• 소성∙가공
• /
• 제15권3호
• /
• pp.213-219
• /
• 2006

To improve the strength of glass is being studied in order to contribute to weight saving of flat panel displays. Generally, the strength achieved of glass-ceramics is higher as is the fracture toughness by the formation of a heterogeneous phase inside glass. In this study, Ag-doped $45SiO_2-24CaO-24Na_2O-4P_2O_5\;and\;70SiO_2-10CaO-24Na_2O-10TiO_2$ glasses were irradiated to strengthen by crystallization using femto-second laser pulse. XRD, Nano-indenter and SEM etc., irradiation of laser pulse without heat-treated samples was analyzed. Samples irradiated by laser had higher value($4.4{\sim}4.56^*10-3Pa$) of elastic modulus which related with strength of glass than values heat-treated samples and these are $1.2{\sim}1.5$ times higher values than them of mother glass. This process can be applicable to the strengthening of thinner glass plate, and it has an advantage over traditional heat-treatment and ion-exchange method.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.51-59
• /
• 1986

It was the first time the MgO-C brick was developed for the lining materials in the hot spots in electric are furnace in 1972. MgO-C brick is high registant to thermal and structural spalling. Futhermore for the reason that carbon is hard to react with slag and MgO is high fireproof MgO-C brick shows a high corrosion registance to slag attack compared with conventional basic refractories. Owing to their excellent properties the use of MgO-C refractories are being developed widely in the field of shaped refractories and even in that of monolithic refractories. In this paper the oxidation of carbon the infiltration of slag into the brick texture and effects of additions were investigated. The results obtained were as follows : 1) The use of fused MgO-clinker and high purity carbon as raw materials increased the corosion registance and hot modulus of rupture of MgO-C brick. 2) As the oxidation reaction of the carbon proceeded the slag infiltrated into the brick texture. And then the slag components reacted with the MgO grains and formed low melting point compounds particulary CaO.MgO.$SiO_2$ and 3CaO.MgO.$2SiO_2$ that resulted in the wear of the brick. 3) It is recongnized the Al, Si, $B_3C$ effects on the oxidation registant properties of MgO-C brick by contribu-ting to the decrease of permeability according to the formation of $Al_4C_3$, SiC, $B_2O_3$ and the decrease of open pores relating to the formation of MgO.Al2O3, $SiO_2$, 3MgO.$B_2O_3$ at the decarbonized layer.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.105-113
• /
• 1997

Mineral description and mineralogical characterization were made for the wellsite, a barrian zeolite, which found as diagenetic alterations in the Miocene pyroclastic rocks in Gampo area. The wellsite occurs together with clinoptilolite, smectite and apatite as euhedral crystallites (0.2~0.4mm) forming interpenetraion twinning in the vesicles of altered pmice fragments. Compared to other reported wellsites, the wellsite is rather silicic (Si/(Al+Fe): 3.12-3.16) and Ca-rich. Unit cell dimensions and chemical formular determined from XRD, EMPA and TGA data are as follows:a=9.883$\AA$, b=14.204$\AA$, c=8.677$\AA$, $\beta$-124.764$^{\circ}$, (Ba0.57K0.36)(Ca1.18Na0.04)Al3.9Si12.1O32.13.9H2O.The cation composition of the Gampo wellsite, which shows an exchange reaction in the form of Ba2++Ca2+=2(K++Na-), is deviated far from the compositional range of a phillipsite-harmotome series. Due to higher abundance of divalent cations (Ca, Ba) and si in the wellsite, cimpared to those of the phillipsite and harmotome reported in other areas, the zeolite seems to be characteristic of higher water content (18.7 wt%) and higher thermal stability. XRD, chemical and thermo-chemical results of the wellsite reflects that wellsite is rather a Ba- and Ca-rich end member of a phillipsite-harmotome-wellsite series than an intermediate phase of phillipsite-harmotome series or a barrian variety of phillipste.

• 자원환경지질
• /
• 제11권4호
• /
• pp.183-186
• /
• 1978

Chemical analyses by electron microprobe indicate that the well-crystallized botryoidal coffinite with radial fibrous structure from the Woodrow Mine, New Mexico, U.S.A. has the formula ($U_{0.85}Ca_{0.14}$) $(Si_{0.86}P_{0.11}Al_{0.06}V_{0.02})O_2(OH)_4$, or ideally (U, Ca) (Si, P)$O_2(OH)_4$. It can be more simply designated as ideal formula $USiO_2(OH)_4$. This new formula is proposed for the coffinite.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.158-159
• /
• 2005

This study showed that the highest temperature point of the Dongrae thermal spring in Pusan was moved to the north direction of the Dongrae fault as times goes by. The Br concentration(1.5mg/L) in Dongrae thermal waters indicated the influence of 2% seawater mixing. If the simple mixing without hydrochemical reaction occurs between seawater and thermal water, the concentration of Mg will be about 20mg/L. But the low concentration(0.1 mg/L) of Mg, contrary to high concentration(10 mg/L) of surrounding groundwater not affected by thermal water, suggested the thermal water, seawater and rock interactions. The calculation of saturation index(SI) by using the geochemical code of EQ3NR showed that the Mg in thermal groundwater, which was introduced by seawater, was removed by the precipitation of Antigorite (SI: log Q/K =71.753, $Mg_{48}Si_{24}O_{85}(OH)_{62}$) and Tremolite (SI: 8.463, $Ca_2Mg_5Si_8O_{22}(OH)_2$), Talc (SI: 6.409, $Mg_3Si_4O_{10}(OH)_2$), Dolomite (SI: 2.014, $CaMg(CO_3)_2$), Chrysotile (SI: 3.698, $Mg_3Si_2O_5(OH)_4$) in the crack of fault zone. The highest temperature point in the study area will move to north direction and stop in the Jangjun area without the input of seawater.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.483-490
• /
• 1997

Al2O3/metal composites were fabricated by oxidation and reaction of molten Al-alloy into two types of commercial Al2O3-SiO2 fibrous insulation board. The growth rate, composition and microstructure of these materials were described. An AlZnMg(7075) alloy was selected as a parent alloy. Mixed polycrystalline fiber and glass phase fiber were used as a filler. The growth surface of an alloy was covered with and without SiO2. SiO2 powder was employed as a surface dopant to aid initial oxidation of Al-alloy. Al-alloy, SiO2, fiber block and growth inhibitor CaSiO3 were packed sequentially in a alumina crucible and oxidized in air at temperature range 90$0^{\circ}C$ to 120$0^{\circ}C$. The growth rate of composite layer was calculated by measuring the mass increasement(g) per unit surface($\textrm{cm}^2$). XRD and optical microscope were used to investigate the composition and phase of composites. The composite grown at 120$0^{\circ}C$ and with SiO2 dopant showed rapid growth rate. The growth behavior differed a little depending on the types of fiber used. The composites consist of $\alpha$-Al2O3, Al, Si and pore. The composite grown at 100$0^{\circ}C$ exhibited better microstructure compared to that grown at 120$0^{\circ}C$.

• 한국토양비료학회지
• /
• 제12권3호
• /
• pp.153-167
• /
• 1979

수도(水稻)의 생산능력(生産能力)을 최대(最大)한 발현(發顯)시키는데 필요(必要)한 시비량(施肥量) 결정방법(決定方法)을 시도(試圖)했다. 이 시도(試圖)에서는 양분(養分)의 균형적(均衡的) 공급(供給)을 토양특성(土壤特性)과 품종(品種)의 특성(特性)에 바탕을 두어 공식화(公式化)하고저 했으며, 과거(過去)에 실시(實施)된 시험성적(試驗成績)들을 이용(利用)하여 그 타당성(妥當性)을 검토(檢討)했다. 그 요지(要旨)는 다음과 같다. 1. 다수확(多收穫)을 도모(圖謀)할 경우(境遇), 양분(養分)의 균형적(均衡的) 공급(供給)이 매우 중요(重要)하다. 2. 규산(珪酸)은 시용(施用)된 질소(窒素)를 고수량(高收量)으로 연결(連結)시키는데 중요(重要)한 역할(役割)을 한다. 3. 수량(收量)에 가장 결정적(決定的)인 몫을 하는 질소(窒素)의 시용량(施用量)은 토양중(土壤中) 유기물(有機物) 및 유효규산(有效珪酸)의 비(比) 즉(卽) $SiO_2$/O.M. 비(比)를 참작(參酌)함이 타당하다. 4. $SiO_2$/OM. 비(比)를 근거(根據)로 질소시용량(窒素施用量)을 결정(決定)코저 할 경우(境遇), 수도(水稻)의 품종적(品種的) 특성(特性)이 고려(考慮)돼야한다. 그 까닭은 품종별(品種別)로 토양중(土壤中) 유기물(有機物) 함량(含量)에 영향(影響)받는 정도(程度)가 상이(相異)하기 때문이다. 5. 토양(土壤)에 규산질(珪酸質) 비료(肥料) 혹(或)은 유기물(有機物)의 시용(施用)으로 $SiO_2$/O.M. 비(比)를 변화(變化)시킬 수 있으며 이에 따라 질소량(窒素量)도 변동(變動)시킬 수 있다. 이 때에 수도품종(水稻品種)의 특성(特性)이 고려(考慮)돼야 한다. 6. 질소시용량(窒素施用量)을 이와 같이 결정(決定)한 다음 가리(加里)의 시용량(施用量)은 질소량(窒素量)과 토양중(土壤中) K/Ca+Mg 비(比)를 토대(土台)로 산출(算出)할 수 있다.

• 자원리싸이클링
• /
• 제6권3호
• /
• pp.3-8
• /
• 1997

I사의 전기로 제강 슬래그(이하 슬래그)는 상당량의 금속철(metal Fe)과 wustite(FeO), magnetite(Fe$_3$O$_4$), gehlenite(${CaAl}_{2}{SiO}_{7}$) 및 monticellite(CaMgSiO$_4$)등으로 구성된다. 슬래그에 함유된 금속철(Fe 품위: 95%이상)을 회수하기 위해서는 금속철을 단ㄱ체로 분리시키는 것이 바람직하며, 매립으로 활용할 수밖에 없는 슬래그를 단계적으로 파쇄하면 대부분의 금속철은 구상의 단체로 분리된다. 구상의 단체인 금속철의 크기에 따라 흡인되는 자장의 세기를 측정하면 금속철이 흡인되는 최소 자장의 세기는 약 100G로 거의 일정하다. 다단계로 파쇄한 슬래그를 100G의 자장에서 회수한 산물은 95%이상의 철분이 함유된 금속철이었으나, 자장의 세기를 증가시키면 철의 산화물 및 알칼리 토금속류의 화합물등도 함께 회수되므로 품위가 저하된다. 따라서 매립되는 슬래그를 다단계로 파쇠하고, 각 입도에서 100G로 자선하면 파쇄된 슬래그에 함유된 대부분의 금속철을 회수할 수 있다. I사에서 매립하는 35만톤의 슬래그를 다단계로 파쇄하는 경우에, 30~4.7mm의 입도에서는 매립되는 전체 슬래그중의 약 0.73%인 2천 5백톤 정도의 금속철이 100G의 자장에서 회수될 수 있고, 4.7~0.3mm서도 약 1.2%인 4천 2백톤 정도가 회수될 수 있다. 그러므로 자력선별로 회수할 수 있는 금속철은 매립되는 슬래그중의 약 1.9%인 6천 7백톤 정도가 된다.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.

• 한국화재소방학회논문지
• /
• 제16권4호
• /
• pp.15-19
• /
• 2002

BaTiO$_3$계 PTC 서미스터의 조성개발을 위해 (Ba$_{0.95-x}$S $r_{0.05}$C $a_{x}$)$TiO_3$-$0.01TiO_2$-$0.01SiO_2$-$\alpha$MnCO_3$-$\beta$Nb_2$o_{5}$와 같은 실험조성식을 설정한 후 최적 조건하에서 적층형 PTC시편을 제작하여 실험하였다. 실험 결과, 시편제조시의 최적 소결온도와 냉각속도는 각각 $1350^{\circ}C$-2 hour및 $100^{\circ}C$/h였다. 또한 상온저항을 낮추는 효과가 있는 Dopant로서의 Ca와 Mn 그리고 피크(peak)저항값을 높일 수 있는 Nb를 Ca:5 mol%, Mn:0.08 mol%, Nb:0.18 mol%로 함으로써 비교적 낮은 상온저항과 높은 피크(peak)저항 및 양호한 온도계수 특성이 나타났으며, 화재감지센서로서의 활용 가능성을 확인하였다.다.다.