• Journal of the Korean Society of Radiology
• /
• v.5 no.2
• /
• pp.93-96
• /
• 2011

Currently, the development of direct conversion radiation detector using photoconductor materials is progressing in widely. Among of theses photoconductor materials, mercuric iodide compound than amorphous selenium has excellent absorption and sensitivity of high energy radiation. Also, the detection efficiency of signal generated in photoconductor film varies by electric filed and geometric distribution according to top-bottom electrode size. Therefore, in this work, the x-ray detection characteristics are investigated about the size of top electrode in $HgI_2$ photoconductor film. For sample fabrication, to solve the problem that is difficult to make a large area film, we used the spatial paste screen-print method. And the sample thickness is $150{\mu}m$ and an film area size is $3cm{\times}3cm$ on ITO-coated glass substrate. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a magnetron sputtering system and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$. From experimental measurement, the dark current, sensitivity and SNR of the $HgI_2$ film are obtained from I-V test. From the experimental results, it shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high dark current. Therefore, the optimized size of electrode is importance for the development of photoconductor based x-ray imaging detector.

• Journal of the Korean Society of Radiology
• /
• v.6 no.1
• /
• pp.73-77
• /
• 2012

Recently, Interest to the photoconductor, which is used to flat form X-ray detector such as a-Se, $HgI_2$, PbO, CdTe, $PbI_2$ etc. is increasing. In this study, the film layer by using the photoconductive material with particle sedimentation was fabricated and evaluated. The quantization efficiency of the continuous X-ray with the 70 kVp energy bandwidth was analyzed by using the Monte Carlo simulation. With the results, the thickness of film with 64 % quantization efficiency was 180 ${\mu}m$ which is similar to the efficiency of 500 ${\mu}m$ a-Se film. And $HIg_2$ film has the high quantization efficiency of 74 % on 240 ${\mu}m$ thickness. The electrical characteristics of the 239 ${\mu}m$ $Hgl_2$ films produced by particle sedimentation were shown as very low dark current(under 10 $pA/mm^2$), and high sensitivity(19.8 mC/mR-sec) with 1 $V/{\mu}m$ input voltage. The SNR, which is influence to the contrast of X-ray image, was shown highly as 3,125 in low driving voltage on 0.8 $V/{\mu}m$. With the results of this study, the development of the low-cost, high-performance image detector with film could be possible by replacing the film produced by particle sedimentation instead to a-Se detector.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.409-418
• /
• 2011

This study was conducted to investigate the effects of dietary probiotics and immunomodulator on growth performance, carcass characteristics, fecal $NH_3$ content and pathogenic bacteria counts in ileum and cecum and ileum of broiler chicken (Korean native chicken, HanHyup No. 3). A total of 120 (day-old) chicks were randomly divided into 5 treatments with 3 replicates and there were 8 birds per replicate. Dietary treatments consisted of five diets; the corn-soybean based control diet (C), the diet containing antibiotics (Avilamycin) 10 ppm (T1), the diet containing probiotics 1 [(Lactobacillus ($4.45{\times}10^6$) + yeast ($1.51{\times}10^6$) + Bacillus subtilis ($3.50{\times}10^5$)] at 0.5% level (T2), probiotics 2 [(Lactobacillus ($6.70{\times}10^7$) + yeast ($3.10{\times}10^6$)] at 0.5% level in diet (T3), and the diet containing probiotics 3 [T2 + ${\beta}$-glucan + organic acid] (T4) and raised for 9 weeks. There were no significant differences among treatments in weight gain, feed intake and feed conversion. Carcass ratios of broilers were higher in T3 and T4 than other treatments, however, the differences were non-significant. Internal organs and liver, heart weight were significantly increased in T4 (p<0.05) compared to other treatments. The fecal $NH_3$ gas content was decreased (p<0.05) in antibiotics fed group than others. However, probiotic fed groups were not different when compared with control. The number of Salmonella and E. coli in cecum were reduced in the group supplemented with probiotics and immunomodulator compared to the antibiotics (p<0.05). In this experiment, we showed that diets containing pro-biotics and immunomodulator were capable of an alternative to antibiotics.

• Korean Journal of Poultry Science
• /
• v.48 no.3
• /
• pp.101-110
• /
• 2021

In this study, we performed a cross-combination test using offspring from two paternal and five maternal parent stock lines to produce a new synthetic breed of Korean native commercial chickens. The survival rate, body weight, feed intake, and feed efficiency were measured for 10 crosses, with 837 Hanhyup-3 chickens used as a control. Most chickens had brown-based feathers, and there was little difference in color phenotypes among combinations. The average survival rate of the combinations was 94.9%, which was significantly different from that of Hanhyup-3 at 75.3% (P<0.01). There was significant differences in body weight among the combinations at all weeks of age (P<0.01). At 10 weeks of age, the FHHY combination was the heaviest with 2,300 g, while the weight of Hanhyup-3 was 1,922 g. In addition, the weight difference between the male and female chickens was 458 g. As a result of regression analysis, the duration needed to reach 1.9 kg was about 61 days for the FHFY, FHHY, and HFFY combinations, and 70 days for Hanhyup-3, exhibiting a 9-day difference. The average feed conversion ratio of the combinations until 10 weeks was 2.42, which was significantly different from that of Hanhyup-3 at 2.97 (P<0.01). In conclusion, FHHY, FHFY, and HFFY were determined to be the best new breed combinations based on production capacity. When these combinations are used as new commercial breeds, they are expected to increase the average weight by 18% and improve feed efficiency by 19%, as compared to the existing Hanhyup-3 breed.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.350-356
• /
• 2014

This study was conducted to evaluate the feeding value of the spent mushroom (Hypsizygus marmoreus) substrates (SMS) in laying hens (Hy-Line Brown). The fresh spent mushroom (Hypsizygus marmoreus) substrates collected from the Namkyung farm were fermented with Bacillus subtilis EJ3 for 2 weeks. A total of twenty-four laying hens were fed corn-soy based experimental diets containing 0% (T0), 5% (T1), 10% (T2) and 15%(T3) fermented SMS for 12 weeks. There were no significant differences among the treatments in egg production, egg weight, egg mass, feed conversion and viability during the experimental period. Feed intake was significantly lowered in T0 (118.3 g) than T1 (121.9 g), T2 (120.3 g) and T3 (122.4 g). There were no significant differences among the treatments eggshell breaking strength, thickness and haugh unit, whereas the yolk color of T1, T2 and T3 were significantly heavy than T0. The palatability of boiled meat was significantly better in the T3 laying hens than in the T0 laying hens. In conclusion, fermented SMS can be used as resource of feed in laying hen feed at 5.0-15% level without effect on performance and egg qualify.

• Korean Journal of Poultry Science
• /
• v.50 no.2
• /
• pp.91-99
• /
• 2023

This study aimed to develop a high-productivity breed of Korean native Samgye chicken. We evaluated the production performance of six Korean native chicken combinations (KNC-SCYC, SCYD, SDYC, SDYD, SYYC, SYYD) and GSP-Hanhyup Korean native chickens, with Baeksemi chickens used as a control group. The performance test was conducted from hatching to 7 weeks of age on 756 chickens, and we measured survival rate, body weight, shank length, feed utility, and carcass yield. The overall survival rate was nearly 100% for all strains. However, body weight showed significant differences between strains at all ages (P<0.01), with Baeksemi weighing 863.8±76.9 g, GSP-Hanhyup weighing 804.7±72.5 g, and KNC-combinations weighing 543.0±61.8 g at 5 weeks of age. The duration needed to reach 850 g was estimated to be 34.5 days for Baeksemi, 37.5 days for GSP-Hanhyup, and 45.8-48.8 days for KNC-combinations. Carcass yield percentage was highest for KNC-SYYD combination at 63.3%, followed by Baeksemi at 60.4%, and GSP-Hanhyup at 56.1%. Shank length at 850 g body weight was 7.6 cm for KNC-SYYD combination, 7.8 cm for Baeksemi, and 8.0 cm for GSP-Hanhyup. The feed conversion ratio at 850 g body weight was 1.81 for Baeksemi, 2.17 for GSP-Hanhyup, and 2.27 for KNC-SCYC combination. Our results suggest that the KNC-SYYD combination and GSP-Hanhyup breed have the potential to be used in Samgye production due to their moderate growth performance, higher carcass yield, and shorter shank length, despite their lower growth productivity and feed efficiency when compared to Baeksemi.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.39-52
• /
• 2007

Quantitative analysis on release behavior of the $^{85}Kr\;and\;^{14}C$ fission gases from the spent fuel material during the voloxidation and OREOX process has been performed. This thermal treatment step in a remote fabrication process to fabricate the dry-processed fuel from spent fuel has been used to obtain a fine powder The fractional release percent of fission gases from spent fuel materials with burn-up ranges from 27,000 MWd/tU to 65,000 MWd/tU have been evaluated by comparing the measured data with these initial inventories calculated by ORIGEN code. The release characteristics of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation process at $500^{\circ}C$ seem to be closely linked to the degree of conversion efficiency of $UO_2\;to\;U_3O_8$ powder, and it is thus interpreted that the release from grain-boundary would be dominated during this step. The high release fraction of the fission gas from an oxidized powder during the OREOX process would be due to increase both in the gas diffusion at a temperature of $500^{\circ}C$ in a reduction step and in U atom mobility by the reduction. Therefore, it is believed that the fission gases release inventories in the OREOX step come from the inter-grain and inter-grain on $UO_2$ matrix. It is shown that the release fraction of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation step would be increased as fuel burn-up increases, ranging from 6 to 12%, and a residual fission gas would completely be removed during the OREOX step. It seems that more effective treatment conditions for a removal of volatile fission gas are of powder formation by the oxidation in advance than the reduction of spent fuel at the higher temperature.

• Korean Journal of Veterinary Research
• /
• v.33 no.4
• /
• pp.657-664
• /
• 1993

To reveal the immunogenicity of ${\gamma}-irradiated$ E tenella and its progeny, a series of experiments on the effects of Cobalt-to ${\gamma}-irradiation$ was performed. The SPF chickens inoculated with diffenrt doses of inoculum were challenged with $1{\times}10^5$ oocysts of virulent E tenella. The levels of 100 Gy ${\gamma}-irradiation$ from $^{60}Co$ and of inoculum with $1{\times}10^4$ oocysts were recognized as proper as immunogen by comparison of survival rates, body weight gains, blood in feces and lesion scores in the chickens. In these trials of challenge with virulent E tenella after inoculation with $1{\times}10^4$ oocysts of the ${\gamma}-irradiated$ E tenella and its progeny, the survival rates of the chickens challenged with the virulent E tenella after immunization with the 1st and the 3rd progeny groups of ${\gamma}-irradiated$ E tenella oocysts were higher(l00%) than that(87.0%) of the challenged control group. The signs of blood in feces and the lesion scores were seen markedly lower with the ourput of the smaller number of oocysts, i.e. OPG 103,900 and 25,800 in the groups of the 1st and the 3rd progeny, respectively, than those(OPG 1,658,900) of the challenged control group. The body weight gains of the 1st and the 3rd progeny groups, the 1st week and the 2nd week after challenge, were higher (2.6g and 155.4g, 11.6g and 168.9g respectively) than those(-85.8g and 63.6g, respectively) of the challenged control group, and the feed conversion ratios(FCR 3.28 and 2.96) of the 1st and the 3rd progeny groups were lower than that(FCR 5.60) of the groups challenged control group. The anticoccidial indices(70.5 and 93.9) of the groups challenged with the virulent oocysts of E tenella after immunization with the 1st and the 3rd progeny of the ${\gamma}-irradiated$ E tenella were significantly higher than that (ACI -81.9) of the challenged control group. It was thought that the immunogenicity of ${\gamma}-irradiated$ E tenella would be increase according to increase the number of generation passaged in chicken. That might be because of increasing the pathogenicity of ${\gamma}-irradiated$ E tenella according to increase the number of generation passaged in chicken.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.16-37
• /
• 2018

In this study, difference in chemical composition of $PM_{2.5}$ observed between the year 2013 and 2015 at six air quality intensive monitoring stations (Bangryenogdo (BR), Seoul (SL), Daejeon (DJ), Gwangju (GJ), Ulsan (US), and Jeju (JJ)) was investigated and the possible factors causing their difference were also discussed. $PM_{2.5}$, organic and elemental carbon (OC and EC), and water-soluble ionic species concentrations were observed on a hourly basis in the six stations. The difference in chemical composition by regions was examined based on emissions of gaseous criteria pollutants (CO, $SO_2$, and $NO_2$), meteorological parameters (wind speed, temperature, and relative humidity), and origins and transport pathways of air masses. For the years 2013 and 2014, annual average $PM_{2.5}$ was in the order of SL ($${\sim_=}DJ$$)>GJ>BR>US>JJ, but the highest concentration in 2015 was found at DJ, following by GJ ($${\sim_=}SJ$$)>BR>US>JJ. Similar patterns were found in $SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$. Lower $PM_{2.5}$ at SL than at DJ and GJ was resulted from low concentrations of secondary ionic species. Annual average concentrations of OC and EC by regions had no big difference among the years, but their patterns were distinct from the $PM_{2.5}$, $SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ concentrations by regions. 4-day air mass backward trajectory calculations indicated that in the event of daily average $PM_{2.5}$ exceeding the monthly average values, >70% of the air masses reaching the all stations were coming from northeastern Chinese polluted regions, indicating the long-range transportation (LTP) was an important contributor to $PM_{2.5}$ and its chemical composition at the stations. Lower concentrations of secondary ionic species and $PM_{2.5}$ at SL in 2015 than those at DJ and GJ sites were due to the decrease in impact by LTP from polluted Chinese regions, rather than the difference in local emissions of criteria gas pollutants ($SO_2$, $NO_2$, and $NH_3$) among the SL, DJ, and GJ sites. The difference in annual average $SO{_4}^{2-}$ by regions was resulted from combination of the difference in local $SO_2$ emissions and chemical conversion of $SO_2$ to $SO{_4}^{2-}$, and LTP from China. However, the $SO{_4}^{2-}$ at the sites were more influenced by LTP than the formation by chemical transformation of locally emitted $SO_2$. The $NO_3{^-}$ increase was closely associated with the increase in local emissions of nitrogen oxides at four urban sites except for the BR and JJ, as well as the LTP with a small contribution. Among the meterological parameters (wind speed, temperature, and relative humidity), the ambient temperature was most important factor to control the variation of $PM_{2.5}$ and its major chemical components concentrations. In other words, as the average temperature increases, the $PM_{2.5}$, OC, EC, and $NO_3{^-}$ concentrations showed a decreasing tendency, especially with a prominent feature in $NO_3{^-}$. Results from a case study that examined the $PM_{2.5}$ and its major chemical data observed between February 19 and March 2, 2014 at the all stations suggest that ambient $SO{_4}^{2-}$ and $NO_3{^-}$ concentrations are not necessarily proportional to the concentrations of their precursor emissions because the rates at which they form and their gas/particle partitioning may be controlled by factors (e.g., long range transportation) other than the concentration of the precursor gases.