• 제목/요약/키워드: $CoAl_2O_4$

검색결과 634건 처리시간 0.029초

Ba3V4O13-BaV2O6계 초저온 동시소성 세라믹스의 마이크로파 유전 특성 (Microwave Dielectric Properties of Ultra-Low Temperature Co-firable Ba3V4O13-BaV2O6 Ceramics)

  • 윤상옥;홍서영;조형환;김신
    • 한국전기전자재료학회논문지
    • /
    • 제34권5호
    • /
    • pp.342-347
    • /
    • 2021
  • Phase evolution, sintering behavior, microstructure, and microwave dielectric properties of (1-x) mol Ba3V4O13 - (x) mol BaV2O6 system were investigated. The sintered specimens of all compositions consisted of Ba3V4O13 and BaV2O6, and no secondary phase was observed. As x increased, the linear shrinkage decreased to the composition of x=0.5, and then increased again, implying that Ba3V4O13 and BaV2O6 phases interfered mutually with each other during sintering. All compositions showed a dense microstructure with a large grain growth. Cracks were observed in some compositions because of the relatively high sintering temperature of 620~640℃. As x increased, the dielectric constant increased, while the quality factor was maintained from about 50,000 GHz to about 70,000 GHz up to the composition of x=0.9, and then decreased to 20,987~27,180 GHz at the composition of x=1.0. As x increased, the temperature coefficient of the resonance frequency showed a (+) value from a (-) value. The dielectric constant, the quality factor, and the temperature coefficient of resonant frequency of x=0.7 composition sintered at 640℃ for 4 hours were 10.61, 71,126 GHz, and -4.9 ppm/℃, respectively. This composition showed a good chemical compatibility with Al powder, indicating that the Ba3V4O13-BaV2O6 ceramics are a candidate material for ULTCC (Ultra-Low Temperature Co-fired Ceramics) applications.

고온 용융염계에서 Ni-Base 초합금의 부식거동 (Corrosion Behavior of Ni-Base Superalloys in a Hot Molten Salt)

  • 조수행;강대승;홍순석;허진목;이한수
    • 대한금속재료학회지
    • /
    • 제46권9호
    • /
    • pp.577-584
    • /
    • 2008
  • The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. So, it is essential to choose the optimum material for the process equipment handling molten salt. In this study, corrosion behavior of Inconel 713LC, Inconel MA 754, Nimonic 80A and Nimonic 90 in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere was investigated at $650^{\circ}C$ for 72~216 hrs. Inconel 713LC alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of Inconel 713LC were $Cr_2O_3$, $NiCr_2O_4$ and NiO, and those of Inconel MA 754 were $Cr_2O_3$ and $Li_2Ni_8O_{10}$ while $Cr_2O_3$, $LiFeO_2$, $(Cr,Ti)_2O_3$ and $Li_2Ni_8O_{10}$ were produced from Nimonic 80A. Also, corrosion products of Nimonic 90 were found to be $Cr_2O_3$, $(Cr,Ti)_2O_3$, $LiAlO_2$ and $CoCr_2O_4$. Inconel 713LC showed local corrosion behavior and Inconel MA 754, Nimonic 80A, Nimonic 90 showed uniform corrosion behavior.

MA포장용 기능성 포장 소재개발에 관한 연구(1) (Development of Packaging Materials for MA Packaging(1))

  • 박형우;박무현;김훈;이재영;양한철
    • 한국포장학회지
    • /
    • 제3권2호
    • /
    • pp.25-31
    • /
    • 1996
  • 과실, 채소류가 수확 후 발생하는 에칠렌 등의 가스를 흡착하는 소재를 개발하여 과재류의 신선도 유지용 포장소재로 개발코자 천연제올라이트와 이를 가공한 소재들간의 특성을 검토하였다. 천연 제올라이트의 성분조성은 $SiO_2$가 66.34%, $Al_2O_3$가 13.89%였고 Si/Al의 몰비가 4.78로서 silica가 비교적 높은 게올라이트였으며, DTA와 TG 곡선에서 $80^{\circ}C$ 부근에서 미미한 탈수를 나타냈고 $1,000^{\circ}C$에서 16%의 감량이 나타났다. X-선 회절분석 결과 mordenite가 주요구성광물이었으며, 비표면적은 천연 제올라이트가 $75.2m^2/g$였으나 가열온도가 높아짐에 따라서 비표면적은 $2.12m^2/g$까지 감소함으로 열처리에 의한 방법은 바람직하지 않았으나, 화학 처리한 것들의 비표면적은 1N HCl로 처리한 것은 $90.78m^2/g$으로 나타나 산처리 한 것이 비표면적이 가장 높게 나타났는데, 이는 천연 제올라이트 보다 약 4배 증가되었다. 따라서, 포장소재로는 산처리한 것이 가장 우수하였다.

  • PDF

이소프로판올의 탈수반응에 있어서 Mg-Al 혼합 산화물의 산점 특성 (Acidic Properties of Mg-Al Mixed Oxides in the Dehydration of iso-Propanol)

  • 윤현기;안지혜;박정현;신채호
    • 청정기술
    • /
    • 제20권3호
    • /
    • pp.330-336
    • /
    • 2014
  • Mg/Al 몰비를 1에서 3 범위에서 변화시켜 Mg-Al 혼합산화물을 공침법으로 제조하였다. 제조된 Mg-Al 혼합산화물은 X-선회절분석, 주사전자현미경분석, 질소흡착에 의한 비표면적 및 기공부피 측정, 이소프로판올의 승온탈착모델 반응으로 제조된 산화물의 특성분석을 수행하였다. 소성된 Mg-Al 혼합산화물은 이소프로판올의 탈수소/탈수반응에 적용하여 산염기 특성을 비교하였다. Mg-Al 혼합산화물에서 Al 함량이 증가함에 따라 비표면적 및 산점세기가 비례적으로 증가하였다. 이러한 산점세기 변화는 이소프로판올의 전환율 및 프로필렌 선택도에 직접적인 영향을 미쳤다.

고신뢰성 ESD보호용 칩 바리스터의 전기적 특성 (Electrical Properties of Multilayer Chip Varistor for ESD Protection with High Reliability.)

  • 윤중락;;;;;;최근묵;정태석;이석원;이헌용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.319-320
    • /
    • 2006
  • In order to improve the ESD(Electrical Static Discharge) resistance of multilayer chip varistors, we have investigated ZnO-$Pr_6O_{11}$ based chip varistor by applying tape casting technology, whose fundamental component were ZnO : $Pr_6O_{11}$ :$Co_3O_4$: $Y_2O_3$: $Al_2O_3$=93.67: 2.53:2.53:1.25 : 0.015 (wt %). The effect of sintering condition on the multilayer chip varistors and electric properties was studied. The electrical properties and ESD resistance of multilayer chip varistor could be influenced the sintering temperature and condition.

  • PDF

방사성 폐기물 내 $^{59/63}Ni$ 정량을 위한 분리 (Separation for the Determination of $^{59/63}Ni$ in Radioactive Wastes)

  • 이창헌;정기철;최광순;지광용;김원호
    • 방사성폐기물학회지
    • /
    • 제3권4호
    • /
    • pp.309-317
    • /
    • 2005
  • 방사성 폐기물 핵종 재고량 평가에 필요한 핵종분석을 위하여 다양한 매질의 방사성 폐기물 시료로부터 $^{99}Tc,\;^{94}Ng,\;^{55}Fe,\;^{90}Sr$$^{59/63}Ni$의 분리에 관한 연구가 수행되고 있다. Ni은 음이온교환 수지와 Sr-Spec 추출 크로마토그래피 수지로 Re($^{99}Tc$의 대용물), Nb, Fe 및 Sr을 차례로 분리하는 과정에서 Ca, Mg, Al, Cr, Ti, Mn, Ce, Na, K 및 Cu와 함께 회수되었다. 본 연구에서는 Ni의 선택적 분리기술을 확립하기 위하여 Ni-Spec 추출 크로마토그래피 및 양이온교환수지법으로 이들의 분리거동을 비교하였다. 또한 Ni의 정제와 기체비례계수법으로 방사능을 측정하기에 적합한 계측시료 준비를 위하여 ammonium $citrate/ethanol-H_2O$ 및 tartaric $acid/acetone-H_2O$에서 dimethylglyoxime(DMG)에 의한 Ni의 침전거동을 조사하였다 원자력발전소로부터 채취한 폐이온교환수지 시료 용해용액의 화학조성을 모사하여 만든 모의 폐이온교환수지 용액을 사용하여 Re, Nb, Fe 및 Sr 분리과정을 거쳐 최종적으로 분리한 Ni의 회수율은 $92.1\%\;(RSD:\;0.9\%)$이었다. 또한 tartaric $acid/acetone-H_2O$에서 DMG에 의한 Ni의 회수율은 $85.6\%\;(RSD:\;1.9\%)$이었다.

  • PDF

충남탄전, 대동누층군의 셰일과 탄질암에 관한 암석화학 및 환경지구화학적 특성 (Petrochemistry and Environmental Geochemistry of Shale and Coal from the Daedong Supergroup, Chungnam Coal Field, Korea)

  • 이찬희;이현구;김경웅
    • 자원환경지질
    • /
    • 제30권5호
    • /
    • pp.417-431
    • /
    • 1997
  • Characteristics of sedimentary rocks and enrichment of toxic elements in shale and coal from the Chungnam coal field were investigated based upon geochemistry of major, trace and rare earth elements. Shale and coal of the area are interbedded along the Traissic to the Jurassic Daedong Supergroup, which can be subdivided into grey shale, black shale and coal. The coal had been mined, however all the mines are abandonded due to the economic problems. The shale and coal are characterized by relatively low contents of $SiO_2$, and $Al_2O_3$ and high levels of loss-on-ignition (LOI), CaO and $Na_2O$ in comparison with the North American Shale Composite (NASC). Light rare earth elements (La, Ce, Yb and Lu) are highly enriched with the coal. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shale and coal range from 30.0 to 351.8 and from 4.2 to 106.8, which have partly negative correlations against $SiO_2/Al_2O_3$ (1.24 to 6.06), respectively. Those are suggested that controls of mineral compositions in shale and coal can be due to substitution and migration of those elements by diagenesis and metamorphism. Shale and coal of the area may be deposited in terrestrial basin deduced from high C/S (39 to 895) and variable composition of organic carbon (0.39 to 18.40 wt.%) and low contents of reduced sulfur (0.01 to 0.05 wt.%). These shale and coal were originated from the high grade metamorphic and/or igneous rocks, and the rare earth elements of those rocks are slightly influenced with diagenesis and metamorphism on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.38 to 0.85) and Th/U (3.6 to 14.6). Characteristics of trace and rare earth elements as Co/Th (0.07 to 0.86), La/Sc (0.31 to 11.05), Se/Th (0.28 to 1.06), V/Ni (1.14 to 3.97), Cr/V (1.4 to 28.3), Ni/Co (2.12 to 8.00) and Zr/Hf (22.6~45.1) in the shale and coal argue for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (1.36 to 21.68), Th/Yb (3.5 to 20.0) and La/Th (0.31 to 7.89), and their origin is explained by derivation from a mixture of mainly acidic igneous and metamorphic rocks. Average concentrations in the shale and coal are As=7.2 and 7.5, Ba=913 and 974, Cr=500 and 145, Cu=20 and 26, Ni=38 and 35, Pb=30 and 36, and Zn=77 and 92 ppm, respectively, which are similar to those in the NASC. Average enrichment indices for major elements in the shale (0.79) and coal (0.77) are lower than those in the NASC. In addition, average enrichment index for rare earth elements in coal (2.39) is enriched rather than the shale (1.55). On the basis of the NASC, concentrations of minor and/or environmental toxic elements in the shale and coal were depleted of all the elements examined, excepting Cr, Pb, Rb and Th. Average enrichment indices of trace and/or potentially toxic elements (As, Cr, Cu, Ni, Pb, U and Zn) are 1.23 to 1.24 for shale and 1.06 to 1.22 for coal, respectively.

  • PDF

Er이 도핑된 졸-겔 코팅막의 발광특성 (Near IR Luminescence Properties of Er-doped Sol-Gel Films)

  • Lim, Mi-Ae;Seok, Sang-Il;Kim, Ju-Hyeun;Ahn, Bok-Yeop;Kwon, Jeong-Oh
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.136-136
    • /
    • 2003
  • In fiber optic networks, system size and cost can be significantly reduced by development of optical components through planar optical waveguides. One important step to realize the compact optical devices is to develop planar optical amplifier to compensate the losses in splitter or other components. Planar amplifier provides optical gain in devices less than tens of centimeters long, as opposed to fiber amplifiers with lengths of typically tens of meters. To achieve the same amount of gain between the planar and fiber optical amplifier, much higher Er doping levels responsible for the gain than in the fiber amplifier are required due to the reduced path length. These doping must be done without the loss of homogeniety to minimize Er ion-ion interactions which reduce gain by co-operative upconversion. Sol-gel process has become a feasible method to allow the incorporation of Er ion concentrations higher than conventional glass melting methods. In this work, Er-doped $SiO_2$-A1$_2$ $O_3$ films were prepared by two different method via sol -Eel process. Tetraethylorthosilicate(TEOS)/aluminum secondary butoxide [Al (OC$_4$ $H_{9}$)$_3$], methacryloxypropylcnethoxysaane(MPTS)/aluminum secondary butofde [Al(OC$_4$ $H_{9}$)$_3$] systems were used as starting materials for hosting Er ions. Er-doped $SiO_2$-A1$_2$ $O_3$ films obtahed after heat-treating, coatings on Si substrate were characterized by X-ray din action, FT-IR, and N-IR fluorescence spectroscopy. The luminescence properties for two different processing procedure will be compared and discussed from peak intensity and life time.

  • PDF

영월 화력발전소에서 배출된 석탄회의 광물학적, 지화학적 특성 (Mineralogical and Geochemical Characteristics of PFA (Pulverised Fuel Ash) from Yongwol Power Plant)

  • 이규호;최선경;문희수;이상훈
    • 자원환경지질
    • /
    • 제30권5호
    • /
    • pp.443-450
    • /
    • 1997
  • The main purpose of this study is to investigate mineralogical and chemical changes during natural weathering, and assess the mobility of major and trace elements. Yongwol power plant utilize anthracite coal which is mainly composed of illite, kaolinite, pyrophyllite and quartz in mineralogy. Coal and coal-derived fly ash samples were sampled by the electrostatic precipitator in Yongwol coal-fired power plant in Korea. Short term weathered fly ash were also collected in ash disposal mound, and two profile soil samples were taken from an ash near the power plant. Amorphous materials are the main component of the fly ash, and mullite, quartz, magnetite and heamatite are present in all coal-derived fly ash. In chemistry, Si and Al are the most abundant elements of the total content. The ash samples were fractionated into upper $90{\mu}m$ and under $45{\mu}m$ size. Finer particles show higher concentrations in metal contents including Co, Cr, Cu, Ni, V, Zn and Pb. Concentration of Zn and Pb are nearly 4 times higher concentration in the finer particles. For the profile samples, the concentrations of $SiO_2$, $Na_2O$, MgO and $K_2O$ generally show increasing trends with depth, whereas those of $Fe_2O_3$ and $TiO_2$ appear to decrease with depth. Content of MnO does not show any specific depth trend. For the trace elements, Co, Cu, Ni and V show increasing concentrations with depth.

  • PDF

제올라이트-W의 압력전달매개체에 따른 체적탄성률 비교 연구 (Comparative Compressional Behavior of Zeolite-W in Different Pressure-transmitting Media)

  • 성동훈;김현수;김표상;이용문
    • 광물과 암석
    • /
    • 제34권3호
    • /
    • pp.169-176
    • /
    • 2021
  • 본 연구는 압력을 이용한 제올라이트 내 중금속 양이온 또는 CO2 기체 포집 등의 응용연구를 하기 위한 기초 단계로 제올라이트의 압력 및 압력전달 매개체(Pressure-transmitting medium, PTM)에 따른 결정구조의 변화를 알아보기위한 목적으로 실험을 진행하였다. 천연 제올라이트 멜리노이트(Merlinoite, (K,Ca0.5,Ba0.5,Na)10 Al10Si22O64× 22H2O)와 동일한 골격구조를 가지는 합성 물질인 제올라이트-W(K6.4Al6.5Si25.8O64× 15.3H2O, K-MER)의 압력 하 압력전달 매개체에 따른 선형 압축률 및 체적 탄성률의 변화에 대한 X선 회절연구를 진행하였다. 합성된 시료는 정방정계에 속하는 I4/mmm 공간군으로 확인되었다. 압력전달 매개체 중 제올라이트의 동공 및 채널을 투과할 수 있는 투과 매개체(Penetrating medium)로 물, 이산화탄소를, 비투과 매개체로 실리콘 오일(Silicone-oil)을 각각 사용하였으며, 상압에서 최대 3 GPa까지 약 0.5 GPa 간격으로 가압하였다. 다이아몬드 고압유도장치 및 방사광 X-선원을 이용하여 압력 하 시료의 분말 회절을 측정하였고, 르바일(Le-Bail)법 및 버치-머내한 상태방정식을 이용하여 격자상수 및 체적탄성률의 변화를 관찰하였다. 모든 실험에서 c축의 선형압축률(𝛽c)은 0.006(1) GPa-1또는 0.007(1) GPa-1의 값을 보여 압력 증가 대비 유사한 압축률을 보인 반면, a축의 압축률(𝛽a)은 실리콘 오일 실험에서 0.013(1) GPa-1을 보여 물과 이산화탄소 (𝛽a=0.006(1) GPa-1) 실험결과에 비해 압축률이 약 두 배정도 큰 것으로 확인할 수 있었다. 체적탄성률(K0)은 물, 이산화탄소, 실리콘 오일의 실험에서 각각 50(3) GPa, 52(3) GPa, 29(2) GPa로 도출되었다. 압력 증가에 따른 ac면의 orthorhombicity를 측정한 결과 물과 이산화탄소 실험에서는 0.350~0.353의 비교적 일정한 값을 보였으나, 실리콘 오일의 실험에서는 y = -0.005(1)x + 0.351(1)의 함수를 만족시키며 압력이 증가할수록 값이 점차 작아졌다.