• Korean Journal of Poultry Science
• /
• v.31 no.4
• /
• pp.213-219
• /
• 2004

The objectives of this study were to investigate the effect of applying three different chemical additives to the litter (rice hull) on broiler performance, ammonia and carbon dioxide gas reduction in a poultry house at 6 weeks. A total of 96 broiler chicks (6 treatments$\times$4 replicates$\times$4 birds) were fed the experimental diets for 6 weeks. The chemical additives were applies as a top dressing to the litter at a rate of 200 g ferrous sulfate $(FeSO_4)$, 200 g aluminum chloride $(AlCl_3)$ + 50 g calcium carbonate $(CaCO_3)$ and 20 g potassium permanganate $(KMnO_4)$ per kg litter, while the control group did not have the three different chemicals added to the litter. There were no significant differences in broiler performance between the three chemical additives and control group. $FeSO_4\;and\;AlCl_3\;+\;CaCO_3$ treatment reduced ammonia production from the litter at 6 weeks by as much as 91 and $53\%$, respectively (P<0.05). $KMnO_4$ treatment decreased ammonia production at 6 weeks up to $69\%$ compared to the controls (P<0.05). Poultry litter amended with $AlCl_3\;+\;CaCO_3\;and\;KMnO_4$ also caused a decrease (P<0.01) in carbon dioxide productions at 6 weeks (59 and $65\%$, respectively). In conclusion, although broiler performance was not affected by the three chemical additives and control group, these results indicate that $FeSO_4,\;AlCl_3\;+\;CaCO_3\;and\;KMnO_4$ application to litter in a poultry house resulted in a significant reduction in atmospheric ammonia and carbon dioxide gas.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1385-1390
• /
• 2010

Repeated additions of untreated slurry to soil affected ecology and caused high levels of heavy metal in soil and ground water. The objective of this study was to evaluate heavy metal from hanwoo slurry with ferrous sulfate ($FeSO_4{\cdot}7H_2O$), aluminum sulfate [$Al_2(SO_4)_3{\cdot}14H_2O$, alum] and aluminum chloride ($AlCl_3{\cdot}6H_2O$) as a way to improve environmental management in hanwoo industry. The treatment rates, which were incorporated totally within the hanwoo slurry, were 1.0 g and 1.5 g of ferrous sulfate, alum and aluminum chloride/25 g of hanwoo slurry. The various rates of chemical additives significantly increased dry matter (9.98~13.94%) and decreased pH (3.48~6.52) compared with the controls. The use of chemical additives decreased Fe (11~29%), Al (7~12%), Zn (13~36%), and Cu (4~32%) contents, except for Fe in hanwoo slurry with ferrous sulfate and Al in hanwoo slurry with alum and aluminum chloride. In addition, the reduction in heavy metal should be associated with reduction in pH. In conclusion, the results of this study suggest that alum and aluminum chloride additives at rate of 1.5 g were cost-effective management practice that significantly reduces heavy metal from hanwoo slurry, while it may be improved environmental management.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.63-69
• /
• 2010

With the increase of the use of antibiotics and invasive procedures, infections caused by multidrug-resistant Acinetobacter baumannii(MRAB) are increasing. We screened the antibiotic producing strain B-51 for antibacterial activity against MRAB from the soils and studied the effects of culture medium on the antibiotic production of B-51. The medium conditions for maximum antibiotic productivity of B-51 was 2% glycerol, 0.5% soybean meal, 0.01% $CaCl_2$, 0.01% $MgSO_4{\cdot}7H_2O$ and 0.01% $KH_2PO_4$ at an initial pH of 6.0, at $30^{\circ}C$ for 76 h.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.677-684
• /
• 2012

A bacterium strain GS-2 isolated from the Korean traditional seasoning food, Chungkookjang and was determined to produce large amounts of ${\gamma}$-PGA with high productivity when provided with simple nutrients (L-glutamic acid 2.0%, glucose 1.0%, $NH_4Cl$ 0.5%, $KH_2PO_4$ 0.05%, $MgSO_4{\cdot}7H_2O$ 0.01%, pH 7.0). In this study, the culture medium for this strain was optimized for the production of ${\gamma}$-PGA. The Bacillus subtilis GS-2 required supplementation with L-glutamic acid and other nutrients for maximal production of ${\gamma}$-PGA. The optimal culture conditions for ${\gamma}$-PGA production were a 48 hr culture time, a temperature of $33^{\circ}C$ and initial pH of 6.5 by rotary shaking (220 rpm). A maximum ${\gamma}$-PGA production of 31.0 $g/{\ell}$ was obtained with L-glutamic acid (30 $g/{\ell}$), sucrose (the main carbon source, 30 $g/{\ell}$), $NH_4Cl$ (the main nitrogen source, 2.5 $g/{\ell}$), $KH_2PO_4$ (1.5 $g/{\ell}$) and $MgSO_4{\cdot}7H_2O$ (0.15 $g/{\ell}$) in the culture medium.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2000

Bioconversion of fumarate to succinate was anaerobically conduced in a synthetic medium containing glycerol as a hydrogen donor and fumarate as a hydrogen acceptor. We investigated the effects of pH, carbon and nitrogen sources, conversion substrate, and other culture conditions on the production of succinate using a nwely isoloated Enterococcus facalis PKY1. Addition of a variety of carbonates to the medium significantly increasd the rates of production of succinate. The production of succinate and cell growth were relatively satisfactory in the pH range of 7.0-7.6. By using glycerol as a hydrogen donor, high purity succinate was produced with few byproducts. Yeast extract as a sole nitrogen source was the most effective for producing succinalte. As a result, the optimum condition of biconversion was obtained at a medium containing 20g/I glycerol, 50 g/l fumarate, 15 g/l yeast extract, 10 g/l $K_2HPO_4$, 1 g/I NaCl, 50ppm $MgCl_2{\cdot}6H_2O$, 10ppm $FeSo_4{\cdot}7H_2O$, and 5 g/I $Na_2CO_3$ at pH 7.0-7.6. Under the optimum condition, a succinate concentration of 153 g/I was produced in 36 h. The total volumetric production rate and the molar yield of succinate were 4.3 g/l/h and 85%, respectively.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.327-334
• /
• 2002

Fine particles of $SnO_2$ were fabricated by the sol-gel powder processing using tine(II) chloride dihydrate($SnCl_2{\cdot}2H_2O$) and ethanol($C_2H_5OH$) as raw materials. The powders were investigated about the properties and electrical sensing. Gel powders were fabricated by drying of sol at $120^{\circ}C$ after aging 72hrs and 168hrs. The amount of $SnO_2$ phase was increased below $600^{\circ}C$ due to the elimination of volatile components, and the $SnO_2$ phase was almost completed by the heat treatment at $700^{\circ}C$ for 30min. The grain sizes were about 30nm below $700^{\circ}C$, and it showed the narrow distribution of the grain sizes. The specimens to measure electrical properties were fabricated by the thick film screen printing technique on the alumina substrates. The conductance of $SnO_2$ was showed the intrinsic behaviour of semiconducting ceramics above at $450^{\circ}C$. The constant conductance was observed in the temperature range of $200{\sim}450^{\circ}C$. The sensing properties of response time, recovery, and sensitivity of CO were improved with aging time.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.557-564
• /
• 2009

The objective of this study is to efficiently recover phosphorus contained in sewage sludge by a struvite-forming method. The performances were evaluated under various operating conditions(elution with the kind of acid, Mg-compound and temperature) in order to reach the optimum conditions of struvite-forming. As a result, as an elution solution, the elution efficiency of $H_2SO_4$ was 2.65 times higher than that of HCl. Also, the precipitation efficiency of struvite was the highest (97.4%) in case of using $MgCl_2{\cdot}6H_2O$ as Mg-compounds at $25^{\circ}C$. However, the side reaction by Fe, Al and Zn appeared in process of phosphorus recovery. To solve some problems caused by side reacton, large quantities of co-precipitation materials produced by side reaction were removed by precipitating phosphorus compounds in pH 7. Consequently, the recovery efficiency of phosphorus by a struviteforming method was 82.99%, and purity of the recovered struvite product was high.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1747-1751
• /
• 2006

The dinuclear tetraazadiphenol macrocyclic nickel(II) complexes [$Ni_2$([20]-DCHDC)]$Cl_2$ (I), [$Ni_2$([20]-DCHDC)]$(ClO_4)_2{\cdot}2CH_3CN $ (II(b)) and [$Ni_2$([20]-DCHDC)$(NCS)_2$] (III) {$H_2$[20]-DCHDC = 14,29-dimethyl-3,10,18,25-tetraazapentacyclo-[25,3,1,$0^{4,9}$,$1^{12,16}$,$0^{19,24}$]ditriacontane-2,10,12,14,16(32),17,27(31), 28,30-decane-31,32-diol} have been synthesized by self-assembly and characterized by elemental analyses, conductances, FT-IR and FAB-MS spectra, and single crystal X-ray diffraction. The crystal structure of II(b) is determined. It crystallizes in the monoclinic space group P2(1)/c. The coordination geometries around Ni(II) ions in I and II(b) are identical and square planes. In complex III each Ni(II) ion is coordinated to $N_2O_2$ plane from the macrocycle and N atoms of NCS- ions occupying the axial positions, forming a square pyramidal geometry. The nonbonded Ni…Ni intermetallic separation in the complex II(b) is 2.8078(10) $\AA$. The FAB mass spectra of I, II and III display major fragments at m/z 635.1, 699.4 and 662.4 corresponding to [$Ni_2$([20]-DCHDC)(Cl + 2H)]$^+$, [$Ni_2$([20]-DCHDC)$(ClO_4\;+\;2H)]^+$ and [$Ni_2$([20]-DCHDC)(NCS) + 6H]$^+$, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.220-230
• /
• 2014

BACKGROUND: Excessive metals in the soil have become one of the most significant environmental problems. Phytoremediation has received considerable attention as a method for restoring the contaminated soils. The microbes having remarkable metal tolerance and plant growth-promoting abilities could also play a significant role in remediation of metal-contaminated soils, because bioaugmentation with such microbes could promote phytoextraction of metals. Therefore, the present study was focused on evaluating the phytoextraction of heavy metals (Co, Pb and Zn) in Helianthus annuus (sunflower) induced by bioaugmentation of a phosphate solubilizing bacterium. METHODS AND RESULTS: A phosphate solubilizing bacterium was isolated from metal-contaminated soils based on the greater halo size (>3 mm) with solid NBRIP agar medium containing 10 g glucose, 5 g $Ca_3(PO_4)_2$, 5 g $MgCl_2{\cdot}6H_2O$, 0.25 g $MgSO_4.7H_2O$, 0.2 g KCl, 0.1 g $(NH_4)_2SO_4$ in 1 L distilled water. Isolated bacterial strain was assessed for their resistance to heavy metals; $CoCl_2.6H_2O$, $2PbCO_3.Pb(OH)_2$, and $ZnCl_2$ at various concentrations ranging from $100-400{\mu}g/mL$ (Co, Pb and Zn) using the agar dilution method. A pot experiment was conducted with aqueous solutions of different heavy metals (Co, Pb and Zn) to assess the effect of bacterial strain on growth and metal uptake by Helianthus annuus (sunflower). The impact of bacterial inoculation on the mobility of metals in soil was investigated under laboratory conditions with 50 mL scaled polypropylene centrifuge tubes. The metal contents in the filtrate of plant extracts were determined using an atomic absorption spectrophotometer (Perkinelmer, Aanalyst 800, USA). CONCLUSION: Inoculation with Enterobacter ludwigii PSB 28 resulted in increased shoot and root biomass and enhanced accumulation of Co, Pb and Zn in Helianthus annuus plants. The strain was found to be capable of promoting metal translocation from the roots to the shoots of H. annuus. Therefore, Enterobacter ludwigii PSB 28 could be identified as an effective promoter of phytoextraction of Co, Pb and Zn from metal-contaminated soils.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.247-249
• /
• 2008

자성 결정체인 $Fe_3O_4$ 나노 입자를 합성하기위하여 강한 극성 용매인 2-pyrrolidone을 연전도 반응매개체로 하여 용액 내에 $FeCl_3{\cdot}6H_2O$을 용해시켜 2-pyrrolidone의 비등점까지 나노 결정체 고온 열분해 방법을 이용하여 제조되었다. 고온 열분해 후, $Fe_3O_4$ 나노 입자는 methanol/diethyl ether (1:3)에 의해서 침전되어졌다. 합성된 $Fe_3O_4$ 나노 입자는 고결정도, 고자기성을 가지고 있으며, 수용성의 자성 나노 결정체이다. 합성된 $Fe_3O_4$ 나노 입자의 크기와 결정도는 transmission electron microscope (TEM, Tecnai F20)를 이용하여 특성 분석하였으며, area electron diffraction (SAED) pattern과 HRTEM을 이용하여 나노입자의 격자 패턴 (lattice fringes)을 확인하였다.