• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.83-93
• /
• 2011

Biochemical and enzymatic characterization for extracellular protease isolated from Cordyceps militaris cultivated on rice bran medium was investigated. C militaris produced proteolytic enzymes from 10 days after inoculation, maximum enzyme production was found at 25 days. The optimum temperature and pH of proteases production was at $25^{\circ}C$ and pH 7.0, respectively. The protease activity was observed in the four peaks (Pro-I, Pro-II, Pro-III, and Pro-IV) separated through Sephadex G-100 column chromatography. The separated protease was optimally active at $25^{\circ}C$. Optimum pH of the protease was between 7 and 8. Enzyme was also stable over at $30-80^{\circ}C$. The enzyme was highly stable in a pH range of 4-9. Protease activity was found to be slightly decreased by the addition of $Mg^{2+}$, $Mn^{2+}$, $Zn^{2+}$, $Fe^{2+}$ and $Cu^{2+}$, whereas inhibited by the addition of $Ca^{2+}$ and $Co^{2+}$ Protease activity was inhibited by protease inhibitor PMSF. On the other hand, the partially purified protease was investigated on proteolytic protease activity by zymogram gel electrophoresis using three substances (casein, gelatin and fibrin). Four active bands (F-I, FII, F-III, and F-IV) of fibrin degradation were revealed on fibrin zymogram gels. Both of F-II and FIII showed caseinolytic, fibrinolytic and gelatinolytic activities in three gels. Thermostability, pH stability, and pH-thermostability of the enzyme determined the residual fibrinolytic activity also displayed on fibrin zymogram gel. The only one enzyme (F-II) displayed over a broad range of temperature at $30-90^{\circ}C$. The FII displayed fibrinolytic activity in the pH range 3-5, but was inactivated in the range of pH 6-11. The F-I and F-III showed enzyme activity in the pH range of 6-11. In the pH-thermostability, the F-II only kept fibrinolytic activity after heating at $100^{\circ}C$ for 10, 20 and 30 min at pH 3 and pH 7, respectively. On the other hand, the F-II was retained activity until heating for 10 min under pH 11 condition. By using fibrin zymogram gel electrophoresis, extracellular fibrinolytic enzyme F-II from C. militaris showed unusual thermostable under acid and neutral conditions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.152-160
• /
• 2021

Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled. For recycling BOF and identify its applicability as fine aggregate, this study investigates the fundamental characteristics of mortar with cement replaced ferronickel slag(FNS), which has the potential to be used as a binder. The results suggest that the mineral phases of BOF slag mainly include larnite(CaSiO₄), mayenite(Ca₁₂Al₁₄O₃₃) and wuestite(FeO) while olivine crystallines are shown in FNS. The results of flow and setting time reveals that the flowability and process of hardening increased when the amount of FNS and BOF slag incorporated was increased. The length change shows that the amount of change in the length of the mortar was almost constant regardless of mix proportion while compressive strength was reduced. Micro structure test results revealed that FNS or/and BOF slag mix took a long time to react in the cement matrix to form a complete hydration products. To achieve the efficient utilization of B OF slag as construction materials, proper replacement rate is necessary.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.129-137
• /
• 2009

Corrosion behaviors of TiN coated dental casting alloys have been researched by using various electrochemical methods. Three casting alloys (Alloy 1: 63Co-27Cr-5.5Mo, Alloy 2: 63Ni-16Cr-5Mo, Alloy 3: 63Co-30Cr-5Mo) were prepared for fabricating partial denture frameworks with various casting methods; centrifugal casting(CF), high frequency induction casting(HFI) and vacuum pressure casting(VP). The specimens were coated with TiN film by RF-magnetron sputtering method. The corrosion behaviors were investigated using potentiostat (EG&G Co, 263A. USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion morphologies were analyzed using FE-SEM and EDX. Alloy 1 and Alloy 2 showed the ${\alpha}-Co$ and ${\varepsilon}-Co$ phase on the matrix, and it was disappeared in case of TiN coated Alloy 1 and 2. In the Alloy 3, $Ni_2Cr$ second phases were appeared at matrix. Corrosion potentials of TiN coated alloy were higher than that of non-coated alloy, but current density at passive region of TiN coated alloy was lower than that of non-coated alloy. Pitting corrosion resistances were increased in the order of centrifugal casting, high frequency induction casting and vacuum pressure casting method from cyclic potentiodynamic polarization test.

• Fisheries and Aquatic Sciences
• /
• v.24 no.7
• /
• pp.260-275
• /
• 2021

Aquaponics is a cultivation system that combines aquaculture and agricultural hydroponics. This study investigated the productivity of leafy vegetables cultivated in the hybrid biofloc technology-aquaponics (HBFT-AP) using Japanese eel fed two kinds of diets (Mash, commercial powdered feed and extruded pellet [EP]) and hydroponics (HP).The mash was fed to the fish in a type of a dough mixed with water for 6 weeks (Exp1) and switched to the EP containing 2.7% monobasic potassium phosphate (MKP) for subsequent 6 weeks (Exp2). Leafy vegetables of 8 cultivar were employed in the experiment and water quality [dissolved oxygen (DO, mg/L), pH, water temperature (℃), electrical conductivity (EC; ㎲/cm), turbidity (NTU), TAN (NH₃ + NH₄⁺) (mg /L), NO₂-N (mg/L), NO₃-N (mg/L) and PO₄-P (mg/L)] was measured 6 times a week. Leafy vegetable productivity (HBFT-AP vs HP) was compared in respective experiment, which was similar or somewhat higher in HBFT-AP. During the 12-week feeding trial, concentrations of nitrite (NO₂-N) and phosphorus (PO₄-P) were kept low in variability while total ammonia nitrogen (TAN) and NO₃-N levels increased with time in HBFT-AP. At the end of two feeding trials, values of weight gain (WG, %), feed efficiency (FE, %), specific growth rate (SGR, %) and protein efficiency ratio (PER) were higher in Exp2 than in Exp1. As well, higher values in hematocrit (PCV, %), plasma K (mEq/L) and inorganic phosphorus (mg/dL) were found (p < 0.05) in Exp2 where fish were fed the EP (EP: 38.60%, 2.80 mEq/L and 7.04 g/dL; Mash: 33.20%, 1.95 mEq/L and 5.50 g/dL). Leafy vegetables in HBFT-AP using Japanese eel fed the EP with MKP 2.7% had a productivity similar (4 kinds of cultivar) or somewhat higher (4 kinds of cultivar) compared to those in HP. Also, Japanese eel fed the EP showed higher values of Pi (m/dL) and K (mEq/L) in plasma compared to those fed commercial powder diet.

• Analytical Science and Technology
• /
• v.20 no.6
• /
• pp.516-523
• /
• 2007

Purification of silica mineral has been investigated by acid leaching of pulverized silica. A series of studies has been carried out on the effect of leaching silica powder as a function of the leaching time at the constant temperature of $80^{\circ}C$ in oxalic acid, aqua regia, and two mixed acids of HF/HCl, $HF/HNO_3$. The impurities of silica and leachantes were measured by neutron activation analysis (NAA), inductively coupled plasma atomic emission spectrometry (ICP-AES), atomic absorption spectrometry, x-ray fluorescence (XRF) method and wet analysis (WA). Certain metals, such as sodium, calcium, iron, aluminium and titanium, have been found in concentrations of hundreds or even thousands of mg/kg. Comparison of purification processes of silica and analytical methods of impurities in the silica was conducted in this study.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.799-816
• /
• 2023

Mineralogical and geochemical studies of shales within the Lower Anambra Basin was conducted to unravel the depositional environment, provenance, maturity, paleo-weathering conditions, and tectonic settings. Mineralogical studies conducted using X-ray diffraction analysis revealed that the samples were composed of kaolinite, montmorillonite, chlorite, and illite. KaolinIite is the dominant mineral, constituting approximately 41.5% of the bulk composition, whereas the non-clay minerals are quartz, ilmenite, and sillimanite. Geochemical analysis showed a predominance of SiO₂, Al₂O₃, and Fe₂O₃ contents of the shale samples with mean values of 52.29%, 14.09%, and 6.15% for Imo Shale (IS); 52.31%, 16.70%, and 7.39% for Mamu Shale (MS); 43.21%, 21.33%, and 10.36% for Enugu Shale (ES); 53.35%, 15.64%, and 7.17% for Nkporo Shale (NS); and 51.24%, 17.25%, and 7.78% for Agwu Shale (AS). However, the shales were depleted in Na₂O, MgO, K₂O, MnO, TiO₂, CaO, and P₂O₅. The trace element ratios of Ni/Co and Cu/Zn of the shale suggest an oxic depositional environment. The average SiO₂ vs. Al₂O₃ ratio of the shales indicated textural maturity. Compared to the PAAS standard, the shales plot below the PAAS value of 0.85, suggesting a high degree of maturity and intensive chemical weathering, further confirmed on a CIA vs. PIA plot. On log (K₂O/Na₂O) against SiO₂ and tectonic setting discriminant function diagrams, the shales plot mostly in the field of passive continental margin tectonic setting. The discriminant function diagrams as well as Al₂O₃/TiO₂ ratio of the shales showed that they were derived from a mixed source (mafic and intermediate igneous rocks).

• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.20-26
• /
• 2010

This study was conducted to reclassify Donggui series based on the second edition of Soil Taxonomy and to discuss the formation of Donggui series in Jeju Island. Morphological properties of typifying pedon of Donggui series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has very dark grayish brown (10YR 3/2) silt loam A horizon (0~17 cm), gravelly very dark grayish brown (10YR 3/2) silt loam BA horizon (17~42 cm), gravelly very dark grayish brown (10YR 3/2) silty clay loam Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay Bt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay Bt3 horizon (105~150 cm). It is developed in lava plain and are derived from basalt and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85% phosphate retention, and higher bulk density than 0.90 $Mg/m^3$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol and Inceptisol. It has udic soil moisture regime, and can be classified as Udalf. Also that meets the requirements of Typic Hapludalf. It has 18-35% clay at the particle-size control section, and have thermic soil temperature regime. Therefore Donggui series can be classified as fine loamy, mixed, thermic family of Typic Hapludalfs, not as fine silty, mixed, thermic family of Dystric Eutrudepts.

• Economic and Environmental Geology
• /
• v.27 no.2
• /
• pp.171-180
• /
• 1994

Several ultramafic bodies and ultramafic origin talc deposits are distributed in Chungnam province near the contact zone with Ogchun fold belt They occur as discontinued belt form with northeast trending, and most of them are more or less sepentinized. Major, trace, and rare earth elements analyses were made of the ultramafics from the study area to constrain their origin and genetic relationships. Compared to the primitive mantle estimates of privious workers, the correlations defined by the studied rock samples indicate similar Ni but very lower $Al_{2}O_{3}$, CaO and $TiO_{2}$ contents. It is inferred that source material of the studied rocks might be residual mantle which had undergone a large degree of partial melting event. The REE patterns show relatively flat to enriched in LREE (chondrite normalized La/Yb and Sm/Yb ratios are 1.1-5.2 and 1.2-1.6). Several alternative explaination are possible for LREE enrichment patterns in the studied ultramafic rocks such as 1) enrichment due to late stage alteration, 2) enriched pre-melting composition, and 3) mixing of two components. Based on the result, the LREE enrichment characteristic of the studied rocks might be result from the mixture of two geochemically distinct components; one is depleted residual mantle and the other component which determine the abundances of incompatible elements and responsible for the LREE enrichment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.245-253
• /
• 2011

Purpose: The aim of this in vitro study was to estimate surface characteristic after peptide coating and investigate biological response of human mesenchymal stem cell to anodized titanium discs coated with RGD peptide by physical adhesion and chemical fixation. Materials and methods: Fluorescence isothiocyanate (FITC) modified RGD-peptide was coated on the anodized titanium discs (diameter 12 mm, height 3 mm) using two methods. One was physical adhesion method and the other was chemical fixation method. Physical adhesion was performed by dip and dry procedure, chemical fixation was performed by covalent bond via silanization. In this study, human mesenchymal stem cell was used for experiments. The experiments consisted of surface characteristic evaluation after peptide coating, analysis about cell adhesion, proliferation, differentiation, and mineralization. Obtained data are statistically treated using Kruskal-Wallis test and Bonferroni test was performed as post hoc test (P=.05). Results: The evaluation of FE-SEM images revealed no diffenrence at micro-surfaces between each groups. Total coating dose was higher at physical adhesion experimental group than at chemical fixation experimental group. In cell adhesion and proliferation, RGD peptide coating did not show a statistical significance compared with control group (P>.05). In cell differentiation and mineralization, physical adhesion method displayed significantly increased levels compared with control group and chemical fixation method (P<.05). Conclusion: RGD peptide coating seems to enhance osseointegration by effects on the response of human mesenchymal stem cell. Especially physical adhesion method showed more effective than chemical fixation method on response of human mesenchymal stem cell.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.519-525
• /
• 2010

Kwamegi, a traditional Korean food, is made from the flesh of Pacific saury (the fish Cololabis saira semi-dried in a cold wind off the sea, and is well known in Korea as a valuable health food. Recently, several functional materials have been developed for supplementation of Kwamegi. Here, we compared and analyzed the nutrient composition, including overall composition and mineral, vitamin, fatty acid, and amino acid levels, of several commercial Kwamegi samples prepared with addition of functional components (unsupplemented Kwamegi, Kwamegi with chitosan, and Kwamegi overlaid with gold leaf). The levels of moisture (26.4-30.8%), crude protein (29.1-32.7%), and crude ash (1.6-1.9%) did not differ greatly among samples. However, the crude lipid content of Kwamegi overlaid with gold leaf (KOGL, 32.2%) was greater than that of untreated Kwamegi (CK, 24.5%) or of Kwamegi with added chitosan (KAC, 22.9%). The levels of vitamin $B_2$ (1.8-2.0 mg/100 g) and vitamin C (6.6-6.7 mg/100 g) did not differ greatly among Kwamegi samples. However, CK had a higher vitamin A content and a greater vitamin A potency than did KAC or KOGL. The various Kwamegi samples tested contained similar levels of fatty acids and amino acids. In conclusion, no particular differences in nutrient composition were evident when commercial Kwamegi samples supplemented with functional ingredients were tested