• Journal of Magnetics
• /
• v.6 no.3
• /
• pp.90-93
• /
• 2001

Co/$Al_O_3$/NiFe and CO/$Al_O_3$/Co tunnel junctions were fabricated by a radio frequency magnetron sputtering at room temperature with hard mask on glass and $4^{\circ}$ tilt cut Si (111) substrates. The barrier layer was formed through two steps. After the Al layer was deposited, it was oxidized in the chamber of a reactive ion etching system (RIE) with $O_2$plasma at various conditions. The dependence of the TMR value and junction resistance on the thickness of Al layer (before oxidation) and oxidation parameters were investigated. Magnetoresistance value of 7% at room temperature was obtained by optimizing the Al layer thickness and oxidation conditions. Circular shape junctions on $4^{\circ}$tilt cut Si (111) substrate showed 4% magnetoresistance. Photovoltaic energy conversion effect was observed with the cross-strip geometry junctions on Si substrate.

• Corrosion Science and Technology
• /
• v.10 no.1
• /
• pp.6-12
• /
• 2011

The selective surface oxidation of a transformation-induced-plasticity (TRIP) steel containing 1.6 wt.% Mn and 1.5 wt.% Si during annealing at $800^{\circ}C$ was investigated for its influence on the formation of an inhibition layer during hot-dip galvanizing. The selective oxidation of the alloying elements and the oxide morphology were significantly influenced by the annealing atmosphere. The pure $N_{2}$ atmosphere with a dew point $-40^{\circ}C$ promoted the selective oxidation of Mn as a crystalline $Mn_{2}SiO_{4}$ phase, whereas the $N_{2}$ + 10% $H_{2}$ atmosphere with the same dew point $-40^{\circ}C$ promoted the selective oxidation of Si as an amorphous Si-rich oxide phase. During hot-dip galvanizing, the $Mn_{2}SiO_{4}$ phase was reduced more readily by Al in the Zn bath than the Si-rich oxide phase. Consequently, the pure $N_{2}$ atmosphere resulted in a higher formation rate of $Fe_{2}Al_{5}$ particles at the Zn/steel interface and better galvanizability than the $N_{2}$ + 10% $H_{2}$ atmosphere.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.494-500
• /
• 2003

The effects of $Al_2$O$_3$ addition upon the sintering range of clay-EAF dust (the specified wastes produced from steel making process) system body which would be used as a constructing bricks were investigated. The slope of apparent density to sintering temperature decreased for Clay-dust body containing 5~15 wt% A1203 sintered at 1200-125$0^{\circ}C$, and the absorption(%) of specimen sintered above 125$0^{\circ}C$ decreased due to the formation of open pores produced by pore bloating. For the specimen without any $Al_2$O$_3$ addition sintered at 1275$^{\circ}C$, the major phase was cristobalite, the small amount of mullite (3Al$_2$O$_3$ 2SiO$_2$) formed and the hematite (Fe$_2$O$_3$) remained. In the Clay-dust system body containing $Al_2$O$_3$ 15 wt%, however, the cristobalite disappeared and the major phase was mullite. Also the part of $Al_2$O$_3$ reacted with hematite to form hercynite (FeAl$_2$O$_4$). From the these results, addition of $Al_2$O$_3$ to Clay-dust system body enlarges a sintering range; decreasing an apparent density and absorption slop to sintering temperature owing to consumption of liquid phase SiO$_2$ at higher temperature and gas-forming component Fe$_2$O$_3$ at reduced atmosphere which would decrease an amount of liquid formed and increase the viscosity of the liquid produced during the sintering process.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.118-122
• /
• 2000

MR characteristics of $Al_2$ $O_3$ based magnetic tunneling juction with various $Al_2$ $O_3$ thicknesses were investigated. Spin-dependent tunneling junctions, in which the tunneling barrier $Al_2$ $O_3$ is formed by depositing a 1-3 nm thick Al layer, followed by thermal oxidation at room temperature in an $O_2$atmosphere, were fabricated on 4$^{\circ}$tilt(111)Si substrate in 3-gun magnetron sputtering system. The top and bottom ferromagnetic electrodes were Ni$_{80}$Fe$_{20}$ and Co. A maximum Tunneling MR ratio of 14% was obtained in the junction of which insulating barrier thickness was 2 nm. By increasing the tunneling voltage across the junction, maximum MR ratio reduced and finally showed no MR characteristics.s.

• Tribology and Lubricants
• /
• v.9 no.2
• /
• pp.63-69
• /
• 1993

The wear properties of two types of $Si_3N_4$(silicon nitride) exposed to high and low humidity were examined experimentally for various sliding speed. Bearing steel was used as the disk material at pin-on-disk type sliding. Wear rates of pressureless sintered-plus-hot-isostatic pressed Si3N4 were slightly lower than those of pressureless sintered $Si_3N_4$. It was observed that adsorbed moisture and sliding speed markedly influenced the wear properties of $Si_3N_4$. The highest wear rate was obtained under the high humidity and low sliding speed condition. As the sliding speed was increased, wear rates were decreased and the humidity effect on the wear rates of $Si_3N_4$ was lowered. The result that the $Si_3N_4$ pin showed a high wear rate under the high humidity condition was explained by the property change due to the adsorbed moisture, plowing action by the hard particles of $Fe_2O_3$ from the disk, and the corrosion effect at $Si_3N_4$ surface. Increase in sliding speed was supposed to have reduced the humidity effect on wear rate of $Si_3N_4$ by raising the temperature of both the bearing steel disk and $Si_3N_4$ pin specimen.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2015

(111)-oriented and random oriented $Pb_{0.8}Ba_{0.2}ZrO_3$ (PBZ) perovskite relaxor ferroelectric thin films were fabricated on Pt(111)/$TiO_x$/$SiO_2$/Si substrate by sol-gel method. Nano-scaled antiferroelectric and ferroelectric two-phase coexisted in both (111)-oriented and random oriented PBZ thin film. High dielectric tunability (${\eta}=75%$, E = 560 kV/cm) and figure-of-merit (FOM ~ 236) at room temperature was obtained in (111)-oriented thin film. Meanwhile, giant electrocaloric effect (ECE) (${\Delta}T=45.3K$ and ${\Delta}S=46.9JK^{-1}kg^{-1}$ at $598kVcm^{-1}$) at room temperature (290 K), rather than at its Curie temperature (408 K), was observed in random oriented $Pb_{0.8}Ba_{0.2}ZrO_3$ (PBZ) thin film, which makes it a promising material for the application to cooling systems near room temperature. The giant ECE as well as high dielectric tunability are attributed to the coexistence of AFE and FE phases and field-induced nano-scaled AFE to FE phase transition.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.599-609
• /
• 1999

Talc durg has been used at Oriental Medical Hospital of Kyung San University, and was analysed for mineralogical and geochemical studies. It consists mainly of talc with small amount of tremolite, dolomite and bursite, and its chemical compositions of MgO 31.65% and $SiO_2$ 61.0%, and cotain less inpurtities. Moreover, talc from the Dong Yang Talc mine is associated with calcite, gypsum and anhydrite, which belong to more soluble mineral drugs than talc, and contains Ca and Fe. These elements may give at least medical medical to talc durg as in the case of actinolite. Therfore, talc of high quality from the Dong Yang Tacl Mine may be used instead of imported expensive talc durg. Diagrams of log $a_{Mg^{2+}}$-pH and log $a_{Mg^{2+}}/a{\array{2\\H^+} $-log $a_{H_4SiO_4}$- may be used as basic data to predict and examine soluble contents of durg for medical experiments.

• Journal of Conservation Science
• /
• v.33 no.4
• /
• pp.297-312
• /
• 2017

In the ancient iron-making process, a slag former was often added so that iron and other minerals in the ore could be smoothly separated. However, there are insufficient data for judging whether a slag former was added. Thus, in this study, we conducted a smelting experiment to understand the material characteristics of a steel structure that differed depending on the addition of a slag former. It was found that the steel structure produced in the first experiment had a total Fe content of 39.45-52.94 wt%, which decreased to 34.89-38.92 wt% in the second and third experiments. CaO compounds such as calcite, gehlenite, and hercynite appeared, in addition to iron oxides, after the addition of a slag former. As a result of an assessment of whether a slag former was added by comparing the ratio between the components, it was found that the ratio of $CaO/SiO_2$ was 0.42. From a comparative analysis of $Al_2O_3/SiO_2$ and $CaO/SiO_2$, it was judged that the ratio of $Al_2O_3$ and $SiO_2$ can be utilized as an index to judge similar systems of smelting process (ore, furnace wall, and fuel).

• Conservation Science in Museum
• /
• v.27
• /
• pp.67-90
• /
• 2022

A C-46 transport aircraft, which can be thought of as a large cultural heritage item from the modern period, was subjected to paint analysis and conservation treatment in preparation for its exhibition. The C-46 is the first aircraft ever dispatched to overseas combat zones by the Korean Air Force and carried out missions during the Vietnam War. The aircraft is mainly made of aluminum and shows signs of corrosion on its surface, including pitting and etching, as well as gray and white powdery attachments. In the analysis of the paint, diatomite(SiO₂·nH₂O) was confirmed in the red paint, titanium dioxide(TiO₂) was identified in the white paint, black iron oxide(Fe₃O₄) was detected in the black paint, and colcothar(Fe₃O₄) mixed with putty was confirmed in the blue paint. Infrared spectroscopy revealed the use of alkyd resin in the paint on the main body and nitrocellulose in the Taegeuk pattern. During the conservation treatment, mechanical cleaning, such as sanding, was conducted to remove paint and varnish from the surface. Corrosion was removed by sanding and cleaning with chemical solvents, and new paints and varnishes were applied. Through the paint analysis and conservation treatment, the aircraft was made available for exhibition in a stable condition.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.111-122
• /
• 1997

Provenance type and paleoclimate of the Jinju and Iljig formation were studied on the basis of compositions of sandstones from the western Euiseong area in the northern part of Kyong-sang basin. The average compositions of quartz, feldspar and lithic grain(Q:F:L) from the sandstones are 53:40:7 and 50:46:4 for Jinju and Iljig formations, respectively. The values fall into the arkosic arenite field. Petrographic detrital modes of the sandstones mainly suggest transitional continental block for the tectonic setting of the provenance. All sandstones from the Jinju and IIjig formations show chemical compositions close to average values of arkose(Pettijohn, 1975). $Na_2O$ contents is relatively high. $Fe_2O_3$(total iron) and MgO contents decrease with increasing $SiO_2$ contents since the framework grains of arkoses supposed to be derived from granitic rocks are poor in ferromagnesian minerals. The detrital framework grains still possess climatic signs even though the grains were more or less altered during deep burial. Bivariant plot of Suttner and Dutta(1986) suggests semi-arid to semi-humid paleoclimate during the deposition of the Jinju and Iljig sandstones.