• 한국수소및신에너지학회논문집
• /
• 제14권2호
• /
• pp.155-170
• /
• 2003

$Cu-Ce/{\gamma}-Al_2O_3$ based catalysts were prepared and tested for selective oxidation of CO in a $H_2$-rich stream(1% CO, 1% $O_2$, 60% $H_2$, $N_2$ as balance). The effects of Cu loading and weight ratio(=Cu/(Cu+Ce)) upon both activity and selectivity were investigated upon the change in temperatures, It was also examined how the activity and selectivity of catalysts were varied with the presence of $CO_2$ and $H_2O$ in the reactant feed. Among the various Cu-Ce catalysts with different catalytic metal composition, Cu-Ce(4 : 16 wf%) /${\gamma}-Al_2O_3$ catalyst showed the highest activity(>$T_{99}$) and selectivities(50-80%) under wide range of temperatures($175-220^{\circ}C$). However, in the Cu-Ce(4 : 16 wt%)/ ${\gamma}-Al_2O_3$, the presence of $CO_2$ and $H_2O$ in the reactant feed decreased the activity and the maximum activity(>$T_{99}$) in terms of reaction temperature moved by about $25^{\circ}C$ toward higher temperature, the $T_{>99}$ window was seen between $210-230^{\circ}C$ (selectivity 50-75%). From $CO_2-/H_2O-TPD$, it can be concluded that the main cause for the decrease in catalytic activity may be attributed to the blockage of the active sites by competitive adsorption of water vapor and $CO_2$ with the reactant at low temperatures.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.552-555
• /
• 1995

The magnetic properties of Mg-Mn ferrites were investigated in the composition range of $Mg_{a}Mn_{b}Fe_{c}O_{4\pm\delta}$ (a+b+c=3) with the addition of $Al_{2}O_{3}$. In $MgO-MnO-Fe_{2}O_{3}$ ternary system, the spinel single phase existed within the composition range of MgO-50 mol%, MnO-70 mol% and $Fe_{2}O_{3}-60\;mol%$. The saturation magnetic flux density increased with the increase of $Fe_{2}O_{3}$ content and showed the maximum at the stoichiometric composition of $(Mg,Mn)Fe_{2}O_{4}$. In $Mg_{x}Mn_{1-x}Fe_{2}O_{4}(x=0.2~0.8)$ system, the saturation magnetic flux density showed the maximum at $Mg_{0.2}Mn_{0.8}Fe_{2}O_{4}$. The addition of $Al_{2}O_{3}$ resulted in the decrease of saturation magnetic flux density but increased the electrical resistivity.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.79-84
• /
• 2018

We present a novel and simple method to enable spatially selective $ZnAl_2O_4$ nanocrystal formation on the surface of $B_2O_3$-$Al_2O_3$-ZnO-CaO-$K_2O$ glass by employing localized laser heating. Optimized precipitation of glass-ceramics containing nanocrystals doped with $Eu^{3+}$ and $Yb^{3+}$ ions was performed by controlling $CO_2$ laser power and scan speed. Micro-x-ray diffraction and transmission electron microscopy revealed the mean size and morphology of nanocrystals, and energy dispersive x-ray spectroscopy showed the lateral distribution of elements in the imaged area. Laser power and scan speed controled annealing temperature for crystalization in the range of 1.4-1.8 W and 0.01-0.3 mm/s, and changed the size of nanocrystals and distribution of dopant ions. We also report more than 20 times enhanced downshift visible emission under ultraviolet excitation, and 3 times increased upconversion emission from $Eu^{3+}$ ions assisted by efficient sensitizer $Yb^{3+}$ ions in nanocrystals under 980 nm excitation. The confocal microscope revealed the depth profile of $Eu^{3+}$ ions by showing their emission intensity variation.

• 청정기술
• /
• 제23권1호
• /
• pp.104-112
• /
• 2017

해조류로부터 수열 액화 반응을 통해 생성된 원료를 이용하여 수소가스를 생산하기 위해 개질 반응용 상용화 촉매와 $K_2Ti_xO_y$가 첨가된 니켈(Ni) 제조 촉매를 사용하여 반응온도에 따른 수증기 개질 반응을 수행하였다. 반응원료는 해조류 바이오매스를 503 K의 반응온도에서 2시간 동안 수열 액화를 통해 생성된 액화 원료를 사용하였으며, 상용화 촉매(FCR-4-02)와 제조 촉매($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$, Ni/$K_2Ti_xO_y$-MgO) 및 반응온도에 따른 수증기 개질 반응의 활성을 비교 연구하였다. 실험결과 제조 촉매 4종 모두 상용화 촉매와 비교하여 반응활성이 높게 나타나는 것이 확인되었으며, 제조 촉매의 지지체에 따라 생성되는 가스의 조성이 달라지는 것이 확인되었다. 특히, 산성이나 염기성을 띄는 $Al_2O_3$와 MgO의 지지체와 중성을 띄는 $SiO_2$의 지지체에서는 CO가 선택적으로 높게 생성이 되었으며 환원성을 띄는 $CeO_2$를 포함하는 지지체에서는 수성가스 전환 반응이 일어나 $CO_2$가 높게 생성됨을 보였다.

• 전기화학회지
• /
• 제9권2호
• /
• pp.64-69
• /
• 2006

초음파분무열분해법과 한 단계의 후열처리로 이차상이 없는 Al이 첨가된 $Li(Ni_{1/3}Co_{1/3}Mn_{1/3-x}Al_x)O_2$ (x=0.0, 0.005, 0.01. 0.05) 리튬이차전지용 양극활물질을 합성하였다. 합성된 분말은 Al의 첨가량이 많아짐에 따라서 $I_{003}/I_{104}$ 비는 감소하고 입자가 커지는 경향을 보였다. 상온에서 전류밀도 1C의 rate로 $3.0\sim4.5V$ 범위에서 충방전 시험한 결과, Al 치환량이 0.5와 1.0 at%에서는 초기용량이 180과 $184mAhg^{-1}$으로 치환하지 않았을 때의 $182mAhg^{-1}$과 차이가 없었으며, 싸이클 특성도 치환하지 않은 것과 0.5, 1.0 at% 치환한 조성에서 각각 81, 77, 81%의 방전용량이 유지되었다. 그러나 $3.0\sim4.6V$에서는 치환효과가 확실하게 나타나서, 50 싸이클 후의 치환하지 않은 것의 방전용량은 초기용량의 30%가지 감소한데 비하여 Al을 0.5 at% 치환한 것은 70%를 유지하였다. 치환에 의한 싸이클 특성 향상은 XPS 분석 결과 Al 치환이 $Mn^{3+}$의 양을 감소시켰기 때문인 것으로 사료되었다.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2017-2020
• /
• 2005

The supported bimetallic Co-containing catalysts promoted by the different amount of noble metal (Pd) have been studied in the dry reforming of methane. The activity, selectivity, stability and resistance to the carbon deposition of Co-Pd/$Al_2O_3$ catalysts depend on both the catalyst composition and process conditions. It has been observed that the Co-Pd/$Al_2O_3$ catalysts produce the various oxygenates from $CO_2$ + $CH_4$ at moderate pressures.

• 에너지공학
• /
• 제8권2호
• /
• pp.256-264
• /
• 1999

본 연구에서는 메탄의 부분산화반응에 미치는 base metal 의 영향을 살펴보기 위하여 6~l2wt%의 Mn, Cu, V, Co, Cr 그리고 Ba 등이 2 wt% Pt, 70 wt% Alumina, 28 wt% Ceria and Zirconia 와 함께 cordierite (2MgO.2Al$_2$O$_3$.5SiO$_2$)에 담지된 Pt-B/cordierite 촉매(B: base metal)를 사용하여 메탄의 부분산화반응 실험을 수행하였다. 메탄의 부분산화반응에 대한 활성은 Ba, Co그리고 Cr 담지 촉매는 Ni담지 촉매와 유사하게 Mn, Cu, V을 담지 했을 때 보다 우수한 것으로 나타났으나, 코크 생성에 대한 활성도 큰 것으로 나타났다. 또한 5wt% Ni/Al$_2$O$_3$촉매를 이용한 메탄의 부분산화반응 실험 후의 촉매에 대한 XRD 분석결과 Ni은 3가지 형태의 상으로 존재하는 것을 확인할 수 있었으며, 촉매층 전단에서는 주로 NiAl$_2$O$_4$와 NiO 형태로 존재하여 메탄의 산화반응이 일어나며, 그리고 촉매층 후단에서는 환원상태의 Ni로 존재는 것으로 보아 개질반응이 일어나는 것을 알 수 있었다.

• 대한화학회지
• /
• 제13권2호
• /
• pp.149-156
• /
• 1969

$NaAl(OH)_2CO_3$was synthesized using colloidal earth (Allophane) as the starting material and some of its were studied in detail. It was found that Dawsonite was formed in the pH range (pH 12.5~12.0) that the concentration of $HCO_3^-$ was just begun to increase and the presence of $HCO_3^-$ in the product was clarified from the infrared absorption spectrum. The chemical formular of Dawsonite was therefore presumed as $NaAlO (OH) HCO_3$. From toahhe results of X-ray powder diffraction, both peaks at 5.7 $\AA$ and 2.8 $\AA$ were observed, and fibrous crystalline structure was observed from electron micrograph and also found from the microscopic electron diffraction at 5.7 $\AA.$ Therefore the fibrous axis was considered as =Al=O2=Al=O2=Al=(*image) direction. True specific gravity of Dawsonite was 2.44 and its porosity was 91.4%. It was practically insoluble in water, but decomposed in the boiling water to form Pseudo Boehmite. Stable pH range of Dawsonite was about 4.5~11.5. From the results of D.T.A. and T.G.A., it was observed that $CO_2$was liberated at $350^{\circ}C$, and $H_2O$ at $650^{\circ}C$, and converted into strongly hygroscopic $NaAlO_2$, which was easily decomposed in water into $\beta-Al(OH)_3(Bayerite)$ and NaOH.

• 청정기술
• /
• 제5권2호
• /
• pp.63-68
• /
• 1999

The activities of Ni(20wt%)/$La_2O_3$, Ni(20wt%)/${\gamma}-Al_2O_3$, and Ni(20wt%)/$SiO_2$ catalyst for $CO_2$ reforming of $CH_4$ were investigated in a fixed bed flow reactor under atmospheric condition. Catalyst characterization using XRD, TEM, SEM, BET analysis were also conducted. The catalytic activity of Ni(20wt%)/$La_2O_3$ catalyst has relatively superior to that of Ni(20wt%)/${\gamma}-Al_2O_3$ and Ni(20wt%)/$SiO_2$ catalyst. The good activity of Ni(20wt%)/$La_2O_3$ catalyst seems to depend on reduced $Ni^{\circ}$ phases of NiO($\rightarrow$ Ni + O), $LaNiO_3$($\rightarrow$ $Ni+La_2O_3$), Ni crystalline phases, and decoration of Ni phases by lanthanum species is also an important factor. Ni(20wt%)/${\gamma}-Al_2O_3$ and Ni(20wt%)/$SiO_2$ catalyst due to surface acidity resulted in the deposition of wisker type and encapsulate carbon on the surface of catalyst, but Ni(20wt%)/$La_2O_3$ catalyst did not show carbon on the surface of catalyst up to 8.5hr reaction.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.42-46
• /
• 2017

스컬용융법으로 $SrAl_2O_4$ : $Eu^{2+}$,$Dy^{3+}$ 형광체 합성을 하였으며, 합성한 형광체의 산화물 몰비는 $SrCO_3$ : $Al(OH)_3$ : $Eu_2O_3$ : $Dy_2O_3$= 1 : 2 : 0.015 : 0.02였다. 결정구조 및 표면 형상은 X-선 회절분석과 주사전자현미경으로 규명하였다. 합성한 $SrAl_2O_4$ : $Eu^{2+}$,$Dy^{3+}$의 광학적 특성인 여기, 발광 및 장잔광 특성의 심도 있는 연구를 위해 PL(photoluminescence) 분광계로 측정하였다. PL 측정을 통해 360 nm 영역에서 여기(excitation)되고, 300~420 nm의 파장까지 여기가 일어남을 확인하였다. 발광(emission)스펙트럼은 450~600 nm의 파장에서 폭넓은 스펙트럼을 보였으며, 530 nm에서 최대 발광파장을 나타내었다. $SrAl_2O_4$ : $Eu^{2+}$,$Dy^{3+}$ 형광체는 오랜 시간 동안 발광하는 장잔광 특성을 나타내었다.