• Bulletin of the Korean Chemical Society
• /
• v.19 no.4
• /
• pp.466-470
• /
• 1998

Catalytic hydrogenation of carbon dioxide for the simultaneous synthesis of methanol and dimethyl ether (together called oxygenates) over a combination of methanol synthesis and methanol dehydration catalysts has been studied. Various methanol synthesis and methanol dehydration catalysts were examined for this reaction. The addition of promotors like $Ga_2O_3\; and\; Cr_2O_3$ to Cu/ZnO catalyst gave much more enhanced yield on the formation of oxygenates. From the results, the promotional effect of $Cr_2O_3$ has been explained in terms of increase in the intrinsic activity of Cu while that of $Ga_2O_3$ being increase in the dispersion of Cu. Among the methanol dehydration catalysts examined, the solid acids bearing high population of intermediate-strength acid sites were found to be very effective for the production of oxygenates. HY zeolite which contains strong acid sites produce small amount of hydrocarbons as by-products. However, CuNaY zeolite in which the presence of strong acid sites are minimum gives very high oxygenates yield without the formation of hydrocarbons.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.256-264
• /
• 1999

The performance of the Pt-B/cordierite catalysts (2 wt%) Pt, 70 wt% Alumina, 28 wt%) Ceria and Zirconia, B: base metal) loaded with 6∼12 wt% Mn, Cu, V, Co, Cr and Ba, respectively was studied for partial oxidation of methane reaction and compared with that of Ni loaded catalyst. As a results, it was found that Ba, Co, Cr as well as Ni loaded catalysts showed higher activity for methane partial oxidation of methane than the Mn, Cu and V loaded catalyst. But it was known that catalysts having good activity for methane showed the good activity for coke formation, too. A XRD analysis of the catalyst before and after the reaction using 5 wt% Ni/Al$_2$O$_3$) showed that there were three Ni phases. In these results, it was found that methane oxidation reaction occulted at the front of the catalyst bed consisted of NiAl$_2$O$_4$and NiO and reforming reaction occurred at the rear part of the catalyst bed consisted of reduced Ni.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.195-206
• /
• 2009

We investigated natural background and enrichment characteristics and predicted geochemical disaster for stream sediments in the Hamyang-Sancheong area. Stream sediments samples were collected 95 ea in study area. The stream sediments were well known that had not possibility of contamination effect and represented drainage basins. We got the major and hazardous elements concentrations by XRF, ICP-AES and NAA analysis methods. Acid decomposition for the ICP-AES has been used $HClO_4$ and HF with $200^{\circ}C$ heating at 1st and after that $HClO_4$ HF and HCl with $200^{\circ}C$ heating at 2nd stage. We could know the characteristics that concentration of Cu and Co decreased when concentration of $SiO_2$ increased in correlation analysis. The enrichment factor of the stream sediments was below 2 in study area. This result indicated that study area belonged to moderate enrichment. The stream sediments of Hamyang area were enriched in order of Pb>Th>Cr>V>Co>Cu and those of Sancheong area were enriched in order of Pb>Th>Cr>Co>V>Cu. The enrichment factor(E.F.) of the Pb, Cr, Co and V was similar between Hamyang and Sancheong area. The enrichment factor of the Th was higher in Hamyang area and that of the Cu was higher in Sancheong area. The enrichment factor of the Pb was highly enriched in all study area than earth crust mean. But we could know that study area was not exposed to the pollution of the Pb through the tolerable level.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1021-1026
• /
• 2000

The removal of cadmium, copper and chromium ions was carried in a phase transfer reactor using W/O(water in oil) microemulsion containing sodium di[2-ethylhexyl] sulfosuccinate(AOT) and isooctane system. Removal efficiencies and mass transfer rate of $Cd^{2+}$, $Cu^{2+}$ and $Cr^{3+}$ were increasing with increasing pH of aqueous solution. However, $Cr^{6+}$ was not extracted by W/O microemulsion with AOT/isooctane system. It was found that removal of heavy metal ions were required an attractive electrostatic interaction between the metal ions and W/O microemulsion. The relationship between mass transfer rate. Jo of $Cd^{2+}$, $Cu^{2+}$ and $Cr^{3+}$ and pH of aqueous solution by W/O microemulsion suggested.

• Applied Biological Chemistry
• /
• v.33 no.2
• /
• pp.138-142
• /
• 1990

The effects of heavy metals Cd, Cu, Cr, Ni, and Zn on the degradation of the insecticide fenitrothion (O, O-dimethyl O-4-nitro-m-tolyl phosphorothioate), the fungicide IBP (5-benzyl O, O-diisopropyl phosphorothioate), and the herbicide butachlor (N-butoxymetyl-2-chloro-2', 6'-diethylacetanilide) in flooded soils were examined in the laboratory. The degradation of the 3 pesticides in soil was greatly inhibited by the amendment of the 5 heavy metals. The inhibition rate was high in the order of butachlor>IBP>fenitrothion. Populations of fenitrothion-and butachlor-degrading microbes, which were counted by the MPN method, were lower in heavy metals added soil than in the control soil. The effect of heavy metals on the degradation of the 3 pesticides in soil varied with the kind and concentration of heavy metals and the kind of pesticides.

• 보존과학연구
• /
• s.34
• /
• pp.102-108
• /
• 2013

The purpose of this investigation is to Dancheong documentary project of Tangible cultural in Jeollabukdo. The colored pigments of Nahanjeon Hall in Songkwangsa Temple analyzed and composition and repair period for each pigments were compared. The result are that blue color is Ultramarine blue($Na_6Al_6Si_6O_{24}S_4$), green color is Yangrok($Cu(C_2H_3O_2)_2{\cdot}3Cu(AsO_2)_3$), orange color is Jangdan($Pb_3O_4$), yellow color is Chrome yellow($PbCrO_4$). It is difficult to distinguishable from coloring period by analysis of pigments of Nahanjeon Hall.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.1
• /
• pp.37-47
• /
• 2018

Volcanic ash samples of historical eruptions from Mt. Baekdu were analyzed for major oxides, trace and rare earth elements by a variety of analytical techniques. The results indicate that the ashes consist of approximately 58.8~71.1 wt.% $SiO_2$, 9.6~16.8 wt.% $Al_2O_3$, 4.5~6.9 wt.% $Fe_2O_{3t}$, 0.1~1.7 wt.% MgO, 0.3~1.6 wt.% CaO, 5.2~6.3 wt.% $Na_2O$, 4.3~5.9 wt.% $K_2O$ and less than 1.2 wt.% $TiO_2$. Thirty two trace metals including Ba, Cu, Cr. Co, Ni, Sr, V, Zn, and Zr were analyzed. The ashes can be divided two groups: group A(1 ka Millennium pumice, 1668 and $190{\underline{3}}$ pumice) and group B(1702 pumice) according to the relative enrichment of HREEs. The abundances of heavy metals such as Cu, Co, Mn, and Zn were relatively low. As compared to the Sakurajima volcanic ash, Baekdusan volcanic ash has low concentrations of Y, Nb, Pb, U, Sc, V, Ni and Cu and high concentrations of Zr, Ba, Hf, Cr, Co, Zn and rare-earth (except Eu).

• Journal of Surface Science and Engineering
• /
• v.26 no.6
• /
• pp.327-333
• /
• 1993

The effect of heat treatment on the adhesion between Cu-18wt% Cr film and polyimide has been studied by using T-peel test, AES, and XRD. Cu-18wt% Cr alloy and pure Cu films were sputter deposited onto pol-yimide. Cu was electroplated before and after heat treatment at $400^{\circ}C$ for 0.5 hr and 2 hrs respectively. The adhesion of metal film onto polyimide was considerably good before heat treatment, but heat treatment re-duced the peel adhesion strength in all specimens. The reduction in adhesion in adhesion strength values in the specimens which were plated after heat treatment was mainly due to Cr-O rich pahse formed in the metal/polyimide in-terface. In the specimens which were heat treated after plating, the enhanced ductility in the metal films con-tributes the peel adhesion strength by increasing the amount of deformation in metal strips.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.119-120
• /
• 2011

Kawazoe는 1997년 p-type TOS를 만들기 위해서는 3가지가 충족되어야 한다고 언급한바 있다. 첫 번째, 가시광영역에서 투명하기 위해서 cation의 d10s0이 가득 차야 한다. 가득 차지 않은 d10 shell은 광 흡수가 가능하여 투과도를 떨어뜨린다. N-type을 예로 들어 ZnO, TiO, In2O3가 각각 Zn2+, Ti4+, In3+가 되어 d shell을 가득 차게 만드는 것을 볼 수 있다. 두 번째, cation d10s0 shell은 산소의 2p shell과 overlap 되어야 한다. 이 valence band는 홀 전도를 더욱 좋게 한다. 예를 들어 Cu1+(3d), Ag1+(4d)가 해당한다. 세 번째로, 양이온과 산소간의 공유결합을 강하게 하기 위해서 결정학적 구조는 매우 중요하다. Delafossite 구조는 산소가 pseudo-tetrahedral 구조로서 공유결합에 유리하다. 이러한 환경은 O2- (2p6)을 형성하고 홀의 이동도를 증가시킨다. 예를 들어 Cu2O의 경우 앞의 2가지를 만족시키지만 광학적 특성에서 좋지 않다. 그 이유가 3번째 언급한 결정학적인 요인에 있다. 결정 계의 환경은 Cu2O를 따라가면서 3차원적인 연결을 2차원적으로 변형된 delafossite 구조에서는 quantum well이 형성되어 band gap이 커진다. 본 연구에서는 전기적 이방성을 가지고 있는 delafossite CuCrO2 상에서 우선배향을 일으키는 인자 중 기판을 변화시켜 실험을 진행하였다. 결과적으로 기판변화를 통해 우선배향조절이 가능하였으며 CuCrO2 박막을 시켰으며, 결정방향에 따른 전기적 물성의 이방성에 관한 연구는 계속 진행 중에 있다. c-plane sapphire 기판위에는 [00l]로 성장하는 반면, c-plane STO 기판 위에는 [015] 방향으로 성장하는 것을 확인하였다. 이러한 원인은 기판과 증착되는 박막간의 mismatch를 최소화 하여 strain을 줄이고, 계면에서의 Broken boning 수를 줄여 계면에너지를 낮추는 방법이기 때문일 것으로 예상된다. C-plane sapphire 기판위에 증착될 경우 증착온도가 증가함에 따라 c-축으로의 성장이 온전해지며 이에 따라 캐리어농도의 감소와 모빌리티의 증가가 급격하게 변하는 것을 확인할 수 있다. 반면 c-plane STO 기판에서는 증착온도에 따른 박막의 배향변화가 없으며 전기적 물성 변화 또한 비교적 작은 것을 간접적으로 확인하였다.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.3-9
• /
• 2007

Although the ferrous material was separated by the magnetic separation before the incineration process, the municipal solid waste incineration bottom ash generated during incinerator in metropolitan area consists of many iron products which account for about $3{\sim}11%$ as well as ceramics and glasses. The formation of $NiFe_2O_4$ and $FeCr_2O_4$ with a $Fe_3O_4-Fe_2O_3$ (similar to pure Fe) on the surface of iron product was found during air-annealing in the incinerator at $1000^{\circ}C$, because Ni and Cr has a chemical attraction about iron is using to coat with Ni and Cr metals for poish or to prevent corrosion. Therefore, Fe-Ni Cr oxide can be formed on durface of the iron product and it can be separated from bottom ash through the magnetic separation. So, in this study, the separation ratio of heavy metals as magnetic separation and mineralogical formation of Fe-ion(heavy metal) in ferrous metals corroded were investigated. As the result, the separation ratio of Ni and Cr based on particle sizes accounted for about $45{\sim}50%$, and Cu and Pb accounted for below 20%. Also, the leaching concentration of Ni and Cr in bottom ash separated by magnetic separation was lower than that in fresh bottom ash.