• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.13-19
• /
• 1975

A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.3
• /
• pp.113-118
• /
• 2022

In this study, the effect of polyethylene glycol (PEG) on Cu electrodeposition was analyzed using cyclic voltammetry. The adsorption of PEG was affected by the specific adsorption of sulfate ion (SO₄^2-) or chloride ion (Cl^-). In SO₄^2--based plating solution, the adsorption of PEG was limited by the adsorbed SO₄^2-. Accordingly, the adsorbed PEG could suppress the electron transfer for Cu electrodeposition, but its effect was not significant. Meanwhile, in the plating solution composed of perchlorate ion (ClO₄^-) which does not specifically adsorb on Cu surface, a strong suppression effect of PEG was observed and it was proportional to the molecular weight of PEG. On the other hand, when Cl^- was specifically adsorbed on Cu surface, the suppression effect of PEG was enhanced because PEG and Cl^- formed an interrelated adsorbate. The synergetic effect of PEG and Cl^- depended on the composition of the plating solution, which means that the synergy between PEG and Cl^- is based on the physical interaction. For example, the hydrophobicity of PEG plays an important role in the interaction, as the suppression effect of PEG derivative having a hydrocarbon tail was further enhanced with the addition of Cl^-.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.180-185
• /
• 2004

The electromagnetic properties and microstructures of the basic composition of (Ni$\sub$0.2/Cu$\sub$0.1/Zn$\sub$0.2/)$\sub$0.5/ (Fe$_2$O$_3$)$\sub$0.5/ were invested by changing of SO$_4$, Cl and NO$_3$ series. We were prepared by coprecipitation method and sintered at temperatures 950$^{\circ}C$, 1150$^{\circ}C$, l350$^{\circ}C$, respectively. When sintering at temperature 950$^{\circ}C$, Cl and NO$_3$ series became perfection sintering. On the other hand, SO$_4$ series showed perfection sintering at temperature 1150$^{\circ}C$. According to particle size analysis result, higher magnetic permeability and magnetization value were observed by Cl series than SO$_4$ or NO$_3$ series.

• Korean Journal of Crystallography
• /
• v.9 no.1
• /
• pp.6-10
• /
• 1998

The complex[Cu(L)](ClO4)2 (1) (L:3,5,10,12-Tetramethyl-1,4,8,11-tetraazacyclotetradecane) has been synthesized and structurally characterized. The complex 1 crystallizes in the monoclinic system, space group P21/n with cell parameters a=8.208(2)Å, b=13.339(6) Å, c=10.752(5) Å, β=111.02(4)˚ Z=2. Least-squares refinement of 1 led to a R(RW)factor of 0.073 (0.142) for 617 observed reflections of F0>40(F0). The crystal structure of 1 has a square-planar geometry and adopts the trans-III conformation.

• Clean Technology
• /
• v.28 no.1
• /
• pp.38-45
• /
• 2022

CuCl₂-loaded V₂O₅-WO₃/TiO₂ catalyst showed excellent activity in the catalytic oxidation of elemental mercury to oxidized mercury even under SCR condition in the presence of NH₃, which is well known to significantly inhibit the oxidation activity of elemental mercury by HCl. Moreover, it was confirmed that, when SO₂ was present in the reaction gas together with HCl, excellent elemental mercury oxidation activity was maintained even though CuCl₂ supported on the catalyst surface was converted to CuSO₄. This is thought to be because not only HCl but also the SO₄ component generated on the catalyst surface promotes the oxidation of elemental mercury. However, in the presence of SO₂, the total mercury balance before and after the catalytic reaction was not matched, especially as the concentration of SO₂ increased. In order to understand the cause of this, further studies are needed to investigate the effect of SO₂ in the SnCl₂ aqueous solution employed for mercury species analysis and the effect of sulfate ions generated on elemental mercury oxidation. It was confirmed that SO₂ also promotes NO_x removal activity, which is thought to be because the increase in acid sites by SO₄ generated on the catalyst surface by SO₂ facilitates NH₃ adsorption. The composition change and structure of the components present on the catalyst surface under various reaction conditions were measured by XRD and XRF. These measurement results were presented as a rational explanation for the results that SO₂ enhances the oxidation activity of elemental mercury and the NO_x removal activity in this catalyst system.

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.126-135
• /
• 1988

Acrylonitrile-Acrylic acid 공중합체와 이를 amidation시킬 공중합체에 구리착물을 형성시켜 IR spectrum분석, 점도측정, 전자현미경관찰, 열분석, 전기전도성등을 검토하였다. AN-AA 공중합체-Cu(II)와 아미드화 AN-AA 공중합체-Cu(II)착물은 pH9의 범위에서 가장 안정한 값을 가지며 착물이 형성되거나 Cu$_{x}$S가 도입된 공중합체는 그 구조가 ompact해짐을 알 수 있었다. 공중합체에 Cu(II)착물이 형성되면 열안정성이 감소되며 Cu(II)착물은 아세톤 용액에서 요오드로 dope 될 때 저항값이 $10^{5}$-$10^{6}$.OMEGA..cm를 나타냈다. 저항값은 CuCl$_{2}$와 I$_{2}$의 양에 영향을 받으며 20wt% 이상의 CuCl$_{2}$와 1.0wt% I$_{2}$로 처리하였을 때 반도체영역의 저항값을 보였다. 또 Cu$_{x}$S를 도입할 경우 CuSO$_{4}$의 농도가 30g/l로, 3시간 반응시켰을 때 가장 만족스러운 전도도값을 나타냈다. 공중합체-Cu(II)보다 구리이온을 도입한 Cu$_{x}$S공중합체의 전도도값이 $10^{4}$정도로서 공중합체-Cu(II)보다 높은 전도성을 나타냈다.다.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.153-157
• /
• 2016

In this study, three different metal-containing ionic liquid catalysts were prepared by metal insertion and characterized by various physicochemical analytic methods. The catalytic performance of the metal containing ionic liquids in the cycloaddition of $CO_2$ with propylene oxide (PO) to produce propylene carbonate (PC) was investigated under the solvent free condition. The order of approximate rate constants ($K_{app}$) for the metal containing ionic liquid catalysts was $(MeIm)_2ZnCl_2$, > $(MeIm)_2FeCl_2$ > $(MeIm)_2CuCl_2$. These results are in accord with the experimentally obtained activity order of the different metal containing ionic liquid catalysts.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.129-133
• /
• 2014

BACKGROUND: This study was performed for selecting yeast mutants with a high tolerance for targeted metals, and determining whether yeasts strains tolerant to multiple heavy metals could be induced by sequential adaptations. METHODS AND RESULTS: A mutant yeast strain tolerant to the heavy metals cadmium (Cd), copper (Cu), nickel (Ni), and zinc (Zn) was selected by sequential elevated exposures to each metal with intermittent mutant isolation steps. A Cd-tolerant mutant was isolated by growing yeast cells in media containing $CdCl_2$ concentrations that were gradually increased to 1 mM. Then the Cd-tolerant mutant was gradually exposed to increasing levels of $CuCl_2$ in growth media until a concentration of 7 mM was reached, thus generating a strain tolerant to both Cd and Cu. In the subsequent steps, this mutant was exposed to $NiCl_2$ (up to 8 mM), and a resultant isolate was further exposed to $ZnCl_2$ (up to 60 mM), allowing the derivation of a yeast mutant that was simultaneously tolerant to Cd, Cu, Ni, and Zn. CONCLUSION: This method of inducing tolerance to multiple targeted heavy metals in yeast will be useful in the bioremediation of heavy metals.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.406-412
• /
• 2007

The formation of inclusion complexes between ${\beta}$-cyclodextrin and diethylenetriamine substituted-pyridine copper(II) perchlorate; [Cu(dien)(sub-py)] $(ClO_4)_2$, were studied by spectrophotometric methods. On account of charge-transfer band(MLCT) and $^2T_2{\rightarrow}^2E$, the two high peaks were observed as an inclusion complex for the [${\beta}$-CD]$[Cu(dien)(p-Cl-py)]^{2+}$ in the ultraviolet region of the spectrum. The ${\beta}$-CD and $[Cu(dien)(sub-py)]^{2+}$ ion formed a 1:1 complex, and the formation constants were decreased with the increasing temperatures, due to weak binding energy between ${\beta}$-CD and $[Cu(dien)(sub-py)]^{2+}$ ion. This reaction was controlled by enthalpy. In a correlation of the Hammett substituent constants and formation constants for the reaction, formation constants were increased by strong binding energy in the inclusion complexes when electron donating groups were substituted in pyridine ring.

• Journal of the Korean Chemical Society
• /
• v.37 no.9
• /
• pp.849-852
• /
• 1993