• The Korean Journal of Ecology
• /
• v.5 no.2_3
• /
• pp.123-131
• /
• 1982

The growth and the resistance of Amorpha fructicosa L. under water control was experimented in frames out of doors. The plant grew in a wagner's pot under water control. The soil moisture content was controlled at 5%, 10%, 15% and 20%. The growth of leaf, stem and root in the groups of 5% and 10% soil moisture content were different from values in the groups of 15% and 20%. The T/R ratio in the groups of 5% and 10% soil moisture content were different from the ratio in the groups of 15% and 20% soil moisture content. The T/R ratio of former was lower than the latter, but the C/F ratio of the former was higher than the latter. RGR and NAR of Amorpha fructicosa decreased in 5% and 10% soil moisture content but increased in 15% and 20% soil moisture content during growing period. The maximum values of RGR and NAR were respectively 0.089 and 0.080 at 20% soil moisture content. The highest value of LAR was 1.560 at 5% soil moisture content. RGR and NAR were comparatively affected by soil moisture content.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.356-360
• /
• 2019

To evaluate antioxidant capacities and total phenolic, flavonoid, and catechin contents of pure green tea packaged in tea bags, green tea bags of 10 commercial brands were purchased and analyzed. Considering commonly used infusion methods, green tea bags were extracted using 150 mL of spring water at $70^{\circ}C$ for 2 min. Ten brands of green tea showed a wide range of total phenolic content (46.3-93.9 mg gallic acid equivalents/g), total flavonoid content (10.3-21.7 mg catechin equivalents/g), and antioxidant capacities (88.8-175.6 mg and 87.9-183.5 mg vitamin C equivalents/g for DPPH and ABTS assays, respectively). Total catechin content of green tea ranged from 33.8-74.7 mg/g, which corresponded to 43.0-108.3 mg/150 mL of cup. Collectively, these results suggest that daily consumption of 3.8-12.5 cups of green tea packaged in tea bags meets the recommended daily intake of catechins in green tea extract as a health functional foods in Korea.

• Korean Journal of Microbiology
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1964

Yung Nok Lee (Dept. of Biology, Korea University) : Studies on the phosphate metabolism in Chlorella, with special reference to polyphosphate. Kor. J. Microbiol., Vol.2, No.1, p1-11 (1964). 1. Uniformly $^{32}P$-labeled Chlorella cells which were irradiated with Cobalt-60 gamma-rays of about 70, 000 $\gamma$ dose, were further grown in a standard "cold" medium ("hot".rarw."cold"), and some portions of the algae were taken out at the begining of, and at intervals during the culture, and subjected to analyze the contents of $^{32}P$- and total P in various fractions of the cell materials. Results obtained were compared with those of nonirradiated normal cells. 2. Amounts of phosphate in various fractions of the nonirradiated normal Chlorella cells were measured using uniformly $^{32}P$--labeled cells. Analysis of the $^{32}P$--labeled algal cells showed that the highest value in P-content was the fraction of RNA followed by those of lipid, polyphosphate "C" polyphosphate "B", DNA, nucleotidic labile phosphate compounds, polyphosphate "A" and protein. It was observed that content of total polyphosphates in a single Chlorella cell was almost equal to RNA-P content in the cell, and the amount of RNA-P was almost equal to ten times of DNA-P content. 3. When the $^{32}P$--labeled algae which were irradiated with gamma-rays were grown in a normal "cold" medium, phosphate contents in the fraction of DNA, nucleotidic labile phosphate compounds and protein decreased markedly, while the contents of phosphate in the fractions of polyphosphate "C" and potyphosphate "B" increased in comparison with those of unirradiated normal cells. So, it was considered that the pretreatment of above mentioned dose of gamma-ray inhibited DNA and protein synthesis from polyphosphate in Chlorella cells. 4. Proceeding the culture of $^{32}P$--labeled Chlorella in a "cold" standard medium, whose synthetic activity of DNA and protein from polyphosphate was disturded by gamma-ray irradiation, the amounts of $^{32}P$-in the fraction of polyphosphate "C" increased, in contrast with those of polyphosphate "B" fraction. According to these experimental results, it was inferred that polyphosphate "B" could transform into polyphosphate "C" in normal growing Chlorella cells.sults, it was inferred that polyphosphate "B" could transform into polyphosphate "C" in normal growing Chlorella cells.ing Chlorella cells.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.409-414
• /
• 1978

The total amount of lipid content in the mullet roe is 20.5%, and iodine value and unsaponifiable matters content are 118 and 38.7%, respectively. The lipid composition of the muscle, roe and liver of the mullet, Mugil cephalus, shows differences. Triglyceride, wax esters, and free fatty acids are mainly contained in the lipids of the muscle, roe and liver, respectively. The mullet roe lipids are mainly composed of 59.1% of wax esters with a trace of sterol esters, 26.9% of polar lipids with pigments, 9.0% of triglyceride plus a trace of free fatty alcohols and fatty acids, and 3.0% of sterol contaminated with a trace of fatty alcohols. The major fatty acids of wax esters are C16 : 0, 47.5%, C18 : 1, 23.0%, C16 : 3, 6.5%, C20 : 5, 4.0%, those of triglyceride are C16 : 1, 25.1%, C18: 1, 16.7%, C16 : 0, 16.3%, C22 : 1, 7.9%, C18 : 0, 5.5%, C22 : 6, 4.4%, and those of polar lipids are C16 : 0, 35.0%, C18 : 1, 24.7%, C16 : 1, 6.1%, C20 : 5, 5.3%, C22 : 6, 4.2%. The major alcohols of wax esters are 51.0% of cetyl alcohol, 18.2% of palmitoleyl alcohol, and 10.7% of oleyl alcohol, and considerable amounts of odd-numbered alcohols such as C15 : 0, C15 : 1, C17 : 0, C17 : 1 and C19 : 1 are also found.

• Journal of the Korean Ceramic Society
• /
• v.18 no.3
• /
• pp.171-181
• /
• 1981

Alkaline-earth porcelains have been prepared from mixture of kaolin, quartz, and synthetic calcines obtained by calcining a mixture of kaolin and more than two different kinds of alkaline-earth carbonates. They were magnesium, calcium and barium carbonates which are inexpensive and readily available. The vitrification behavior of the batch mixes was investigated in the firing range of 1240$^{\circ}$to 1380$^{\circ}$, in relation to the body compositions. It appeared that the density and the firing temperature depended largely on the content of alkaline-earth oxides in the body. These porcelains posses excellant dielectric properties, and are especially valuable as bases for deposited carbon resistors for which they were developed. An illustrative composition is 50% Dong Hwa kaolin, 22.4% Chang Shin quartz, 27.6% calcine. The composition of the calcine is 70% Dong Hwa kaolin, 10.7% BaCO3, 13.5% CaCO3, 5.8% MgCO3. The specific resistance of this body is $1.2{\times}10^{15}$ ohm-cm at 5$0^{\circ}C$, $2.5{\times}10^{14}$ ohm-cm 10$0^{\circ}C$, $2.5{\times}10^{13}$ ohm-cm at 15$0^{\circ}C$, $1.8{\times}10^{12}$ohm-cm at 20$0^{\circ}C$.

• Korean Journal of Microbiology
• /
• v.53 no.3
• /
• pp.216-218
• /
• 2017

We here provide the complete genome sequence of Bacillus thuringiensis C25, the strain showing antagonistic effects on fungal phytopathogens. The genome comprised of 5,308,062 bp with 35.32% G+C content of a circular chromosome and a plasmid containing 308,946 bp with 32.23% G+C content. The chromosome and plasmid genome included 5,683 protein coding DNA sequences, 107 tRNA and 42 rRNA genes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.463-466
• /
• 2001

In recent year, Ferroelectric BLT($Bi_{4-x}$La$_{x}$Ti$_3$O$_{12}$) is a promising candidate materials. This study was Practiced to make good conditions of BLT targets. In this study, calcination and sintering temperature were kept at 75$0^{\circ}C$, 110$0^{\circ}C$ for 2 hour respectively. the density obtained 7.612, 7.98, 7.877 g/㎤ as La$_2$O$_3$ contents were 0.0mol%, 0.25mo1%, 0.5mol%. Especially, the lanthanum content of 0.5 mol% measured C-axis (117) preferred orientation more than the others targets in the XRD. In $\varepsilon$$_{r}$-f relationship using by HP 4194 A impedance analyzer, the 0.5 mol% observed above 200 relative dielectric constant. but the dissipation factor was higher than others targets at 100Hz~13MHz range. SEM photograph with the content of La$_2$O$_3$ was observed like rod and plate types.types.s.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.12-19
• /
• 2006

For thermal adaptable fabrics, the polyurethane-urea microcapsules containing phase-change materials (PCMs: hexadecane, octadecane and eicosane) were successfully synthesized by interfacial polycondensation using 2,4-toluene diisocyanate (TDI)/poly(ethylene glycol) (PEG400)/ethylene diamine (EDA) as shell monomers and nonionic surfactant NP-12 in an emulsion system under stirring rates of $3,000{\sim}13,000$ rpm. The mean particle size of microcapsule decreased significantly with increasing the stirring rate up to 11,000 rpm, and then leveled off. The mean particle size increased with increasing the content and molecular weight (eicosane > octadecane > hexadecane) of PCMs at the same stirring rate. The mean particle sizes of microcapsules were found to decrease with increasing the NP-12 content up to 1.5 wt%, and thereafter increased a little. It was found that the melting temperature ($T_m$) and crystallization temperature ($T_c$) of three kinds of encapsulated PCMs and their enthalpy changes (${\Delta}H_m,{\Delta}H_c$) increased with increasing PCM contents. The encapsulation efficiencies (Ee) of hexadecane microcapsule linearly increased with increasing the content of hexadecane. It was found that the stable microcapsule containing 50 wt% of hexadecane could be obtained in this study. However, Ee of octadecane and eicosane microcapsules increased with increasing PCM's contents up to 40 wt%, and then decreased a little. By considering the encapsulation efficiency, it was found that the maximum/optimum contents of octadecane and eicosane microcapsules were about 40 wt%. By the dynamic thermal performance test, it was found that the maximum buffering levels of Nylon fabrics coated with hexadecane, octadecane, and eicosane microcapsules were about $-2.4/+2.9^{\circ}C,\;-3.6/+3.6^{\circ}C\;and\;-4.0/+4.7^{\circ}C$, respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.4
• /
• pp.231-238
• /
• 2000

Flake graphite cast irons with the high damping capacity have been used for the control of vibration and noise occurring in the members of various mechanical structures under vibrating conditions. However, the damping capacity which is morphological characteristics of graphite is one of the important factors in reducing the vibration and noise, but hardly any work has deal with this problem. Therefore, the authors have examined the damping capacity of various cast irons with alloying elements and studied the influences of the matrix structures, mechanical properties and morphological characteristics of graphite. The main results obtained are as follows: Effects of pouring temperature on the damping capacities and mechanical properties were investigated in 3.6%C cast iron. At $1400^{\circ}C$, specific damping capacity showed the maximum value, and decreased with increase pouring temperature. Mechanical properties showed opposite trend with the damping capacity. And then, effects of Ni on the damping capacities and mechanical properties have been investigated in 3.6%C gray cast iron. At 0.2%Ni content, specific damping capacity showed the maximum value, and decreased with further increase in Ni content. Graphite length also showed same behavior. This indicates that the specific damping capacity has a close relation with graphite length. In case of Mo addition in 3.6%C-0.2%Ni cast iron, specific damping capacity and tensile strength was 27% and $20kgf/mm^2$ at 3.6%C-0.2%Ni-0.3%Mo cast iron respectively.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.112-119
• /
• 2017

In this study, the availability of cow manure as raw material for solid fuel production was investigated. Since the water content of the cow manure was too high, it was dewatered using a laboratory hydraulic compressure ($11.3kg/cm^2$). The moisture content of the cow manure decreased from 82.01% to 73.36 wt.%. The dewatered cow manure was homogenized by the experimental apparatus and then put into the rotating cylindrical apparatus. From the consecutive processes, the cow ball-shaped pellet which size ranged from 3.0 to 25.0 mm was produced. The major factor for making palletized fuel from cow manure was the moisture content. Based on the experimental data, the moisture content of cow manure for pelletizing cow manure was identified as 65~75 wt.%. When the moisture content of the cow manure was lower than 30 wt.%, the diameter of the pellets maded from cow manure was smaller than 3 mm. On the other hand, when the water content of the cow manure was higher than 75 wt/%, the diameter of the processed pellets tended to be larger than 25 mm. The characteristics of the processed cow manure pellets was analyzed to be in accordance with the livestock solid fuel quality standard. The pyrolysis characteristic of the pellet was analyzed by raising the heating temperature of the experimental equipment from 200 to $900^{\circ}C$. The mass change between of 20 and $130^{\circ}C$ corresponds to the amount of moisture contained in the cow manure. The amount of moisture was about 15% of the total weight of cow manure samples. The cow manure pellet was thermally stable up to $280^{\circ}C$. It can be interpreted that combustion of cow manure pellet does not occur until the surface temperature reaches $280^{\circ}C$. The mass change of pellet between of 280 and $450^{\circ}C$ was considered to be due to the vaporization of volatile organic compounds (VOCs) present in the cow manure pellet. The maximum production of VOCs was showed near $330^{\circ}C$.