• 한국대기환경학회지
• /
• 제15권1호
• /
• pp.23-32
• /
• 1999

Deposition is one of the important removal mechanisms for the ambient aerosol, and it also leads to adverse environmental and economic impacts. The purpose of this study was to investigate chemical compositions and spatial distributions of fall-out aerosols. A total number of 340 samples were collected at 35 sampling sites in Suwon area from January to November, 1996. Twelve inorganic elements (Al, Ba, Cd, Cr, K, Pb, Sb, Zn, Cu, Fe, Ni, and V) and eight ionic components ($F^-$, Cl, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $NH_4^+$, $Mg^{2+}$, and $Ca^{2+}$) were analyzed by AAS and IC, respectively. The monthly variation showed that the flux of fall-out particles was increased in the spring season(March, April, and May) and decreased from August to October. Arithmetic mean flux of fall-out particles was 176.8 kg/$ extrm{km}^2$/day during the study period. The fluxes of each chemical species were $SO_4^{2-}$ 12.414, $Ca^{2+}$ 7.369, $NO_3^-$ 5.812, $Cl^-$ 3.566, $NH_4^+$ 3.176, Fe 3.107 kg/$\textrm{km}^2$/day, and so on. By using a kriging analysis, spatial distribution pattern of those fluxes was intensively studied. Total fluxes estimated in Suwon city were 8424.72t/y of fall-out particles, 519.27t/y of $SO_4^{2-}$, 336.79t/y of $Ca^{2+}$,267.34 t/y of $NO_3^+$, 155.36t/y of $Cl^-$, 147.79t/y of Fe.

• Journal of Plant Biology
• /
• 제29권3호
• /
• pp.197-205
• /
• 1986

Leaf mesophyll protoplasts from five cultivars of tobacco (N. tabacum L.) were cultured. The protoplasts did not survive in culture medium containing Murashige and Skoog inorganic salts for over 6 days. NH4NO3 and FeSO4.Na2EDTA concentration of Murashige and Skoog medium were toxic in tobacco leaf mesophyll protoplast culture. Therefore we investigated optimum condition in Murashige and Skoog medium. High plating efficiency was obtained by reducing the concentrations of NH4NO3 and FeSO4.Na2EDTA to 1/3 and 1/10, respectively, on the supplemented with 5$\mu$M IAA, 0.5 $\mu$M 2.4-D 5 $\mu$M BAP. Plants were regenerated from protoplast-derived calluses.

• 한국대기환경학회지
• /
• 제3권2호
• /
• pp.18-26
• /
• 1987

In order to investigate the character of air pollution by heavy metals and to elucidate the possible sources in Seoul city, this study was performed to measure the concentrations of heavy metals of total suspended particulate and air pollutants such as $SO_2, NO_2, CO, CH_4$, Non-methane hydrocarbon, ozone at the residential-traffic area (shinchon dong) in January and February, 1986. The results are as follows: 1. $SO_2$ and TSP concentration were 135ppb and 167 $\mug/m^3$ in average, respectively. 2. While concentrations of heavy metals such as Fe, Cu, Pb in the ambient air seems gradually decreasing annually, Ni compound has been shown the tendency of increasing. 3. Among heavy metals in TSP analysed, the iron was detected at the highest level, 0.905% and the cadimium was the lowest 0.004% in average, respectively. 4. V, Fe and Zn compounds in air were observed to be highly correlated with their correlation coefficients(r) higher than 0.7. Pb compound was highly correlated to the levels of Zn and Fe, however relatively less correlated to V compound. 5. Among concentrations of heavy metals in the particulates, V and Ni compounds were highly correlated with coefficient(r) of 0.8587; the cause might be imagined by the fact of releasing from combustion of fuel oil. Fe, Pb and Zn compounds were highly correlated $SO_2$ concentration. It might be explained that they were released by combustion of coal. 6. The level of $SO_2$ was highly correlated to most of heavy metals: especially correlation coefficient(r) to Pb compound was 0.9081. Pb compound was also highly correlated to NO, CO and TSP. TSP showed higher correlation to Pb and Cd compounds than to V and Ni compounds. It might be assumed that particulate was mainly produced by combusting coal from space heating and by exhausting gasoline and diesel oil from transportation rather than by burning fuel oil.

• 에너지공학
• /
• 제23권1호
• /
• pp.58-66
• /
• 2014

저등급탄인 내몽골 갈탄의 촉매가스화반응을 수행하였다. 가스화반응은 열중량분석기(TGA)에서 반응온도 $600{\sim}900^{\circ}C$ 범위에서 이산화탄소를 반응가스로 하여 실행하였다. 공정설계에 필수적인 반응 인자들을 도출하기 위하여 세가지의 기-고체 반응모델을 사용하였으며 그 모델들이 가스화반응의 거동을 예측하는 능력을 비교하였다. 사용된 모델 중에서 modified volumetric reaction model이 촉매, 비촉매 가스화반응의 거동을 가장 잘 묘사하였다. 이론적 모델인 homogeneous model과 shrinking-core model은 비촉매반응과 $FeSO_4$를 촉매로 한 반응을 비교적 잘 표현하였다. 알칼리금속 촉매를 사용할 경우, 촉매의 활성은 $600^{\circ}C$ 낮은 온도에서 가장 크게 나타났으며 온도가 $700^{\circ}C$로 증가하면 촉매활성이 약 50% 감소하는 것이 관찰되었다. 온도가 더 증가하여 $800^{\circ}C$ 이상에서는 촉매활성은 일정해졌다. 본 연구에서 촉매의 활성 순서는 다음과 같이 얻어졌다: $K_2CO_3$ > $Na_2CO_3$ > $K_2SO_4$ > $FeSO_4$.

• Journal of Electrochemical Science and Technology
• /
• 제3권3호
• /
• pp.135-142
• /
• 2012

Over the past few years, $LiFePO_4$ has been actively studied as a cathode material for lithium-ion batteries because of its advantageous properties such as high theoretical capacity, good cycle life, and high thermal stability. However, it does not have a very good power capability owing to the low lithium-ion diffusivity and poor electronic conductivity. Reduction in particle size of $LiFePO_4$ to the scale of nanometers has been found to dramatically enhance the above properties, according to many earlier reports. However, because of the intrinsically low tap density of nanomaterials, it is difficult to commercialize this method. Many studies are being carried out to improve the volumetric energy density of this material and many methods have been reported so far. This paper provides a brief summary of the synthesis methods and electrochemical performances of micro-spherical $LiFePO_4$ having high volumetric energy density.

• 한국수소및신에너지학회논문집
• /
• 제10권3호
• /
• pp.185-189
• /
• 1999

Effects of alloy modification with the $Zr_{0.6}Ti_{0.4}V_{0.4}Ni_{1.2}Mn_{0.4}$ alloy for an electrode use have been investigated. For the alloy composition, a part of Mn was substituted by Co, Cr and Fe. The experimental results showed that Co accelerated activation of alloy, and Fe and Cr improved the discharge capacity. These results agree with P-C-T curves of each alloy. But substituting Fe for Mn showed the decrease of the discharge capacity when discharged at high rate (60mA, about 1C rate). Considering both the discharge capacity and the high rate discharge property, $Zr_{0.6}Ti_{0.4}V_{0.4}Ni_{1.2}Mn_{0.3}Cr_{0.1}$ alloy was found to be the best alloy among the alloys subjected to the test.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.543-548
• /
• 1995

Li-ferrite powders were prepared from mixture of Fe and Li salts using a hydrothermal method. Their crystal structure, microstructure and magnetic property were investigated with X-ray diffraction analysis, chemical analysis, SEM, and VSM. In the case of using FeCl3 as a precursor, Li-ferrite powders were synthesized. However, Fe3O4 was formed when the precursor was a divalented Fe2SO4 or FeCl2. The precipitation rate of Li-ferrite was increased as the reaction temperature increased. The optimum conditions of synthesis were the mole ratio of Fe+++/Li+=2, pH 13, the reaction temperature of 25$0^{\circ}C$ and the reaction time of 120min. With this condition, the spherical particles with good dispersion were obtained with average particle size of 0.4${\mu}{\textrm}{m}$ and saturation magnetization of 65 emu/g.

• Journal of Nutrition and Health
• /
• 제17권1호
• /
• pp.31-40
• /
• 1984

혐기적 조건밑에서 $FeCl_{3}$에 의해 촉진된 TBA 반응을 이용하여 혈청중 과산화물 측정을 위한 새로운미량 분석법을 설정하였다. 즉. 혈청단백침전물이 현탁된 TBA반응흔합액에 혈청 $10{\mu}l$당 $1.0{\mu}mole$의 $FeCl_{3}$를 첨가한 다음 질소기류밑에서 50분간 끊는 물에 중탕한다. 이 분석법의 반응 예민도는 현행 일반 TBA법보다 40여배나 증대되었으며 따라서 미량의 시료$(10{\sim}20{\mu}l)$로도 TBA반응생성물의 농도 측정이 비색법으로도 가능하였다. 그리고 TBA반응생성물의 butanol 추출액을 $(NH_{4})_{2}SO_{4}$염석으로 부분말수시킴으로써 예민성 및 재현성이 개선될 수 있었다. 이 분석법을 이용하여 측정한 건강인들의 혈청 TBA같은 높은 연령군일수록 증가하는 경향을 보였다.

• 한국미생물·생명공학회지
• /
• 제45권4호
• /
• pp.330-342
• /
• 2017

Statistical design of experiments was employed to optimize the media composition for the production of laccase from Bacillus sp. PK4. In order to find the key ingredients for the best yield of enzyme production from the selected eleven variables viz yeast extract, glucose, zinc sulphate, copper sulphate, potassium chloride, magnesium sulphate, calcium chloride, ferrous sulphate, sodium chloride, potassium dihydrogen phosphate ($KH_2PO_4$) and dipotassium hydrogen phosphate ($K_2HPO_4$), Plackett-Burman design was applied. The $MgSO_4$, $FeSO_4$, and $CuSO_4$ showed positive estimate, and their concentration optimized further. The steepest ascent method and Box-Behnken method revealed that 1.5 mM $MgSO_4$, 0.33 g/l $FeSO_4$ and 1.41 mM $CuSO_4$ were optimal for the laccase production by Bacillus sp. PK4. This optimization strategy leads to enhancement of laccase production from 2.13 U/ml to 40.79 U/ml. Agro-wastes residues replace the carbon source glucose in the optimized media namely sugarcane bagasse, wheat bran, rice husk, and groundnut shell, among these groundnut shells (117 U/ml) was found to enhance the laccase production significantly. The laccase produced by Bacillus sp. PK4 was found to have the potential to degrade persistent organic pollutant benzo[a]pyrene.

• 대한환경공학회지
• /
• 제33권6호
• /
• pp.426-431
• /
• 2011

본 연구의 목적은 마그네슘-철 층상이중수산화물(Mg-Fe LDH)을 이용하여 인공 지하수에서 바이러스를 제거하는 것이다. Mg-Fe LDH를 이용한 박테리오파지 T7의 제거를 관찰하기 위하여 다양한 실험조건에서 회분실험을 실시하였다. 실험 결과, Mg-Fe LDH에 의한 T7 제거는 빠른 반응으로써, 2~3시간 안에 평형에 도달하였다. Mg-Fe LDH의 T7 제거능은 $1.57{\times}10^8pfu/g$이었고, 제거율은 96%이었다. 또한, pH 6.2~9.1 범위에서 용액 pH가 T7 제거에 미치는 영향은 미미하였다. 음이온들($SO_4^{2-}$, $CO_3^{2-}$, $HPO_4^{2-}$)이 T7 제거에 미치는 영향은 중요하였는데, 이유는 이들 음이온들이 LDH상의 흡착지점에 T7과 경쟁하기 때문이다. 반면, 질산염($NO_3^-$)이 T7 제거에 미치는 영향은 미미하였다. 본 연구에 의하면, Mg-Fe LDH는 흡착제로써 수처리 과정에서 바이러스제거에 적용될 수 있을 것으로 판단된다.