• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.231-243
• /
• 2004

Sequential extraction was carried out on twenty two subsamples of three ferromanganese crusts from three seamounts (Lemkein, Lomilik, and Litakpooki) near the Marshall Islands in the western Pacific. The extraction was designed to fractionate Fe-Mn crust forming elements into low defined groups: (1) exchangeable and carbornate, (2) Mn-oxide, (3) Fe-oxyhyd.oxide, and (4) residual fraction. X-ray diffraction result shows that target material were well removed by each extraction step except for CFA in phosphatized crusts generation. According to chemical analysis of each leachate, most of elements in the Fe-Mn crusts are bound with two major phases. Mn, Ba, Co, Ni, Zn, (Fe, Sr, Cu, and V) are strongly bounded with Mn-oxide $({\delta}-MnO_2)$ phase, whereas Fe, Ti, Zr, Mo, Pb, Al, Cu,(V, P, and Zn) show chemical affinity with Fe-oxyhydroxide phase. This result indicates that significant amount of Al, Ti, and Zr can not be explained by detrital origin. Ca, Mg, K, and Sr mainly occur as exchangeable elements and/or carbonate phase. Outermost layer 1 and inner layer 2 which are both young crusts generations are similar in chemical speciations of elements. However, some of Fe-oxyhydroxide bounded elements (Pb, Y, Mo, Ba, Al, and V) in phosphatized innermost layer 3 are released during phosphatization and incorporated into phosphate (Pb, Y, Mo, and Ba) or Mn-oxide phase (Al and V). Our sequential extraction results reveal that chemical speciations of elements in the hydrogenetic crusts are more or less different from interelemental relationship calculated by statistical method based on bulk chemistry.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.119-126
• /
• 1979

Rice seeds, suweon 264, were germinated under 5 levels of toxic heavy metals, Cd(0, 0.05, 0.5, 5, 20ppm), Cu(0, 0.05, 0.5, 5, 20, ppm), Cr(0, 0.5, 1, 5, 10ppm), Ni(0, 0.5, 1, 5, 10ppm), Co(0, 0.5, 1, 5, 10ppm), Zn(0, 0.5, 5, 20, 40, ppm), Pb(0, 0.5, 5, 20, 40ppm) and Mn(0, 1, 10, 25, 50, ppm) in culture solution, and then grown with supplying culture solution contained respective concentrations. Germination and growth response to the toxic heavy metals were studied. Results obtained are as follows : 1) The germination injury of rice seeds by excess concentration of toxic heave metal in culture solution occured in Cd and Cu; below 0.05 ppm, Ni; below 0.5 ppm, Mn; below 1.0 ppm, Co and Cr; 0.5-1.0 ppm, and 0.5-5 ppm, Zn and Pb. Thereby, in the order of degrees of the elements toxicity to germination, they were arranged as follows : Cd>Cu>Ni>Co>Cr>Mn>Zn$$\geq_-$$Pb. 2) Toxic heavy metal concentrations in culture solution, which result in decreasing dry weight due to the injury of excess concentration of treated elements, were Cd: below 0.05 ppm, Ni, Cr and Co; below 0.5 ppm, Cu and Zn; 0.5-5 ppm, Pb; 5-20 ppm and Mn; 10-25 ppm. The order was Ni>Cd>Cr>Co>Cu$$\geq_-$$Zn>Pb>Mn. 3) The critical contents of Cd, Ni, Pb, Cu, Zn, Mn, and Co in dry matter, Which result in decreasing dry weight, were considered to be 0.05-15.5, 1.50-25.0, 24.0-28.0, 26.5-62.5, 470-645.0, 231.0-500.0 and below 15.0 ppm, respectively. 4) The contents of Cr, Co, Cd, Pb, Ni, Cu and Zn in dry matter by 0.5 ppm treatment concentration of each heavy metals was trace, 15.0, 17.5, 24.0, 25.0, 84.5 and 470.0 ppm, respectively. Thereby, in the order of each element to uptaked by rice seedlings, they were arranged as follow; Zn>Cu>Ni>Pb>Cd>Co>Cr. 5) The hazardous concentrations of root activity by toxic heavy metals in culture solution were Cd; below 0.05, Cu; 0.05-0.5, Cr; below 0.5, Ni; 0.5-1.0, Co; 0.5-1.0, Zn; above 0.5, Pb; 0.5-5.0 and Mn; 1.0-10.0 ppm. The hazardous degree of root activity by toxic heave metals was in the order of Cd>Cu>Cr>Zn>Ni>Co>Pb>Mn.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.100-105
• /
• 2021

Recently, all-solid-state batteries have attracted much attention to improve safety of rechargeable lithium batteries, but the solid-state batteries of conductive ceramics or solid polymer electrolytes show poor electrochemical properties because of several problems such as high interfacial resistance and undesired reactions. To solve the problems of the reported all-solid-state batteries, a hybrid solid electrolyte is suggested, in this study, NASICON-type nanoparticle Li_1.5Al_0.5Ti_1.5P₃O₁₂ (LATP) conductive ceramic, PVdF-HFP, and a carbonate-based liquid electrolyte were composited to prepare a quasi-solid electrolyte. The hybrid solid electrolyte has a high voltage stability of 5.6 V and shows an suppress effect of lithium dendrite growth in the stripping-plating test. The LiNi_0.83Co_0.11Mn_0.06O₂ (NCM811)-based battery with the hybrid solid electrolyte exhibits a high discharge capacity of 241.5 mAh/g at a high charge-cut-off voltage of 4.8V and stable electrochemical reaction. The NCM811-based battery also shows 139.4 mAh/g discharge capacity without short circuit or explosion at 90℃. Therefore, the LATP-based hybrid solid electrolyte can be an effective solution to improve the safety and electrochemical properties of rechargeable lithium batteries.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.1
• /
• pp.34-42
• /
• 1988

To investigate the effects of paper sludge on seasonal variations of volatile lower fatty acids in paddy soil, paper sludge was applied to pots at the rate of either 300, 600, 900 or 1,200 kg/l0a which was either preadjusted at a C/N ratio of 30 : 1 or not adjusted. The decomposition rate of paper sludge, the evolution of $CO_2$, and the fractions of volatile lower fatty acids in the soil were determined. The results are summarized as follows: 1. Paper sludge was decomposed to $35{\sim}44%$, and its C/N ratio was $55{\sim}82$, respectively, at 120 days after treatment. 2. The evolution of $CO_2$, in the soil was proportional to the amount of paper sludge added. Significant positive correlations were observed the $CO_2$ evolution was compared with the decomposition rate of paper sludge, and volatile fatty acid contents in soil. 3. Acetic, propionic, butyric, i-butyric, valeric and i-valeric acids were identified in all the soils investigated. The content of the total volatile fatty acids in the soil increased with as the application of paper sludge increased. The formation of the acids was the highest at 25 days after treatment, and thereafter the contents of the acids decreased as time elapsed. 4. The volatile fatty acids in the soil inhibited the growth of paddy rice in early stages. The contents of acetic, propionic and i-valeric acids in the soil negatively, correlated with the uptake of N, $P_2O_5$, $K_2O$, CaO, MgO and $SiO_2$ in the paddy rice at 25 days after transplantation. In addition, the uptake of $P_2O_5$ and CaO in the paddy rice negatively correlated with the content of butyric acid in the soil. 5. The content of total volatile fatty acids positively correlated with the content of $Fe^{++}$ and $Mn^{++}$ in the soil at 25 days after transplantation. A significantly positive correlation was observed between $Fe^{++}$ and acetic acid contents in the soil.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.392.1-392.1
• /
• 2016

Nowadays, research interest in developing the wearable devices are growing remarkably. Portable consumer electronic systems are becoming lightweight, flexible and even wearable. In fact, wearable electronics require energy storage device with thin, foldable, stretchable and conformable properties. Accordingly, developing the flexible energy storage devices with desirable abilities has become the main focus of research area. Among various energy storage devices, supercapacitors have been considered as an attractive next generation energy storage device owing to their advantageous properties of high power density, rapid charge-discharge rate, long-cycle life and high safety. The energy being stored in pseudocapacitors is relatively higher compared to the electrochemical double-layer capacitors, which is due to the continuous redox reactions generated in the electrode materials of pseudocapacitors. Generally, transition metal oxides/hydroxide (such as $Co_3O_4$, $Ni(OH)_2$, $NiFe_2O_4$, $MnO_2$, $CoWO_4$, $NiWO_4$, etc.) with controlled nanostructures (NSs) are used as electrode materials to improve energy storage properties in pseudocapacitors. Therefore, different growth methods have been used to synthesize these NSs. Of various growth methods, electrochemical deposition is considered to be a simple and low-cost method to facilely integrate the various NSs on conductive electrodes. Herein, we synthesized amorphous $NiWO_4$ NSs on cost-effective conductive textiles by a facile electrochemical deposition. The as-grown amorphous $NiWO_4$ NSs served as a flexible and efficient electrode for energy storage applications.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.64-68
• /
• 1999

The properties of purified intracellular adenosine deaminase (adenosine aminohydrolase, EC 3.5.4.4) of Nocardioides sp. J-326TK isolated from soil have been studied. The enzyme deaminated adenosine and 2`-deoxyadenosine and the respective {TEX}$K_{M}${/TEX} values were 4.0×{TEX}$10^{-4}${/TEX} M and 5.0× {TEX}$10^{-4}${/TEX} M, but the enzyme was not active on 8-bromoadenosine, 6-methylaminopurine riboside, ATP, ADP, 2`-AMP, 3`-AMP, 5`-AMP, dAMP, cAMP, NAD, FAD, NADP and adenine. The enzyme activity was strongly inhibited by the addition of {TEX}$Hg^{2+}${/TEX} and {TEX}$Ag^{+}${/TEX}, {TEX}$Cu^{2+}${/TEX}, {TEX}$Co^{2+}${/TEX} and {TEX}$Mn^{2+}${/TEX} also inhibited the activity but much less extent. The effect of alkyl reagents, metal chelating reagents and certain other compounds on the enzyme activity were also examined. No reagent activated the enzyme. On the contrary, the enzyme reaction was slightly inhibited by o-phenanthroline and 6-benzyladenosine.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1638-1643
• /
• 2018

Multi-layer ceramic capacitors as decoupling capacitor were fabricated by dielectric composition with a high dielectric constant. The fabricated decoupling capacitors were embedded in the PCB of the 10G RF transceiver module and evaluated for the characteristics of electrical noise by the level of AC input voltage. In order to further improve the electrical properties of the $BaTiO_3$ based composite, glass frit, MgO, $Y_2O_3$, $Mn_3O$, $V_2O_5$, $BaCO_3$, $SiO_2$, and $Al_2O_3$ were used as additives. The electrical properties of the composites were determined by various amounts of additives and optimum sintering temperature. As a result of the optimized composite, it was possible to obtain a density of $5.77g/cm^3$, a dielectric constant of 1994, and an insulation resistance of $2.91{\times}10^{12}{\Omega}$ at an additive content of 5wt% and a sintering temperature of $1250^{\circ}C$. After forming a $2.5{\mu}m$ green sheet using the doctor blade method, a total of 77 layers were laminated and sintered at $1180^{\circ}C$. A decoupling capacitor with a size of $0.6mm(W){\times}0.3mm(L){\times}0.3mm(T)$ (width, length and thickness, respectively) and a capacitance of 100 nF was embedded using a PCB process for the 10G RF Transceiver modules. In the range of AC input voltage 400mmV @ 500kHz to 2200mV @ 900kHz, the embedded 10G RF Transceiver modules evaluated that it has better electrical performance than the non-embedded modules.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.119-120
• /
• 2004

Urban groundwater has a unique hydrologic system because of the complex surface and subsurface infrastructures such as deep foundation of many high buildings, subway systems, and sewers and public water supply systems. It generally has been considered that increased surface impermeability reduces the amount of groundwater recharge. On the other hand, leaks from sewers and public water supply systems may generate the large amounts of recharges. All of these urban facilities also may change the groundwater quality by the recharge of a myriad of contaminants. This study was performed to determine the factors controlling the recharge of deep groundwater in an urban area, based on the hydrogeochemical characteristics. The term ‘contamination’ in this study means any kind of inflow of shallow groundwater regardless of clean or contaminated. For this study, urban groundwater samples were collected from a total of 310 preexisting wells with the depth over 100 m. Random sampling method was used to select the wells for this study. Major cations together with Si, Al, Fe, Pb, Hg and Mn were analyzed by ICP-AES, and Cl, N $O_3$, N $H_4$, F, Br, S $O_4$and P $O_4$ were analyzed by IC. There are two groups of groundwater, based on hydrochemical characteristics. The first group is distributed broadly from Ca-HC $O_3$ type to Ca-C1+N $O_3$ type; the other group is the Na+K-HC $O_3$ type. The latter group is considered to represent the baseline quality of deep groundwater in the study area. Using the major ions data for the Na+K-HC $O_3$ type water, we evaluated the extent of groundwater contamination, assuming that if subtract the baseline composition from acquired data for a specific water, the remaining concentrations may indicate the degree of contamination. The remainder of each solute for each sample was simply averaged. The results showed that both Ca and HC $O_3$ represent the typical solutes which are quite enriched in urban groundwater. In particular, the P$CO_2$ values calculated using PHREEQC (version 2.8) showed a correlation with the concentrations of maior inorganic components (Na, Mg, Ca, N $O_3$, S $O_4$, etc.). The p$CO_2$ values for the first group waters widely ranged between about 10$^{-3.0}$ atm to 10$^{-1.0}$ atm and differed from those of the background water samples belonging to the Na+K-HC $O_3$ type (<10$^{-3.5}$ atm). Considering that the p$CO_2$ of soil water (near 10$^{-1.5}$ atm), this indicates that inflow of shallow water is very significant in deep groundwaters in the study area. Furthermore, the P$CO_2$ values can be used as an effective parameter to estimate the relative recharge of shallow water and thus the contamination susceptibility. The results of our present study suggest that down to considerable depth, urban groundwater in crystalline aquifer may be considerably affected by the recharge of shallow water (and pollutants) from an adjacent area. We also suggest that for such evaluation, careful examination of systematically collected hydrochemical data is requisite as an effective tool, in addition to hydrologic and hydrogeologic interpretation.ion.ion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.12
• /
• pp.1077-1082
• /
• 2008

To fabricate a multi-layered piezoelectrics/electrodes structure, the piezoelectrics should be sintered at the temperature lower than $950^{\circ}C$ to use the silver electrode, which is cheaper than the electrodes containing noble metals such as Pd and Pt. Therefore, in this study, we modified the composition of $Pb(Zr,Ti)O_3$-based material as $(Pb_{0.98}Cd_{0.02})(Ni_{1/3}Nb_{2/3})_{0.25}Zr_{0.35}Ti_{0.4}O_3$ to lower the sintering temperature and to improve the piezoelectric properties. Small amount of $MnCO_3$, $SiO_2$, and $Pb_3O_4$ were also added to lower the sintering temperature of the ceramic. The prepared raw powders were mixed by using a ball mill for 24 hours. And then the mixed powders were calcinated for 2 hours at $800^{\circ}C$. The calcinated powders were again crushed with the ball mill for 72 hours. The final powders were pressed for making the shape of ${\emptyset}15\;mm$ disk. The disk-type samples were sintered at temperature range of $850{\sim}950^{\circ}C$. The crystal phases of the sintered specimens were perovskite structure without secondary phases. All of the measured electrical properties such as electromechanical coupling coefficients ($k_p$), mechanical quality factors ($Q_m$), and piezoelectric charge constants ($d_{33}$) were decreased with decreasing the sintering temperatures. The electrical properties measured at the sample sintered at $950^{\circ}C$ were 54% of $k_p$, 503 of $Q_m$, and 390 pC/N of $d_{33}$, respectively. These properties were considered to be fairly good for the application of multi-layered piezoelectric generators or actuators.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.189-190
• /
• 2005

본 논문에서는 카메라폰용 광학줌(Optical zooming)과 자동초점조절장치(Auto Focusing,AF)에 쓰일 초음파모터를 제작하였다. 초음파모터의 제작 및 시뮬레이션은 유한요소해석 프로그램인 ATILA 5.2 1(Magsoft co.)를 사용하여 디자인설계에 따른 구동특성을 고찰하였고 제작된 초음파모터는 한쪽 면이 없는 사작형의 탄성체를 제작하였으며 탄성체의 양쪽 다리에 각각 압전체를 부착하였다 또한 압전세라익의 조성은 0.9Pb$(Zr_{0.51}Ti_{0.49})O_3$ - 0.1Pb$(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$ 의 조성으로 설계하였고 시편의 제조는 7-layer로 적층하였다. 제작된 압전세라믹의 치수는 6*2*0.35mm$^3$(길이*폭*두께)로 제작하였다. 또한 탄성체의 외형치수는 8*4*2mm$^3$로 제작하였으며 회전축의 지름은 2mm로 제작하였다. 인가전압과 공진주파수가 각각 20Vpp, 64kHz일 때 소비전력은 0.3[W]이며 회전속도는 500rpm 으로 측정되었다.