condition in the curcuma L.. dyeing. The stability is to investigate the absorbance of the curcumin, one of the major yellow pigments and the stability regarding the effect of light, oxygen temperature and pH. The dyeing condition is compared the effect of mordanting condition and the best way to extract pigment and analysed through the color-fastness rating, color-difference value test. The main results obtained are summarized as follows ; 1.The best and proper solvent to extrect curcumin pigment was a ethanol and a distilled water. 2. The light effect indicated that the absorbances of solution in absence of ligh was more stable. 3. The oxygen(O2) effect to curcumin show-ed that the condition in the absence of O2 was more stable than that in presence of O2 4. The temperature showed that the absorbnace was best stable in4$^{\circ}C$ and less changed at $25^{\circ}C$ 5. The curcumin-etanol solution was stable in pH 2~4. 6. Generally color-fastness rating to silk, wool and cotton indicated that crocking C.F. and perspiration C.F. were more than 3rd grade and dry cleaning C.F. was more than 4th grade. But light color-fastness and washing color-fastness were very poor. 7. To make good color fastness, the mordan-ting treated group and the pre-mordant conditions were more effective than others 8. When compared with color-difference value test indicated that the silk was looks like more reddish and bluish color and than the wool and cotton were greenish and bluish. As a mordant, A(C2H4OH(COOH3) and D(K2Cr2O7)were more effective to make green-ish color in the silk and the reddish color was abtained by B(Al.K(SO4)2.12H2O) and C(FeSO4.7H2O).

• 한국표면공학회지
• /
• 제31권6호
• /
• pp.334-344
• /
• 1998

Yew coating pmccss t.o form a surface layer ol CrN phasc on mild steel (A81 1020!, AlSI Hi3, 1Cr-0.5Mo steel (ASTM A213 and Nickrl-base superalloy (Inconel 718) was developed. Surlaces of various alloys t,n.ateii by chromizing for the formation ol Cr diffusion layer was subsequently trcaled by plasma nitriding in order t.o form the hard CrS coating layer on the surfaces. This duplex plasma surface tri-atments of chromizing and plasma nitriding have induced a lormation of a duplex-lrcated surfacr hyer of approximat~ls 70-80 $\mu\textrm{m}$thickncss with a iargcly improved microiiardnrss up to approxiniateW 1500Hv(50gf). The main cause for the lage improvment in the surface hardncss is altribilted to [.he fact that CrN and $Fe_xN$ phases are created successfully by ccliromizins and plasma nilriding treatment. High tenipera1,urc wear resislance of the duplex-treated mild steel and HI3 steels at $600^{\circ}C$ was examined. Comparing the duplex-treated specimens with the specimens treated only by chromizing, the rcsults shovmi that, thc wear volume of the duplex-treated mild skcl and 1113 stcel aSt.er a wear test, at $600^{\circ}C$ were reduced hy a Iactor of 8 and 3, respectively. Characteristics of the CrS phase by duplrx treatment were compared with $CrN_x$,/TEX> film by ion plating and the wear behaviors of CrN film lormed by two different nroccsses arc nea.riy identical.

• 한국환경보건학회지
• /
• 제36권1호
• /
• pp.61-71
• /
• 2010

Intensive measurements of airborne respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were conducted in the downtown area of Iksan city. The $PM_{2.5}$ and $PM_{2.5}$ samples were collected twice a day in the Iksan city of Korea from October 17 to November 1, 2004. The purpose of the study was to determine the inorganic water-soluble components and trace elements of $PM_{2.5}$ and $PM_{2.5}$ in the atmospheric environment and estimate the contribution rate of major chemical components from a mass balance of all measured particulate species. The chemical analysis for PM samples was conducted for water-soluble inorganic ions using ion chromatography and trace elements using PIXE analysis. The mean concentrations of respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were $51.4{\pm}29.7$ and $79.5{\pm}39.6\;{\mu}g/m^3$, respectively, and the ratio was 0.62. The ion species of $NO_3$, $SO_4^2$, and $NH_4^+$ were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These components predominated in respirable $PM_{2.5}$ fraction, while $Na^+$, $Mg^{2+}$, $Ca^{2+}$ mostly existed in coarse particle mode. Elemental components of S, Cl, K, and Si were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These elements, except for Si, were considered to be emitted from anthropogenic sources, while Si, Al, Fe, Ca existed mainly in coarse particle mode and were considered to be emitted from crustal materials. The averaged mass balance analysis showed that ammonium nitrate, ammonium sulfate, crustal component, and other trace elements were composed of 18.4%, 13.2%, 4.8%, 3.5% for PM2.5 and 17.0%, 11.6%, 13.7%, 4.4% for $PM_{2.5}$, respectively.

• 분석과학
• /
• 제30권4호
• /
• pp.182-193
• /
• 2017

In order to examine the variation characteristics of chemical compositions in relation to the inflow pathways of Asian dust, $PM_{10}$ and $PM_{2.5}$ aerosols were collected at Gosan site of Jeju Island during the Asian dust days between 2010 and 2015, and their chemical compositions were analyzed. The mean mass concentrations of $PM_{10}$ and $PM_{2.5}$ during Asian dust days were $130.0{\pm}90.2$ and $38.2{\pm}24.7{\mu}g/m^3$, respectively. The composition ratios of major secondary pollutants ($nss-SO_4{^{2-}}$, $NH_4{^+}$, $NO_3{^-}$) were high as 53.7 % for $PM_{10-2.5}$ and 90.6 % for $PM_{2.5}$. When the Asian dusts had been transported to the Korean Peninsula via Loess Plateau of central China, the concentrations of $nss-Ca^{2+}$, $NH_4{^+}$, $nss-SO_4{^{2-}}$, and $NO_3{^-}$ increased more noticeably. Whereas in case when the inflow pathways of Asian dust had been through the Bohai bay, the concentrations of the crustal species such as Al, Fe, and Ca were relatively high in coarse particles. The atmospheric aerosols were acidified largely by sulfuric and nitric acids. They were neutralized mainly by calcium carbonate in coarse particle mode passed through Manchuria area, but by ammonia in fine particle mode passed through Loess plateau and Bohai bay. Ammonium salts are assumed to exist as ammonium sulfate and ammonium nitrate in coarse particles, but mostly as ammonium sulfate in fine particles.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.331-336
• /
• 2017

Bacteria exist everywhere and continuously come into contact with daily surroundings and humans. Super bacterium methicillin-resistant Staphylococcus aureus, resistant to methicillin, has recently appeared. The morbidity and rate of death associated with super bacteria infection has increased. This study investigated the antibacterial activity of fabrics naturally dyed with Chamaecyparis obtusa leaves extract against methicillin-resistant Staphylococcus aureus. Fabrics were left for 15 min in a natural dyeing solution prepared by extraction from C. obtusa leaves using 11.3% (o.w.f) with a fixed liquor ratio of 1:22 at $40^{\circ}C$. The dyeing process was conducted using three different mordants; subsequently, the K/S value of the dyed fabrics increased in the order of None < Cu < Fe < Al. The color fastness property of the fabrics to washing, dry-cleaning, and rubbing was found to be excellent and ranked in the 4-5 grade. The color fastness to light of natural dyeing is low in most cases and has the problem that the dye color soon becomes bleached. Yet, in most cases cloth dyed with retinispora leaves, the color fastnezz to light was good with a third to fourth grade. Non-mordant fabrics, aluminum mordants, and copper mordants also showed better antibacterial properties (99.9% reduction) against methicillin-resistant Staphylococcus aureus, compared to the control fabrics. The dyed fabrics showed the same antibacterial activity even after three washes. The results highlight the strong potential of fabrics naturally dyed with C. obtusa-extract as a medicinal material with excellent antibacterial function against methicillin-resistant Staphylococcus aureus.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.179.2-179.2
• /
• 2011

바이오매스 가스화 프로세스 개발에 있어서 가장 기본적인 해결과제는 고발열량의 합성가스 제조, 냉가스 효율의 향상, 타르 발생량 저감 및 제거이다. 가스화 효율 향상에 대한 연구는 국내외 적으로 많이 이루어지고 있으나, 타르 발생량 저감에 대한 연구는 많이 이루어져 있지 않다. 타르는 분자량이 큰 방향적 탄화수소로 응축되면 점성이 높아 배관폐쇄, 정제설비의 압력손실 증가로 인해 운전정지 및 가스화율 저하의 원인이 된다. 가스화로에서 타르 발생량을 저감시키는 방법 중에는 Ni계 촉매를 이용하는 방법이 있으나, 카본 누적에 의한 활성저하, 알칼리금속에 의한 응집 등의 문제가 발생할 수 있다. 한편 철산화물은 합성가스 중의 C2-C3계의 타르를 분해하는데 효과가 알려져 있다. 따라서 본 연구에서는 적벽돌, 염색슬러지 회재 등에는 철산화물이 다량 함유되어 있는 것에 착안하여 폐기물중의 폐금속을 이용한 바이오매스 가스화에 대한 연구를 수행하였다. 점토광물계 폐기물인 적벽돌 파쇄물($SiO_2$ 67.2%, $Al_2O_3$ 19.7%, $Fe_2O_3$ 8.7%, $K_2O$ 2.0%, $TiO_2$ 1.2%, MgO 0.7%)을 전처리 한 후 유동매체로하여 우드펠렛을 가스화한 결과, 가스 생성량이 증가하고, 타르 및 탄화수소류가 감소하는 경향을 나타내었다. 특히 타르는 후단의 타르 트랩에서 타르가 거의 검출이 되지 않았다. 전처리를 하지 않은 적벽돌 파쇄물은 반응시간이 경과한 후에 가스화율이 증가함에 따라 철화합이 가스화로내에서 환원되어 타르를 분해하는데에는 어느 정도의 반응시간이 필요한 것을 확인하였다.