• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1563-1565
• /
• 2008

Hydrophobic plastic plates employing nano surface features are injection molded using thermoplastic materials. A variotherm molding process is devised for filling the nano pores and releasing the molded nano features from the master. The size of the molded nano surface features are about 100nm in diameter and 200nm in height. The size of the molded plate is about 30mm x 30mm and the thickness is 1mm. As molding materials, Polypropylene, PMMA, COC and PC are employed, which are all typical commodity thermoplastic materials. The mold temperature(stamper temperature) is investigated as a major processing parameter for molding high aspect ratio nano surface features. Almost fully molded nano features are fabricated above a certain level of mold temperature depends on the employing material. The contact angles on the injection molded plates are measured to estimate the hydrophobicity and found to have higher contact angle up to 180% compared to the blank plate with no surface features.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.91-103
• /
• 1998

Design data for COD and nitrogen removal from wastewater were collected from Pilot's Multi-stage Bio-reactor. Hyraulic conditions and pollutant loadings were varied in order to optimize the biological and operational parameters. Pilot's experimental results summarize as followings. 1. T-N removal efficiency in the organic volumetric loading 0.2 kgCOD/m$^{3}$·d was obtained as maxium of 85% at internal recycle ratio 2.5 and in more ratio than this it was decreased. Organic removal efficiency was about 91% under the overall experimental conditions and not influenced by recycle ratio.. 2. Nitrification reaction was shown as maxium in the SCOD$_{cr}$/NH$^{+}$-N ratio of 6.5 and in more ratio than this it was decreased. Denitrification rate was the maxium as 85% in more than 7.5 of SCOD$_{cr}$/NO$_{x}$-N ratio and in the ratio over this ratio it becomes constant. 3. By utilizing an applied new model of Stover-Kincannon from Monod's kinetic model, concentration of T-N in the effluent according to flow quanity in the influent was estimated as 8.74 and -67.5 respectively. The formula for estimating T-N concentration of effluent was obtained like this: N$_e$=N$_0$(1- $\frac{8.74}{(QN$_0$/A)-67.05}$)

• Food Science of Animal Resources
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2003

All diets were based on feeds of fattening period pigs(LY x D, ca. 90 kg) with six treatments, which were the control, containing 5% beef tallow(C), 3% beef tallows and 2% perilla seeds oil(T1), 250 ppm vit. E(${\alpha}$-tocopheryl acetate) in T1(T2), 3% beef tallow and 2% squid viscera oil(T3), 250 ppm vit. E in T3(T4), and 3% beef tallow and 2% CLA(T5), respectively. Produced porks and their carcass characteristics were as follows. The daily gain of pigs was higher in T2 and 73 than any other treatments(p<0.05). Its T2 and T3 was 3.71 and 3.80 respectively, however, there was no significance in feed intake. The highest back fat thickness was shown in control group on market weight, while there was no significant difference on their initial weight. Loin-eye muscle area did not show any significant difference on initial weight and on market weight, however, its T5 was about twice as large as T2's. Content of triglyceride in blood was high in control group as compared to others; especially, the values for T3, T4 and T5 were significantly low(p <0.05). There was no significant difference in total cholesterol contents, and the ratio of HDL cholesterol/total cholesterol was higher in vit. E treated samples than untreated sample. Atherogenic index was high in sample with T3 and low in sample with T2. The perilla seed oil, squid fish oil, and vit. E decreased atherogenic index. Dressing percentage, back fat thickness, and grade did not show any significant difference(p >0.05); however, T2, C and T3, T1 and T5 showed 4.67, 4.29, 4.00 respectively, in grades.

• Journal of Microbiology
• /
• v.45 no.5
• /
• pp.466-472
• /
• 2007

A total of 98 vancomycin-resistant Enterococcus faecium (VREF) isolates (58 isolates from patients and 40 isolates from poultry) were compared based on their antimicrobial susceptibility, Tn1546 element organization, and pulsed-field gel electrophoresis (PFGE) patterns. This comparison aided in determining the relationships between the groups of isolates. All the VREF isolates harbored the vanA gene; however, 29 (29.6%) of the isolates exhibited the VanB phenotype-vanA genotype. Furthermore, the VREF isolates from humans and poultry exhibited distinct antimicrobial resistance patterns. The PCR mapping of the Tn1546 elements exhibited 12 different transposon types (A to L). The VREF isolates of poultry were classified into types A to D, whereas the human isolates were classified into types E to L. A PFGE analysis demonstrated a high degree of clonal heterogeneity in both groups of isolates; however, the distinct VREF clones appeared in each group of isolates. The deletion of the vanX-vanY genes or insertion of IS1216V in the intergenic region from the vanX-vanY genes is directly associated with the incongruence of the VanB phenotype-vanA genotype in human VREF isolates. These data suggest that the VREF isolates exhibit distinct phenotypic and genotypic traits according to their origins, which suggests that no evidence exists to substantiate the clonal spread or transfer of vancomycin resistance determinants between humans and poultry.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.1
• /
• pp.16-21
• /
• 2006

Parallel testing means ordering a number of tests at the same time so abnormalities in any of the tests can be found quickly and used in making the diagnosis. This is a good medical strategy to eliminate diseases and it is relatively inexpensive if all the tests are potential sources of information and performed on the same analyzer. In regression, the equation for the straight line is recast as y = bx + a. This change in terminology leads to confusion. Here a is the y-intercept or constant and b is the coefficient or slope of the line. A few more words of caution about regression - as in all of statistics there are certain assumptions: the x value is a true measure, both X and Y distributions are normal, and homoscedasticity, i.e., the variance of y is the same for each value of x. In this study the linearity classification made by different scientists were always in agreement. Typical examples of curves that were considered linear are presented in Fig. 1-5. Because these automated procedures values were usually within five percent of each other the curvature could be easily detected. The plot of the WBC, RBC, hemoglobin, hematocrit and platelet concentrations from approximately 74.4 to $0{\times}10^3/{\mu}L$ and $80.4-0{\times}10^3/{\mu}L$, $5.6-0{\times}10^6/{\mu}L$ and $6.1-0{\times}1106/{\mu}L$, 18.3-0 g/dL and 19.0-0 g/dL, 54.1-0% and 56.8-0% and 642.0 to $0.03{\times}10^3{\mu}L$ and $754.0-0{\times}10^3/{\mu}L$ on the ADVIA 2120 C Versus and A and B typical of an acceptable linear study as shown in Fig. 1-5. The grand mean of R2, intercept and slope is 0.99898, 0.99459 and 1.54626.

• Journal of Korean Public Health Nursing
• /
• v.1 no.1
• /
• pp.32-44
• /
• 1987

The purpose of this survey was to find out the knowledge and the disease management of the Tuberculosis patients by themselves among the first grade middle and high school students in Seoul city during the period of June 15-July 19, 1986. Questionaires were used to collect the data and were analysed from answers of 188 students at the 113 schools. The results were as follows: 1. The ages of the students were distributed as follows: in middle school, 13 years old was $70.0\%$. 14 years old, $20.0\%$, and 15 years old, $6.7\%$. In high school, 16 years old was $66.5\%$, 17 years old, $18.4\%$, and 15 years old, $10.1\%$. 2. In X-ray mass examination by school, the rate of execution was $50.4\%$ in middle school and $96.7\%$ in high school, and in X-ray mass examination by student, it was $50.1\%$ in middle school and $97.3\%$ in high school. 3. The prevalence of Tuberculosis among the middle school students was $00.3\%$and high school students, $0.15\%$. 4. Of the total, $77.1\%$ of the respondents did not realized Tuberculosis bdore X-ray mass examination 5. The perfect cure rate of the respondents was $52.7\%$. 6. General characteristics of the respondents: a. The educational background was varied as follows: of the total $47.9\%$ of the fathers had the level of high school education and $37.2\%$ of the mothers had the level of middle school education. The educational background of the parents had no statistical significant to the medical cure rate of Tuberculosis. (P>0.05). b. The average monthly income of the family was as follows : above five hundred thousand won was $21.8\%$, three or four hundred thousand won was $22.9\%$, and below two hundred thousand won was $10.6\%$. The most frequent family size was 5-6 persons. $(59.6)\%$. 7. The actual situation of Tuberculosis control and the variables related to the treatment: a. $69.1\%$ of the respondents wanted mental support from their surroundings. $48.7\%$ of the respondents answered that their parents or the other family helped treatment as mental supporter, b. As a medical service, $53.2\%$ of the respondents were treated at Health Center, $38.8\%$ were treated at a hospital. A medical service was statistically significant to the medical cure (P<0.01). c. Family members of $61.7\%$ of the respondents had checked chest X-ray. A X-ray examination of family was statistically significant to the medical cure (P<0.005). d. $73.9\%$ of the respondents had taken the Anti-Tuberculosis-drugs regularly. Regular taking of Anti-Tuberculosis drugs was statistically significant to the medical cure (P<0.005). e. $89.4\%$ of the respondents had received a regular examination during the treatment. A regular examination was statistically significant to the medical cure (P<0.05). f. The period of perfect cure was that $50.0\%$ of the respondents took from half a year to one year, $25.2\%$ took below half a year and $16.2\%$ took from one year to one year and a half. g. The rate of the respondents who abhored to let anyone know their disease was $93.1\%$. 8. Knowledge related with Tuberculosis: a .$63.3\%$ of the respondents answered that Tuberculosis is a communiable disease. b. $89.9\%$ of the respondents answered that there is a preventive method of Tuberculosis. Among them, $28.4\%$ answered that it is B.C.G. vacination. c. $96.8\%$ of the respondents belived they can be cured perfectly. d. $42.4\%$ of the perfect curer answered that they had have permanent immunity of Tuberculosis. According to the results of above study, it is desired to be practiced X-ray mass examination to the total middle school students. Nurse teachers and the responsible persons who participated to the helping of disease management to the Tuberculosis patients must make an offer knowledge of Tuberculosis to the Tuberculosis patients. And also, it will be very helpful to the cure of Tuberculosis patients if they do their best and to have a mental supporter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.659-665
• /
• 2016

The effects of three different feeding systems on beef cattle production performance, rumen fermentation, and rumen digesta particle structure were investigated by using 18 Limousin (steers) with a similar body weight ($575{\pm}10kg$) in a 80-d experiment. The animals were equally and randomly divided into three treatment groups, namely, total mixed ration group (cattle fed TMR), SI1 group (cattle fed concentrate firstly then roughage), and SI2 group (cattle fed roughage firstly then concentrate). The results showed that the average daily gain was significantly higher in cattle receiving TMR than in those receiving SI1 and SI2 (p<0.05). Consumption per kg weight gain of concentrate, silage, and combined net energy (NEmf) were significantly decreased when cattle received TMR, unlike when they received SI1 and SI2 (p<0.05), indicating that the feed efficiency of TMR was the highest. Blood urea nitrogen (BUN) was significantly decreased when cattle received TMR compared with that in cattle receiving SI1 (p<0.05), whereas there was no difference compared with that in cattle receiving SI2. Ammonia nitrogen concentration was significantly lower in cattle receiving TMR than in those receiving SI1 and SI2 (p<0.05). The rumen area of cattle that received TMR was significantly larger than that of cattle receiving SI1 (p<0.05), but there was no difference compared with that of cattle receiving SI2. Although there was no significant difference among the three feeding systems in rumen digesta particle distribution, the TMR group trended to have fewer large- and medium-sized particles and more small-sized particles than those in the SI1 and SI2 groups. In conclusion, cattle with dietary TMR showed increased weight gain and ruminal development and decreased BUN. This indicated that TMR feeding was more conducive toward improving the production performance and rumen fermentation of beef cattle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.10
• /
• pp.1504-1510
• /
• 2013

Native chickens hold a significant share of the market in China. In response to the huge demand from the market, the productivity of Chinese native chickens needs to be improved. Cross breeding is an effective method to increase productivity, although it might affect meat quality. In this study, two pure lines (SD02 and SD03) of Erlang mountainous chickens were hybridized with a yellow feather and faster growing line (SD01). The effect of hybridization on carcass and meat quality (physiochemical and textural traits) was measured in the $F_1$ population at d 91 of age. The hybrids exhibited higher body weight and dressed weight, and amount of semi-eviscerated, eviscerated, breast muscle and abdominal fat (p<0.05). Abdominal fat yield also increased (p<0.05) compared to the offspring of the two pure-lines. Meanwhile, there was no significant difference in meat quality traits except for the myofiber diameter and density and the shear force of the breast muscle. Overall, the offspring of cross-lines were similar to pure lines in meat color, pH value, inosinic acid, crude protein, crude fat, dry matter, moisture content and amino acid composition in the breast muscle. These results suggest that productivity can be improved via cross-breeding while maintaining meat quality of the Erlang mountainous chicken.

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.30.1-30.11
• /
• 2020

Objectives: This micro-computed tomographic (CT) study aimed to compare the shaping abilities of ProTaper Next (PTN), One Shape (OS), and One Curve (OC) files in 3-dimensionally (3D)-printed mandibular molars. Materials and Methods: In order to ensure standardization, 3D-printed mandibular molars with a consistent mesiobuccal canal curvature (45°) were used in the present study (n = 18). Specimens were instrumented with the OC, OS, or PTN files. The teeth were scanned pre- and post-instrumentation using micro-CT to detect changes of the canal volume and surface area, as well as to quantify transportation of the canals after instrumentation. Two-way analysis of variance was used for statistical comparisons. Results: No statistically significant differences were found between the OC and OS groups in the changes of the canal volume and surface area before and after instrumentation (p > 0.05). The OC files showed significantly less transportation than the OS or PTN systems for the apical section (p < 0.05). In a comparison of the systems, similar values were found at the coronal and middle levels, without any significant differences (p > 0.05). Conclusions: These 3 instrumentation systems showed similar shaping abilities, although the OC file achieved a lesser extent of transportation in the apical zone than the OS and PTN files. All 3 file systems were confirmed to be safe for use in mandibular mesial canals.

• Journal of Integrative Natural Science
• /
• v.3 no.2
• /
• pp.72-77
• /
• 2010

Alginate lyases, also known as alginases or alginate depolymerases, catalyze the degradation of alginate by a ${\beta}$-elimination mechanism that has yet to be fully elucidated. Alginate is a copolymer of ${\alpha}$-L-guluronate (G) and its C5 epimer ${\beta}$-D-mannuronate (M), arranged as homopolymeric G blocks, M blocks, alternating GM or random heteropolymeric G/M stretches. Almost all alginate lyases depolymerize alginate in an endolytical fashion via a ${\beta}$-elimination reaction. The alginate lyase Atu3025 from Agrobacterium tumefaciens strain C58, consisting of 776 amino-acid residues, is a novel exotype alginate lyase classified into polysaccharide lyase family 15. Till now there is no crystal structure available for this class of proteins. Since there is no template with high sequence identity, three-dimensional coordinates for exotype alginate lyase (PL 15 family) were determined using modeling methods (Comparitive modeling and Fold recognition). The structures were modeled using the X-ray coordinates from Heparinase protein family (PDB code: 3E7J). This enzyme (Atu3025) displays enzymatic activity for both poly-M and poly-G alginate. Since poly-M is widespread; docking of a tri-mannuronate against the modeled structure was performed. We identified some of those residues which are crucial for lyase activity. The results from this study should guide future mutagenesis studies and also provides a starting point for further proceedings.