• 한국균학회지
• /
• 제19권3호
• /
• pp.220-225
• /
• 1991

1. 표고버섯 중 정제된 ATPase는 $Fe^{3+},\;Fe^{2+},\;Cd^{2+},\;Mg^{2+},\;K^{+}$ 및 $Co^{2+}$ 이온에 의하여 활성화 되었으나 $Zn^{2+},\;Ca^{2+},\;Cu^{2+}$ 및 $Ni^{2+}$ 이온에 의하여는 그 활성도가 억제되었다. 2. 5 mM $Fe^{3+}$, 10 mM $Fe^{2+}$, 1 mM $Cd^{2+}$, 5 mM $Mg^{2+}$, 5 mM $K^{+}$ 및 5 mM $Co^{2+}$이온은 이효소의 활성을 각각 130, 65, 65, 68, 105 및 23% 증가시켰다. 3.10 mM $Zn^{2+}$, 10 mM $Ca^{2+}$, 0.5 mM $Cu^{2+}$ 그리고 10 mM $Ni^{2+}$ 이온은 이효소의 활성을 각각 18, 19, 27% 그리고 30%의 억제효과를 보였다. 4. 10 mM ${Co_3}^{2-}$, 20 mM $CN^{-}$, 20 mM ${CH_3COO}^{-}$ 그리고 20 mM ${NO_3}^{-}$의 음이온은 이효소의 활성을각각 98, 95, 70% 그리고 50%를 억제시켰으나,${SO_4}^{2-}$ 이온은 농도증가에 따라 활성화 되었고, 20 mM 용액에서 21%로 활성도 증가의 최대치를 보였다.

• 한국분말재료학회지
• /
• 제13권4호
• /
• pp.285-289
• /
• 2006

Co-Fe-Ni-B-Si-Cr based amorphous strips containing nitrogen were manufactured via melt spinning, and then devitrified by crystallization treatment at the various annealing temperatures of $300^{\circ}C{\sim}540^{\circ}C$ for up to 30 minutes in an inert gas $(N_2)$ atmosphere. The microstructures were examined by using XRD and TEM and the magnetic properties were measured by using VSM and B-H meter. Among the alloys, the amorphous ribbons of $Co_{72.6}Fe_{9.8}Ni_{5.5}B_{2.4}Si_{7.1}Cr_{2.6}$ containing 121 ppm of nitrogen showed relatively high saturation magnetization. The alloy ribbons crystallized at $540^{\circ}C$ showed that the grain size of $Co_{72.6}Fe_{9.8}Ni_{5.5}B_{2.4}Si_{7.1}Cr_{2.6}$ alloy containing 121 ppm of nitrogen was about f nm, which exhibited paramagnetic behavior. The formation of nano-grain structure was attributed to the finely dispersed Fe4N particles and the solid-solutionized nitrogen atoms in the matrix. Accordingly, it can be concluded that the nano-grain structure of 5nm in size could reduce the core loss within the normally applied magnetic field of 300A/m at 10kHz.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3712-3719
• /
• 2011

Confined Pt and $CoFe_2O_4$ nanoparticles (NPs) in a mesoporous core/shell silica microsphere, Pt-$CoFe_2O_4$@meso-$SiO_2$, were prepared using a bi-functional linker molecule. A large number of Pt NPs in Pt-$CoFe_2O_4$@meso-$SiO_2$, ranging from 5 to 8 nm, are embedded into the shell and some of them are in close contact with $CoFe_2O_4$ NPs. The hydrogenation of cyclohexene over the Pt-$CoFe_2O_4$@meso-$SiO_2$ microsphere at $25^{\circ}C$ and 1 atm of $H_2$ yields cyclohexane as a major product. In addition, it gives oxygenated products. Control experiments with $^{18}O$-labelled water and acetone suggest that surface-bound oxygen atoms in $CoFe_2O_4$ are associated with the formation of the oxygenated products. This oxidation reaction is operative only if $CoFe_2O_4$ and Pt NPs are in close contact. The Pt-$CoFe_2O_4$@meso-$SiO_2$ catalyst is separated simply by a magnet, which can be re-used without affecting the catalytic efficiency.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2207-2219
• /
• 2018

Activated carbon (AC) was synthesized from Phoenix dactylifera stones and then modified by $CoFe_2O_4$ magnetic nanocomposite for use as a Cr(VI) adsorbent. Both $AC/CoFe_2O_4$ composite and AC were fully characterized by FTIR, SEM, XRD, TEM, TGA, and VSM techniques. Based on the surface analyses, the addition of $CoFe_2O_4$ nanoparticles had a significant effect on the thermal stability and crystalline structure of AC. Factors affecting chromium removal efficiency like pH, dosage, contact time, temperature, and initial Cr(VI) concentration were investigated. The best pH was found 2 and 3 for Cr adsorption by AC and $AC/CoFe_2O_4$ composite, respectively. The presence of ion sulfate had a greater effect on the chromium sorption efficiency than nitrate and chlorine ions. The results illustrated that both adsorbents can be used up to seven times to adsorb chromium. The adsorption process was examined by three isothermal models, and Freundlich was chosen as the best one. The experimental data were well fitted by pseudo-second-order kinetic model. The half-life ($t_{1/2}$) of hexavalent chromium using AC and $AC/CoFe_2O_4$ magnetic composite was obtained as 5.18 min and 1.52 min, respectively. Cr(VI) adsorption by AC and $AC/CoFe_2O_4$ magnetic composite was spontaneous and exothermic. In general, our study showed that the composition of $CoFe_2O_4$ magnetic nanoparticles with AC can increase the adsorption capacity of AC from 36 mg/L to 70 mg/L.

• 한국자기학회지
• /
• 제8권2호
• /
• pp.79-85
• /
• 1998

e-beam evaporator로 [Ni80Fe20/Cu/Co/Cu] 다층박막을 증착하여 자성층 사이의 교환 결합 상태에 따라 Co를 Ni80Fe20/Cu 계면에 삽입, 자기 저항비와 자기 저항비와 자화 곡선의 변화를 연구하였다. 강자성 결합 및 비 결합에서는, 계면에 Co를 삽입하게 되면, 자기 저한 값이 증가하지만 반강자성 결합에서는 자기 저항 값이 감소하는 경향이 보였다. 이러한 원인은 계면에 삽입되는 Co가 계면 산란을 증가시키는 것 뿐만 아니라 자성층 간의 교환 결합상태를 변화 시키기 때문에 것으로 판단된다. 아울러 계면에 삽입된 Co는 박막의 다층 구조를 30$0^{\circ}C$ 이상까지 유지시키며 이는 Cork 효과적인 확산 장애물(diffusion barrier)역할을 하기 때문으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.581-587
• /
• 2012

Thermal aging effect on NSR kinetics was studied over Pt/Co/Fe/Ba/$Al_2O_3$ catalyst. The amount of $NO_x$ uptake over Pt/Co/Fe/Ba/$Al_2O_3$ calcined at $400^{\circ}C$ increased with increasing NSR temperature from $200^{\circ}C$ to $400^{\circ}C$, where amount of $NO_x$ uptake is the highest at $400^{\circ}C$ with mol ratio of $NO_x$/Ba = 0.5. Thereafter, the amount of $NO_x$ uptake at $400^{\circ}C$ decreased with the higher calcination temperature, where Pt/Co/Fe/Ba/$Al_2O_3$ catalyst calcined at $700^{\circ}C$ showed an amount of $NO_x$ uptake with the mol ratio of $NO_x$/Ba=0.062. Result of XRD and NSR showed that Fe addition into Pt/Co/Fe/Ba/$Al_2O_3$ suppressed sintering of Pt crystallites and make $NO_x$ uptake larger, compared to no addition of Fe into Pt/Co/Fe/Ba/$Al_2O_3$ catalyst. From BET result, it was found that the change of specific surface area was relatively small by the thermal aging process. Therefore, it was found that the sintering of Pt crystallites caused the decrease of $NO_x$ uptake during NSR reaction and Fe played a role to suppress the sintering process of Pt crystallites caused by thermal aging.

• 한국전기전자재료학회논문지
• /
• 제14권8호
• /
• pp.688-693
• /
• 2001

A series of Fe/CeO$_2$/Fe$_{75}$Co$_{25}$ tunnel junctions (Magnetic Tunnel Junction, MTJ) having CeO$_2$ barrier layers from 30 to 90$\AA$ in thickness were prepared by ion beam sputtering (IBS) method. In order to compare the properties of MTJs, Fe/Al oxide/Fe-Co tunnel junctions were also prepared. Some junctions with a CeO$_2$ barrier layer showed the ferromagnetic tunneling effect and the highest MR ratio at room temperature was 5%. The electric resistance of junctions with a CeO$_2$ barrier layer was higher that that of junctions with an Al oxide barrier. On the other hand, The interface analysis of the Fe/CeO$_2$ bilayer was conducted by means of X-ray photoelectron spectroscopy (XPS). It was found that CeO$_2$ was decomposed to Ce and $O_2$ during sputtering, and Fe was oxidized with these decomposed $O_2$ molecules. The reduction of both electric resistance and MR ratio may be associated with the decomposed Ce in the barrier layer.r.r.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.264-271
• /
• 2007

본 연구에서는 $Fe_2O_3-CoO-Cr_2O_3-MnO_2$계 색상의 무기안료를 공침법을 사용하여 합성하였다. 출발원료로는 $FeCl_3,\;CoCl_2,\;CrCl_3,\;MnCl_2$를 사용하였으며 침전제로는 2N-KOH를 사용하였다. $MnCl_2$는 10 mole%로 고정한 후 세 가지 원료로서 6가지 조성비를 만들어 안료를 합성하였다. 조합된 시료는 1.5시간 $1350^{\circ}C$에서 하소하였다. XRD, FT-IR, SEM 과 UV spectrophotometer를 사용하여 안료의 특성 분석을 하였다. 합성된 안료는 석회유, 석회 바륨유에 각각 6wt%씩 첨가하여 $1260^{\circ}C$ 산화소성, $1240^{\circ}C$ 환원 소성하였다. UV Spectrometer를 사용하여 색상분석을 한 결과는 black, bluish black, dark grayish green을 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.389-393
• /
• 1987

The oxidation of carbon monoxide by gaseous oxygen on 0.53, 1.02, and 1.51 mol $\%$CoO-doped $-Fe_2O_3$ catalysts has been investigated in the temperature range from 340 to 480$^{\circ}C$ under various CO and $O_2$ partial pressures. The oxidation rates have been correlated with 1.5-order kinetics; the 0.5-order with respect to $O_2$ and the first-order with respect to CO. In the above temperature range, the activation energy is 0.34 $\pm$ 0.01 eV${\cdot}$$mol^{-1}$. The electrical conductivity of 0.53, 1.02, and 1.51 mol %CoO-doped $\alpha$-$Fe_2O_3$ has been measured at 350$^{\circ}C$ under various $P_{CO}and $P_{O_2}$. From the conductivity data it was found that $O_2$ was adsorbed on Vo formed by doping with CoO, while CO appeared essentially to be chemisorbed on the lattice oxygen of the catalyst surface. The proposed oxidation mechanism and the dominant defect were supported by the agreement between the kinetic data and conductivities.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.109-112
• /
• 2005

Electronic and magnetic properties of $Ti_{1-x}M_xO_{2-\delta}$ (M=Co and Fe) thin films grown by sol-gel method have been investigated. Anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films were successfully grown on $Al_2O_3$ (0001) substrates and exhibited p-type electrical conductivity while the undoped films n-type conductivity. Room temperature vibrating sample magnetometry measurements on the anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films with same x ($=4.8 at.{\%}$) showed quite similar magnetic hysteresis curves with the saturation magnetic moment of $\~4 {\mu}_B$ per Co ion despite their differences in structural and electronic properties. Such giant magnetic moment is attributable to the unquenched orbital moment of the $Co^{2+}$ ions substituting the octahedral $Ti^{4+}$ sites. Similar ferromagnetic behavior was observed for $Ti_{1-x}Fe_xO_{2-\delta}$ films that are highly resistive compared to the Co doped samples. Saturation magnetic moment was found to decrease for higher x, i.e., $\~2$ and $\~1.5 {\mu}_B$ per Fe ion for x=2.4 and 5.8 at. $\%$, respectively. Conversion electron $M\ddot{o}ssbauer$ spectroscopy measurements predicted the coexistence of $Fe^{2+}$ and $Fe^{3+}$ ions at the octahedral sites of $Ti_{1-x}Fe_xO_{2-\delta}$.