• 공업화학
• /
• 제21권4호
• /
• pp.391-395
• /
• 2010

본 연구는 Pt/$TiO_2$ 촉매를 이용한 $H_2$ SCR 반응에서 배가스 중 CO에 대한 영향을 조사하였다. 반응가스 중 공존하는 CO는 촉매표면의 활성점에서 환원제인 $H_2$와의 경쟁흡착을 유발하여 반응활성을 감소시키는 결과를 나타내었다. 또한 경쟁흡착은 반응활성의 감소와 함께 미반응 $H_2$ 및 CO의 생성을 야기하였으며 주입되는 CO의 농도가 증가할수록 이러한 현상들은 극심한 양상을 보였다. CO에 의한 inhibition을 최소화하기 위하여 $PdO_2$, $CeO_2$를 첨가하였으며 $CeO_2$를 첨가한 촉매가 100 ppm 이하의 공존 CO에 대한 내구성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.339-339
• /
• 2010

The metallic nanoparticles (Pt, Au, Ag. Cu, etc.) supported on ceria-titania mixed oxide exhibit a high catalytic activity for the water gas shift reaction ($H_2O\;+\;CO\;{\leftrightarrow}\;H_2\;+\;CO_2$) and the CO oxidation ($O_2\;+\;2CO\;{\leftrightarrow}\;2CO_2$). It has been speculated that the high catalytic activity is related to the easy exchange of the oxidation states of ceria ($Ce^{3+}$ and $Ce^{4+}$) on titania, but very little is known about the ceria titanium interaction, the growth mode of metal on ceria titania complex, and the reaction mechanism. In this work, the growth of $CeO_x$ and Au/$CeO_x$ on rutile $TiO_2$(110) have been investigated by Scanning Tunneling Microscopy (STM), Photoelectron Spectroscopy (PES), and DFT calculation. In the $CeO_x/TiO_2$(110) systems, the titania substrate imposes on the ceria nanoparticles non-typical coordination modes, favoring a $Ce^{3+}$ oxidation state and enhancing their chemical activity. The deposition of metal on a $CeO_x/TiO_2$(110) substrate generates much smaller nanoparticles with an extremely high activity. We proposed a mechanism that there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.23-27
• /
• 2017

A series of $CeO_2-TiO_2$ composite samples with different Ce/Ti molar ratios were prepared by the paper template. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to confirm a face-centered cubic lattice of $CeO_2$ with Ce/Ti =8:2 or 9:1 and a two phase mixture of anatase titania and face-centered cubic ceria with Ce/Ti = 7 : 3. The field emission scanning electron microscopy (FESEM) results suggest that the products are micron braid structures consisting of fibers with diameters in a range of $1-6{\mu}m$ and lengths of several hundred micrometers. $N_2$ absorption-desorption testing shows that the composite at Ce/Ti molar fraction of 8 : 2 has the largest BET surface area (about $81m^2{\cdot}g^{-1}$). Compared to the pure $CeO_2$ sample, the composites show superior catalytic activity for $H_2$ reduction and CO oxidation. For the micron braid structure $CeO_2-TiO_2$ composite (Ce/Ti = 8 : 2), due to the high surface area and the solid solution with appropriate $Ti^{4+}$ incorporation, the CO conversion at about $280^{\circ}C$ was above 50% and at $400^{\circ}C$ was 100%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1740-1742
• /
• 2004

산소 과전압이 낮은 $MnO_2$를 촉매로 사용하여 반도체 산화물계의 산소선택성 전극을 제조하고 산화물 코팅층의 미세구조와 전기화학적 특성을 분석하였다. Ti 기판에 열분해 법을 이용하여 $MnO_2$ 피막을 형성하였고, 또한 binder를 이용한 코팅 방법을 이용하여 Ti, Fb 기판에 $MnO_2$ 피막층을 형성하였다. 450$^{\circ}C$에서 1시간 열분해하여 약 1 ${\mu}m$의 $MnO_2$ 피막층을 형성 시켰으나 Ti 기판과의 접착력이 약하여 피막자체에 대한 전기화학적 특성은 관찰할 수 없었다. PVDF : $MnO_2$의 함량비가 1:1에서 1:6 까지는 DMF의 함량에 무관하게 전극 특성이 나타나지 않았지만 20:1 이상의 조성에서는 균일한 C-V 특성을 나타냈고, 산소 발생 과전압도 약 1.4V 정도로 감소되었다. 그러나 Ti 기판의 경우 열분해법을 이용하여 제조된 전극과 같이 낮은 기판과의 접착력 때문에 $MnO_2$ 피막층의 촉매효과가 현저하게 감소하였다.

• 대한화학회지
• /
• 제37권8호
• /
• pp.765-772
• /
• 1993

Flux인 $K_2MoO_4$와 섬유원료물질인 $K_2CO_3,\;TiO_2$를 혼합하고 1150$^{\circ}C$에서 용융시킨 다음 950$^{\circ}C$까지 서냉하여(서냉속도=5$^{\circ}C$/h) 층상구조를 갖는 사티탄산칼륨($K_2Ti_4O_9$)과 육티탄산칼륨($K_2Ti_6O_{13}$) 섬유를 합성하였다. Flux(F)와 출발원료물질(R)의 혼합비에 따른 최적 섬유성장 조건을 조사하기 위하여 F:R을 변화시키면서 반응시킨 결과 섬유의 결정상 및 성장속도가 F:R의 비에 크게 의존함을 알 수 있었으며 본 실험조건에서는 사티탄산칼륨과 육티탄산칼륨 모두 F:R=7:3 일 때 섬유의 성장이 가장 양호하였다. F:R = 7:3이고, 출발조성이 $K_2O{\cdot}4TiO_2$인 경우 생성물은 $K_2Ti_4O_9$과 약간의 $K_2Ti_6O_{13}$의 혼합상이 얻어졌으며 평균 섬유 길이는 ${\thickapprox}$ 4 mm 정도의 비교적 장섬유를 얻을 수 있었다. $K_2O{\cdot}6TiO_2$ 조성인 경우도 $K_2Ti_4O_9$의 혼합상이 형성되었고 섬유의 평균길이는 ${\thickapprox}$ 2 mm 정도임을 관찰할 수 있었다.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.97-105
• /
• 2012

The effects of pH, types of applied current, agitation method and time, additive on the amount of co-deposited $TiO_2$ particles in the matrix were investigated. The deposition rates increased with increasing pH values, while the volume fraction of $TiO_2$ particles and the size of agglomerated $TiO_2$ particles in the composite decreased. The volume fraction of $TiO_2$ particles in the composite decreased when pulsed current of 50% duty cycle was used. And the size of agglomerated $TiO_2$ particles in the nickel matrix of pulsed current was smaller than that of DC current specimen. The volume fraction of $TiO_2$ particles in the matrix decreased with longer time by air agitation, but in case of using magnetic bar, volume fraction in the same range of time was relatively constant. The volume fraction of the electrodeposited Ni-$TiO_2$ composite in the solution containing 0.01 M Dimethylamine borane (DMAB) increased slightly with increasing agitation time regardless of agitation methods. Thermal stability of the electrodeposited Ni-$TiO_2$ composite increased with lower pH at the temperature range of $200{\sim}800^{\circ}C$, and the results showed that the amount of co-deposited $TiO_2$ relies more on the deposition rate than zetapotential of $TiO_2$ particles.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.104-108
• /
• 2018

Grain-growth behavior in the $95Na_{1/2}Bi_{1/2}TiO_3-5BaTiO_3$ (mole fraction, NBT-5BT) system has been investigated with the addition of $Na_2CO_3$. When $Na_2CO_3$ is added to NBT-5BT, the growth rate is higher than desired and grains are already impinging each other during the initial stage of sintering. The grain size decreases as the sintering temperature increases. With the addition of $Na_2CO_3$, a liquid phase infiltrates the interfaces between grains during sintering. The interface structure can be changed to be more faceted and the interface migration rate can increase due to fast material transport through the liquid phase. As the sintering temperature increases, the impingement of abnormal grains increases because the number of abnormal grains increases. Therefore, the average grain size of abnormal grains can be decreased as the temperature increases. The phenomenon can provide evidence that grain coarsening in NBT-5BT with addition of $Na_2CO_3$ is governed by the growth of facet planes, which would occur via mixed control.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1992년도 춘계 총회 및 학술발표회
• /
• pp.60-60
• /
• 1992

알루미나 분리막이 세라믹 분리막의 연구개발 초기단계부터 많은 사람들에 의해 연구되어온 반면, TiO$_2$ 및 ZrO$_2$ 분리막에 관한 연구는 상대적으로 관심이 적었고 따라서 그 내화학성및 투과특성의 우수함이 밝혀진 것도 최근의 일이다. TiO$_2$ 및 ZrO$_2$ UF 분리막의 제조방법으로는 $Al_2O_3$ 의 경우와 마찬가지로 대부분 졸-겔 공정이 이용되고 있다.

• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.41-46
• /
• 1986

When barium titanate was synthesized in solid-solid reaction the abnormal expansion occurred from 90$0^{\circ}C$ to 110$0^{\circ}C$. The equi molecular mixture of $BaCo_3$ and $TiO_2$ was sintered from 90$0^{\circ}C$ to 130$0^{\circ}C$ on the condition of air vacuum and $CO_2$ atomosphere. After that the specimens were tested closely with XDR Dilatometer and SEM The result indicated that: 1, Volume expansion to be synthesized barium titanate in solid-solid reaction was affected by atomosphere sintering. 2. The solid reaction ot fiorm barium titanate in vacuum atomosphere occurred faster than that in air atomosphere. In vacuum atomosphere the maxium volume expansion was about 30% at 90$0^{\circ}C$ for 2hrs, 3. The solid reaction to form barium titanate in 4CO_2$ atomosphere occurred slower than that in air atomosphere. In $CO_2$ atomosphere the maximum volume expansion was 13% at 100$0^{\circ}C$ for 2 hrs. 4. According to the result of x-ray the expanison was caused by the reaction to form $BaTiO_3$ and change $Ba_2TiO_4$ into 4BaTiO_3$.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.346-349
• /
• 2003

Microwave dielectric characteristics and physical properties of the new Zr$_{1-x}$ (Bn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ (0.2$\leq$x$\geq$ 1.0) system have been investigated as a function of the amount of Bn$_{1}$3/Nb$_{2/3}$ $O_2$substitution. With increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content (x), two phase regions were observed: $\alpha$-Pb $O_2$ solid solution (x<0.4), mixture of the rutile type Zn$_{1}$3/Nb$_{2/3}$Ti $O_4$ and the $\alpha$-Pb $O_2$ solid solution (x$\geq$0.4). In the$\alpha$-Pb $O_2$solid solution region below x<0.4, the Q.f$_{0}$ value sharply increased and the Temperature Coefficient of the Resonant Frequency(TCF) decreased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ contents while dielectric constant (K) showed nearly same value. In the mixture region above x$\geq$4, the dielectric constant and TCF increased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content. Zr$_{1-x}$ (Zn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ materials have excellent microwave dielectric properties with K=44.0, Q.f$_{0}$ : 41000 GHz and TCF =-3.0 ppm/$^{\circ}C$ at x=0.35.=0.35. x=0.35.=0.35.