• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.29-34
• /
• 2019

SiC는 큰 에너지 밴드 갭을 갖고, 불순물 도핑에 의해 p형 및 n형 전도의 제어가 용이해서 고온용 전자부품 소재로 활용이 가능한 재료이다. 특히 $N_2$ 분위기, $2000^{\circ}C$에서 ${\beta}-SiC$ 분말로부터 제조한 다공질 n형 SiC 반도체의 경우, $800{\sim}1000^{\circ}C$에서의 도전율 값이 단결정 SiC와 비교해서 비슷하거나 오히려 높은 값을 나타내었으며, 반면에 열전도율은 치밀한 SiC 세라믹스와 비교시 1/10~1/30 정도로 낮은 값을 나타내었다. 본 연구에서는 소결온도를 낮추기 위해 n형 ${\beta}-SiC$에 함침 시킨 polycarbosilane (PCS)의 열분해에 의한 반응소결 공정 ($1400{\sim}1600^{\circ}C$)으로 다공질 소결체를 제작하였다. 함침 및 소결공정($N_2$ 분위기, $1600^{\circ}C$, 3시간)을 반복함에 따라 상대밀도는 크게 증가하지 않았지만 Seebeck 계수 및 도전율은 크게 증가하였다. 본 연구에서의 열전변환 효율을 반영하는 power factor는 고온에서 상압소결 공정으로 제작한 다공질 SiC 반도체에 비해 1/100~1/10 정도 작게 나타났지만, 미세구조 및 캐리어 밀도를 정밀하게 제어하면, 본 연구에서의 반응소결 공정으로 제작한 SiC 반도체의 열전물성은 크게 향상될 것으로 판단된다.

• 한국패류학회지
• /
• 제20권1호
• /
• pp.35-43
• /
• 2004

To know the effects on temperature and body size on the clearance rate (CR) of a small tidal flat bivalve, Coecella chinensis, laboratory experiments were performed with 20 individuals of different sizes (ranging from 7 to 25 mm) at 3 different temperatures (10, 15, $20^{\circ}C$). The relationship between body size and CR was determined by an allometric equation. The CR of C. chinensis varied greatly ranging from 0.003 to 0.103 L/individual/hr. Both temperature and body size affected significantly on the CR of C. chinensis. The CR at $20^{\circ}C$was 1.5 times higher than that at $15^{\circ}C$ and 2.8 times than $10^{\circ}C$. The temperature coefficient ($Q_10$) between 10 and $15^{\circ}C$ was higher than that between 15 and $20^{\circ}C$, which indicates that C. chinensis changes its CR more rapidly in lower temperature range. As body size increased, the CR increased more than 10-fold at all temperatures. The CR relative to flesh dry weight (FDW) were fitted well to the power function: CR = a ${\times}$ $(FDW)^b$. The exponent value (b) of the fitted equation ranged from 0.64 to 0.70, which are similar to those of other bivalves. The weight-specific CR ($CR_w$) was still affected by body size (p < 0.05). This implies that smaller individuals require more energy per unit biomass for growth, and the energy requirement for growth decreases as body size increases.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.483-488
• /
• 2016

Ultrasound imaging by using piezoelectric materials, such as lead zirconium titanate (PZT) has been one of the most preferred modes of imaging in the medical field due to its simple, low cost and non-ionizing radiation in comparison to other imaging techniques. Recently, the market demand for portable ultrasound is becoming larger with applications in developing countries, disaster area, military, and emergency purposes. However, most of ultrasound probes used is bulky and high power consumable, so unsuitable for such applications. In this study, the 3 layered ceramic specimen consisted of 128 pitches of $420{\mu}m$ in width and $450{\mu}m$ in thickness were prepared by using the Ti-rich PZT compositions co-fired at $1,050^{\circ}C$. Their electrical and ultrasound pulse-echo properties were investigated and compared to the single layer specimen. The 3 layered ultrasound probe showed 1.584 V of Vp-p, which is 3.2 times higher than single layered one, implying that it would allow effectively such a portable ultrasound probe system. The result were discussed in terms of higher capacitance, lower impedance and higher dielectric coefficient of the 3 layered ultrasound probe.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.353-359
• /
• 2000

마그네트론 스퍼터링법으로 p형 ($Bi_{0.15}Sb_{0.85})_2Te_3$과 ($Bi_{1-x}Sb_x)_2Te_3$ 열전박막을 제조하여 스퍼터 증착 조건 및 $Sb_2Te_3$ 함량에 따른 열전특성을 분석하였다. Corning glass 기판을 10rpm으로 회전시키며 DC 스퍼터링법으로 $300^{\circ}C$에서 증착한($Bi_{0.15}Sb_{0.85})_2Te_3$ 박막은 $(Bi, Sb)_2Te_3$ 단일상으로 결정화가 완료되고 c축 우선배향성을 나타내었으며, 다른 조건으로 증착한 ($Bi_{0.15}Sb_{0.85})_2Te_3$ 박막보다 높은 185 $\mu$V/K의 Seebeck 계수를 나타내었다. p형(Bi$_{1-x}$ Sb$_{x}$)$_2$Te$_3$ (0.77$\leq$x$\leq$ 1.0) 박막에서는 Sb$_2$Te$_3$ 함량이 증가함에 따라 Seebeck 계수와 전기비저항이 감소하였으며($Bi_{1-x}Sb_x)_2Te_3$조성에서 $0.79\times10^{-3}W/K^2$-m의 최대 출력인자를 나타내었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.53-61
• /
• 1994

An experimental study on heat pump cycle systematizing characteristics for non-azeotropic refrigerant mixtures of R-22+R-114 was reported. Data were obtained under steady state condition at the ranges of parameters, 550- 2, 170kcal/h, 670-2, 990kcal/h, 24-71kg/h, and 0-1, for as cooling capacity, heating capacity, mass 25, 50, 75, and 100 per cent of R-22 by weight fraction for R-22+R-114 mixtures. The results shown that the C.O.P of the 50wt% of R-22 mixture was considerably larger than for pure R-22 and other weight fraction of R-22 mixtures, but the compression power of the 25wt% of R-22 was lower than that of the pure R-22 and the other weight fraction of R-22 mixtures. The hightest value of cooling capacity was obtained at the conditions of evaporating temperature 5.deg.C and R-22 50wt% mixture. In general, with an increase in the R-22 weight fraction for fixed values of the other parameter, the cooling capacity increased at first, obtained a maximum, and then decreasd. This verified the importance of accurate weight fractions od refrigerant mixtures in the heat pump cycle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.149-152
• /
• 1997

High-power piezoelectric materials are being developed for applications such as actuators and ultrasonic motors. In this paper, ferroelectric property of iron-doped 0.57 (Sc$_{1}$2//Nb$_{1}$2/)O$_3$-0.43 PbTiO$_3$. which is the morphotropic phase boundary composition for the PSN-PT system, was investigated. The maximum dielectric constant ( $\varepsilon$$_{33}$/$\varepsilon$$_{0}$ = 2551) and the minimum dielectric loss(tan $\delta$ = 0.51 %) at room temperature were obtained at 01. wt% and 0.3 wt% of iron additions. With additions of the Fe$_2$O$_3$ the electromechanical coupling factor of radial mode k$_{p}$ and the piezoelectric coefficient d$_{33}$ were slightly decreased, on the other hand the mechanical quality factor was increased significantly. The highest mechanical quality factor (Qm= 297) was obtained at 0.3 wt% Fe$_2$O$_3$, which is 4.4 times larger than that of pure 0.57 PSN-0.43PT ceramics. The temperature dependence of the dielectric constant and dielectic loss was observed between 2$0^{\circ}C$ and 35$0^{\circ}C$ .X> .X> .

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.611-617
• /
• 2021

The mechanical properties of α-Na₃(U_0.84(2),Na_0.16(2))O₄ have been researched using the first-principles calculations combined with the quasi-harmonic Debye model. The obtained lattice parameters agree well with the published experimental data. The results of elastic constants indicate that α-Na₃(U_0.84(2),Na_0.16(2))O₄ is mechanically stable. The polycrystalline moduli are predicted. The results show that the α-Na₃(U_0.84(2),Na_0.16(2))O₄ exhibits brittleness and possesses obvious elastic anisotropy. The hardness shows that it can be considered a "soft material". Furthermore, the Debye temperature θ_D and the minimum thermal conductivity k_min are also discussed, respectively. Finally, the thermal expansion coefficient α, isobaric heat capacity C_P and isochoric heat capacity C_V are evaluated through the quasi-harmonic Debye model.

• 임상간호연구
• /
• 제30권1호
• /
• pp.24-34
• /
• 2024

Purpose: This study aimed to identify factors influencing nurses' intention to care for COVID-19 patients based on the theory of planned behavior, and to test the moderating effect of perceived behavior control between attitude, subjective norms, and nurses' intention to care. Methods: The participants were 167 nurses working at two designated hospitals for infectious diseases located in J and C city, South Korea. Data were collected from October 10th to 25th, 2020, and analyzed using independent t-test, ANOVA, and Pearson correlation coefficient, and hierarchical multiple regression analysis. The moderating effect was analyzed using the Process Macro model 1 (95% confidence interval, 10,000 bootstrapping), and a simple slope analysis was performed to identify the moderating effect of perceived behavior control. Results: The factors affecting nurses' intention to care for patients with COVID-19 were attitude toward the behavior (β=.32, p<.001) and perceived behavior control (β=.37, p<.001) in model 1, attitude toward the behavior (β=.28, p<.001) and perceived behavior control (β=.36, p<.001), and perspective taking (β=.26, p<.001) in model 2. The explanation power of this model was 65.0% (F=18.41, p<.001). The moderating effect of perceived behavioral control was statistically significant in the relationship between subjective norms and intention to care for patients with COVID-19 (F=16.37, p<.001). In the simple slope analysis, the reinforcement effect was greatest when the level of perceived behavioral control was at the mean (95% CI=0.46~0.67) and high (95% CI=0.70~1.08). Conclusion: Developing and applying a training program that enhances confidence and improves empathy is necessary to increase nurses' intention to care for COVID-19 patients.

• Biomolecules & Therapeutics
• /
• 제9권4호
• /
• pp.291-297
• /
• 2001

The bioequivalence of two triflusal products was evaluated with 20 healthy volunteers following single oral dose according to the guidelines of Korea Food and Drug Administration (KFDA). Trisa $l^{R}$ capsule (Whanin Pharm. Corp., Korea) and Disgre $n^{R}$ capsule (Myung-In Pharm. Corp., Korea) were used as test product and reference product, respectively. Both products contain 300 mg of trifusal. One capsule of test product or reference product was orally administered to the volunteers, respectively, by randomized two period crossover study (2$\times$2 Latin square method). Blood samples were taken at predetermined time intervals for 4 hours and the determination of trifusal was accomplished using semi-microbore HPLC equipped with automated column switching system. The analytical method with HPLC was validated according to the Bioanalytic Method Validation guideline by F7A prior to determining the plasma samples. The pharmacokinetic parameters (AU $C_{0-4h}$ $C_{max}$ and $T_{max}$) were calculated and ANOVA test was utilized for statistical analysis of parameters. As a result of the assay validation, the limit of quantification of trifusal in human plasma by current assay procedure was 50 ng/ml using 500 $\mu$l of plasma. The accuracy of the assay was from 97.76% to 116.51% while the intra-day and inter-day coefficient of variation of the same concentration range was less than 15%. Average drug concentration at the designated time intervals and pharmacokinetic parameters calculated were not significantly different between two products (p>0.05). The difference of mean AU $C_{olongrightarrow4hr}$, $C_{max}$, and $T_{max}$ between the two products (2.92, 4.39, and -2.44%, respectively) were less than 20%. The power (1-$\beta$) and treatment difference ($\Delta$) for AU $C_{olongrightarrow4hr}$ and $C_{max}$ were more than 0.8 and less than 0.2, respectively. Although the power for $T_{max}$ was under 0.8, $T_{max}$ of the two products was not significantly different from each other (p>0.05). These results satisfied the criteria of KFDA guideline for bioequivalence, indicating the two products of triflusal were bioequivalent.quivalent.ent.ent.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.271-274
• /
• 2002

본 논문에서는 광센서용 광원에 적합한 1.55$\mu\textrm{m}$ 파장대의 InGaAsP/InP 반도체레이저를 제작하였다. 레이징을 억제시켜주기 위해서 bending type의 소자를 설계 및 제작하였으며, 제작된 소자의 출력은 펄스 구동전류 100㎃에서 1.6㎽이고, 스펙트럼 폭은 40nm의 값을 가졌다. 그리고, 제작된 광원을 적용하였을 때 광섬유 자이로스코프에 파이버 종단에서의 출력은 $25^{\circ}C$, 직류 100㎃에서 540㎻였고, 스펙트럼 폭은 53nm였다. 그리고, 불규칙잡음 계수는 2.5$\times$10­$^3$deg/√hr였고, 자이로 출력 drift도 잡음수준으로 조사되었다. 따라서, 본 연구에서 제작한 광원을 광섬유 자이로 스코프에 사용 가능함을 확인하였다.