• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.162-168
• /
• 2002

Hybrid Welding means the coupling of the energy of two different energy sources in a common process zone. This paper describes prospects in laser-arc-hybrid-welding. Different kinds of lasers ($CO_2$ laser and Nd:YAG laser) and arc processes (TIG, Plasma and GMA) are considered.

• Medical Lasers
• /
• v.10 no.2
• /
• pp.111-114
• /
• 2021

A 38-year-old man visited the hospital for a voice change that began two months previously. There were no other accompanying symptoms; the patient had a history of 20 years of smoking. Carbon dioxide (CO₂) laser cordectomy was performed on the left side of the vocal cord, and the biopsy results showed squamous cell carcinoma. Radiation therapy was not performed, and CO₂ laser cordectomy was performed again because of a recurrence of left vocal cord mass three years after a progress observation.

• Medical Lasers
• /
• v.8 no.2
• /
• pp.84-86
• /
• 2019

Pyriform sinus cyst is a rare disease. This disease can be found by chance or appear as lymph nodes with cancer, infections, shortness of breath, or airway compromise, and can be an unusual cause of dysphonia. This paper presents a case of a pyriform sinus cyst in the pharyngeal wall of the left pyriform sinus, which presented as neck discomfort in a 63-year-old female. The plan was to remove this cyst with a transoral CO₂ laser because a CO₂ laser is a useful tool for removing cysts without bleeding and consuming time. The excision was performed successfully. Transoral laser pyriform sinus cyst excision is a simple, safe, and effective method for the treatment of pyriform sinus cysts. This procedure is likely to be used as a selective treatment when managing this condition.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.2
• /
• pp.113-121
• /
• 2023

High-precision lasers and anti-aircraft radars are the main equipment to protect the Korean Peninsula, and require preemptive maintenance before signs of failure. Of the key components in the drive sector, bearings do not have a fault alarm function. Therefore, the technology for diagnosing defects in bearings before the performance degradation of equipment occurs is becoming more important. In this paper, for the experimental analysis, we measured the acceleration of the four sets of the same lot using acceleration sensors. Through periodic measurements, the factors that changed until the bearing stopped rotating were analyzed. To determine the replacement time, the main factors and threshold values of the bearing signal were analyzed. The error of the theoretical and experimental analysis results of the defect frequency was within 2.8 %, and the validity of the theoretical analysis results could be confirmed. Based on the results, it is possible to remotely transmit trouble alerts to users through the system check function.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.304-308
• /
• 2002

We demonstrate a simple pulsed $CO_2$ laser with millisecond long pulse duration in a tube at a low pressure of less than 30 Torr. The novel power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply doesn't need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. To control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of SCR(Silicon Controlled Rectifier) gate is varied from 30。 to 150。. A ZCS (Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control precisely the gate signal of the SCR. The maximum laser output of 35 W is obtained at a total pressure of 18 Torr, a pulse repetition rate of 60 Hz, and a SCR gate firing angle of 90。 . In addition, the resulting laser pulse width is approximately 3㎳(FWHM). This is a relatively long pulse width, compared with other repetitively pulsed $CO_2$ lasers.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.41.3-41.3
• /
• 2019

Ices in interstellar environments are well traced mostly by their absorption features in the near- to mid-infrared spectrum. The infrared camera (IRC) aboard AKARI provides us the near-infrared spectroscopic data which cover $2.5-5.0{\mu}m$ with a spectral resolution of R ~ 120. Our AKARI spectroscopic survey of young stellar objects (YSOs), including low-luminosity protostars and background stars, revealed the absorption features of $H_2O$, $CO_2$, CO, and XCN ice components. We present near-infrared spectra of the observed targets and compare their ice abundances with those previously derived from various YSOs and the background stars behind dense molecular clouds and cores. In addition, we suggest possible science cases for SPHEREx, NASA's new near-infrared space observatory, based on the results from our AKARI IRC spectroscopic study.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1816-1819
• /
• 2002

Nowadays, CO2 lasers are used widely in many applications such as materials fabrication, communications, remote sensing and military purpose etc. It is important to control the laser output power in those fields. In this paper, current resonant half-bridge inverter and Cockcraft-Walton circuit are used to vary the laser output power. This laser power supply is designed and fabricated which has less switching losses and compact size. Also we used an IGBT(Insulated Gate Bipolar Transistor) as a switching device of a power supply and PIC one-chip microprocessor are used to control the gate signal of the IGBT precisely. We investigated the output characteristics of this CO2 laser. As a result, the maximum laser output power of 26[W] is obtained at the resonant frequency of about 13[kHz].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.176-179
• /
• 2002

Nowadays, CO2 lasers are used widely in many applications such as materials fabrication. communications, remote sensing and military purpose etc. It is important to control the laser output power in those fields. In this paper, current resonant half-bridge inverter and Cockcraft-Walton circuit are used to vary the laser output power. This laser power supply is designed and fabricated which has less switching losses and compact size. Also we used an IGBT(insulated Gate Bipolar Transistor) as a switching device of a power supply and PIC one-chip microprocessor are used to control the gate signal of the IGBT precisely. We investigated the output characteristics of this CO2 laser. As a result. the maximum laser output power of 26 [W] is obtained at the resonant frequency of about 13 [kHz].

• Design & Manufacturing
• /
• v.15 no.4
• /
• pp.65-71
• /
• 2021

In the early days of laser invention, it was simply used as a measuring tool, but as lasers became more common, they became an indispensable processing tool in the industry. Short-wavelength lasers are used to make patterns on wafers used in semiconductors depending on the wavelength, such as CO2 laser, YAG laser, green laser, and UV laser. At first, the hole of the PCB board mainly used for electronic parts was not thin and the hole size was large, so a mechanical drill was used. However, in order to realize product miniaturization and high integration, small hole processing lasers have become essential, and pattern exposure for small hole sizes has become essential. This paper intends to analyze the characteristics through patterns by exposing the PCB substrate through DMD and polygon scanner, which are different optical systems. Since the optical systems are different, the size of the patterns was made the same, and exposure was performed under the optimal conditions for each system. Pattern characteristics were analyzed through a 3D profiler. As a result of the analysis, there was no significant difference in line width between the two systems. However, it was confirmed that dmd had better pattern precision and polygon scanner had better productivity.

• Archives of Plastic Surgery
• /
• v.41 no.1
• /
• pp.85-88
• /
• 2014

To improve the cosmetic results of removing epidermal cysts, minimally invasive methods have been proposed. We proposed a new minimally invasive method that completely removes a cyst through a small hole made by a $CO_2$ laser. Twenty-five patients with epidermal cysts, which were 0.5 to 1.5 cm in diameter, non-inflamed, and freely movable, were treated. All of the patients were satisfied with the cosmetic results. This method is simple and results in minimal scarring and low recurrence rates without complications.