• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.629-641
• /
• 2022

This research was conducted to secure fundamental data for development of a recirculating hydroponic system. To achieve this, Lycopersicum esculentum var. 'Dafnis' and 'TY Tiny' were grown with Yamazaki hydroponic solution and the inorganic element concentrations of plant leaves and nutrient solution of supplied and drained were analyzed periodically. The T-N and P contents in both varieties of tomato leaves showed gradual decreasing tendencies with the passage of time. The 'TY Tiny' tomato had higher contents of those two nutrients than 'Dafnis' tomato in the late stage. The K content of 'Dafnis' tomato was high in the early growth stage, but low in the late stage. However, that of 'TY Tiny' tomatoes rose in the late stage. The Ca content gradually increased in both varieties of tomato in the latter stages. The EC of the drained nutrient solution in both varieties of tomato showed increasing tendencies as time had passed, but the pH was get lowered in the drained solution. The concentrations of NO₃-N, K, Ca, Mg, Na, Fe, and B, except PO₄-P in the drained nutrient solution were generally higher than those in the supplied solution, especially in the period of October through December. The above results can be used for controlling of nutrient concentrations in the recirculated hydroponic cultivation of tomato.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.85-95
• /
• 2023

In recent years, solid-state Li metal batteries (SSLBs) have attracted significant attention as the next-generation batteries with high energy and power densities. However, uncontrolled dendrite growth and the resulting pulverization of Li during repeated plating/stripping processes must be addressed for practical applications. Herein, we report a plastic-crystal-based polymer/ceramic composite solid electrolyte (PCCE) to resolve these issues. To fabricate the one-side ceramic-incorporated PCCE (CI-PCCE) film, a mixed precursor solution comprising plastic-crystal-based polymer (succinonitrile, SN) with garnet-structured ceramic (Li₇La₃Zr₂O₁₂, LLZO) particles was infused into a thin cellulose membrane, which was used as a mechanical framework, and subsequently solidified by using UV-irradiation. The CI-PCCE exhibited good flexibility and a high room-temperature ionic conductivity of over 10^-3 S cm^-1. The Li symmetric cell assembled with CI-PCCE provided enhanced durability against Li dendrite penetration through the solid electrolyte (SE) layer than those with LLZO-free PCCEs and exhibited long-term cycling stability (over 200 h) for Li plating/stripping. The enhanced Li⁺ transference number and lower interfacial resistance of CI-PCCE indicate that the ceramic-polymer composite layer in contact with the Li anode enabled the uniform distribution of Li⁺ flux at the interface between the Li metal and CI-PCCE, thereby promoting uniform Li plating/stripping. Consequently, the Li//LiFePO₄ (LFP) full cell constructed with CI-PCCE demonstrated superior rate capability (~120 mAh g^-1 at 2 C) and stable cycle performance (80% after 100 cycles) than those with ceramic-free PCCE.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.139-147
• /
• 2021

Livestock manure is used as an organic fertilizer to replace chemical fertilizers after sufficient fermentation in an aerobic bioreactor. On the other hand, liquid manure disposal problems occur repeatedly because soil spraying is restricted during the summer when the crops are growing. To use liquid fertilizer (LF) as an additional nutrient source for crops, it is necessary to reduce the amount of suspended solids (SS) in the liquid fertilizer and secure stability problems against pathogenic microorganisms. This study examined the effects of the simultaneous SS removal and E.coli sterilization in the LF using the microbubble (MB) generator (FeMgO catalyst insertion). The remaining SS were further removed using the integrated microbubble and microfilter system. During the floating process in the MB device, the SS were removed by 57.9%, and the coliform group was not detected (16,200→0 MPN/100 mL). By optimizing the HRT of the integrated system, the removal efficiency of the SS was improved by 92.9% under the 0.1h of HRT condition. After checking the properties of the treated LF, 64.5%, 70.1%, 54.9%, and 51.5% of the TCOD, SCOD, PO4-P, and TN, respectively, were removed. The treated effluent from such an integrated system has a lower SS content than that of the existing LF and does not contain coliforms; therefore, it can be used directly as an additional fertilizer.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.758-766
• /
• 2015

Dextran is a generic term for a bacterial exopolysaccharide synthesized from sucrose and composed of chains of D-glucose units connected by ${\alpha}$-1,6-linkages by using dextransucrases. Dextran could be used as vicosifying, stabilizing, emulsifying, gelling, bulking, dietary fiber, prebiotics, and water holding agents. We isolated new strain capable of producing dextran from Korean traditional kimchi and identified as Leuconostoc sp. strain JYY4. Batch fermentation was conducted in bioreactor with a working volume of 3 L. The media was MMY and 15% (w/v) sucrose. Mineral medium consisted of $3.0g\;KH_2PO_4$, $0.01g\;FeSO_4$, $H_2O$, $0.01g\;MnSO_4$, $4H_2O$, $0.2g\;MgSO_4\;7H_2O$, 0.01 g NaCl, $0.05g\;CaCl_2$ per 1 liter deionized water. The pH of media was initially adjusted to 6.0. The inoculation rate was 1.0% (v/v) of the working volume. Temperature was maintained at $28^{\circ}C$. The agitation rate was 100 rpm. The production pattern of dextran was associated with the cell growth. After 24 hr dextran reached its highest concentration of 59.4 g/L. The sucrose was consumed completely after 40 hr. Growth reached stationery phase when sucrose became limiting, regardless of the presence of fructose or mannitol. When the specific growth rate was 0.54 hr-1, utilization averaged 5.8 g/L-hr. The yield and productivity of dextran were 80% and 2.0 g/L-hr, respectively. Dextrans produced by were separated to two different size by an alcohol fraction method. The size of high molecular weight dextran (45% alcohol, v/v), less soluble dextran, was between MW 500,000 and 2,000,000. Soluble dextran (55% alcohol, v/v) was between 70,000 and 150,000. The molecular weight average of total dextran (70% alcohol, v/v) was between 150,000 to 500,000. The enzymatic hydrolyzates of total dextran of ATCC 13146 showed branched dextrans by Penicillium dextranase contained of glucose, isomaltose, isomaltotriose, and isomaltooligosaccharides greater than DP4 (degree of polymerization) that had branch points. Compounds greater than DP4 were branched isomaltooligosaacharides. Hydrolysates by the Lipomyces dextranase produced the same composition of oligosaccharides as those by Penicillin dextranase.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.227-234
• /
• 2014

Purpose: The aim of this research was to develop and evaluate natural hydroxyapatite (HA) ceramics produced from the heat treatment of pig bones. Methods: The properties of natural HA ceramics produced from pig bones were assessed in two parts. Firstly, the raw materials were characterized. A temperature of $1,200^{\circ}C$ was chosen as the calcination temperature. Fine bone powders (BPs) were produced via calcinations and a milling process. Sintered BPs were then characterized using field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, and a 2-year in vitro degradability test. Secondly, an indirect cytotoxicity test was conducted on human osteoblast-like cells, MG63, treated with the BPs. Results: The average particle size of the BPs was $20{\pm}5{\mu}m$. FE-SEM showed a non-uniform distribution of the particle size. The phase obtained from XRD analysis confirmed the structure of HA. Elemental analysis using XRF detected phosphorus (P) and calcium (Ca) with the Ca/P ratio of 1.6. Functional groups examined by FTIR detected phosphate ($PO{_4}^{3-}$), hydroxyl ($OH^-$), and carbonate ($CO{_3}^{2-}$). The EDX, XRF, and FTIR analysis of BPs indicated the absence of organic compounds, which were completely removed after annealing at $1,200^{\circ}C$. The BPs were mostly stable in a simulated body fluid (SBF) solution for 2 years. An indirect cytotoxicity test on natural HA ceramics showed no threat to the cells. Conclusions: In conclusion, the sintering temperature of $1,200^{\circ}C$ affected the microstructure, phase, and biological characteristics of natural HA ceramics consisting of calcium phosphate. The Ca-P-based natural ceramics are bioactive materials with good biocompatibility; our results indicate that the prepared HA ceramics have great potential for agricultural and biological applications.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.75-75
• /
• 2018

Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.1
• /
• pp.25-32
• /
• 1998

To characterize the growth environment, inorganic composition and morphological chracteristics of leaves of Korean tea plant, soil and tea leaf samples were collected from 15 locations and analyzed. The chemical characteristics of soils were in range of pH 4.09~6.15, OM 23.9~72.6g/kg, available phosphate less than 300mg/kg, K $0.8{\sim}2.5cmol^+/kg$, Na $tr{\sim}0.17cmol^+/kg$, Ca $1.0{\sim}6.2cmol^+/kg$, and Mg $0.3{\sim}2.1cmol^+/kg$. The contents of Ni. Cr, Zn. Cu, Pb, and Cd were at the level less than natural content in upland soil. Most of the sample soils were sandy loamy and loamy texture. The native tea plants were mainly grown in bamboo thicket or in forest. The leaf sizes of tea plants were $6.85{\pm}1.75{\times}2.6{\pm}0.5cm$, lateral vein number $14.2{\pm}2.7$, and crenated number $58.5{\pm}11.2$, and the leaf color was thin to dark green. The contents of $NH_4{^+}$, $Na^+$, $K^+$, $Mg^{2+}$ and $Ca^{2+}$ in tea leaves were in range of 30.5~47.7, 45.5~164.5, 16,998~25,431, 1.590~2,392 and 1,085~1,958mg/kg, respectively. The contents of $F^-$, $Cl^-$, $NO_3{^-}$, $PO_4{^{3-}}$ and $SO_4{^{2-}}$ were in range of 21.2~63.2, 126.4~257.9, 108.5~185.9, 1,270~1.819, and $954{\sim}1,670mg/kg$, respectively. The leaf size of native tea plant grown widlly in Shunchun Changchun-ri, Hwasun Ssangbongsa, Kuryoi Chonunsa, Bosong Daewonsa and Namhae Boriam was as large as those of Yabukita. Japan cultiver, grown at Kangjin Jangwon tea field.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.369-372
• /
• 1998

Microbial insecticide formulations were prepared by liquid and semi-solid fermentations using Bacillus thuringiensis subsp. kurstaki, HL-106 (BTK-HL106), B. thuringiensis subsp. israelensis HL-63 (BTI-HL63) and B. sphaericus 1593 (BS-1593) strains. The liquid fermentation medium contained molasses 2%, dextrose 1.5%, peptone 2%, D-xylose 0.025%, CaCl$_2$ 0.1%, K$_2$HPO$_4$ 0.1%, KH$_2$PO$_4$ 0.1%, MgSO$_4$$.$7H$_2$O 0.03%, FeSO$_4$$.$7H$_2$O 0.002%, ZnSO$_4$$.$7H$_2$O 0.02%. The composition of the semi-solid fermentation medium was rice bran 45.2%, zeolite 31%, yeast powder 0.02%, corn powder 5%, dextrose 3%, lime 0.3%, NaCl 0.06%, CaCl$_2$ 0.02%, and H$_2$O 15.42%. Insecticide formulations produced in the liquid fermentation named BTK-HL106, BTI-HL63 and BS-1593 pesticides and those in the semi-solid fermentation were designated as BTK-HL106-1, BTI-HL63-1 and BS-1593-1 pesticides, respectively. The number of spore (endotoxin crystals) was 2.65${\times}$10$\^$9/ spores per $m\ell$ in the BTK-HL106 and 3.5${\times}$10$\^$10/ in the BTK-HL106-1 3.8${\times}$10$\^$9/ spores in the BTI-HL63 and 7.0${\times}$10$\^$10/ in the BTI-HL63-1, and 7.5${\times}$10$\^$9/ in the BS-1593 and 1.4${\times}$10$\^$10/ in the BS-1593-1. The spores in the BS-1593 formulation was produced two times more than the other formulations. The spores in the BTI-HL63-1 were contained twice than those in the BTK-HL106-1, and five times than those in the BS-1593-1. The results indicated that spore (endotoxin crystals) productions in the semi-solid fermentation increased about ten times than those in the liquid fermentations. $LC_{50}$s of the BTI-HL63 and BS-1593 were 4.5 $\mu\textrm{g}$, and those of the BTI-HL63-1 and BS-1593-1 were 1.5 $\mu\textrm{g}$. $LC_{50}$ of the BTK-HL106 was 1.5 mg and that of the BTK-HL106-1 was 0.9 mg. The $LC_{50}$s of the formulations in the semi-solid fermentations showed about two to three times higher than those in the liquid fermentations.

• Microbiology and Biotechnology Letters
• /
• v.10 no.1
• /
• pp.15-26
• /
• 1982

A potential fungal lipid producer from starch, which was identified as Muror plumbeus, was isolated from natural sources and its optimum cultivation condition for lipid production was investigated. The Mucor plumbeus FRI 0007 showed the highest felt weight and lipid content which were 2.09 $\pm$ 0.24g per 50$m\ell$ of medium and 37.43% on dry weight basis respectively after 20 days incubation on the medium containing 21% of starch as a carbon source. The urea was the best nitrogen source as compared with sodium nitrate, potassium nitrate, magnesium nitrate, ammonium nitrate and ammonium acetate and its optimum concentration was 2.14g/$\ell$, showing 2.39 $\pm$ 0.07 g felt/50$m\ell$ of medium and 50.73% lipid content on dry weight basis after 25 days incubation. Besides the starch as a carbon source and urea as a nitrogen source, the Mucor plumbeus FRI 0007 utilized ZnSO$_4$, MgSO$_4$, NaH$_2$PO$_4$, $K_2$SO$_4$and FeCl$_3$as mineral sources. However, it did not require ail the above 5 minerals in group in-dispensably for its growth and lipid accumulation. The lipid and economic coefficient of Mucor plumbeus FRI 0007 grown on the medium containing 0.44g $K_2$SO$_4$or 5.00g MgSO$_4$/$\ell$solely were 14.96 and 15.37 and 31.12 and 26.10 which was higher than those on the medium containing the above 5 minerals.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1180-1185
• /
• 2006

Lab-scale batch experiments using several 25-L transparent acrylic reactors were conducted to develop optimum capping materials that can reduce phosphorus released from polluted sediments. The sediment used in the experiment was very fine clay(8.8 $\Phi$ in mean grain size), and organic carbon($C_{org}$) content was as high as 2%. Four kinds of batches with different capping materials Brucite($Mg(OH)_2$), Sea sand($SiO_2$), Granular-gypsum($CaSO_4{\cdot}2H_2O$), Double layer(brucite+sand), and one control batch were operated for 30 days. Phosphorus fluxes released from bottom sediments in the control batch were estimated to be 14.6 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, while 9.5 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, 5.2 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, 4.2 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, and 3.1 $mg{\cdot}m^{-2}{\cdot}d^{-1}$ in the batch capped with Sea sand, Granular-gypsum, Double layer, and Brucite, respectively. The results obtained from lab-scale batch experiments show that there were 70% reduction of phosphorus for some materials such as Brucite, Double layer(brucite+sand), and whereas sea sand only about 35%. The pH range of surface sediment to which Brucite was applied showed about $8.0{\sim}9.5$ in the weak alkaline state. This effect can prevent liberation of $H_2O$. The addition of gypsum into the sediment can reduce the progress of methanogenesis because of fast early diagenesis and sufficient supply of $SO_4^{2-}$ to the sediments, stimulate the SRB highly. Therefore, the application of Brucite and Gypsum can reduce phosphorus release from the sediment as a result of formation of $Mg_5(OH)(PO_4)_3$, pyrite($FeS_x$), and apatite-mineral.