• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.85-92
• /
• 2009

A concrete is considered unfriendly-environmental material because it uses cement which emits much $CO_2$ during producing process. However, a concrete absorbs $CO_2$ through carbonation process during service life. In this paper how much concrete absorbs $CO_2$ through carbonation was calculated using 1) concentration of carbonatable substances in concrete, 2) carbonated volume of concrete, 3) molecular weight of $CO_2$ based on references and the method was proposed. $CO_2$ emission from producing $1m^3$ concrete was calculated based on $CO_2$ emission datum of materials used in concrete. From using these methods that calculate $CO_2$ emission and absorption of concrete, assessment of $CO_2$ emission-absorption against a real apartment was conducted by subtracting absorption $CO_2$ according to service life from $CO_2$ emission in the process of making concrete. As a result, a ratio of absorption over emission of $CO_2$ through concrete carbonation according to service life 40, 60, 80 years was assessed about 3.65, 4.47, 5.18%. An objective of this study is to propose how to calculate emission - absorption of $CO_2$ from producing and using concrete. Although the result value, emission - absorption of $CO_2$, is 5.18% very low when the service life of an apartment is 80years, the value can be improved by reducing emission from using blended cement such as blast furnace slag or increasing replacement ratio of cement and increasing carbonated volume of concrete from expanding service life of a building. This study may be useful when $CO_2$ emission - absorption of concrete is evaluated in the further study.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.184-194
• /
• 2023

Purpose: The purpose of this study is to identify the characteristics of C02 emissions by road before establishing a policy to reduce greenhouse gas emissions. Method: As for the analysis method, the traffic volume and speed of the road were estimated using the traffic Assignment model targeting 27 arterial road axes in Incheon Metropolitan City. And, after estimating CO2 emissions by road axis by applying this, the characteristics of each group were analyzed through cluster analysis. Result: As a result of cluster analysis using total CO2 emissions, CO2 emissions by truck vehicles, and the ratio of truck vehicle emissions to total carbon dioxide emissions, four clusters were classified. When examining the characteristics of each road included in each group, it was analyzed that the characteristics of each group appeared according to the level of impact by CO2 emissions and truck vehicles. Conclusion: It is judged that it is necessary to establish a plan in consideration of CO2 emission characteristics for road CO2 management for greenhouse gas reduction.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.150-158
• /
• 2007

As the amount of $CO_2$ emission in Korea is ranked 9th and the increasing rate of $CO_2$ emissions highest in the world, it is strongly necessary to devise methods to decrease the amount of $CO_2$ in each industry as the basis of establishing environmentally sustainable production system. This paper aims to identify the characteristics of $CO_2$ emissions from construction wastes throughout the simplified LCA (Life Cycle Assessment) and suggest the strategic guideline for the construction waste management plan to decrease $CO_2$. As a result of LCA on the case of a high-rise residential building project, total sum of $CO_2$ emission generated from construction wastes appeared as 6,818,123kg-$CO_2$ and $CO_2$ emission per unit floor area as 21.01kg-$CO_2/{\beta}{\ge}$. The principal waste materials generating more than 95% of $CO_2$ are materials such as reinforcing bar, temporary materials, cement, ready-mixed-concrete, concrete products, and tile, which have relatively high unit emission rate of $CO_2$ in the process of production. Besides, more than 92% of $CO_2$ was generated from the activities such as structure work, plaster work, temporary work, and tile and stone work, which are generally executed in the early phase of the whole construction period. Reflecting these results, the guideline for the construction waste management plan was recommended. If the waste management plan is established considering the guideline suggested, there would be high potential to decrease the amount of $CO_2$ generated from construction wastes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.16-25
• /
• 2003

In this paper, the reduction of green house effect gas CO₂ emission and NOx gas emission by using the RORO ship coastal transport of import-export container cargo was investigated. At first, the domestic CO₂ gas emission and the transportation of import-export container cargo were Investigated. Next, the characteristic of a RORO ship and CO₂ emission standard and NOx emission standard were investigated. And also, the reduction of CO₂ emission and NOx emission by the shift of coastal transport from land transport for the transportation of import-export container cargo between Kyongin area and Pusan Port were calculated. Finally, the change of CO2 and NOx gas emission due to the change of the share of coastal transportation and the load efficiency of RORO ship are investigated. The research results show that the shift of RORO ship coastal transport from land transport was very effective to reduce the CO₂ emission but it was no good to reduce the NOx emission.

• Environmental and Resource Economics Review
• /
• v.26 no.1
• /
• pp.1-35
• /
• 2017

This study investigates a decomposition analysis of the determinants of the reduced $CO_2$ emissions in seven OECD countries that implemented carbon taxes from 1995 to 2013. Recent studies on decomposition analysis of changes in $CO_2$ emissions focused on technology-based physical factors; however, this study analyzes the effects of a carbon tax as an economic factor. According to the results obtained by using the Log Mean Divisia Index, the energy intensity effect and the carbon tax effect contributed the most towards the reduction of total $CO_2$ emissions in the seven OECD countries. The results for each country show that the emissions decreased due to the energy intensity effect, while the effects of carbon tax and carbon tax revenues differed by policy and environment of the countries.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.45.2-45.2
• /
• 2010

자동차 주행 시 엔진회전수가 1,500rpm 이상이고 주행속도가 50km/hr 이상의 조건에서 가속 페달을 밟지 않은 상태로 관성주행(타행주행)을 하면 연료분사량이 "0"이 되고 그에 따라 엔진 배출 $CO_2$ 배출량도 "0"이 된다. 본 연구에서는 고속도로 및 자동차 전용도로에서의 이러한 연료차단(퓨얼컷 fuel-cut) 주행 구간을 찾고 연료차단 기능을 활용하는 경우 그 효과를 평가하였다. 본 시험의 결과 퓨얼컷 주행을 활용하면 약 4~5% 정도의 $CO_2$ 배출량을 줄일 수 있음을 알 수 있었고, 감속의 정도를 도로 상황에 맞게 최적화하는 경우 감소율을 더욱 향상시킬 수 있을 것으로 판단된다. 추후 본 시험의 결과를 이용하여 도로 내리막 구간에서 연료소모량 및 $CO_2$ 배출량을 저감하면서도 과속으로 인한 사고를 예방하는 방안으로 활용할 수 있을 것으로 판단된다.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.177-184
• /
• 2011

There are several differences between freeways and general national roads in terms of structures, conditions and limited speeds. Likewise, the characteristics of $CO_2$ emission in these roads differ depending on the road types. For these reasons, it is necessary to compare the two types of roads in terms of $CO_2$ emissions. The study was performed targeting Gyeongbu Expressway and National Highway 1. Firstly, the amount of $CO_2$ emission each car was compared in the whole sections of the both. Secondly, top 10 sections were picked out, and then $CO_2$ emission each section were compared. Lastly, two sections which were with the highest and lowest amount of $CO_2$ emission per car, were compared. As results, it were found that there were less amount of $CO_2$ emission on freeways. because cars are running on uniform velocity at relatively high speed, and that there were more amount of $CO_2$ emission on the national highway. because of frequent intersections and associated congestion. It may be concluded that the amount of $CO_2$ emission at the national highway could be reduced if signal coordination and intersection intervals are improved there.

• Environmental and Resource Economics Review
• /
• v.13 no.3
• /
• pp.441-468
• /
• 2004

We estimate carbon embodied in the export goods of Korea. A commodity-by-industry IO model ($CO_2$ hybrid IO model) is constructed for the estimation. In the model, all monetary units of energy commodities are converted to physical unit, carbon tons. Results show that total $CO_2$ embodied in the exports of non-energy goods of Korea equals 51.18 million carbon ton or 44% of total $CO_2$ emissions in Korea in 2000. Overall carbon intensity of export goods is estimated as 0.227 carbon ton per million Won. These findings suggest Korea's responsibility on global warming may be imputed to the countries who import and consume Korean goods. It is in accordance with the user pay principle. It is also argued that if UNFCCC impose the burden of $CO_2$ mitigation on importing countries rather than exporting countries, we can prevent '$CO_2$ emission leakages' effectively.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.383-390
• /
• 2016

According to the "Framework Act on Low Carbon, Green Growth", publication of annual national greenhouse gas (GHG) inventory report is mandatory. This annual GHG inventory report is used as basal data for GHG mitigation strategies. In the livestock sector, GHG emission trends from year 1990 to 2013 were estimated based on the 1996 IPCC guidelines with the Tier 1 methodology. GHG emissions from the livestock sector in 2013 were 9.9 million tons $CO_2-eq$., where emissions from enteric fermentation were 4.4 million tons $CO_2-eq$, increased by 47.4% over 1990 mainly due to the increase in non-dairy cattle population. On the other hand, GHG emissions from livestock manure in 2013 were 5.5 million tons $CO_2-eq$, increased by 75.5% over 1990 mainly due to the increase in non-dairy cattle, swine and poultry populations. Additional research is required to develop country-specific emission factors to estimate GHG emissions precisely from livestock in South Korea.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.133-150
• /
• 2015

This study estimates greenhouse and noxious gas emissions caused by cargo-handling equipment at the Port of Incheon in 2013 by applying the NONROAD Model (U.S. EPA). The port emitted 838.4 tons of NOx and 82,747 tons of CO2. The estimates are 2.4 times higher for NOx and 1.3 times higher for CO2 than those of the Port of Los Angeles. Emissions from general cargo-handling equipment are five times more than those from container cargo-handling equipment. Among the three ports comprising the Port of Incheon, the emissions at the North Port, which handles raw materials for industry are relatively higher than those at the other ports. Compared to the study conducted by Chang et al. (2013, 2014), this study finds that CO2 and NOx emissions per cargo-handling equipment are 10 times higher than the corresponding amounts per ship.