• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.190-194
• /
• 2016

Tricyclopentadiene (TCPD) is one of the important precursors for making tetrahydrotricyclopentadiene, which is well known as a next-generation fuel with high energy density. In this study, TCPD was obtained by polymerization reaction of dicyclopentadiene (DCPD) using an ionic liquid (IL) supported mesoporous silica catalysts. ILs were supported to two kinds of mesoporous silica catalysts with different pore sizes such as MCM-41 and SBA-15. Four different ILs were supported to mesoporous silicas using anionic precursors such as CuCl or $FeCl_3$ and cationic precursors such as triethylamine hydrochloride or 1-butyl-3-methylimidazolium chloride. We proved that IL supported mesoporous silicas showed better catalytic performance than those of using non-supported prestine IL in the aspect of TCPD yield and DCPD conversion. Among four kinds of IL supported mesoporous silica catalysts, CuCl-based IL supported MCM-41 system showed the highest TCPD yield.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.308-313
• /
• 2019

In this study, the Fe₃O₄/porous carbon composite was synthesized by hydrothermal method for removal of Cu²⁺ ions and the characteristic of Cu²⁺ ions removal was performed. The Fe₃O₄/porous carbon composite was investigated via using SEM, XRD for its morphology and structure. BET analysis was conducted to conform a specific area and pore size distribution of the composite. For the investigation of the performance for removal of Cu²⁺ ions in the solution, UV-vis spectrometer was used. It suggests that a synergetic effect between magnetic Fe₃O₄ and porous carbon shows an improvement for removal of Cu²⁺ ions.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.12-17
• /
• 2002

Solvent extraction experiments have been performed to separate copper from $CuCl_2$-$NiCl_2$-$CoCl_2$$ solutions using Alamine336 and LIX84. The complex formation tendency between metal ions and chloride ion had a great effect on the distribution coefficients of Cu, Co and Ni ions and separation factor of Cu to Co and Ni. In the experimental ranges of chloride ion concentration from 0.5 to 4.0 M, LIX84 was superior to Alamine336 in separating copper from cobalt. When the volume percentage of LIX84 and Alamine336 was varied from 5 to 40%, LIX84 was more effective than Alamine336 in separating Cu from Co and Ni in solutions in which the chloride ion concentration was 1.0 M.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.299-304
• /
• 1995

The adsorption behaviors of Ba(II), Cr(II), Fe(II) and Cu(II) on the N, N'-bispalmtoyl 1, 12-diaza-3, 4:9, 10-dibenzo-5, 8-cyclopentadecane (hexadecyl $NtnOenH_4$)-octadecylsilanized silicas(ODS) were investigated with water as the mobile phase. Binding constants for metal ions were measured in aqueous solution. The order of binding constants(K) and the degree of sorption(E) were Ba(II)$NtnOenH_4$-octadecyisiianized silicas(ODS) increased with concentration of metal ions, and the degree of adsorption was found to be affected by the cation-chelation mechanism. The experimental results showed good efficiency for separation of Cu(II) from mixtures of Ba(II), Cr(II), Fe(II) and Cu(II) in aqueous solution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.156-159
• /
• 2002

Ion exchange is the most reliable process to remove the ionic impurities and the economic operation. ion exchange is widely used in water and wastewater treatment, especially softening and demineralization. ion selectivity depends on the hydrated radius, charge of ions and concentration. The objective of this study was to determine the selectivity order of cations with equilibrium and column ion exchanges and to investigate the effect of the background anion on selectivity. Cation selectivity increases with decreasing concentration and increasing charge ( $H^+$ < $K^+$ << $Cu^{2+}$ < $Co^{2+}$ < TEX>$Ca^{2+}$ << $Ce^{3+}$)in equilibrium and column cation adsorptions.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.735-742
• /
• 2009

The bone of spinal animals has a hydroxylapatite ($Ca_{10}(PO_4)_6(OH)_2$, HAp) structure which is well known as an excellent inorganic ion exchanger for various heavy metal ions in solutions. In this study, the reusability of cow-bone, pig-bone and fish-bone as a potential material for the removal of heavy metals in solutions was evaluated from the removal of Cu(II) ion in batch tests. The surface properties of three bones, calcined at different temperatures, were measured with SEM, XRD, FT-IR analyses. From the SEM analysis, a clear development of heterogeneity as well as pores having small diameter was observed as the calcination temperature increased. The results of X-ray diffraction analysis showed well developed crystallinity on the surface of calcined bones obtained at higher temperatures, suggesting a transform of amorphous type to crystalline type. Fourier transform infrared (FT-IR) analysis showed disappearance of water molecule on the surface of HAp and organic functional groups of the HAp with increasing the calcination temperatures. Cu(II) removal in the control test was below 15%. By the way, additional 40% increase of Cu(II) removal was observed in the presence of calcined bones. For three bones, Cu(II) removal was decreased as the calcined temperature increased. Cu(II) removal was increased as the solution pH increased due to a favorable condition for the cation exchange as well as precipitation.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.292-296
• /
• 1998

The elution behavior of copper(Ⅱ) and iron(Ⅱ) ions by phenol sulfonic acid(PSA) as an eluent on chelating resin, Amberlite IRC-718 have been investigated. When copper(Ⅱ) and iron(Ⅱ) solutions were adsorbed on the resin and eluted with various concentration of PSA, two peaks of each ion were appeared in the elution curve. These two peak areas were changed according to the PSA concentration. Using these phenomena, the stability constants of complex formation between the two ions and PSA were calculated. The values are 7.0 for copper(II) and $4.5{\times}10^4$ for iron(II), respectively.

• Journal of the Korean Chemical Society
• /
• v.46 no.6
• /
• pp.502-508
• /
• 2002

We have used PET chemosensors in the determination of N-carbamoylglycine. When N-carbam-oylglycine reacts with complex already made by the fluorophore and metal ion, the luminescence intensity can be changed and this phenomenon can be utilized in quantification. We used three metal ions, $Zn^{2+}$, $Ni^{2+}$, $Cu^{2+}$ and in order to investigate selectivity an acetic acid was used. $Ni^{2+}$ ion showed change in the eT mechanism by the anions. $Cu^{2+}$ ion showed the ability to distinguish N-carbamoylglycine from an acetic acid and it is noteworthy that $Zn^{2+}$ ion can change luminescence sensitively according to concentration.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.167-171
• /
• 1999

An investigation of the interaction of Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II) and Ag(I) with two N,N'-dibenzylated nitrogen-oxygen mixed donor macrocyclic ligands, has been carried out. Tle log K values for the respective complexes in 95% methanol have been determined potentiometrically. Both ligands have formed stable complex with only Cu(II) and Ag(I) ion. Transport measurements in a bulk liquid membrane system exhibited a very high selectivity of Ag(I) ion over the other metal ions used.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.251-257
• /
• 1996

The present paper represents the results of development and first experimental tests of a new ionized cluster beam (ICB) source. The novelty of ICB source lies in the fact that the crucible and ionization parts are spaced in one cylindrical shell but are not divided in an electric circuit. The ICB source adapts permanent magnets to increase the ionization efficiency. The maximum obtained $Cu^+$ ion current denisity is $1.5{\mu}A/\textrm{cm}^2$, therewith the ionization rate amounts 3% under deposition rate is 0.2$\AA$/s and the acceleration voltage is 4 kV, the $Cu^+$ ion beam uniformity is better than 95%.