• Korean Journal of Crystallography
• /
• v.9 no.1
• /
• pp.6-10
• /
• 1998

The complex[Cu(L)](ClO4)2 (1) (L:3,5,10,12-Tetramethyl-1,4,8,11-tetraazacyclotetradecane) has been synthesized and structurally characterized. The complex 1 crystallizes in the monoclinic system, space group P21/n with cell parameters a=8.208(2)Å, b=13.339(6) Å, c=10.752(5) Å, β=111.02(4)˚ Z=2. Least-squares refinement of 1 led to a R(RW)factor of 0.073 (0.142) for 617 observed reflections of F0>40(F0). The crystal structure of 1 has a square-planar geometry and adopts the trans-III conformation.

• Journal of the Korean Ceramic Society
• /
• v.30 no.2
• /
• pp.148-156
• /
• 1993

TiN films were deposited onto high speed steel (SKH9) by plasma assisted chemical vapor deposition (PACVD) using a TiCl4/N2/H2/Ar gas mixture at around 50$0^{\circ}C$. The effects of the deposition temperature, R.F. power and TiCl4 concentration on the deposition of TiN and the microhardness of TiN film were investigated. The crystallinity and the microhardness of TiN films were improved with increase of the deposition temperature. Optimum deposition temperature in this study was 50$0^{\circ}C$, because a softening or phase transformation of the substrate occurred over 50$0^{\circ}C$. A large increase of the film growth rate with a strong(200) preferred orientation was obtained by increasing R.F. power. Much chlorine content of about 10at.% was found in the deposited films and resulted in relatively low average microhardness of about 1, 500Kgf/$\textrm{mm}^2$ compared with the theoretical value(~2, 000Kgf/$\textrm{mm}^2$).

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.552-558
• /
• 2000

LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.614-621
• /
• 1998

An extracellular inulinase from Penicillium sp. which isolated from soil sample was purified to a single protein th-rough ammonium sulfate fractionation, DEAE-Sephacel ion exchange chromatography and Toyopearl HW 65 F gel filtration. The temperature and pH for the enzyme reaction were around 6$0^{\circ}C$ and 4.0, respectively. The enzyme was stable at 3$0^{\circ}C$-5$0^{\circ}C$ and in the pH range of 4 to 5. $CuCl_2$, $HgCl_2$ and EDTA inhibited the enzyme activity strongly. By contrast, $MnCl_2$ and $CaCl_2$ activated the enzyme activity. The molecular weight of the purified enzyme was esti-mated to be 77,000 dalton by SDS-polyacrylamide gel electrophoresis. The Km values of the enzyme for inulin were calculated to be $2.2\times10^{-3}$M. TLC analysis suggested that purified enzyme is exo-type inulinase. The NH2-terminal amino acid sequences of the purified enzyme was determined to be $NH_2$-X-Glu-Ser-Tyr-Thr-Glu-Lys/Leu-Tyr-Arg-Pro.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.309-316
• /
• 1990

The sequence of a 1795 bp restriction fragment containing the B. circulans F-2 gene for NaC1- dependent $\alpha$-amylase (CI-amylase) is reported. The probable coding region of the gene is 1005 base pairs (335 amino acida) long. The NaC1-dependent $\alpha$-amylase (el-amy) sequence shows an open reading frame (ORF) with the translated molecular weight of about 38, 006, which correspond to a molecular weight of about 35, 000 (Mi). The gene is preceded by the sequence resembling promoter for the vegetative B, subtitis RNA polymerases. These are followed by the sequences resembling a B. subtilis ribosome binding site 5 nucleotides before the first codon of the gene. Homologous regions with other amylases were found. The N-terminal sequences of the mature proteins expressed in E. eoli were identical to the N-terminal sequences which are anaIysed.

• Korean Journal of Microbiology
• /
• v.31 no.4
• /
• pp.318-325
• /
• 1993

The optima] conditions for the formation, the regeneration. and the spheroplast fusion of Flavimonas aryz/habitans spheroplasts were investigated. Cells were transformed to spherop]asts effectively by treatment of 0.5% volume (v/v) of 0.] M EDTA and ]00 flg/ml lysozyme at $37^{\circ}C$ for 30 min without shaking. Magnesium chloride and calcium chloride were effective on the stabilization of spheroplasts. and 20 mM calcium chloride in the rich regeneration medium improve the yield of regenerants as much as 3.5-fo]d. Addition of 0.8% bovine serium albumine (BSA) in dilution buffer for spheroplast formation improved the stabilization of spheroplasts over extended periods (4-6 hr) at room temperature. and thus increased the yield of recombinants to 4.5-fold. The spheroplast formation frequency and regeneration frequency of F aryzihabitans strain was 90.10% and 3.800/." respectively. The first regenerated cell of F. aryzihabitans spheroplasts were appeared 6 hours after plating. By I I hours after plating, 80% of spheroplasts were regenerated on thc rich regeneration medium containing 0.5 M sucrose. The intraspeci11c spheroplast fusion of F urvz/habitans was carried out and the properties of obtained fusants were investigated. Formation of fusion products was effective when the Flav/munas spheroplast mixture was treated with 40%(w/v) PEG6000 and 20 mM CaCl, for 10 min at room temperature. and thc formation of frequency of recombinants were $2.0{\times}10^{-5}~3.6{\times}10^{-5}$. All tested recombinant clones were very stable on further propagation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.775-782
• /
• 2014

The importance of including spin-orbit interactions for the correct description of structures and vibrational frequencies of haloiodomethanes is demonstrated by density functional theory calculations with spin-orbit relativistic effective core potentials (SO-DFT). The vibrational frequencies and the molecular geometries obtained by SO-DFT calculations do not match with the experimental results as well as for other cations without significant relativistic effects. In this sense, the present data can be considered as a guideline in the development of the relativistic quantum chemical methods. The influence of spin-orbit effects on the bending frequency of the cation could well be recognized by comparing the experimental and calculated results for $CH_2BrI$ and $CH_2ClI$ cations. Spin-orbit effects on the geometries and vibrational frequencies of $CH_2XI$ (X=F, Cl, Br, and I) neutral are negligible except that C-I bond lengths of haloiodomethane neutral is slightly increased by the inclusion of spin-orbit effects. The $^2A^{\prime}$ and $^2A^{{\prime}{\prime}}$ states were found in the cations of haloiodomethanes and mix due to the spin-orbit interactions and generate two $^2E_{1/2}$ fine-structure states. The geometries of $CH_2XI^+$ (X=F and Cl) from SO-DFT calculations are roughly in the middle of two cation geometries from DFT calculations since two cation states of $CH_2XI$ (X=F and Cl) from DFT calculations are energetically close enough to mix two cation states. The geometries of $CH_2XI^+$ (X=Br and I) from SO-DFT calculations are close to that of the most stable cation from DFT calculations since two cation states of $CH_2XI$(X=Br and I) from DFT calculations are energetically well separated near the fine-structure state minimum.

• Solar Energy
• /
• v.17 no.1
• /
• pp.3-15
• /
• 1997

The goal of this paper is to measure and compare the performance of solar heat pump for school classroom heating. To accomplish the goal, solar heat pump with alumium roll bond type evaporator and indoor heat exchanger(condenser) was built and fully instrumented with thermocouples and pressure transducers etc. The test results showed that the COP and capacity of R-134a($CF_3CH_2F$) were higher than those of R-12($CF_2Cl_2$). The solar heat pump system for room heating was designed to show the best efficiency that the room temperature make $18{\sim}20^{\circ}C\;and\;23{\sim}25^{\circ}C$ in Seoul during November, December, and January.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.4
• /
• pp.185-189
• /
• 2012

A.c. impedances of mechanically polished CP-Ti specimens were measured at open-circuit potential (OCP) with immersion time and under applied anodic potentials between -0.2 and 1 $V_{Ag/AgCl}$ in 0.1 M NaOH solution. Capacitances of native oxide films ($C_{ox,na}$) grown naturally and capacitances of anodic oxide films ($C_{ox,an}$) formed under applied anodic potentials were obtained to examine the growth of native and anodic oxide films in 0.1 M NaOH solution and how to use $C_{ox,na}$ for the surface area measurement of Ti specimen. $1/C_{ox,na}$ and $1/C_{ox,an}$ appeared to be linearly proportional to OCP and applied potential ($E_{app}$), with proportional constants of 0.086 and 0.051 $uF^{-1}\;V^{-1}$, respectively. The $C_{ox,na}$ also appeared to be linearly proportional to geometric surface area of the mechanically polished CP-Ti fixture specimen, with proportional constants of 11.3 and $8.5{\mu}F\;cm^{-2}$ at -0.45 $V_{Ag/AgCl}$ and -0.25 $V_{Ag/AgCl}$ of OCPs, respectively, in 0.1 M NaOH solution. This linear relationship between $C_{ox,na}$ and surface area is suggested to be applicable for the measurement of real surface area of Ti specimen.

• Journal of Food Hygiene and Safety
• /
• v.15 no.2
• /
• pp.176-178
• /
• 2000

V parahaemolyticus possessed an extracellular alkaline pretense activity during the stationary growth phase. Various factors such as nitrogen sources, the concentration of NaCl and metal ions were investigated for optimizing the production of alkaline pretense from V. parahaemolyticus ATCC 17802. Among the nitrogen sources tested skim milk showed the distinct increase of the activity and the activity was the highest at 2% in final concentration after 60 hours incubation. The addition of NaCl and metal ions did not increase the alkaline pretense activity. CoC$_2$, CuC1$_2$, and HgCl rather highly inhibited alkaline protease production.