• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.305-313
• /
• 2010

Mineralogical characteristics of Cu-Co ores from the Central African Copperbelt in the Democratic Repblic of Congo are studied using powder X-ray diffractometer, general area detector X-ray diffractometer, and electron proble microanalyzer. Black ores are mainly composed of heterogenite (cobalt oxide/hydroxide mineral) and malachite (copper carbonate mineral), whereas green ores are only composed of malachite. Heterogenite shows very bright white color under the reflected microscope, and belongs to 3R polytype, because it has d-spacings at $4.39{\AA}$ and $2.316{\AA}$. Since NiO and $Fe_20_3$ content of heterogenite are lower than those of 3R polytype from other localities, it cannot completely exclude the presence of 2H polytype in heterogenite from this study. Malachite is light grey color under the reflected microscope with approximate chemical formula of $Cu_{1.97}Co_{0.02}Fe^{2+}{_{0.01}}CO_3(OH)_2$. Heterogenite and malachite were probably formed at the supergene emichment stage, the last mineralization stage in the Central African Copperbelt. Cobalt seems to be much more emiched in the black supergene (oxy)hydroxide ore than those in the primary sulfide ore.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.147-150
• /
• 2011

A copper-based metal organic framework (MOF) named Cu-BTC, also known as HKUST-1, was successfully synthesized by using a solvothermal method. The properties of the Cu-BTC sample were characterized with Powder X-ray diffraction (XRD) for phase structure, Thermogravimetric analysis (TGA) for thermal stability, Scanning electron microscopy (SEM) for crystal structure, and Nitrogen adsorption-desorption for pore textural structure. The analysis results displayed that the Cu-BTC sample exhibited a good crystal structure with uniform size of octahedral particles. The BET data revealed a high surface area of $1457 \;m^2g^{-1}$ and a pore volume of $0.60\; cm^3g^{-1}$. The Cu-BTCs ample was also studied for $CO_2$ adsorption and exhibited a maximum $CO_2$ adsorption capacity of 170 mg/g of the sorbent (3.8 mol/kg) at $25^{\circ}C$.

• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.36-43
• /
• 2004

The effect of bath composition, plating condition and plating rate on the magnetic property of electroless Co-Cu-P deposits were investigated. With increasing $CuCl_2$ concentration in the bath, plating rate increased, while the Br value of deposit decreased sharply. Deposited surface were inferiority by the increase pH above 10.5, bath temperature higher than $80^{\circ}C$. Plating reaction had been ceased by the increase of pH above 11, bath temperature higher than $90^{\circ}C$ and under $40^{\circ}C$. The Br value of deposit was uniform with various concentration of complexing agent(sodium citrate) in the bath. The Br value of deposit was almost equal to that found by the addition of stabilizer (thiourea) and accelerator(NaF). The Br value of deposit was uniform in plating time(20min) and heat treatment temperature(below $200^{\circ}C$), and were confirmed to have adequate bath stability for practical use.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1135-1138
• /
• 2002

CuO/ZnO, CuO/SiO,sub>2, and CuO/ZrO2 catalysts were prepared for investigating the support effects on methanol dehydrogenation. It was found that the conversion of methanol was proportional to the copper surface area on Cu/ZnO cat alysts and was independent on that on Cu/ZrO2 and Cu/SiO2. The highest copper surface area was obtained with the Cu/ZrO2 (9/1). The unusual deactivation of the Cu/ZnO, which showed the highest selectivity among the catalysts tested, was observed. Pulse reaction with methanol indicated that the lattice oxygen in ZnO could be removed by forming CO2 in the catalytic reaction, supporting that the ZnO reduction was responsible for the severe deactivation of the Cu/ZnO.

• Journal of Hydrogen and New Energy
• /
• v.30 no.2
• /
• pp.103-110
• /
• 2019

Cu-Zn-Al catalysts were prepared via co-precipitation method for low-temperature water-gas shift (LT-WGS) reaction under practical reaction condition. Aging time was systematically changed to find optimum point for LT-WGS under practical condition. The Cu-Zn-Al catalyst aged for 72 hours showed the highest CO conversion within low-temperature range as well as very stable catalytic activity for 200 hours despite the practical reaction condition.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.410-414
• /
• 2019

The hydrogen reduction behavior of the $CuO-SCo_3O_4$ powder mixture for the synthesis of the homogeneous Cu-15at%Co composite powder has been investigated. The composite powder is prepared by ball milling the oxide powders, followed by a hydrogen reduction process. The reduction behavior of the ball-milled powder mixture is analyzed by X-ray diffraction (XRD) and temperature-programmed reduction at different heating rates in an Ar-10%H2 atmosphere. The scanning electron microscopy and XRD results reveal that the hydrogen-reduced powder mixture is composed of fine agglomerates of nanosized Cu and Co particles. The hydrogen reduction kinetics is studied by determining the degree of peak shift as a function of the heating rate. The activation energies for the reduction of the oxide powders estimated from the slopes of the Kissinger plots are 58.1 kJ/mol and 65.8 kJ/mol, depending on the reduction reaction: CuO to Cu and $SCo_3O_4$ to Co, respectively. The measured temperature and activation energy for the reduction of $SCo_3O_4$ are explained on the basis of the effect of pre-reduced Cu particles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.178.2-178.2
• /
• 2015

In and Ga doped ZnO (IGZO) films were deposited on 5 nm thick Cu film buffered Polycarbonate (PC) substrates with RF magnetron sputtering and then the effect of Cu buffer layer on the optical and electrical properties of the films was investigated. While IGZO single layer films show the electrical resistivity of $1.2{\times}10-1{\Omega}cm$, IGZO/Cu bi-layered films show a lower resistivity of $1.6{\times}10-3{\Omega}cm$. Although the optical transmittance of the films in a visible wave length range is deteriorated by Cu buffer layer, IGZO films with 5 nm thick Cu buffer layer show the higher figure of merit of $2.6{\times}10-4{\Omega}-1$ than that of the IGZO single layer films due to the enhanced opto-electrical performance of the IGZO/Cu bi-layered films.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1241-1246
• /
• 2010

Ternary Cu/ZnO/$Al_2O_3$ catalysts were prepared by a co-precipitation method. The precursor structures were monitored during the aging. The first precipitate structure was amorphous georgeite, which transformed into the unknown crystalline structure. The transition crystalline structure was assigned to the crystalline georgeite, which was suggested with elemental analysis, IR and XRD. The final structure of precursors was malachite. The Cu surface area of the resulting Cu/ZnO/$Al_2O_3$ was maximized to be 30.6 $m^2$/g at the aging time of 36 h. The further aging rapidly decreased Cu surface areas of Cu/ZnO/$Al_2O_3$. ZnO characteristic peaks in oxide samples almost disappeared after 24 h aging, indicating that ZnO was dispersed in around bulk CuO. TOF of the prepared catalysts of the Cu surface area ranges from 13.0 to 30.6 $m^2/g_{cat}$ was to be 2.67 ${\pm}$ 0.27 mmol/$m^2$.h in methanol synthesis at the condition of $250^{\circ}C$, 50 atm and 12,000 mL/$g_{cat}$. h irrespective of the XRD and TPR patterns of CuO and ZnO structure in CuO/ZnO/$Al_2O_3$. The pH of the precipitate solution during the aging time can be maintained at 7 by $CO_2$ bubbling into the precipitate solution. Then, the decrease of Cu surface area by a long aging time can be prevented and minimize the aging time to get the highest Cu surface area.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.584-590
• /
• 1982

Copolymerization of the 4-vinylpyridine with vinylacetate and divinylbenzene initiated by azobis-isobutyronitrile was carried out in DMF in presence $BaCl_2$ at $98^{\circ}C$. Ion exchange res in, poly 4-vinylpyridine-vinylsulfonic acid-divinylbenzene was prepared by sulfonation of 4-vinylpyridine-vinylacetatp-divinylbenzene with concentrated sulfuric acid. The compositions of each synthetic resin were identified by means of ir adsorption spectroscopy. Anion and cation capacities of 4-vinylpyridine-vinylsulfonic acid-divinylbenzene ion exchanger were 2.5meq/g and 4.8meq/g, respectively. Adsorption of Cd(II) and Cu(II) ions have showed larger quantity in alkalie media. A study also was made of the influence of alcohol on the distribution coefficient of Cd(II) and Cu(II) ions between the synthetic ion exchanger, and solution containing hydrochloric acid, various alcohols and water. The distribution coefficients of metal ions decrease generally as the number of branches of carbon in the molecule of butyl alcohol increase. (t-BuOH

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.693-703
• /
• 2009

The complex formation of anti-inflamatory drug piroxicam (PX, 4-hydroxy-2-methyl-N-2--pridyl-2H-1,2-benzothiazine-3-carboxadiamide-1,1-dioxide) with transition metal ions Co(II), Ni(II), Cu(II) and Zn(II) in methanol(MeOH)/water binary mixtures were studied by spectrophotometric method at 25$^{\circ}C$, constant pH = 5.0 and I = 0.1 M. The computer program SQUAD was used to extract the desired information from the spectral data. The outputs of the fitting processes were stability constants, standard deviations of the estimated stability constants, concentration distribution diagrams and spectral profiles of all species. The sequence of the stability constants of PX complexes with Co(II), Ni(II), Cu(II) and Zn(II) follow the Cu(II) > Co(II) > Ni(II) ${\approx}$ Zn(II) order. This may be due to different geometry tendencies of these metal ions. The acidity constants of the PX were also determined under above condition from its absorption spectra at different pH values. The computer program DATAN was used for determination of acidity constants of PX. The validity of the obtained acidity constants was checked by a well known computer program SPECFIT/32. The effects of the different parameters like solvent nature, cations characteristics on the stability and acidity constants were thoroughly discussed.