• 한국세라믹학회지
• /
• 제12권1호
• /
• pp.29-36
• /
• 1975

This study was conducted to research the formation, color development and application for colored glazes of the spinel solid solutions of the green pigment. On specimens prepared by calcining the oxide and basic carbonate mixture at 1250℃ for 1.5 hour, the x-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were carried out. The results are summarized as follows 1) Each sample is composed of single spinel and not of mixture of spinel. 2) Formation of continuous soild solution, except for a few instances, pertaining to Vegard's law was confirmed by means of the x-ray analysis. 3) The more difference between absorption and reflectance lies, the lighter colors are. When the absorption occurs at the high-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity is higher. 4) Colors obtained in the CdO-MgO-Cr2O3-Al2O3 system, as the amounts of Al3+ increased, change from green through brown to pink, and the absorption peak shifts towards violet region. 5) An increase in Co2+ in the CoO-MgO-Cr2O3-Al2O3 system, changes the color from blue green to dark blue. The excitation purity is higher, and the absorption peak shifts toward regions. 6) Colors are green in the NiO-MgO-Cr2O3 and CdO-MgO-Cr2O3 systems in general, but in the ZnO-MgO-Cr2O3 system brillant hue is not obtained. 70 According to the results of the colored glaze test, the spinels turn outto be stable as brilliant glaze pigment in the calcium-magnesia glaze.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.156-160
• /
• 1994

Use of engineering ceramics has been increasing due to the outstanding physical and chemical properties. Conventional machining processes, however, are not applicable due to their hardness and brittleness. Laser cutting is a promising alternative for these ceramics. In this study, experimental data of CO $_{2}$ laser cutting of $Al_{2}$ $O_{3}$ and Si $_{3}$ N $_{4}$ are obtained to give a guide in the industry. Results of $Al_{2}$ $O_{3}$ cutting showed extreme weakness to thermal crack and it was found that pulsed beam has to be used for thick $Al_{2}$ $O_{3}$ specimen. Si $_{3}$ N $_{4}$ showed good results for both CW and pulsed beams. Using pulsed beam resulted narrower kerf width with increased surface roughness a nd reduced cutting speed. It was also found that a parameter call path energy is useful for representing minimum threshold value for possible cutting range with pulsed beam.

• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.871-877
• /
• 2018

전 세계적으로 재생에너지의 비율이 증가함에 따라, 재생에너지로부터 생산되는 불연속적이고 간헐적인 에너지 저장 문제가 주목을 받고 있다. 다양한 에너지 저장 시스템(ESS) 중에서 $CO_2$ 메탄화 기술은 타 시스템에 비해 높은 저장 용량과 저장 기간으로 각광 받고 있다. $CO_2$ 메탄화 반응은 발열반응이며, 촉매가 낮은 온도 범위($250-500^{\circ}C$)에서 높은 활성 및 메탄 선택도를 갖는다. 기존의 고정층 방식에 비하여 유동층 반응기는 높은 열전달 특성으로 인해 발열반응에 적합하며, 열전달과 물질 전달이 유리한 장점을 갖고 있다. 본 연구에서는, 촉매 특성 평가를 위해 기포유동층 반응기(Diameter: 0.025 m, Height: 0.35 m)와 $Ni/{\gamma}-Al_2O_3$ (Ni 70% and ${\gamma}-Al_2O_3$ 30%) 촉매를 사용하였다. 반응 조건은 $H_2/CO_2$ mole ratio: 4.0-6.0, 조업온도 $300-420^{\circ}C$, 조업 압력 1-9 bar 및 $U_o/U_{mf}$ 1-5이었다. 생성 가스의 조성은 NDIR를 통해 분석하였으며, $CO_2$ 전환율은 $H_2/CO_2$ ratio, 압력, 온도가 증가함에 따라 높아지는 경향을 보였다. 이에 반해 가스유속이 빨라질수록 $CO_2$ 전환율은 떨어졌다. 최적의 운전 조건은 $H_2/CO_2$ ratio: 5, 조업온도 $400^{\circ}C$, 조업 압력 9 bar 및 $1.4-3U_{mf}$이었으며 이 때 $CO_2$ 전환율은 99.6%로 나타났다. 본 실험 촉매의 경우 장기 운전 시 촉매 성능 저하가 없이 $CO_2$ 전환율이 일정하게 유지하는 것을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.79-83
• /
• 2012

신뢰성이 우수하며, 소형화가 가능하고, 우수한 열전도도의 은 전극을 이용할 수 있는 LTCC (Low temperature co-fired ceramic) 패키징은 환경 및 열에 약한 플라스틱 패키징을 대체할 것으로 기대받고 있다. 현재 LTCC 패키징의 원료 분말로는 주로 $Al_2O_3$을 사용하는데, 본 연구에서는 $Al_2O_3$보다 열전도도가 2배 우수한 ZnO을 일부 첨가 또는 대체한 조성 변화를 통하여 패키징의 열 특성 변화에 대해 연구하였다. 소량의 ZnO를 첨가하여 열전도도가 최대 25%까지 상승하는 결과가 나타났으며, 이 결과로 LED 수명이 증가할 것으로 예상된다. ANSYS 시뮬레이션 결과 열 유속의 값이 ZnO가 첨가된 경우 최대 56% 증가함을 확인할 수 있었다. 실제 LED 패키징을 제작하여 측정한 결과도 ZnO를 첨가한 LTCC 패키징은 $Al_2O_3$로만 이루어진 패키징보다 열저항이 최대 14.9% 감소하였다.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.109-112
• /
• 2005

Electronic and magnetic properties of $Ti_{1-x}M_xO_{2-\delta}$ (M=Co and Fe) thin films grown by sol-gel method have been investigated. Anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films were successfully grown on $Al_2O_3$ (0001) substrates and exhibited p-type electrical conductivity while the undoped films n-type conductivity. Room temperature vibrating sample magnetometry measurements on the anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films with same x ($=4.8 at.{\%}$) showed quite similar magnetic hysteresis curves with the saturation magnetic moment of $\~4 {\mu}_B$ per Co ion despite their differences in structural and electronic properties. Such giant magnetic moment is attributable to the unquenched orbital moment of the $Co^{2+}$ ions substituting the octahedral $Ti^{4+}$ sites. Similar ferromagnetic behavior was observed for $Ti_{1-x}Fe_xO_{2-\delta}$ films that are highly resistive compared to the Co doped samples. Saturation magnetic moment was found to decrease for higher x, i.e., $\~2$ and $\~1.5 {\mu}_B$ per Fe ion for x=2.4 and 5.8 at. $\%$, respectively. Conversion electron $M\ddot{o}ssbauer$ spectroscopy measurements predicted the coexistence of $Fe^{2+}$ and $Fe^{3+}$ ions at the octahedral sites of $Ti_{1-x}Fe_xO_{2-\delta}$.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.351-356
• /
• 2014

A spherical $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor for use in white-light-emitting diodes was synthesized using a liquid-state reaction with two precipitation stages. For the formation of phosphor from a precursor, the calcination temperature was $1,100^{\circ}C$. The particle morphology of the phosphor was changed by controlling the processing conditions. The synthesized phosphor particles were spherical with a narrow size-distribution and had mono-dispersity. Upon excitation at 395 nm, the phosphor exhibited an emission band centered at 497 nm, corresponding to the $4f^65d{\rightarrow}4f^7$ electronic transitions of $Eu^{2+}$. The critical quenching-concentration of $Eu^{2+}$ in the synthesized $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor was 5 mol%. A phosphor-converted LED was fabricated by the combination of the optimized spherical phosphor and a near-UV 390 nm LED chip. When this pc-LED was operated under various forward-bias currents at room temperature, the pc-LED exhibited a bright blue-green emission band, and high color-stability against changes in input power. Accordingly, the prepared spherical phosphor appears to be an excellent candidate for white LED applications.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.67-74
• /
• 2002

A phosphor for Plasma Display Panel, BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$, showing a blue emission band at about 450nm was prepared by a solid-state reaction using BaCO$_3$, $Al_2$O$_3$, MgO, Eu$_2$O$_3$ as starting materials wish flux AlF$_3$. The study of the behaviour of Eu in BAM phosphor was carried out by the photoluminescence spectra and the Rietveld method with X-ray and neutron powder diffraction data to refine the structural parameters such as lattice constants, the valence state of Eu, the preferential site of Mg atom and the site fraction of each atom. The phenomenon of the concentration quenching was abound 2.25~2.3wt% of Eu due to a decrease in the critical distance for energy transfer of inter-atomic Eu. Through the combined Rietveld refinement, R-factor, R$_{wp}$, was 8.11%, and the occupancy of Eu and Mg was 0.0882 and 0.526 at critical concentration. The critical distance of Eu$^{2+}$ in BAM was 18.8$\AA$ at 2.25% Eu of the concentration quenching. Furthermore, c/a ratio was decreased to 3.0wt% and no more change was observed over that concentration. The maximum entropy electron density was found that the modeling of $\beta$-alumina structure in BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$correct coincided showing Ba, Eu, O atoms of z= 1/4 mirror plane.e.ane.e.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.369-374
• /
• 2006

$V_2O_5$와 AlMCM-48을 고체상에서 반응시킨 후 소성하면 메조포러스 물질 내에서 V(V) 화학종이 아주 약하게 나타난다. 그러나 환원 과정을 거치면 EPR로 조사할 수 있는 바나딜 $VO^{2+}$ 화학종이 생성된다. $VO^{2+}-AlMCM-48$에 들어있는 바나듐의 화학적 환경을 XRD, EDX, UV-Vis, EPR, $^{29}Si$ and $^{27}Al$ and $^{51}V$ NMR로 조사하였다. 탈수하거나 CO 로 환원하면 바나듐은 MCM-48에 유사 사면체형 $VO^{2+}$ 바나딜 이온 상태로 존재하며 물이 배위되면 찌그러진 팔면체구조로 바뀐다.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.177-186
• /
• 1996

Surface alloying of Ti alloy by $CO_2$ laser is able to produce few hundred micrometers thick TiN or TiC surface-alloyed layer with high hardness on the substrate by injecting reaction gas($N_2$ or $CH_4$). Laser surface alloying by means of process control is in many applications essential in order to obtain predictable hardening layer. This research has been investigated the effect of such parameters on TiN and TiC gas alloying of Ti-6Al-4V alloy by $CO_2$ laser. The maximum surface hardness of TiN layer was obtained 1750Hv on the conditions of 0.8kW laser power, 0.8m/min scanning speed and 100% $N_2$ atmosphere. However, the maximum hardness of TiC formation layer after laser treatment was about 630Hv. As scanning speed was increased, the hardness and depth of these layers were decreased at constant laser power.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권7호
• /
• pp.293-297
• /
• 2003

Silicon dioxide (SiO$_2$) layers were fabricated on Si$_3$N$_4$/SiO$_2$/Si layer structures by low pressure chemical vapor deposition (LPCVD). Potassium and aluminum were then coimplanted by implanting potassium ions with the energy of 100 ［keY］ and dose of 5x10$^{16}$ [cm￣$^2$］ and 1x10$^{17}$ [cm￣$^2$］ into an aluminum buffer layer on the SiO$_2$Si$_3$N4/SiO$_2$/Si structure. The pH, pNa, and pK ion sensitivities of the resulting layers were investigated and compared to those of as-deposited silicon dioxide layer. The pK-sensitivity of the silicon dioxide was enhanced by the K and Al coimplantation. On the contrary, the pH and pNa-sensitivities of the coimplanted silicon dioxides were quite lower than that of the as-deposited silicon dioxide.