• 한국미생물·생명공학회지
• /
• 제26권3호
• /
• pp.257-263
• /
• 1998

Alcaligenes eutrophus의 세포배양액(23-210 g dry weight/L)으로부터 균체 회수 효율에 미치는 철계 응집제 첨가 효과에 대해 연구하였다. 응집제로는 무기 응집제인 Fe$_2$(SO$_4$)$_3$과 무기 고분자 응집제인 Ferix-3를 사용하였다. 철계 응집제는 3-13의 넓은 pH 범위에서 응집효과를 나타내었으며, 배양액의 pH가 증가할수록 floc의 크기는 증가하였다. 균체 회수를 위한 배양액의 최적 pH는 10-13이었다. 최적 응집제의 첨가량은 세포농도가 증가함에 따라 증가하였는데, 무기응집제인 Fe$_2$(SO$_4$)$_3$보다는 무기고분자응집제인 Ferix-3이 적은 농도에서 응집 효율이 우수함을 알 수 있었다. 210 g/L의 세포농도 배양액에 Ferix-3을 1300 mg Fe/L를 첨가하면 45$\times$g의 낮은 원심력에 의해 95%이상의 균체를 회수 가능하였다. 응집제의 요구량은 배양액 중의 NH$_4$$^{+}$ 농도에 비례하여 증가하였고, 배양액 중의 NH$_4$$^{+}$ 농도가 1 g 증가하면 응집제가 0.066 g Fe$_3$$^{+}$정도 더 요구되었다.

• 대한화학회지
• /
• 제48권4호
• /
• pp.358-366
• /
• 2004

두개의 sulphato로 다리걸친 착물 $[Cr_2(NH_2)_2(H_2O)_2(SO_4)_2]{\cdot}2H_2O$, 말단 3개의 isocyanato $[Cr(NCO)_3(H_2O)]{\cdot}3H_2O$ 화합물과 갈철광 $[FeO(OH)]{\cdot}0.2H_2O$ 화합물들은 각각의 $Cr_2(SO_4)_3{\cdot}xH_2O, Cr(CH_3COO)_3, Fe_2(SO_4)_3$과 $80^{\circ}C$, 수용액에서 요소와 반응으로 합성되었다. 생성물들의 IR 스펙트럼에서 요소(urea)의 띠가 나타나지 않지만, 결합된 아마이드(amide), 물, 연결된 sulphato와 isocyanato 그룹에 대해서 특징적인 띠를 보인다. 착물들에 대한 열무게분석(TG)과 시차열분석법(DTA) 측정을 기록하였다. 얻어진 데이터들은 예상했던 구조화 잘 일치한다. 형성에 대한 설명과 화합물의 열역학적 분해에 대한 일반적인 메커니즘을 제시하였다.

• 한국자기공명학회논문지
• /
• 제21권2호
• /
• pp.67-71
• /
• 2017

At high temperature, the roles of $NH_4$ and $H_2O$ in $(NH_4)_2Fe(SO_4)_2{\cdot}6H_2O$ and $(NH_4)_2Zn(SO_4)_2{\cdot}6H_2O$ single crystals were investigated using a pulse NMR spectrometer. Temperature was shown to have a significant influence, causing changes in the deformation of $NH_4$ and $H_2O$. From the $^1H$ NMR and $^{14}N$ NMR spectrum, the forms of environment surrounding $^{14}N$ in $NH_4$ groups is more important than the loss of $H_2O$ groups. NMR studies indicate that $NH_4{^+}$ ions in Tutton salts play an important role in the changes of the crystal structure at high temperatures.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1115-1122
• /
• 2001

여기에너지에 따라서 $Y_2$O$_3$:Eu 형광체의 활성제의 농도 변화 및 적색안료인 $\alpha$-Fe$_2$O$_3$ 미립자를 형광체 표면에 코팅함에 있어 표면처리 방법 변화에 따른 발광 특성의 변화를 연구하였다. 형광체 표면처리방법은 FeSO$_4$를 이용하여 에멀젼 드라이 방식으로 $\alpha$-Fe$_2$O$_3$미립자를 만들어 형광체 표면에 흡착법과 FeSO$_4$/에탄올을 이용하여 액상에서 생성된 침전물을 형광체 표면에 침전시킨 침전법을 사용하였다. 고상법으로 합성된 $Y_2$O$_3$:Eu 형광체의 경우 여기에너지에 따라서 최고 휘도를 나타내는 활성제의 첨가량이 다르게 나타났으며, 활성제의 함량이 진공자외선(147nm)과 저 전압 영역(400V)에서는 0.02mol이고 5kV에서는 0.03mol이었다. 색순도 향상을 위한 안료가 표면 처리되면 형광체의 발광 휘도가 감소한다. 표면처리는 여기에너지에 따라서 다른 방법을 사용해야한다. 진공자외선과 저 전압 영역에서는 불균일 한 막을 형성하는 흡착법으로 표면처리를 해야하고, 고전압영역에서는 침전법으로 표면 처리하는 것이 유리하다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1309-1315
• /
• 2000

Sixteen Large $White{\times}Landrace$ pigs 12 weeks of age, with an average body weight of $22.9{\pm}2.12kg$ were fed four experimental diets; a commercial grain-based grower diet (control); or a diet containing 20% of either sun-dried leucaena leaf meal (LLM), water soaked LLM or $FeSO_4-treated$ LLM, replacing the basal diet. There was a significant (p<0.05) decrease in live weight gain, feed intake and feed conversion efficiency (FCE) in pigs fed the diet containing sun-dried LLM. Growth rate, feed intake and FCE were not affected by the addition of water-soaked and FeSO4-treated LLM to the basal diet. Triiodothyronine $(T_3)$ and thyroxine $(T_4)$ levels in the blood plasma were not affected by the dietary treatments. Addition of $FeSO_4-treated$ LLM to the basal diet significantly (p<0.05) reduced the back fat thickness of the pigs.

• 한국환경보건학회지
• /
• 제12권1호
• /
• pp.1-14
• /
• 1986

This investigation was carried out on the study of Ferrite formation by aerial oxidation of Fe $(OH)_2$ suspension of aqueous solution containing heavy metal ions. In this study the optimum reactionary condition of the Ferrite formation in Batch reactor wa studied by aerial oxidation which are subjected to various reaction time and temperature, under the different kinds of R(2NaOH/$FeSO_4$) Values, pH, Air flow rate, and $Fe^2+/M^2+$ mole ratio. The optimum condition for the Ferrite formation in Batch reactor was such that residence Time was 90 min., Temperature $65{\circ}$C, pH 11.0, Air flow rate 2.0l/min and $Fe^{2+}/M^{2+}$ mole ratio 4.0, which was observed by X-Ray diffraction analysis. The relation R-value, pH and ORP affecting the formation of Ferrite is that the jump step in pH 11.0, when a amount of NaOH is added, is steady state to the formation of Ferrite. Effect of R-value of $FeSO_4$ and $FeCl_2$ on the formation of Ferrite in different from each other the optimum condition of the in different from each other the optimum condition of the $FeCl_2$ is R-value 0.7, pH 11.0 and the $FeSO_4$ R-value 1.2, pH 11.0.

• Journal of Electrochemical Science and Technology
• /
• 제9권2호
• /
• pp.85-92
• /
• 2018

Olivine structure of $LiFePO_4$ (LFP) is one of the most commonly used materials in aqueous rechargeable lithium batteries (ARLBs), and can store and release charge through the insertion/de-insertion of $Li^+$ between LFP and FP. We have fabricated LFP and LFP/FP electrodes on titanium paper and studied their electrochemical properties in 2 M $Li_2SO_4$. The LFP/FP electrode was determined to be a suitable electrode for electo-ostmotic pump (EOP) in terms of efficiency in water and 0.5 mM $Li_2SO_4$ solution. Experiments to determine the effect of cations and anions on the performance of EOP using LFP/FP electrode have shown that $Li^+$ is the best cation and that the anion does not significantly affect the performance of the EOP. As the concentration of $Li_2SO_4$ solution was increased, the current increased. The flow rate peaked at $4.8{\mu}L/30s$ in 1.0 mM $Li_2SO_4$ solution and then decreased. When the EOP was tested continuously in 1.0 mM $Li_2SO_4$ solution, the EOP transported approximately 35 mL of fluid while maintaining a stable flow rate and current for 144 h.

• 방사성폐기물학회지
• /
• 제5권1호
• /
• pp.85-90
• /
• 2007

양이온교환수지인 IRN-77을 직접 분해 처리하기 위하여 Fonton시약을 적용하였으며, 분해반응의 특징으로써 반응의 효율 및 안전을 위해 수지를 먼저 건조시키고 $FeSO_4$ 용액을 수지에 완전히 흡수시킨 후 $H_2O_2$를 첨가하는 방법을 적용하였다. 수지 분해반응의 특성은 반응이 개시되기까지 반응유도시간이 필요하였으며, 반응유도시간은 $FeSO_4$의 농도가 낮을수록 또한 $H_2O_2$의 초기 첨가량이 적을수록 길었다. 단위량의 수지를 분해하는데 적절한 반응조건으로서 $FeSO_4$의 농도는 0.9 M 및 15% $H_2O_2$의 용액의 첨가량은 수지량에 대해 6-7배 비율로 나타났으며, 반응유도시간을 포함하여 1.5시간 이내에 완전 분해가 가능하였다. $H_2O_2$의 첨가방법은 반응 초기 및 반응개시 후로 나누어 첨가하므로서 $H_2O_2$의 분해효율 및 첨가량을 최소화하였다. 가열효과로서 분해반응 개시 전에 비교적 낮은 온도인 $50^{\circ}C$ 정도로 가열하면 반응유도시간이 5분 이내로 단축되었으며, 수지의 양을 5g 및 10g 으로 증가시킨 결과, $H_2O_2$의 첨가비율을 9-10배 정도로 증가시키면 완전분해가 가능하였다.

• Animal Bioscience
• /
• 제36권3호
• /
• pp.498-505
• /
• 2023

Objective: This study was conducted to determine the optimal dose of novel iron amino acid complexes (Fe-Lys-Glu) by measuring laying performance, egg quality, egg iron (Fe) concentrations, and blood biochemical parameters in laying hens. Methods: A total of 1,260 18-week-old healthy Beijing White laying hens were randomly divided into 7 groups with 12 replicates of 15 birds each. After a 2-wk acclimation to the basal diet, hens were fed diets supplemented with 0 (negative control, the analyzed innate iron content was 75.06 mg/kg), 15, 30, 45, 60, and 75 mg Fe/kg as Fe-Lys-Glu or 45 mg Fe/kg from FeSO₄ (positive control) for 24 wk. Results: Results showed that compared with the negative and positive control groups, dietary supplementation with 30 to 75 mg Fe/kg from Fe-Lys-Glu significantly (linear and quadratic, p<0.05) increased the laying rate (LR) and average daily egg weight (ADEW); hens administered 45 to 75 mg Fe/kg as Fe-Lys-Glu showed a remarkable (linear, p<0.05) decrease in feed conversion ratio. There were no significant differences among all groups in egg quality. The iron concentrations in egg yolk and serum were elevated by increasing Fe-Lys-Glu levels, and the highest iron content was found in 75 mg Fe/kg group. In addition, hens fed 45 mg Fe/kg from Fe-Lys-Glu had (linear and quadratic, p<0.05) higher yolk Fe contents than that with the same dosage of FeSO₄ supplementation. The red blood cell (RBC) count and hemoglobin content (linear and quadratic, p<0.05) increased obviously in the groups fed with 30 to 75 mg Fe/kg as Fe-Lys-Glu in comparison with the control group. Fe-Lys-Glu supplementation also (linear and quadratic, p<0.05) enhanced the activity of copper/zinc-superoxide dismutase (Cu/Zn-SOD) in serum, as a result, the serum malonaldehyde content (linear and quadratic, p<0.05) decreased in hens received 60 to 75 mg Fe/kg as Fe-Lys-Glu. Conclusion: Supplementation Fe-Lys-Glu in laying hens could substitute for FeSO₄ and the optimal additive levels of Fe-Lys-Glu are 45 mg Fe/kg in layers diets based on the quadratic regression analysis of LR, ADEW, RBC, and Cu/Zn-SOD.