• Cement
• /
• s.66
• /
• pp.12-15
• /
• 1977

석회석과 고로수재 slag을 1.6 : 1로 혼합 분쇄한 원료를 1,450$^{\circ}C$에서 소결하여 고$C_3A$ clinker를 얻었다. 이 clinker 중에는 $C_3S$ 40$\%$, $C_2S$ 31$\%$, $C_3A$ 22$\%$, $C_4AF$ 2$\%$를 함유하고 있으며 보통 크링카 보다 $C_3A$ 함량이 2$\~$3배 정도 높고, clinker 색은 연두색을 띄는 것이 특색이다. 이와 같이 $C_3A$ 함량이 높은 시멘트의 특성 및 제조 가능성을 검토한 결과는 다음과 같다. 1) 석회석과 slag를 1.6 : 1(61.5$\%$ : 38.5$\%$)로 사용할 경우 보통 시멘트 제조시 석회석 사용량 보다 약 28$\%$ 정도 절감되나 고품위의 석회석이 요구된다. 2) 동일 free CaO 0.4$\%$를 기준으로 소성할 경우 고$C_3A$ clinker가 보통 clinker 보다 소성 시간이 20분 단축된다. 3) carbonate 분해열을 비교하면 고$C_3A$ 시멘트 원료가 보통 시멘트 원료보다 116Kcal/$\cal{kg}$-cl 절감된다. 4) $C_3A$ 함량이 높아 가소성이 저하되고 표준연도의 시멘트 paste를 얻기 위하여서는 보통 시멘트 보다 많은 물량이 요구되며 응결시간도 빠르다. 5) Blaine 3,000$cm^3$/g으로 분쇄한 고$C_3A$ 시멘트의 3 일강도는 보통 시멘트 보다 40$\~$50$\cal{kg}$/$cm^3$ 더 높으나 28 일 강도는 다소 저하되는 경향이며 Blaine 5,000$cm^2$/g으로 분쇄한 고$C_3A$ 시멘트는 조강 시멘트와 같은 강도 수준이다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.873-880
• /
• 1995

In order to prepare the modified belite (C2S-C4A3S-C4AF-CS) cement with low energy, clinkers were synthesized by converter slag, limestone, gypsum and clay. The synthesized clinkers were characterized and the hydration processes were investigated by XRD, SEM and microconduction calorimetry. The hydrates were mainly C-S-H and ettringite. The needle-like ettringite formed by the hydration of C4A3S at the early stage of hydration was filled in the inner vacant spaces of the hardened body and it might contribute to the rapid-hardening phenomena. The hardened body became stronger due to the hydration of C2S at the later period. The compressive strengths of the cement-3 mortars hydrated for 3, 7 and 28 days were 115, 128 and 211 Kgf/$\textrm{cm}^2$, respectively.

• Journal of Microbiology
• /
• v.35 no.3
• /
• pp.188-192
• /
• 1997

The strain of S-47 degrading 4-chlorobenzoic acid (4CBA) was isolated from Ulsan chemical industrial complex by enrichment cultivation with 1 mM 4CBA. The strain was Gram-negative rod and grew optimally at 30.deg.C and pH 7 under aerobic condition, so that the organism was identified as a species of Pseudomonas. Pseudomonas sp. S-47 degraded 4-chlorobenzoic acid to produce a yellow-colored meta-cleavage product, which was confirmed to be 5-chloro-2-hydroxymuconic semialdehyde (5C-2HMS) by UV-visible spectrophotometry. 5C-3HMS was proved trometry. This means that Pseudomonas sp. S-47 degraded 4CBA via 4-chlorocatechol to 5C-2HMS by meta-cleavage reaction and then to 5C-2HMA by 5C-2HMS dehydrogenase.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.517-526
• /
• 1990

The crystal structures of two alditol acetates, D-glucitol hexaacetate and xylitol pentaacetate, have been determined by diffraction methods with Mo-K$\alpha$radiation, using direct methods for phase determinations. The crystal data are: for D-glucitol hexaacetate, P2$_1$, with a = 10.275 (2), b = 8.363 (1), c = 12.560 (5) $\AA;\beta$ = 95.97 $(2)^{\circ}$, Z = 2; for xylitol pentaacetate, P2$_1$/C with a = 18.126 (1), b = 11.422 (2), c = 8.649 (1) $\AA$, $\beta = 95.03 (1)^{\circ}$, Z = 4. Both molecules have extended zigzag carbon chain conformations which differ from previous studies of the structures of D-glucitol and xylitol and also differ from NMR studies on alditol acetates. The bond lengths and angles are normal, with mean values over both structures of C($sp^3)-C(sp^3): 1.514 (10),\; C(sp^3)-O: 1.444 (6),\; C(sp^2)-O: 1.347 (9),\; C(sp^2)=O: 1.197 (6),\; C(sp^2)-C(sp^3): 1.479(9){\AA},\; C(sp^3)-C(sp^3)-C(sp^3): 114.6 (17),\; O-C(sp^3)-C(sp^3): 109.4 (23),\; C(sp^2)-O-C(sp^3): 117.4 (6),\; O=C(sp^2)-O: 122.6 (6),\; C(sp^3)-C(sp^2)-O: 111.8 (7),\; C(sp^3)-C(sp^2)=O: 125.5 (4)^{\circ}$. The atoms of acetate groups are in coplanar. There are no particularly short intermolecular contacts and the molecules are held together by van der Waals force only.

• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.46-51
• /
• 2000

The molecular structures of 2-SC₄H₃CH=NN(H)C/sub 6/H/sub 5/(C/sub 11/H/sub 10/N₂S) and (GaMe₂)₂(2-SC₄H₃CH=NNC/sub 6/H/sub 5/)₂(C/sub 26/H/sub 30/Ga₂N₄S₂) have been determined by X-ray diffraction. Crystallographic data for 2-SC₄H₃CH=NN(H)C/sub 6/H/sub 5/:orthorhombic space group P2₁2₁2₁, a=6.108(1)Å, b=7.593(1)Å, c=22.356(2)Å, V=1037.1(3)ų, Z=4, R=0.0613. Crystallographic data for (GaMe₂)₂(2-SC₄H₃CH=NNC/sub 6/H/sub 5/)₂:monoclinic space group P2₁/n, a=15.996(2) Å, c=9.879(3)Å, β=100.07.(2)°, V=2764.599)ų, Z=4, R=0.0503.

• Journal of Embryo Transfer
• /
• v.27 no.1
• /
• pp.51-55
• /
• 2012

The objective of this study was to investigate the motility and kinematics of boar sperm that while stored at 4C. The samples of fresh boar semen were place into an extender, Androhep, and stored at $4^{\circ}C$. In three of these samples, cryoprotectants were added. The sperm's motilities and kinematics were evaluated by using microscope (${\times}400$) and the viability status was evaluated by using with eosin staining method. The 5 sample groups are; Goup A:Androhep (extender), stored at $17^{\circ}C$. Group B:Androhep (extender), stored at $4^{\circ}C$. Group C:Androhep (extender), + 3% glycerol (cryoprotectant), stored at $4^{\circ}C$. Group D:Androhep (extender), + 3% DMSO (cryoprotectant), stored at $4^{\circ}C$. Group E:Androhep (extender), + 3% ethylene glycol (cryoprotectant), stored at $4^{\circ}C$. In group A, the sperm's motility was reduced. On day one the sperm's motility was ($85.7{\pm}2.3$) and day 5 the motility was ($43.9{\pm}3.3$). In group B, C and D the sperm's motility were reduced to 0 on day 5. In group E the sperm's percentage of motility decreased. On day one the sperm's motility was ($42.0{\pm}0.5$) and day 5 the motility was ($2.3{\pm}0.3$). When comparing cryoprotectant in samples of boar sperm there is a slight improvement in the results when the use of Androhep Lite (extender), + 3% ethylene glycol (cryoprotectant), stored at $4^{\circ}C$ are used. Based on these results, ethylene glycol can protect sperm from heat shock at $4^{\circ}C$, but not satisfactory level. However, it showed the possibilities of liquid semen preservation at $4^{\circ}C$ by using cryoprotectant.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.352-358
• /
• 2014

We were investigated the stability through the electrochemical characteristics of saturated fatty acid(C12, C14, C16, C18) monolayer LB films by cyclic voltammetry. Saturated fatty acid monolayer LB films was deposited on the indium tin oxide(ITO) glass by the LB method. The electrochemical properties were measured by cyclic voltammetry with a three-electrode system in 0.1 N $NaClO_4$ solution. The measuring range was continuously oxidized to 1650 mV, with an initial potential of -1350 mV was reduced. Scanning rates of 50, 100, 150, 200, and 250 mV/s were set. As a result, LB monolayer films of saturated fatty acid were appeared on irreversible processes by the oxidation current from the cyclic voltammogram. Diffusion coefficient(D) of saturated fatty acid(C12, C14, C16, and C18) was calculated 22.231, 2.461, 7.114 and 2.371 ($cm^2s^{-1}{\times}10^{-4}$) in 0.1 N $NaClO_4$ solution, respectively.

• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.389-397
• /
• 2017

Friedel's salt is an important product of chemical adsorption between cement hydrate and chloride ions because it contains chlorine in its structure. When cement reacts with water in the presence of chloride ions, the $C_3A$ phase, and $C_4AF$ phase react with chloride to produce Friedel's salt. If chloride ions penetrate into concrete from external environments, many calcium aluminate hydrates, including AFm, can bind chloride ions. It is very important, therefore, to investigate the chloride binding isotherm of $C_3A$ phase, $C_4AF$ phase, and AFm phase to gain a better understanding of chloride binding in cementitious materials. Meanwhile, the adsorption isotherm can provide us with the fundamental information for the understanding of adsorption process. The experimental results of the isotherm can supply not only the quantitative knowledge of the cement-Friedel's salt system, but also the mechanism of adsorption and the properties of their interactions. The purpose of this study is to explore the time dependant behaviors of chloride ions adsorption with $C_3A$, $C_4AF$ and AFm phases. The chloride adsorption isotherm was depicted with Langmuir isotherm and the adsorption capacity was low in terms of the stoichiometric point of view. However, the chloride adsorption of AFm phase was depicted with Freundlich isotherm and the value was very low. Since the amount of the adsorption was governed by temperature, the affecting parameters of isotherm were expressed as a function of temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.317-322
• /
• 2016

While PFOS sodium salt ($C_8F_{17}SO_3Na$) was not degraded by microorganisms for 28 days, the 4 alternatives were biodegraded at the rates of 21.6% for $C_{25}F_{17}H_{32}S_3O_{13}Na_3$, 20.5% for $C_{15}F_9H_{21}S_2O_8Na_2$, 15.8% for $C_{23}F_{18}H_{28}S_2O_8Na_2$ and 6.4% for $C_{17}F_9H_{25}S_2O_8Na_2$, respectively. The acute toxicity test using Daphnia magna was conducted for 48 hours, the half effective concentration ($EC_{50}$) of PFOS sodium salt ($C_8F_{17}SO_3Na$) was evaluated in 54.5 mg/L. While the 4 alternatives did not show any effect at 500.0 mg/L. The surface tension of the PFOS salt ($C_8F_{17}SO_3Na$) is 46.2 mN/m at a concentration of 500.0 mg/L. While the surface tension of the 4 alternatives was found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$). The surface tension of $C_{23}F_{18}H_{28}S_2O_8Na_2$ (20.9 mN/m) has the lowest, followed by $C_{15}F_9H_{21}S_2O_8Na_2$ (23.4 mN/m), $C_{17}F_9H_{25}S_2O_8Na_2$ (27.3 mN/m), $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ (28.2 mN/m). The four kinds of alternatives ($C_{15}F_9H_{21}S_2O_8Na_2$, $C_{17}F_9H_{25}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$, $C_{25}F_{17}H_{32}S_3O_{13}Na_3$) were found to be superior to PFOS sodium salt ($C_8F_{17}SO_3Na$) in terms of biodegradation, Daphnia sp. acute toxicity and surface tension, and thus they were considered applicable as PFOS alternatives. Especially biodegradation rate of $C_{15}F_9H_{21}S_2O_8Na_2$, $C_{23}F_{18}H_{28}S_2O_8Na_2$ and $C_{25}F_{17}H_{32}S_3O_{13}Na_3$ was relatively high as 15.8~21.6%, and Daphnia sp. acute toxicity and surface tension were considerably superior (surface tension 39~55%) to PFOS sodium salt. Therefore, these alternatives are considered to be available as an alternative of PFOS.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.