• 제목/요약/키워드: $C_2H_2,\

검색결과 29,646건 처리시간 0.063초

함침 방법의 차이에 따른 Pd, Pt-$SnO_2$의 프로판 가스 감응성 변화 (C3H8 Gas Sensitivity of Pd, Pt-$SnO_2$ Gas Sensor with Varying Impregnation Method)

  • 이종흔;박순자
    • 한국세라믹학회지
    • /
    • 제27권5호
    • /
    • pp.638-644
    • /
    • 1990
  • The C3H8 gas sensitivities of SnO2, Pd-SnO2, Pt-SnO2 gas sensor are looked over with the impregnation method of PdCl2, H2PtCl6 solution on SnO2. The Cl- ion due to incomplete decomposition of PdCl2 at 80$0^{\circ}C$ for 30 min decrease the C3H8 gas sensitivity of SnO2, and the sensitivity is increased by the impreganation of H2PtCl6 solution on SnO2 because of its lower decomposition temperature compared with PdCl2. The C3H8 gas sensitivities of Pd-SnO2, Pt-SnO2 impregnated slightly after 1st sintering are larger than that of pure SnO2 sensor because very small amount of Cl- ion exist in sample due to smaller amount of impregnaiton.

  • PDF

$H_2$ 캐리어가스가 다결정 3C-SiC 박막의 기계적 특성에 미치는 영향 (Effects $H_2$ carrier gas on the mechanical properties of poly 3C-SiC thin films)

  • 한기봉;정귀상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.89-90
    • /
    • 2007
  • This paper presents the mechanical properties of 3C-SiC thin film according to 0, 7, and 10% carrier gas $(H_2)$ concentrations using Nano Indentation. When carrier gas $(H_2)$ concentration was 10%, it has been proved that the mechanical properties, elastic modulus and hardness, of 3C-SiC are the best of them. In the case of 10% carrier gas concentration, Young's modulus and Hardness were obtained as 367 GPa and 36 GPa, respectively. When the surface roughness according to $H_2$ concentrations was investigated by AFM (atomic force microscope), when $H_2$ concentration was 10%, the roughness of 3C-SiC thin was 9.92 nm, which is also the best of them. Therefore, in order to apply poly 3C-SiC thin film to MEMS applications, $H_2$ concentration's rate should increase to obtain better mechanical properties and surface roughness.

  • PDF

Two New closo- or nido-Carborane Diphosphine Complexes: Synthesis, Characterization and Crystal Structures

  • Kong, Lingqian;Zhang, Daopeng;Su, Fangfang;Li, Dacheng;Dou, Jianmin
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권7호
    • /
    • pp.2249-2252
    • /
    • 2011
  • Two new carborane complexes containing closo- or nido-carborane diphosphine ligands with the formula: complex $[Hg(7,8-(PPh_2)_2-7,8-C_2B_9H_{10})_2]$ $CH_2Cl_2$ (1) and $[Ag_2({\mu}-Cl)_2(1,2-(P^iPr_2)_2-1,2-C_2B_{10}H_{10})_2]$ (2) have been synthesized and characterized by elemental analysis, 1H and 13C NMR spectroscopy and X-ray structure determination. The X-ray structure analyses revealed that the carborane diphosphine ligand was degraded from closo-1,2-$(PPh_2)_2-1,2-C_2B_{10}H_{10}$ to nido-[$7,8-(PPh_2)_2-7,8-C_2B_9H_{10}]^-$ in complex 1, while the closo nature of the starting ligand $1,2-(P^iPr_2)_2-1,2-C_2B_{10}H_{10}$ was retained in complex 2. In either of the two complexes, the carborane diphosphine ligand was coordinated bidentately to the Hg(II) or Ag(I) center through its two phosphorus atoms, therefore forming a five-member cheating ring between the carborane ligand and the metal center. The coordination geometry of the metal atom is distorted tetrahedron formed by $P_4$ unit in complex 1 and $P_2Cl_2$ unit in complex 2, respectively.

혼합된 Ar, N2 가스 유량에 따른 PECVD 방법에 의하여 제작된 다이아몬드 상 탄소 박막의 특성 (Characteristics of Diamond Like Carbon Film Fabricated by Plasma Enhanced Chemical Vapor Deposition Method with mixed Ar, N2 gas rate)

  • 강성호;김병진;배경태;주성후
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.87-87
    • /
    • 2018
  • 다이아몬드 상 탄소(diamond-like carbon, DLC)는 상당량의 $sp^3$ 결합을 가지는 비정질 탄소(a-C) 또는 수소화 비정질 탄소(a-C:H)로 이루어진 준안정 형태의 탄소이다. DLC는 전기 저항과 굴절률이 높고 화학적으로 다른 물질과 반응하지 않으며, 마찰계수가 낮고 경도가 높아 자기 디스크, 광학 소자 등의 다양한 분야에서 적용되고 있다[1,2]. 또한 다이아몬드에 비해 상온에서 성장이 가능할 정도로 합성온도가 낮아 적용 기판의 제한이 거의 없고, 증착 방법과 조건에 따라 탄소 결합의 다양성과 비정질성이 변화하기 때문에 넓은 범위의 특성을 얻을 수 있는 장점이 있다. 지금까지 DLC 박막의 광학적 특성, 특히 굴절률, 광학적인 에너지 밴드 갭, 자외선과 적외선 투과성에 대해서는 많은 연구가 진행되었으나 가시광선의 투과성에 대한 연구는 제한적이며[4], 가시광선 투과도 개선에 대한 연구는 전무하다. 본 연구에서는 ITO 기판 위에 DLC를 합성하고 기계적 특성과 가시광선 영역 투과도를 조사하였다. RF-PECVD(radio frequency plasma enhanced chemical vapor deposition) 방법에 의해서 $C_2H_2+Ar$ 혼합 가스 비율과 $C_2H_2+N_2$ 혼합 가스 비율을 변화시켜 ITO 기판 위에 DLC 박막을 합성하였다. 공정 압력과 rf-power, 증착시간, 기판온도는 0.2 torr, 40 W, 5 분, $50^{\circ}C$로 고정하고, 공정 가스는 $C_2H_2+Ar$$C_2H_2+N_2$가 200 sccm이 되도록 비율을 변화하였다. $C_2H_2:Ar$$C_2H_2:N_2$의 비율은 180 : 20, 160 : 40, 140 : 60, 120 : 80, 100 : 100이 되도록 가스의 유량을 조절하였다. 투과도는 가시광선(380 ~ 780 nm) 범위에서 측정하였고 두께와 표면조도는 AFM으로 측정하였다. 투과도는 $C_2H_2+Ar$의 Ar 가스 비율이 증가할수록 증가해 140 : 60일 때 최댓값을 나타낸 후 다시 감소하였다. $C_2H_2+N_2$ 투과도는 $N_2$ 가스 비율이 증가할수록 감소하는 경향을 나타내었다. 표면 거칠기는 $C_2H_2+Ar$ 혼합 가스를 사용한 경우의 Ar의 가스 비율이 증가할수록 증가하였다. 그러나 $C_2H_2+N_2$ 혼합 가스를 사용한 경우에는 $N_2$ 가스의 혼합 비율이 증가할수록 감소하였다.

  • PDF

Human Liver로부터 Cloning한 cDNA성장호르몬 수용체의 기능성 검토 (Assembly of a Functional cDNA for Human Liver Growth Hormone Receptor: Cloning of Assembled hGHR cDNA)

  • 장규태;지선병홍;손동수;서원진삼;고교적웅
    • 한국수정란이식학회지
    • /
    • 제13권2호
    • /
    • pp.159-172
    • /
    • 1998
  • 사람 성장호르몬 수용체(hGHR) cDNA는 PCR방법에 의하여 fagment로서 보고되어진 바 있으나, liver cDNA로 부터 전장을 cloning한 보고는 없는 실정으로 본 연구에서는 기능을 가진 약 4.6kbp의 cDNA hGHR을 cloning 하는데 성공하였다. 먼저 cloning하기 위하여 human liver mRNA와 human breast cancer tissue로부터 회수한 mRNA를 RT-PCR방법에 의하여 human cDNA library와 cloning에 필요한 probe를 제작하였다. human library mRNA는 GT-PCR방법에 의하여 증폭하여 증폭되어진 산물은 λZAP Vector를 이용하여 cDNA library를 구축하였고,screeing을 위하여 임 보고 되어진 hGHR fragment native sequence를 기초로 N-terminal부분의 primer를 설계하여 950bp의 probe를 얻는데 성공하였다. 이 probe를 이용하여 준비된 human liver cDNA library로부터 2.5$\times$10 6개의 plaque로부터 6개의 positive clone을 획득하였고, 이들중 poly Asignal인 "AATAAA"를 포함하고 있는 가장 긴 약 3.8kbp의 clone을 sequencing한 결과 open reading frame을 포함하고 있었으나, 5'부분의 결손되어 있었다. 그리하여 이 부분은 human breast cancer tissue로 부터 회수한 mRNA를 RT-PCR에 의하여 증폭하였고, sequencing결과 이미 보고되어진 native hGHR와 비교한 결과 하나의 nucleotide가 silent mutation으로 판명되었다.한편 human liver cDNA library로부터 cloning한 3.8cp의 positive clone의 5'end의 결손된 부분에 silent mutation된 PCR 산물을 연결함으로써 native hGHR와 유사한 cDNA hGHR subcloning에 성공하였다. 이러한 cDNA hGHR의 clone이 function을 가지고 있는지를 검토하기 위하여 eukaryotic 발현 vector인 pCXN2에 의거 ligation한 후 chinese hamster ovary cell[CHO-KI]에 transfect를 실시하였다. Dexamethasone은 첨가하지 않고 hGH만의 존재하에서 이들 cell을 배양시키고 cell menbrane에서 발현 여부를 판정키 위하여 hGHR monocloual antibody를 사용하여 flow cytometery해석을 실시하는 한편 125I-hGH binding assay에 의하여 hGH binding activity를 측정하였다. 최종적으로 GH signal transduction의 target genedf으로 알려져 있는 serine protease inhibitor 2.1(Spi 2.1) gene의 promotor activity를 검토한 결과 hGHR을 transfect한 CHO Cell에 있어서 hGH의 농도에 의존적으로 증가되었다. 따라서 본 실험에서 cloning한 cDNA hGHR는 native hGHR와 같은 기능을 가지는 것으로 판명되었다.것으로 판명되었다.

  • PDF

(C10H8N2H)2Cr2O7를 이용한 치환 벤질 알코올류의 산화반응과 반응속도에 관한 연구 (A Study for Kinetics and Oxidation Reaction of Substituted Benzyl Alcohols Using (C10H8N2H)2Cr2O7)

  • 박영조;김영식;김수종
    • 공업화학
    • /
    • 제28권5호
    • /
    • pp.597-600
    • /
    • 2017
  • 4,4'-비피리딘과 크롬(VI) 산화물을 반응시켜 $(C_{10}H_8N_2H)_2Cr_2O_7$을 합성하였다. 적외선분광광도법(FT-IR)과 원소분석으로 구조를 확인하였다. 여러 가지 용매 하에서 $(C_{10}H_8N_2H)_2Cr_2O_7$을 이용하여 벤질알코올의 산화반응을 측정한 결과, 용매의 유전상수 값이 증가함에 따라 반응수율이 증가했다. 그 순서는 DMF (N,N'-디메틸포름아미드) > 아세톤 > 클로로포름 > 시클로헥센이었다. $H_2SO_4$ 촉매를 이용한 DMF 용매 하에서, $(C_{10}-H_8N_2H)_2Cr_2O_7$은 벤질알코올(H)과 그의 유도체들($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, $m-NO_2$)을 효과적으로 산화시켰다. 전자받개 그룹들은 반응속도가 감소한 반면에 전자주개 치환체들은 반응속도를 증가시켰고, Hammett 반응상수(${\rho}$) 값은 -0.70 (308 K)이었다. 본 실험에서 알코올의 산화반응 과정은 속도결정단계에서 수소화 전이가 일어났다.

다공성 Cr2O3 나노육각기둥을 이용한 C2H5OH 센서 (C2H5OH Sensor Using Porous Cr2O3 Nano-Hexaprisms)

  • 정현묵;이종흔
    • 센서학회지
    • /
    • 제21권6호
    • /
    • pp.451-455
    • /
    • 2012
  • Dense Cr-precursor nano-hexaprisms were prepared by heating the Cr-nitrate aqueous solution containing Hexamethylenetetramine and polyvinylpyrrolidone, which were converted into porous $Cr_2O_3$ nano-hexaprisms containing nanoparticles by heat treatment of Cr-precursors at $600^{\circ}C$ for 2 h in air atmosphere. At the sensor temperature of $300^{\circ}C$, porous $Cr_2O_3$ nano-hexaprism showed the high response ($R_g/R_a$, $R_g$: resistance in gas, $R_a$: resistance in air) to 100 ppm $C_2H_5OH$ ($R_g/R_a=69.8$) with negligible cross-responses to 100 ppm CO and 5 ppm $C_6H_6$. The sensitive and selective detection of $C_2H_5OH$ in porous $Cr_2O_3$ nano-hexaprism were discussed in relation to the morphology of nanostructures.

Ag가 도핑된 계층적 ZnO 나노구조 기반 C2H2 가스센서의 제작과 그 특성 (Fabrication of C2H2 Gas Sensors Based on Ag-Doped Hierarchical ZnO Nanostructures and Their Characteristics)

  • 이관우;정귀상
    • 센서학회지
    • /
    • 제23권6호
    • /
    • pp.397-401
    • /
    • 2014
  • This paper describes the fabrication and characteristics of $C_2H_2$ gas sensor based on Ag-doped hierarchical ZnO nanostructures. In this work, a pure hierarchical ZnO structure was prepared using a simple hydrothermal method, and Ag nanoparticles doped the hierarchical ZnO structure were uniformly synthesized through photochemical route. The synthesized samples were characterized by SEM, TEM, EDS, XRD and PL spectra. Average size of prepared ZnO structures was around $2{\sim}3{\mu}m$ and showed highly uniform. The average size of Ag nanoparticles was 70 nm. The gas sensing properties of as-prepared products were investigated using resistivity-type gas sensors. 5 at% Ag-doped ZnO based sensors exhibited good performances for $C_2H_2$ gas in comparison with the un-doped one. The sensor based on Ag-doped hierarchical ZnO structures had linear response property from 5~1000 ppm of $C_2H_2$ concentration at working temperature of $200^{\circ}C$. The response values with 100 ppm $C_2H_2$ at $200^{\circ}C$ were 10% and 75% for pure and 5 at% Ag-doped hierarchical ZnO nanostructures, respectively. Moreover, the device showed excellent selectivity towards to $C_2H_2$ gas at optimal working temperature of $200^{\circ}C$.

An Efficient Method to Compute Partial Atomic Charges of Large Molecules Using Reassociation of Fragments

  • Lee, Jung-Goo;Jeong, Ho-Young;Lee, Ho-Sull
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권3호
    • /
    • pp.369-376
    • /
    • 2003
  • Coulson (ZINDO), Mulliken $(MP2/6-31G^*)$ and Natural $(MP2/6-31G^*)$ population analyses of several large molecules were performed by the Fragment Reassociation (FR) method. The agreement between the conventional ZINDO (or conventional MP2) and FR-ZINDO (or FR-MP2) charges of these molecules was excellent. The standard deviations of the FR-ZINDO net atomic charges from the conventional ZINDO net atomic charges were 0.0008 for $C_{10}H_{22}$ (32 atoms), 0.0012 for $NH_2-C_{16}O_2H_{28}-COOH$ (53 atoms), 0.0014 for $NH_3^+-C_{16}O_2H_{28}-COOH$ (54 atoms), 0.0017 for $NH_2-C_{16}O_2H_{28}-COO^-$ (52 atoms), 0.0019 for $NH_3^+-C_{16}O_2H_{28}-COO^-$ (53 atoms), 0.0024 for a conjugated model $(O=CH-(CH=CH)_{15}-C=O-(CH=CH)_{12}-CH=CH_2)$, 118 atoms), 0.0038 for aglycoristocetin $(C_{60}N_7O_{19}H_{52}^+$, 138 atoms), 0.0023 for a polypropylene model complexed with a zirconocene catalyst $(C_{68}H-{121}Zr^+$, 190 atoms) and 0.0013 for magainin $(C_{112}N_{29}O_{28}SH_{177}$, 347 atoms), respectively. The standard deviations of the FR-MP2 Mulliken (or Natural) partial atomic charges from the conventional ones were 0.0016 (or 0.0016) for $C_{10}H_{22}$, 0.0019 (or 0.0018) for $NH_2-C_{16}O_2H_{28}-COOH$ and 0.0033 (or 0.0023) for $NH_3^+-C_{16}O_2H_{28}-COO^-$, respectively. These errors were attributed to the shape of molecules, the choice of fragments and the degree of ionic characters of molecules as well as the choice of methods. The CPU time of aglycoristocetin, conjugated model, polypropylene model complexed with zirconocene and magainin computed by the FR-ZINDO method was respectively 2, 4, 6 and 21 times faster than that by the normal ZINDO method. The CPU time of $NH_2-C_{16}O_2H_{28}-COOH\;and\;NH_3^+-C_{16}O_2H_{28}-COO^-$ computed by the FR-MP2 method was, respectively, 6 and 20 times faster than that by the normal MP2 method. The largest molecule calculated by the FR-ZINDO method was B-DNA (766 atoms). These results will enable us to compute atomic charges of huge molecules near future.

Clostridium butyricum [절대혐기발효세균]과 Thiocapsa roseopersicina [홍색유황세균]의 수소생산 효소 특성 비교 (Comparison of hydrogenases prepared from Clostridium butyricum and Thiocapsa roseopersicina)

  • 백진숙;윤영수;김미선
    • 한국수소및신에너지학회논문집
    • /
    • 제16권3호
    • /
    • pp.219-228
    • /
    • 2005
  • Fermentative strict anaerobic bacterium, Clostricium butyricum NCIB 9576 (Cl. butyricum) and purple sulfur phototrophic bacterium, Thiocapsa roseopersicina NCIB 8347 (T. roseopersicina) were compared on their temperature and oxygen stabilities of cytoplasmic hydrogenases. Cell growth phase and the specific activities of evolution $H_2ase$ were related for both strains, exhibiting the highest cytoplasmic $H_2ase$ activities during the logarithmic growth phases which were 4 and 18 hrs after the incubation for Cl. butyricum and T. roseopersicina, respectively. The optimum temperatures for the growth of Cl. butyricum and T. roseopersicina were 37$^{\circ}C$ and 27$^{\circ}C$, respectively, while those for $H_2$ evolution of cytoplsmic hydrogenases prepared from Cl. butyricum ($C-H_2ase$) and T. roseopersicina ($T-H_2ase$) were 45$^{\circ}C$ and 65$^{\circ}C$, respectively. $T-H_2ase$ was more thermo-stable than $C-H_2ase$. $T-H_2ase$ retained its full activity for 5 hrs at 50$^{\circ}C$ and retained 90% of its original activity for 5 hrs at 60$^{\circ}C$, however, $C-H_2ase$ lost its activity drastically at 50$^{\circ}C$. The optimum pHs for $H_2$ oxidation of $C-H_2ase$ and $T-H_2ase$ were 9.0 and 7.5 respectively. The both enzymes showed maximum $H_2$ evolution activity at pH 7.0. Under the aerobic condition, 80% of $T-H_2ase$ activity was retained for 10 hrs at 30$^{\circ}C$, and 50% of activity was still remained after 6 days at the same experimental conditions. But the $C-H_2ase$ was labile to oxygen and lost its activity immediately after the exposure to air.