• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.103-103
• /
• 2010

Dependence of radical and ion densities on Plasma Parameters is theoretically investigated in $Cl_2$/Ar plasma discharges. Firstly, a set of reliable rate coefficients is obtained by direct calculations with cross section data set and by comparing them with previously reported values. Then, some global discharge simulations are performed for ICP(inductively coupled plasma) discharges and the results are compared with experimental results. Finally, the validated data set is used to analyze the dependence of radical and ion densities, which are usually not easy to be measured, on electron density arid temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1294-1296
• /
• 1998

Platinum thin films which hardly form volatile compounds with any reactive gas at normal process temperature was etched in Inductively Coupled Plasma (ICP) using Ar/HBr/$Cl_2$ gases. It is observed that the etch rate of platinum is reduced as increasing of HBr/$Cl_2$ gas mixing ratio when Ar gas ratio is fixed. However, we obtain good etching profile of platinum films without unwanted residues in 90% Ar/5% HBr/5% $Cl_2$ gas mixing ratio.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.531-536
• /
• 2005

포토리지스트 마스크로 패턴된 CoTb 및 CoZrNb 자성 박막에 대한 유도 결합 플라즈마 반응성 이온 식각이 $Cl_2/Ar$와 $C_2F_6/Ar$ 가스를 이용하여 진행되었고 식각 속도와 식각 프로파일 측면에서 조사되었다. $Cl_2$와 $C_2F_6$ 가스의 농도가 증가함에 따라서 자성 박막들의 식각 속도는 감소하였고 식각 경사는 낮아졌다. 자성 박막들의 식각 가스로서 $Cl_2/Ar$이 빠른 식각 속도와 가파른 식각 경사를 얻는데 있어서 $C_2F_6/Ar$ 보다 더 효과적이었다. Coil rf power의 증가는 플라즈마 내의 Ar 이온과 라디칼의 밀도를 증가시키고 dc bias voltage의 증가는 기판으로 스퍼터되는 Ar 이온의 에너지를 증가시키기 때문에 coil rf power와 dc bias voltage가 증가할수록 식각 속도와 식각 경사는 증가하였지만 패턴의 측면에서 재증착이 일어났다. 자성 박막들의 적층으로 형성된 magnetic tunnel junction stack에 고밀도 플라즈마 반응성 이온 식각을 적용하여, 높은 식각 경사와 재증착이 없는 깨끗한 식각 프로파일을 얻었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.21-24
• /
• 2000

Ferroelectric YMnO$_3$thin films are excellent dielectric materials for high integrated ferroelectric random access memory (FRAM) with metal-ferroelectric-silicon field effect transistor (MFSFET) structure. In this study, YMnO$_3$thin films were etched with Cl$_2$/Ar gas chemistries in inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$thin films is 285 $\AA$/min under Cl$_2$/Ar of 10/0, 600 W/-200 V and 15 mTorr. The selectivities of YMnO$_3$over CeO$_2$and $Y_2$O$_3$are 2.85, 1.72, respectively. The results of x-ray photoelectron spectroscopy (XPS) reflect that Y is removed dominantly by chemical reaction between Y and Cl, while Mn is removed more effective by Ar ion bombardment than chemical reaction. The results of secondary ion mass spectrometer (SIMS) were equal to these of XPS. The etch profile of the etched YMnO$_3$film is approximately 65$^{\circ}$and free of residues at the sidewall.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.726-729
• /
• 2004

Etching characteristics of (Pb,Sr)$TiO_3$(PST) thin films were investigated using inductively coupled chlorine based plasma system as functions of gas mixing ratio, RF power and DC bias voltage. It was found that increasing of hi content in gas mixture lead to sufficient increasing of etch rate and selectivity of PST to Pt. The maximum etch rate of PST film is $562{\AA}/min$ and the selectivity of PST film to Pt is 0.8 at $Cl_2/(Cl_2+Ar)$ of 20 %. It was Proposed that sputter etching is dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching products.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.217-220
• /
• 2001

The possibility of cerium dioxide (CeO$_{7}$ ) thin films as insulators of metal erroelectric insulator semiconductor (MFIS) structures have been studied. The etching CeO$_2$ thin films have been performed in an inductively coupled C1$_2$/CF$_4$/Ar plasma. The high etch rate of the CeO$_2$ thin film was 250 ${\AA}$/m at a 10% addition of Cl$_2$ into the Ar(80)/CF$_4$(20). The surface reaction of the etched CeO$_2$ thin films was investigated using X-ray photoelectron spectroscopy (XPS) analysis. There are Ce-Cl and Ce-F bonding by chemical reaction between Cl, F and Ce. These products can be removed by the physical bombardment of incident Ar ions.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.188-192
• /
• 2000

In this study PZT etching was performed using planar inductively coupled Ar/Cl$_2$/BCI$_3$ plasma. The etch rate of PZT film was 2450 $\AA$/min at Ar(20)/BCl$_3$(80) gas mixing ratio and substrate temperature of 8$0^{\circ}C$. X-ray photoelectron spectroscopy(XPS) analysis for films composition of etched PZT surface was utilized. The chemical bond of PbO is broken by ion bombardment and Cl radical, and the peak of metal Pb in a Pb 4f narrow scan begins to appear upon etching. As increasing additive BCl$_3$content the relative content of oxygen decreases rapidly in contrast with etch rate of PZT thin film. So we though that the etch rate of PZT thin film increased because abundant B and BCl radicals made volatile oxy-compound such as B$_{x}$/O$_{y}$ and/or BClO$_{x}$ bond. We achieved etch profile of about 80$^{\circ}$ at Ar(20)/BCl$_3$(80) gas mixing condition and substrate temperature of 8$0^{\circ}C$TEX>X>.

• 한국표면공학회지
• /
• 제42권6호
• /
• pp.256-259
• /
• 2009

The wafer surface temperature is an important parameter in the etching process which influences the reaction probabilities of incident species, the vapor pressure of etch products, and the re-deposition of reaction products on feature surfaces. In this study, we investigated all of the effects of substrate temperature on the etch rate of $ZrO_2$ thin film and selectivity of $ZrO_2$ thin film over $SiO_2$ thin film in inductively coupled plasma as functions of $Cl_2$ addition in $BCl_3$/Ar plasma, RF power and dc-bias voltage based on the substrate temperature in range of $10^{\circ}C$ to $80^{\circ}C$. The elements on the surface were analyzed by x-ray photoelectron spectroscopy (XPS).

• 한국전기전자재료학회논문지
• /
• 제16권5호
• /
• pp.424-428
• /
• 2003

The channel of a superconducting flux flow transistor has been fabricated with plasma etching method using a inductively coupled plasma etching. The ICP conditions then were ICP Power of 450 W, rf chuck power of 150 W, the pressure in chamber of 5 mTorr, and Ar : Cl$_2$=1:1. Especially, over the 5 mTorr, the superconducting thin films were not etched. The channel etched by plasma gas showed the critical temperature over 85 K. The critical current of the SFFT was altered by varying the external applied current. As the external applied current increased from 0 to 12 mA, the critical current decreased from 28 to 22 mA. Then the obtained trans-resistance value was smaller than 0.1 $\Omega$ at a bias current of 40 mA.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.213-216
• /
• 2001

Etching behaviors of ferroelectric YMn $O_3$ thin films were studied by an inductively coupled plasma (ICP). Etch characteristic on ferroelectric YMn $O_3$ thin film have been investigated in terms of etch rate, selectivity and etch profile. The maximum etch rate of YMn $O_3$ thin film is 300 $\AA$/min at Ar/C $l_2$ of 2/8, RF power of 800W, dc bias voltage of 200V, chamber pressure of 15mTorr and substrate temperature of 3$0^{\circ}C$. Addition of C $F_4$ gas decrease the etch rate of YMn $O_3$ thin film. From the results of XPS analysis, Y $F_{X}$ compunds were found on the surface of YMn $O_3$ thin film which is etched in Ar/C1/C $F_4$ plasma. The etch profile of YMn $O_3$ film is improved by addition of C $F_4$ gas into the Ar/C $l_2$ plasma. These results suggest that fluoride yttrium acts as a sidewall passivants which reduce the sticking coefficient of chlorine on YMn $O_3$.>.