• 한국축산시설환경학회지
• /
• 제4권2호
• /
• pp.167-174
• /
• 1998

It is known that the anaerobic fermentation of organic matter (OM) is divided into 2 phases, acidogenic phase in which OM is digested into volatile fatty acid (VFA), and methanogenic phase where the produced VFA is converted to CH4 and CO2. In a natural fermenting procedure, these 2 phases occur at the same time. However the total production of end products (methane) may be limited if these 2 phases occur at the same time. This is believed to be due to the difference in growth rate, substrate-utilizing efficiency and favorable environment for each microbes (acidogens and methanogens), involved in each phase. It is therefore suggested for the maximum recycling of organic waste (such as animal waste) through providing 2 different steps in fermenting procedure, acidogenic phase and methanogenic phase, in each case the activity of involved microbes can be maintained at the maximum level. The results obtained from these experiments are summarized as follows : The loading rates of swine waste were made through 2.5, 5 and 10 gVS / l / d to identify its acidogenic fermenting character in this study. The VFA yield was maximized at 10 gVS / l / d of loading rate. On the basis of this study was executed to identify the optimum HRT of 1, 2 and 4 days at 10 gVS / l / d of loading rate in acidogenic phase. The maximum VFA yield was obtained at 1 days of HRT.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권7호
• /
• pp.956-961
• /
• 2012

Eight male cattle of Local Yellow breed with an average live weight of 121 kg and an average age of 18 months were used to evaluate the effects of different levels of sun-dried cassava foliage supplementation (Manihot esculenta) on intake, digestibility and N retention. Rice straw ad libitum and para grass (Brachiaria mutica) at 1% DM of BW comprised the basal diet. The study was arranged as a $4{\times}4$ double Latin square design, with cassava foliage contributing 0, 0.8, 1.6 or 2.4 g CP/kg BW. The cattle selected cassava leaves in preference to petioles. Petiole intake decreased from 64 to 48% of offered petioles when the cassava foliage proportion increased from the lowest to the highest level. The cattle consumed all the leaves at the two lower levels of cassava foliage inclusion and 91% at the highest level. Rice straw intake decreased significantly as the level of cassava foliage increased. Intake of DM, OM, NDF, and ADF increased significantly with increasing intake of cassava foliage. Daily DM intake per 100 kg BW increased from 2.7 to 3.2 kg with increasing cassava foliage intake. No effect on CP digestibility was detected when the level of cassava foliage increased. Digestibility of DM, OM, NDF and ADF was significantly higher in the group fed no cassava foliage than in the other groups. N retention increased from 16 to 28 g/d with the first level of cassava foliage inclusion, but levelled out at the two highest levels. N excretion increased in both faeces and urine as a response to higher intake of cassava foliage. Maximum N retention occurred when 40% of total N intake came from cassava foliage (equivalent to 1.3 g CP/kg BW).

• 대한화학회지
• /
• 제42권6호
• /
• pp.646-651
• /
• 1998

기체크로마토그래피에서 황화합물의 분자구조와 용리시간과의 관계를 연구하였다. 분석대상인 황화합물은 황화수소, 이산화항, 이황화탄소, 에틸메르캅탄, 황화이메틸, 이소프로필메르캅탄, 노말프로필메르캅탄, 황화에틸메틸, 황화이에틸, t-부틸메르캅탄, 테트라히이드로티오핀, 티오핀, 2-클로르티오핀이었다. 다중선형회귀분석방법으로 용리시간과 분자의 설명인자 사이의 상관관계를 설명할 수 있었다. 기체크로마토그래피에서 오븐 온도 프로그램을 30$^{\circ}C$에서 10.5분간 유지 후 15$^{\circ}C$/min 비율로 150$^{\circ}C$까지 증가하는 것으로 설정하였다. SAS를 사용하여 사대적 용리시간에 대한 예측식을 다음과 같이 얻을 수 있었다. $RRT=0.121bp+14.39dp-8.94dp^2+0.0741sqmw-35.78\;(N=8,\;R^2=0.989, \;Variance=0.175,\;F=66.21)$. 상대적 용리시간은 끓는점, 분자량의 제곱근 및 분자쌍극자모멘트의 함수이며 끓는점에 의한 영향이 가장 컸다. 무극성 컬럼 사용시 분자쌍극자모멘트가 0.805D에서 용리시간이 가장 길었다. 분자구조가 평면성을 띠면서 대칭성이 높은 물질은 용리속도가 작았다. 훈련세트(training set)에서 SAS 프로그램을 통해 얻은 예측식의 상관계수의 제곱$(R^2)$은 0.989이며 분산은 0.175이다. 시험세트(testing set)에서 3개의 황화합물에 대하여 예측식을 통해 얻은 상대적 용리시간과 관측된 값 사이의 분산은 0.432 이었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권5호
• /
• pp.720-726
• /
• 2006

In an attempt to develop an artificial diet for growing olive flounder (Paralichthys olivaceus), weight gain, feed utilization and nutrient retention were investigated in fish fed moist (MP), semi-moist (SMP) and extruded pellets (EP). Excretion of nitrogen and phosphorus was also estimated based on their whole body gain and intake. EP and MP composed of raw fish and SMP made of formulated powder feed with water were prepared to have the same energy contents on a dry matter basis. A total of 240 fish with an average initial weight of 120 g were randomly distributed to each (20 fish/tank) of 12 circular plastic tanks (4 tanks/treatment) and fed experimental diets for 8 weeks. Fish groups fed EP (209 g) or SMP (209 g) recorded higher final weight than those fed MP (176 g), while dry feed consumption was highest in SMP groups (106 g), followed by MP (71 g) and EP groups (62 g). As a consequence, fish groups fed EP showed much lower feed conversion ratio than the other two groups. Protein efficiency ratio was also significantly higher in fish groups fed EP (2.55) than in those fed MP (1.44) and SMP (1.31). Fish groups fed EP, which showed the highest nitrogen retention of 43.9%, resulted in the lowest excretion of nitrogen of 35.5 g per kg gain. Also, the lowest phosphorus excretion of 6.0 g per kg gain was found in the EP groups with the highest P retention (37.0%) among treatments. Although the EP groups had the lowest dietary energy intake, they retained the highest energy in the whole body among treatments. The present results showed that EP could be more advantageous than MP or SMP in terms of growth, feed utilization and excretion of nitrogen and phosphorus for olive flounder.

• Journal of Microbiology and Biotechnology
• /
• 제18권11호
• /
• pp.1809-1818
• /
• 2008

Biotechnological treatment of sulfate- and metal-ions-containing acidic wastewaters from mining and metallurgical activities utilizes sulfate-reducing bacteria to produce sulfide that can subsequently precipitate metal ions. Reducing sulfate at a low pH has several advantages above neutrophilic sulfate reduction. This study describes the effect of sulfide removal on the reactor performance and microbial community in a high-rate sulfidogenic gas-lift bioreactor fed with hydrogen at a controlled internal pH of 5. Under sulfide removal conditions, 99% of the sulfate was converted at a hydraulic retention time of 24 h, reaching a volumetric activity as high as 51 mmol sulfate/l/d. Under nonsulfide removal conditions, <25% of the sulfate was converted at a hydraulic retention time of 24 h reaching volumetric activities of <13 mmol sulfate/l/d. The absence of sulfide removal at a hydraulic retention time of 24 h resulted in an average $H_2S$ concentration of 18.2 mM (584 mg S/I). The incomplete sulfate removal was probably due to sulfide inhibition. Molecular phylogenetic analysis identified 11 separate 16S rRNA bands under sulfide stripping conditions, whereas under nonsulfide removal conditions only 4 separate 16S rRNA bands were found. This shows that a less diverse population was found in the presence of a high sulfide concentration.

• 공업화학
• /
• 제24권3호
• /
• pp.279-284
• /
• 2013

본 연구에서는 음식물류 폐기물 자원화 과정에서 생성되는 고농도 음폐수(food wastewater : FWW)를 대상으로 기존의 혐기성 공정의 대안책으로써 고온호기성 소화공정에 대한 성능을 검증하였고 공정 인자를 도출하였다. 이를 위해 수리학적 체류시간(Hydraulic retention time, HRT) 변화 및 유기물 부하량(Organic loading rate, OLR)에 따른 유기물 제거 효율과 안정성을 관찰하였다. 실험 결과 비교적 짧은 HRT를 가진 R1 (HRT : 5일)의 경우 OLR이 증가할 때, 급격한 pH감소가 일어나 심한 공정 저해를 받는 것으로 관찰되었다. 반면 R2 (HRT : 10일)의 경우에는 상대적으로 안정적인 공정 운전 및 효율적인 COD, 유기산 및 lipid 제거가 일어났다. 이는 상대적으로 긴 HRT로 인한 유기산 축적과 같은 공정저해 요인이 해결되어 상대적으로 높은 유기물 처리효율을 나타낸 것으로 생각된다. R1에서는 COD 부하량이 $18.6kgCOD/m^3d$에서 $28.4kgCOD/m^3d$으로 증가함에 따라 급격한 COD 제거율 감소를 보였다. 반면 R2에서는 각 OLR별로 3.61, 7.05, 9.43 그리고 $12.2kgCOD/m^3d$의 높은 COD 제거율을 보였다. 따라서 본 연구에서는 10일 이상의 HRT에서 고온 호기성 소화가 고농도 음폐수 처리에 탁월한 유기물 제거율을 나타냄을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권4호
• /
• pp.536-542
• /
• 2007

The responses of whole body protein and glucose kinetics and of nitrogen (N) metabolism to non-protein energy intake (NPEI) were determined using an isotope dilution approach and measurement of N balance in three adult male goats. The diets containing 1.0, 1.5 and 2.0 times ME maintenance requirement, with fixed intake of CP (1.5 times maintenance) and percentage of hay (33%), were fed twice daily for each 21 d experimental period. After an adaptation period of 11 d, N balance was determined over 3 d. On day 17, whole body protein synthesis (WBPS) and glucose irreversible loss rate (ILR) were determined during the absorptive state by a primed-continuous infusion of [$^2H_5$]phenylalanine, [$^2H_2$]tyrosine, [$^2H_4$]tyrosine and [$^{13}C_6$]glucose, with simultaneous measurements of plasma concentrations of metabolites and insulin. Ruminal characteristics were also measured at 6 h after feeding over 3 d. Nitrogen retention tended to increase (p<0.10) with increasing NPEI, although digestible N decreased linearly (p<0.05). Increasing NPEI decreased (p<0.01) ammonia N concentration, but increased acetate (p<0.05) and propionate (p<0.05) concentrations in the rumen. Despite decreased plasma urea N concentration (p<0.01), increased plasma tyrosine concentration (p<0.05), and trends toward increased plasma total amino N (p<0.10) and phenylalanine concentrations (p<0.10) were found in response to increasing NPEI. Increasing NPEI increased ILR of both glucose (p<0.01) and phenylalanine (p<0.05), but did not affect ($p{\geq}0.10$) that of tyrosine. Whole body protein synthesis increased (p<0.05) in response to increasing NPEI, resulting from increased utilization rate for protein synthesis (p<0.05) and unchanged hydroxylation rate of phenylalanine ($p{\geq}0.10$). These results suggest that increasing NPEI may enhance WBPS and glucose turnover at the absorptive state and improve the efficiency of digestible N retention in goats, with possibly decreased ammonia and increased amino acid absorption. In addition, simultaneous increases in WBPS and glucose ILR suggest stimulatory effect of glucose availability on WBPS, especially when sufficient amino acid is supplied.

• Environmental Engineering Research
• /
• 제23권1호
• /
• pp.70-75
• /
• 2018

A pilot scale anaerobic fixed-bed with a reactor volume of $2.8m^3$ was built to treat slaughterhouse wastewater. Bamboo rings were chosen as support media mainly because of their cheaper price in underdeveloped countries. Even with their lower porosity and specific surface, the reactor performance showed a maximum 95% COD removal efficiency at an organic loading rate (OLR) of $1kg\;COD/m^3-d$ with its corresponding hydraulic retention time (HRT) of 7.5 d. At a higher OLR of $4.0kg\;COD/m^3-d$, the COD removal efficiency of 75% was achieved with an HRT of 2 d. No big difference in COD removal efficiencies was found between the reactors operated in both upflow and downflow modes. Their operational behavior and effluent characteristics were similar. The effluent COD/TKN ratio of 6.67 at an OLR of $4.0kg\;COD/m^3-d$ was only marginal acceptable range for a subsequent biological denitrification process. Otherwise carbon supplementation is required at a lower OLR.

• Restorative Dentistry and Endodontics
• /
• 제31권4호
• /
• pp.300-311
• /
• 2006

본 연구의 목적은 복합레진을 이용한 비우식성 치경부 5급 병소 수복에 있어서, 3가지 다른 접착제를, 유지구를 부여한 치아와 부여하지 않은 치아에 적용하였을 때의 임상적인 효능의 차이를 비교하기 위함이다. 총 150개의 치아를 각각 25개씩 6개의 군으로 나누었다. A군 : Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4세대 접착제)를 사용하고 유지구를 부여하지 않음. B군 : SBMP 를 사용하고 유지구를 부여. C군 : BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5 세대 접착제)를 사용하고 유지구를 부여하지 않음. D군 : BC Plus를 사용하고 유지구를 부여. E군 : Adper Prompt (3M ESPE, Seefeld, Germany, 6 세대 접착제)를 사용하고 유지구를 부여하지 않음. F군 : Adper Prompt를 사용하고 유지구를 부여. 모든 치아는 복합레진인 Denfil (Vericom Co., Anyang, Gyeonggido, Korea) 을 이용하여 충전하였다. 수복 직후와 수복 6 개월 후에 modified USPHS (United States Public Health Service) criteria에 따라 수복물을 임상적으로 평가하였다. 추가적으로 임상사진을 촬영하였으며, 에폭시 레진을 이용하여 복제한 후 주사전자현미경을 이용하여 이를 관찰하였다. 6개월 후 관찰 결과, alpha rating의 수가 각 실험군마다 동일하지는 않았지만, 통계적으로는 3가지의 접착제간에 유의할만한 차이는 없었고, 기계적인 유지구를 부여한 군과 부여하지 않은 군 간에도 유의할만한 차이는 없었다 (p < 0.05). 그러나 6개월의 관찰 기간은 일반적으로 기대되는 레진의 수명보다 짧기 때문에, 각 실험군 간의 차이를 알아보기 위해서는 추후 더 오랜 기간의 관찰이 요구 된다.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.123-132
• /
• 2000

The field of maxillofacial prosthetics is concerned with the prosthetic reconstruction of missing head and neck tissue. Currently, facial prostheses are usually applied in cases of defects caused by the surgical removal of tumors or congenital defects. While silicone has been most widely used for the reconstruction of missing maxillofacial defects, it does not have ideal physical properties. Therefore, bonding a thin polyurethane sheet to silicone prostheses was recommended. In this case skin adhesives were used for the retention of maxillofacial prostheses. But retention of devices has always been problematic. The contributions of implants can be made to solve these problems. Implants have reduced the need for adhesive use, simplifying cleaning procedures and thus extending the life of the prostheses. For implant-retained prostheses, retentive matrix is necessary to hold attachments and/or magnets. The retentive matrix is usually fabricated with autopolymerizing acrylic resin or visible light- polymerized resin. The purpose of this study was to compare the adhesion-in-peel force of silicone adhesive to autopolymerizing acrylic resin and polyurethane sheet with two different surface textures : pumice polish only or retention groove, and three surface primers : Dow corning 1205 primer or Dow corning S-2260 primer or FactorII A-304 primer, and two polymerization methods : room temperature or dry heat oven. The t-peel bond strength of specimens was determined as described in ASTM Standard D1876-72. The results were statistically analyzed using the ANOVA test, multiple range test and t-test The results were as follows. 1. The t-peel bond strength of A-304 primer was the highest and statistically higher than that of S-2260(p<0.05). 2. The t-peel bond strength of specimens with retention groove was statistically higher than that of specimens polished with pumice(p<0.05). 3. The t-peel bond strength of specimens polymerized in dry heat oven was statistically higher than that of specimens in room temperature(p<0.01).