• 콘크리트학회논문집
• /
• 제29권4호
• /
• pp.389-397
• /
• 2017

시멘트내 $C_3A$상과 $C_4AF$상은 염소이온과 반응하여 프리델염을 생성한다. 프리델염은 구조체에서 염소를 포함하기 때문에 염소이온의 흡착에 매우 중요하다. 외부에서 염소이온이 침투하면, 칼슘 알루미네이트 수화물은 염소이온을 고정하므로, $C_3A$상과 $C_4AF$상 및 AFm상의 염소 흡착 거동을 고찰하는 것은 고정화 현상을 이해하는데 매우 중요하다. 한편, 흡착 등온은 시멘트와 프리델염의 상호관계에서 정량적인 지식을 제공할 뿐만 아니라 그 상호관계의 특성을 이해하는데 매우 중요하다. 본 연구의 목적은 $C_3A$상, $C_4AF$상 및 AFm상의 염소이온 흡착 거동을 고찰하는데 있다. $C_3A$상과 $C_4AF$상의 흡착등온은 이론적 화학당량보다 다소 낮았으며 Langmuir 흡착등온식으로 표현할 수 있었다. AFm상의 흡착등온은 이론적 화학당량보다 매우 낮았으며, Freundlich 흡착등온식으로 표현하였다. 또한 흡착등온 모델에서 온도의 영향 매개변수를 실험범주내에서 온도의 함수로 제안하였다.

• 자원리싸이클링
• /
• 제14권5호
• /
• pp.13-17
• /
• 2005

용융전로슬래그를 일반 포틀랜드 시멘트로 활용하기 위하여, 용융슬래그와 $C_3A(3CaO{\cdot}Al_2O_3)$가 반응하여 시멘트의 구성상인 $C_4AF$가 생성되는 기구와 생성속도를 조사하고자 한다. 전로슬래그에 소정의 $SiO_2$를 첨가하여 MgO도가니에 넣고 $1300^{\circ}C{\sim}1350^{\circ}C$에서 30분간 가열 용해하여 균질화 한 후, 같은 온도로 가열해 둔 소결 $C_3A$펠렛을 투입하여 $10{\sim}30$분간 반응시켰다. 반응 후, 급냉한 시편을 도가니의 직경방향으로 절단해서 펠렛 단면의 $C_3A$직경 변화를 측정하여 $C_3A$의 용해속도를 조사하고, 계면반응 생성상을 SEM/EDX로 관찰하였다. 그 결과 $C_3A$ 펠렛의 슬래그로의 용해속도는 $1300^{\circ}C$에서 $0.75{\times}10^{-4}(cm/sec)$으로부터 $1350^{\circ}C$에서 $1.67{\times}10^{-4}(cm/sec)$으로 증가하였으며, 슬래그와 $C_3A$ 펠렛 사이에 $C_4AF$와 $C_{12}A_7$의 혼합층이 생성됨을 알 수 있었다.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1163-1169
• /
• 1996

The effects of borax on the phase formation of C2S, C4A3 and $\alpha$'-C2S phases. It has negative effects on formation of C4A3 And it lowers the forming temperature of C4AF. It also has been found that borax improves the clinkerization of MBC. In the MBC clinker with borax 3% C2S have larger and more irregular shapes, larger C/S mole ratio and C4A3 have smaller size larger C/ molr ratio than in the clinker without borax.

• 한국세라믹학회지
• /
• 제22권1호
• /
• pp.5-10
• /
• 1985

The effect of calcium lignosulfonate (CLS) on the early hydration characteristics for clinker minerals was investigated. In the presence of CLS and unsufficient gypsum The hydration of $C_3$A lowered CLS adsorption to form ettrin-gite and the residual CLS in the liquid phase accelerated the solubility of C4AF hydration. As the result unreacted $Fe^{3+}$ in the liquid phase would be precipitated gelatinously on $C_3$ hydrates and the hydration of $C_3$ could be retarded. But by addition of optimum gypsum into the cement with CLS the presence of $Fe^{3+}$ in the liquid phase were lowered and $C_3$ hydration would be normallized.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 1983

The investigations have been carried out to study the characteristics of limestone using in Korean cement industry with prime interests in the dissociation and thermal phase changes of limestone between 90$0^{\circ}C$ and 140$0^{\circ}C$ The range of decomposition temperature of limestone was 840-87$0^{\circ}C$ and it was considered that the temperature was lowered by impurities in the limestone. The more the impurities and the finer the grain size of quartz in limestone the lower temperature was applied in forming $C_2S$ mineral the temperature of about 100$0^{\circ}C$. The major clinker minerals such as $C_3S$, $C_2S$, $C_3A$ and $C_4AF$ were formed in most of limestone when the firing temperature was up to 130$0^{\circ}C$.

• 자원리싸이클링
• /
• 제15권2호
• /
• pp.3-9
• /
• 2006

용융전로슬래그로부터 일반 포틀랜드 시멘트로의 전환에 관한 기초 연구의 일환으로, 전로슬래그의 $Al_{2}O_{3}$ 농도에 따를 고체 CaO 입자와 용융슬래그간의 계면반응을 알아보고자 하였다. 염기도($B=CaO/SiO_2$)를 1과 2로 조정한 전로슬래그에 소정의 $SiO_2$와 $5{\sim}15wt%\;Al_{2}O_{3}$를 첨가제로 첨가하여 MgO도가니에 넣고 $1500^{\circ}C$에서 30분간 가열 용해하여 균질화 한 후, 같은 온도의 소결 CaO펠렛을 투입하여 $10{\sim}30$분간 반응시켰다. 반응 후 급냉한 시편을 도가니의 직경방항으로 절단해서 펠렛 단면의 CaO직경 변화를 측정하여 슬래그중 $Al_{2}O_{3}$첨가에 따른 CaO의 용해속도를 조사하고, 계면 생성층을 SEM/EDX로 관찰하였다. 그 결과, 슬래그의 염기도가 2인 경우, 염기도가 1인 경우 보다 생성층 $C_{3}S$상의 두께는 $Al_{2}O_{3}$를 15wt.%까지 첨가함에 따라 3.5배 증가하였으며, $C_{6}AF_{2}$ 또는 $C_{4}AF$양도 2배 정도 증가됨을 알 수 있었다.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.43-48
• /
• 1983

The formation of strontium titanate from several molar $SrCO_3$ and $TiO_2$ mixtures was studied in air and $CO_2$ gas Mixtures of $SrCO_3$ and $TiO_2$ were heated in air at 400-$600^{\circ}C$ DTA-TG was used to obtain thermal histories of simples heated in air and $CO_2$ gas. X-ray diffraction analysis was used to determine both the phase composition and the amounts of each phase present. The phase relationship of various compounds $SrTiO_3$, $Sr_2TiO_4$, $Sr_2Ti_3O_7$ and $Sr_4Ti_3O_{10}$ formed by the sintering in each composition was shown by the calibration curves. High temperature X-ray analysis was used to determine both the formation process and deformation process of each products. Small amount of SrTiO3 is formed first at the surface af contact SrTiO3 reacts with $SrCO_3$ to form Sr2TiO4 this is affected on the $CO_2$ pressure.

• 열처리공학회지
• /
• 제2권4호
• /
• pp.47-55
• /
• 1989

The effects of thermal cycle, aging heat treatment and Boron addition on the phase transformation characteristics and mechanical properties of the shape memory alloys of Cu-Zn-Al system, which was designed to operate about $80^{\circ}C$ by this research group, were studied. From the view point of the effects of thermal cycle on the phase transformation temperature change, it was found that up to 100 cycles Ms and Af points increased by $3-7^{\circ}C$ and Mf decreased a little bit and after that all of them were remain constant, and As point was not affected. All of the phase transformation temperatures were decreased $5-7^{\circ}C$ by aging heat treatment, at $140^{\circ}C$ for 24h however the effects of thermal cycle on aged alloys were same as on unaged alloys. As the thermal cycle increased the shape memory ability decreased a little up to 20 cycles, but above that it kept almost same ability. By Boron addition, grain size was refined from $1500{\mu}m$ to about $330{\mu}m$ and the hardness, fatigue property were improved but shape memory ability was lowered.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.