• Title/Summary/Keyword: $ED_s$

Search Result 826, Processing Time 0.032 seconds

Development of Matrix for the Immobilization of High Level Radioactive Waste : Study on the Synthesis of Ce-pyrochlore (고준위 핵페기물의 고정화를 위한 메트릭스 개발 : Ce파이로클로어 합성 연구)

  • ;;;Yudintsev, S. V²
    • Economic and Environmental Geology
    • /
    • v.35 no.2
    • /
    • pp.97-102
    • /
    • 2002
  • Ce-pyrochlore (CaCe $Ti_2 $O_7)was synthesized to study its properties and phase relations in CaO-Ce $O_2$-Ti $O_2$ system because Ce-pyrochlore was known as a promising material for the immobilization of radioactive actinide. The samples were prepared from the high purity starling materials under the pressure of 200~400 kg/$\textrm{cm}^2$ at room temperature, and annealed at 1000~ 150$0^{\circ}C$. The Synthesized samples were analysed and indentified with XRD and SEM/EDS methods. The optimal formation condition of Ce-pyrochlore was at 130$0^{\circ}C$ under $O_2$ atmosphere and the chemical composition of it wasCa$Ca_{1-x}Ti_{2-y}O_{7-x-2y}$(x=0.03-0.05, y=0.02~0.04) At temperature between 130$0^{\circ}C$ 140$0^{\circ}C$, Ce-pyrochlore underwent rapidly the incongruent decomposition to perovskite. Ce-perovskite, a partial solid solution between perovskite and loparite (C $e_{0.66}$Ti $O_3$), was observed as a major phase above 140$0^{\circ}C$.>.

Influence of Sulfate on the Early Hydration in the Solidification of Lime-tailings (소석회-광물찌꺼기 고형화의 초기 수화에 미치는 황산염의 영향)

  • Lee, Hyun-Cheol;Min, Kyoung-Won;Yoo, Hwan-Geun
    • Economic and Environmental Geology
    • /
    • v.46 no.6
    • /
    • pp.535-544
    • /
    • 2013
  • Influence of sulfate on the early hydration in the solidification treatment of abandoned mine tailings was characterized. Solidified specimens using hydrated lime as a binder were prepared with various amounts of added $Na_2SO_4$ and different curing days. Unconfined compressive strength measurement, heavy metal leaching test, XRD analysis were performed after 7-, 14- and 28-days curing. According to curing days strength of solidified specimens using only distilled water increased but those with addition of $Na_2SO_4$ decreased. External cracks of specimens developed definitely with increasing $Na_2SO_4$ concentration and curing days. Concentrations of Cu, Cd, Zn, and As in the leached solutions from solidified specimens decreased significantly but Pb was leached readily in cases of hydrated lime dosage more than 10 wt%. Gypsum and $MgSO_4$ were identified in the cracked solidified specimens by XRD analysis, and pillar-shaped crystals of SEM image were identified as gypsum in reference with EDS analysis. Crystallization of sulfate in the process of lime-tailing solidification caused cracking, which should be supplemented for solidification treatment of highly sulfur-contained tailing.

A Study on Workbench-based Dynamic Service De-sign and Construction of Computational Science Engineering Platform (계산과학공학 플랫폼의 워크벤치 기반 동적 서비스 설계 및 구축에 관한 연구)

  • Kwon, Yejin;Jeon, Inho;Ma, Jin;Lee, Sik;Cho, Kum Won;Seo, Jerry
    • Journal of Internet Computing and Services
    • /
    • v.19 no.3
    • /
    • pp.57-66
    • /
    • 2018
  • EDISON ( EDucation-research Integration through Simulation On the Net) is a web simulation service based on cloud compu-ting. EDISON provides that web service and provide analysis result to users through pre-built infrastructure and various calcu-lation nodes computational science engineering problems that are difficult or impossible to analysis as user's personal resources to users. As a result, a simulation execution environment is provided in a web portal environment so that EDISON can be ac-cessed regardless of a user's device or operating system to perform computational science engineering analysis simulation. The purpose of this research is to design and construct a workbench based real - time dynamic service to provide an integrat-ed user interface to the EDSION system, which is a computational science engineering simulation and analysis platform, which is currently provided to users. We also devised a workbench-based user simulation service environment configuration. That has a user interface that is similar to the computational science engineering simulation software environment used locally. It can configure a dynamic web environment such as various analyzers, preprocessors, and simulation software. In order to provide these web services, the service required by the user is configured in portlet units, and as a result, the simulation service using the workbench is constructed.

The Effects of a Performance Assessment Based on the Experimental Practice on Student's Science Achievement and Affective Domain in the Middle School Science (실험실습법에 의한 수행평가가 중학생의 과학성취도 및 정의적 영역에 미치는 영향)

  • Lee, Ji-Hyun;Nam, Jeong-Hee;Moon, Sung-Bae
    • Journal of The Korean Association For Science Education
    • /
    • v.23 no.1
    • /
    • pp.66-74
    • /
    • 2003
  • The purpose of this study was to examine the effects of an application of the experimental practice which is one of the performance assessments on student's science achievement and affective domain in the middle school science For this study, two classes were chosen from a co-ed middle school in Gimhae, and assigned to the experimental and the control groups. Prior to the instructions, a science achievement test and a affective domain test were administered. After the instructions, post-tests which were similar to the pretests were also administered. The results showed that the performance assessment based on an experimental practice was more effective of enhancing students' science achievement. However, there was no significant difference in an affective domain test between the two groups. For the control group, there was a significant difference between the pretest and post test in affective domain. It means that there was a negative change in affective domain of the control group.

Qualitative and Quantitative Analysis of Microbial Community Structure in the Sequencing Batch Reactor for Enriching ANAMMOX Consortium (연속회분식 반응기를 이용한 혐기성 암모늄 산화균 농후배양에서의 정성 및 정량적 미생물 군집구조 분석)

  • Bae, Hyo-Kwan;Jung, Jin-Young
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.10
    • /
    • pp.919-926
    • /
    • 2009
  • Enrichment of anaerobic ammonium oxidation (ANAMMOX) bacteria is the essential step for operating full-scale ANAMMOX bioreactor because adding a significant amount of seeding sludge is required to stabilize the ANAMMOX reactor. In this study, the enrichment of ANAMMOX bacteria from an activated sludge using sequencing batch reactor was conducted and verified by analyzing changes in the microbial community structure. ANAMMOX bacteria were successfully enriched for 70 days and the substrate removal efficiencies showed 98.5% and 90.7% for $NH_4\;^+$ and $NO_2\;^-$ in the activity test, respectively. The phylogenetic trees of Planctomycetes phylum showed that the diverse microbial community structure of an activated sludge was remarkably simplified after the enrichment. All 36 clones, obtained after the enrichment, were affiliated with ANAMMOX bacteria of Candidatus Brocadia (36%) and Candidatus Anammoxoglobus (64%) genera. The quantification using real-time quantitative PCR (RTQ-PCR) revea ed that the 16S rDNA concentration of ANAMMOX bacteria was 74.8% compared to the granular ANAMMOX sludge obtained from an upflow ANAMMOX sludge bed reactor which had been operated for more than one year. The results of molecular analysis supported that the enriched sludge could be used as a seeding sludge for a full-scale ANAMMOX bioreactor.

Surface Characteristics of Dental Casting Palladium Alloy for Replacement of Gold Alloy (금대체를 위한 치과주조용 파라듐 합금의 표면특성)

  • Park, Seon-Yeong;Hwang, In-Jo;Yu, Ji-Min;Park, Min-Gyu;Im, Sang-Gyu;Bae, Ho-Seong;Choe, Han-Cheol
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2016.11a
    • /
    • pp.196-196
    • /
    • 2016
  • 치과나 기공소로부터 높은 원가로 인한 재료선택에 어려움을 겪고 있어 귀금속 금합금의 물성을 가질 수 있도록 하면서 가격급등으로 인한 문제 해결하기 위한 비귀금속 합금으로 대체가 필요하기에 이에 따른 연구가 이루어져 국산 제품의 상품화를 위해 파라듐을 이용하여 적합한 새로운 합금을 개발하는 것이 필요하다. 치과용 골드합금은 미국치과의사 협회의 구정에 의하면 1형부터 4형까지 분류하고 있으며 3형에 해당하는 강도와 기계적인 특성을 갖도록 파라듐으로 대체하는 연구가 진행중이거나 시판되고 있다. 따라서 본 연구에서는 2형, 3형 및 4형을 대체가능하도록 팔라듐을 기반으로 한 새로운 합금을 설계하고 합금의 성분원 소인 Au(1~5), Pd(20~25), Ag(70~75), In(1.5) 및 Zn(2)등으로 조성을 변화시켜 측량 후 합금을 제조하기 위하여 아르곤 분위기하의 진공아크용해로를 이용하여 용해하였다. 정량된 금속을 진공아크 용해로에 장입하고 용해는 균질한 합금이 되도록 최소한 6회 이상 용융을 실시하며 합금성분의 손실이 발행하지 않도록 보정을 하였다. 합금의 미세조직 관찰을 위하여 샘플을 고속 다이아몬드 정밀 절단기(Acculom-5, STRUERS, Denmark)를 이용하여 절단한 후 2000 grit의 Sic 연마지에서 단계적으로 $0.3{\mu}m$ 알루미나 분말까지 연마한 후 초음파 세척을 하였다. 준비한 시편은 KCN과 $(NH_4)_2S_2O_8$을 1:1로 혼합한 부식액으로 에칭한 후 OM과 SEM을 이용하여 조직을 관찰하였으며 각 샘플의 성분변화는 EDS 분석을 통해 확인하고 결정구조는 XRD를 사용하여 분석하였다. 경도시험은 비커스경도시험기를 이용하여 5kg의 하중을 30초간 작동시켜 압흔을 연결된 micron으로 평균값을 측정하였다. 각 시편의 부식거동은 POTENTIOSTAT(Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내환경화 유사한 $36.5{\pm}1^{\circ}C$의 0.9% NaCl에서 실시하였다. 인가전위는 -1500mV에서 1000mV까지 1.67 mV/min의 주사속도로 인가하여 시험을 수행하였으며 분극곡선으로부터 부식전위와 부식전류밀도 및 부동태영역의 전류밀도로 금속의 용출거동을 조사하였으며 부식이 끝난 시편은 FE-SEM과 EDS를 사용하여 조사하였다. 기계적인 특성은 Pd-Ag에 3wt%의 Au를 첨가한 합금이 Pd-Ag에 1.5wt%합금을 첨가한 경우에 비하여 기계적인 특성이 증가하고 내식성이 크게 증가하였다. 이들 합금에 Cu를 11wt%를 첨가한 경우는 비커스경도가 200이상으로 높게 나타났지만 내식성이 크게 감소하였다.

  • PDF

Investigation of Insect Pests and Injury Characteristics of Stathmopoda auriferella (Walker) on Kiwi Fruit Tree (참다래를 가해하는 해충과 우점종인 열매꼭지나방의 가해특성)

  • 박종대;박인진;한규평
    • Korean journal of applied entomology
    • /
    • v.33 no.3
    • /
    • pp.148-152
    • /
    • 1994
  • This study was carried out to investigate insect specles of Kiwi fruit, and ecological characteristicsof Stathmopoda m Chonnam province from 1991 to 1993 Twelve families and thirteen specieswere identified during the study. Sfothmopoda aurijerello and mulberp scale were key insect pestsamong them. The body sizes of each stage of S. a~irijereilo was measured and found to be 0.12 mmfor egg, 9.8 mm for mature lawa. 5.9 mm for pupae and 123mm for adult with opened wings.S, ouriferelia appers to have two generations a yea Adults occut~ed from late May to midJulyand mid-August to early September Mth two peaks m early to midJune and late August. Changein age structure (% lawe: % pupae) over time was 100: 0 in earlyJul, 96. 1 . 3 9 in midduly. 64.9:35 1 in late July. 19.8 . 80 2 in early August, and 0 : 100 in mld-August Damaged fruit was 4 6%in early July, increase above 40% 1" midJuly, and then the damage surpassed the damage threshold.The rate of fruit damaged was 45.9%, and there wbi no significant dtfferences among countiesDamaged parts of fruits were manly fruit apex Mth 70% and followed by fruit stalk w~th 11.1%.The rate of fruit damaged by varieties were Hayward with 25.7%. Monty with 17 5%. Hyangrokwith 13.9%, Abott with 9.3% and Bruno with 6.0%. with 9.3% and Bruno with 6.0%.

  • PDF

Mineral Contents in Soybeans with Different Cooking Methods (조리방법에 따른 콩의 무기질 함량)

  • Kim, So Young;Hwang, Jinbong;Park, Ji Su;Choi, Youngmin;Nam, Jin-sik;Lee, Jong-Hun;Seo, Dongwon
    • The Korean Journal of Community Living Science
    • /
    • v.28 no.4
    • /
    • pp.525-535
    • /
    • 2017
  • The purpose of this study was to compare the of ash and minerals contents in different types of soybeans (Baektae, Seoritae, Heuk Tae and Seomoktae) with different cooking methods. Raw, boiled and pan-fried soybean samples were prepared by the Rural Development Administration. Samples were digested by using a microwave and analyzed using ICP-OES and ICP-MS for determining the ash and minerals contents. Ash content in four raw soybeans ranged from 5.07 to 5.59 g/100g. There was no significant difference in the ash contents in raw and pan-fried soybeans (p>0.05). However, the ash content of boiled soybeans was 9 to 14% lower than that of raw soybeans (p<0.05). The minerals contents of Baektae and Seomoktae were high and the major minerals of various soybeans were K, P, Mg, and Ca, which accounted for ash 60.80-65.61%, 20.73-24.26%, 6.90-8.46% and 5.79-8.60%, respectively. The mineral contents of soybeans were significantly different depending on the type of cultivar (p<0.05), but the tendency was not constant. Because the process of soaking and boiling of soybeans made the soluble minerals elute, the ash and mineral contents were reduced. And process of pan-frying of soybeans make Because process of soaking and boiling of soybeans make soluble minerals elute (Ed- this section is very confused and seems to have 2 sentences combined: please check your intended meaning), the ash and mineral contents were reduced. As the soybeans are cooked by pan-frying, the water in the soybeans is evaporated and the mineral content is concentrated or kept constant. These results can serve as the basic data of mineral content during processing and cooking of soybeans.

A brief method for preparation of gintonin-enriched fraction from ginseng

  • Choi, Sun-Hye;Jung, Seok-Won;Kim, Hyun-Sook;Kim, Hyeon-Joong;Lee, Byung-Hwan;Kim, Joon Yong;Kim, Jung-Hyun;Hwang, Sung Hee;Rhim, Hyewon;Kim, Hyoung-Chun;Nah, Seung-Yeol
    • Journal of Ginseng Research
    • /
    • v.39 no.4
    • /
    • pp.398-405
    • /
    • 2015
  • Background: Ginseng has been used as a tonic for invigoration of the human body. In a previous report, we identified a novel candidate responsible for the tonic role of ginseng, designated gintonin. Gintonin induces $[Ca^{2+}]_i$ transient in animal cells via lysophosphatidic acid receptor activation. Gintonin-mediated $[Ca^{2+}]_i$ transient is linked to anti-Alzheimer's activity in transgenic Alzheimer's disease animal model. The previous method for gintonin preparation included multiple steps. The aim of this study is to develop a simple method of gintonin fraction with a high yield. Methods: We developed a brief method to obtain gintonin using ethanol and water. We extracted ginseng with fermentation ethanol and fractionated the extract with water to obtain water-soluble and water-insoluble fractions. The water-insoluble precipitate, rather than the water-soluble supernatant, induced a large $[Ca^{2+}]_i$ transient in primary astrocytes. We designated this fraction as gintonin-enriched fraction (GEF). Results: The yield of GEF was approximately 6-fold higher than that obtained in the previous gintonin preparation method. The apparent molecular weight of GEF, determined using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, was equivalent to that obtained in the previous gintonin preparation method. GEF induced $[Ca^{2+}]_i$ transient in cortical astrocytes. The effective dose (ED50) was $0.3{\pm}0.09{\mu}g/mL$. GEF used the same signal transduction pathway as gintonin during $[Ca^{2+}]_i$ transient induction in mouse cortical astrocytes. Conclusion: Because GEF can be prepared through water precipitation of ginseng ethanol extract and is easily reproducible with high yield, it could be commercially utilized for the development of gintoninderived functional health food and natural medicine.

교류형 플라즈마 방전 표시기 방전유지 전압의 전압 상승 시간의 변화에 따른 방전 현상의 변화

  • 김중균;양진호;윤차근;황기웅
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.229-229
    • /
    • 1999
  • 교류형 플라즈마 방전 표시기(AC Plasma Display Panel, AC PDP)의 구동에서의 방전 현상은 기입방전, 유지방전, 소거 방전이 있다. 이중 유지 방전은 표시장치로서의 휘도와 계조의 표현을 위한 방전으로 표시기로서의 효율을 결정하게 된다. 본 연구에서는 유지 방전 전압의 상승 시간의 변화에 따른 방전현상과 휘도, 효율의 변화를 살펴 보았다. 방전 현상에서의 가장 큰 변화는 교류형 플라즈마 방전 표시기의 방전 개시 전압과 방전 유지 전압의 변화이다. 유지 전압의 상승시간이 증가할수록 방전 개시 전압과 방전 유지 전압의 변화이다. 유지 전압의 상승 시간이 증가할수록 방전 개시 전압과 방전 유지 전압의 차(sustain margin)는 감소하여 상승 시간이 1$\mu$s/100V 이상의 영역에서는 방전 개시 전압과 방전 유지 전압이 차이가 없어지게 된다. 이는 방전 유지 전극 위의 유전체에 쌓이게 되는 벽전하(wall charge) 양의 감소에 의한 방전 약화의 영향을 보여질 수 있다. 그러나 방전 유지 전압의 형태와 전류의 시간적인 변화를 살펴보면 이러한 약한 방전은 벽전하의 감소에 의한 방전 시의 전계 감소보다는 방전 전류의 발생 시간이 방전 전압이 증가하여 최고점에 이르지 못한 시간에 위치하여 방전이 형성될 때의 전계가 강하지 못하기 때문인 것을 알 수 있다. 방전 전류를 측정한 결과에 의하면 방전 전류의 시작은 변위 전류가 흐르고 난 후부터 시작되며 그 결과 방전 전류가 최고점에 도달하는 시간은 방전 전압 상승 시간이 길어질수록 낮은 전압에서 형성되게 된다. 또한 방전 유지 전압의 상승 시간이 길어질수록 플라즈마 방전표시기의 휘도와 효율은 낮아지고 이 결과 또한 약한 전계에서의 방전에 의한 결과로 생각되어진다.플라즈마의 강도값을 입력하여 플라즈마의 radiation을 검출하고, 스퍼터링 공정중 실질적인 in-situ 정보로 이용하였다. PEM을 통하여 In/Sn의 플라즈마 강도변화를 조사하였다. 초기 In/Sn의 플라즈마 강도(intensity)는 강도를 100하여, 산소를 주입한 결과, plasma intensity가 35 줄어들었고, 이때 우수한 ITO 박막을 얻을 수 있었다. Pulsed DC power를 사용하여 아크 현상을 방지하였다. PET 상에 coating 된 ITO 박막의 표면저항과 광투과도는 4-point prove와 spectrophotometer를 이용하여 분석하였고, AES로 박막의 두께에 따른 성분비를 확인하였다. ITO 박막의 광투과도는 산소의 유량과 sputter 된 In/Sn ion의 plasma emission peak에 따라 72%-92%까지 변화하였으며, 저항은 37$\Omega$/$\square$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러 장점들을 보고하고자 한다.성이 우수한 시

  • PDF