• 한국자기학회지
• /
• 제3권4호
• /
• pp.289-292
• /
• 1993

3-Gun 고주파 마그네트론 스퍼터링법에 의해 [Ni/Fe/Cu] 다층박막과 [Fe/Ni/Fe/Cu] 다층 박막을 제조하고 Ni/Fe 두께비에 따른 자기저항특성을 조사하였다. 열처리에 의한 효과를 고나찰하기 위하여 진공열처리를 행하였다. 두 종류의 다층박막에서 사잇층 Cu 두께에 따른 자기저항의 진동 현 상을 관찰할 수 있었다. Ni과 Cu의 계면에 삼입된 Fe 두께가 약 $3\;\AA$일때 자기저항이 극대값을 보 였으며, Fe 두께가 $1~2\;\AA$일때 자기저항은 이에 비해 크게 감소하지 않았으나, 포화자장은 현저 히 감소하는 것으로 나타났다. ${[Fe(1\;\AA)/Ni(18\;\AA)/Fe(1\;\AA)/Cu(23\;\AA)]}_{20}Fe(80\;\AA)/Si$ 시편의 경우, 100 Oe의 포화자장에서 6%의 자기저항을 얻을 수 있었다. 열처리에 의해서는 자기저항이나 큰 변화를 관찰할 수 없었으며, 합금상 형성 여부는 확인할 수 없었다.

• Bulletin of the Korean Chemical Society
• /
• 제19권6호
• /
• pp.654-660
• /
• 1998

$[Fe^{II}Fe^{III}BPLMP(OAc)_2](BPh_4)_2$ (1), a new model for the reduced form of the purple acid phosphatases, has been synthesized by using a dinucleating ligand, 2,6-bis[((2-pyridylmethyl)(6-methyl-2-pyridylmethyl)amino) methyl]-4-methylphenol (HBPLMP). Complex I has been characterized by X-ray diffraction method as having (μ-phenoxo)bis(acetato)diiron core. Complex 1 was crystallized in the monoclinic space group C2/c with the following cell parameters: a=41.620(6) Å, b=14.020(3) Å, c=27.007(4) Å, β=90.60(2)°, and Z=8. The iron centers in the complex 1 are ordered as indicated by the difference in the Fe-O bond lengths which match well with typical $Fe^{III}-O\; and\; Fe^{II}-O$ bond lengths. Complex 1 has been studied by electronic spectral, NMR, EPR, SQUID, and electochemical methods. Complex 1 exhibits strong bands at 592 nm, 1380 nm in $CH_3CN$ (ε = 1.0 × 103 , 3.0 × 102). These are assigned to $phenolate-to-Fe^{III}$ and intervalence charge-transfer transitions, respectively. Its NMR spectrum exhibits sharp isotropically shifted resonances, which number half of those expected for a valence-trapped species, indicating that electron transfer between $Fe^{II}\;and\;Fe^{III}$ centers is faster than NMR time scale. This complex undergoes quasireversible one-electron redox processes. The $Fe^{III}_2/Fe^{II}Fe^{III}\;and\;Fe^{II}Fe^{III}/Fe^{II}_2$ redox couples are at 0.655 and -0.085 V vs SCE, respectively. It has $K_{comp}=3.3{\times}10^{12}$ representing that BPLMP/bis(acetate) ligand combination stabilizes a mixed-valence $Fe^{II}Fe^{III}$ complex in the air. Complex 1 exhibits a broad EPR signal centered near g=1.55 which is a characteristic feature of the antiferromagnetically coupled high-spin $Fe^{II}Fe^{III}$ system $(S_{total}=1/2)$. This is consistent with the magnetic susceptibility study showing the weak antiferromagnetic coupling $(J= - 4.6\;cm^{-1},\; H= - 2JS_1{\cdot}S2)$ between $Fe^{II}\; and \;Fe^{III}$center.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.422-432
• /
• 2002

Mechanically driven decomposition of intermetallics during mechanical milling(MM 1 was investigated. This process for Fe-Ce and Fe-Sn system was studied using conventional XRD, DSC, magnetization and alternative current susceptibility measurements. Mechanical alloying and milling form products of the following composition (in sequence of increasing Gecontent): $\alpha$(${\alpha}_1$) bcc solid solution, $\alpha$+$\beta$-phase ($Fe_{2-x}Ge$), $\beta$-phase, $\beta$+FeGe(B20), FeGE(B20), FeGe(B20)+$FeGe_2$,$FeGe_2$,$FeGe_2$+Ge, Ge. Incongruently melting intermetallics $Fe_6Ge_5$ and $Fe_2Ge_3$ decompose under milling. $Fe_6Ge_5$ produces mixture of $\hat{a}$-phase and FeGe(B20), $Fe_2Ge_3$ produces mixture of FeGe(B20) and $FeGe_2$ phases. These facts are in good agreement with the model that implies local melting as a mechanism of new phase for-mation during medchanical alloying. Stability of FeGe(B20) phase, which is also incongruently melting compound, is explained as a result of highest density of this phase in Fe-Ge system. Under mechanical milling (MM) in planetary ball mill, FeSn intermetallic decomposes with formation $Fe_5Sn_3$ and $FeSn_2$ phases, which have the biggest density among the phases of Fe-Sn system. If decomposition degree of FeSn is relatively small(<60%), milled powder shows superparamagnetic behavior at room temperature. For this case, magnetization curves can be fitted by superposition of two Langevin functions. particle sizes for ferromagnetic $Fe_5Sn_3$ phase determined from fitting parameters are in good agreement with crystalline sizes determined from XRD data and remiain approximately chageless during MM. The decomposition of FeSn is attributed to the effects of local temperature and local pressure produced by ball collisions.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.942-948
• /
• 1992

Ultrafine iron oxide powder, {{{{ gamma }}-Fe2O3 and $\alpha$-Fe2O3, were prepared by the thermal decomposition of organometallic compounds. The formation process of powder includes the thermal decomposition and oxidation of the organometallic precursors, Fe(N2H3COO)2(N2H4)2 (A) and N2H5Fe(N2H3COO)3.H2O (B). The organometallic precursors, A and B, were synthesized by the reaction of ferrous ion with hydrazinocarboxylic acid, and characterized by quantitative analysis and infrared spectroscopy. The mechanistic study for the thermal decomposition was performed by DAT-TG. The iron oxide powder was obtained by the heat treatment of the precursors at 20$0^{\circ}C$ and $600^{\circ}C$ for half an hour in air. The phases of the resulting product were proved {{{{ gamma }}-Fe2O3 and $\alpha$-Fe2O3 respectively. The particle shape was equiaxial and the particle size was less than 0.1 ${\mu}{\textrm}{m}$. Magnetic properties of the {{{{ gamma }}-Fe2O3 powder obtained from A and B was 234 Oe of coercivity, 64.26 emu/g of saturation magnetization, 23.59 emu/g of remanent magnetization and 24.1 Oe, 47.27 emu/g, 3.118 emu/g respectively. The value of $\alpha$-Fe2O3 powder was 1.494 Oe, 0.4862 emu/g, 0.1832 emu/g and 1,276 Oe, 0.4854 emu/g, 0.1856 emu/g respectively.

• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.124-131
• /
• 2007

Methane is partially oxidized to produce the syngas by the lattice oxygen of metal oxides in the absence of gaseous oxygen. The present work deals with ferrite including copper component, which does not chemisorb methane, to investigate the suppression of the carbon deposition during the reduction of metal oxides by methane. Iron-based oxides of $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0) was synthesized by the co-precipitation method. Thermogravimetric Analysis(TGA) was used to observe the isothermal reduction behavior of $Cu_xFe_{3-x}O_4$ and $Fe_3O_4$ at $600-900^{\circ}C$ under methane atmosphere. The crystal structures of reduced specimens were characterized by X-rays powder diffraction(XRD) technique. From the analyses of TGA, it is concluded that the reduction kinetics of $CuFe_2O_4$ was the fastest among $Fe_3O_4$ and $Cu_xFe_{3-x}O_4$(X=0.25, 0.5, 1.0). The X-ray diffraction analyses indicated that $Cu_xFe_{3-x}O_4$ was decomposed to Cu and $Fe_3O_4$ phase at $600^{\circ}C$ and was reduced to Cu and Fe phase at $800^{\circ}C$. $Fe_3O_4$, which was reduced at $900^{\circ}C$, showed Fe, graphite and $Fe_3C$ phases. On the contrary, $Cu_xFe_{3-x}O_4$ does not show the graphite or $Fe_3C$ phases. This results infer that Cu component suppress the carbon deposition on Cu-ferrite.

• 폴리머
• /
• 제35권5호
• /
• pp.375-377
• /
• 2011

두 단계 스핀 코팅 방법을 사용하여 세라믹 체적 분율 0.10과 0.13의 $PbTiO_3$/P(VDF/TrFE) 0~3형 복합재료를 제작하고 분석하였다. 0~3형 $PbTiO_3$/P(VDF/TrFE) 복합재료를 SEM 전자현미경 사진으로 성공적으로 확인할 수 있었다. 이러한 전자현미경 사진을 통하여 복합재료의 0~3형 구조를 재확인하였다. 0~3형 $PbTiO_3$/P(VDF/TrFE) 복합재료는 P(VDF/TrFE) 공중합체보다 센서용 전기적 특성이 우수함을 나타내었다. 그러므로 이러한 낮은 유전상수와 높은 초전계수를 나타내는 0~3형 $PbTiO_3$/P(VDF/TrFE) 복합재료는 더 높은 성능을 나타낼 수 있는 새로운 초전형 센서 재료로 사용될 수 있다.

• 한국자기학회지
• /
• 제9권3호
• /
• pp.154-158
• /
• 1999

Nd 함유량을 2~6at.%로 변화시킨 $\alpha$-(Fe, Co)-B-Nb-Cu 초미세결정립합금의 미세조직 및 자기특성을 조사하였다. 급속응고된 Ndx(Fe0.9Co0.1)90-xB6Nb3Cu1(2$\leq$x$\leq$6, 1at.% 간격) 합금은 x=3 이상에서 비정질상으로 제조되었다. 제조된 비정질합금은 열처리에 의해 $\alpha$-(Fe, Co) 및 Nd2(Fe, Co)14B1상으로 구성된 초미세결정립합금으로 결정화 되었다. 최적열처리조건에서 잔류자화는 Nd의 증가에 따라 감소하며, x=3에서 1.55T로 최대 값을 나타내었다. 보자력은 Nd함유량 증가에 따라 직선적으로 증가하여 x=6에서 4.6kOe이었으며, 최대에너지적은 10.6MGOe였다.

• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.30-35
• /
• 1999

155$0^{\circ}C$~1$650^{\circ}C$의 온도범위에서 stampwo의 원료로서 사용되는 돌로마이트 클링커의 Fe2O3의 함유유무에 따른 slag에 의한 침식거동을 연구하였다. Slag 성분중에서 CaO-SiO2계 저융점 화합물 보다는 Fe2O3가 선택적으로 돌로마이트 클링커의 입계로 깊숙히 침투되었다. 돌로마이트 클링커의 가동면에 존재하는 치밀한 magnesioferrite는 slag중의 Fe2O3 성분보다는 클링커중에 함유되어 있는 Fe2O3 성분에 의하여 우선적으로 생성되었다. 돌로마이트 클링커의 slag에 의한 손상은 돌로마이트 클링커의 입계에 존재하는 CaO가 slag중의 Fe2O3 성분과 반응하여 dicaciumferrite를 생성$\longrightarrow$dicalciumferrite가 slag 성분중의 CaO-SiO2계 화합물에 의하여 용출되는 단계로 진행되었다. Slag의 온도가 상승됨에 따라 Fe2O3가 함유되어 있지 않는 돌로마이트 클링커의 경우에는 돌로마이트 클링커의 가동면에 생성되는 magnesioferrite의 층은 미양하였다. 반면에, Fe2O3가 함유된 돌로마이트 클링커는 slag의 온도가 상승됨에 따라 magnesioferrite의 층이 두꺼울 뿐문아니라 magnesioferrite의 입성장도 수반되었다.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.10-15
• /
• 2020

본 연구는 동일한 제조법을 가지는 연소촉매 FeOOH와 Fe₂O₃를 제조하여 고체추진제에 적용 후 기계적 물성 및 연소 특성의 변화에 관한 내용이다. 동일한 제조방법을 가지는 FeOOH와 Fe₂O₃를 만들기 위하여 FeOOH를 200, 300, 400, 500℃에서 2시간 동안 소성시킨 후 XRD 결과를 확인하였다. 또한, 제조된 촉매를 고체추진제에 적용 후 기계적 물성 및 연소 특성의 변화를 나타내었다. XRD 결과상으로 FeOOH는 200~300℃사이에서 Geothite에서 Hematite로 결정상이 변화하는 것을 확인하였다. 추진제의 응력은 연소촉매의 소성온도가 높아짐에 따라 변화가 거의 없지만 연신율은 소성을 진행한 촉매를 적용 시 증가하였다. 연소속도는 소성을 하지 않은 FeOOH가 다른 촉매에 비해 약 3~5% 빠르다는 것을 확인하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.584-584
• /
• 2000

Electronic structures of ordered Fe$_3X (X = Al, Si), and their derivative ternary alloys of Fe_2TX (T = 3d transition metal) have been investigated by using the linearized muffin-tin orbital (LMTO) band method. The role of the coupling between substituted transition metal and its neighbors is investigated by calculating the magnetic moments and local density of states (LDOS). It is shown that it is essential to include the coupling beyond nearest neighbors in obtaining the magnetic moment of Fe alloy. The preferential sites of T impurities in Fe_3X are determined from the total energy calculations. The derivative ternary alloys of Fe_2TX have characteristic electronic structures of semi-metal for Fe_2VAI and (nearly) half-metal for Fe_2TAI (T = Cr, Mn) and Fe_2TSi (T = V, Cr, Mn)