• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.313-317
• /
• 2018

Licenses for the storage of spent nuclear fuel (SNF) and vitrified highly active waste in casks under dry conditions are limited to 40 years and have to be renewed for prolonged storage periods. If such a license renewal has to be expected since as in accordance with the new site selection procedure a final repository for spent fuel in Germany will not be available before the year 2050. For transport and possible unloading and loading in new casks for final storage, the integrity and the maintenance of the geometry of the cask's inventory is essential because the SNF rod cladding and the cladding of the vitrified highly active waste are stipulated as a barrier in the storage concept. For SNF, the cladding integrity is ensured currently by limiting the hoop stress and hoop strain as well as the maximum temperature to certain values for a 40-year storage period. For a prolonged storage period, other cladding degradation mechanisms such as inner and outer oxide layer formation, hydrogen pick up, irradiation damages in cladding material crystal structure, helium production from alpha decay, and long-term fission gas release may become leading effects driving degradation mechanisms that have to be discussed.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.202-208
• /
• 2013

This study was conducted to investigate the effect of delayed controlled atmosphere (CA) storage on fruit quality and the incidence of storage disorders during CA storage of 'Fuji' apples (Malus x domestica Borkh.). In the first year of experiment, 'Fuji' apples showed 40% of watercore disorder at the commercial harvest time (Oct. 22). Twenty days delayed CA storage caused to develop the incidence of flesh browning while 30 days delayed CA storage did not. In the second year of experiment, watercore was increased with delaying harvest time. As the estabilishment of delayed CA storage was delayed, the incidence of flesh browning increased at 10 to 30 days delayed CA storage but 40 days delayed CA storage did not have any flesh browning incidence. Respiration rate increased with extending the storage duration. Delayed CA storage reduced respiration rate but was not different compared to the rapid CA. Ethylene production rate was lower in delayed CA storage than in cold storage but higher in delayed CA storage, compared to rapid CA storage. Titratable acidity was lower in delayed CA storage as CA storage progressed. Firmness was not different between rapid CA storage and delayed CA storage after 8 months of CA storage. Therefore, the results indicate that delayed CA storage should be a promising approach to reduce the risk development of flesh browning and watercore during CA storage of 'Fuji' apples.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2010

Although the demand of ready-to-eat (RTE) foods such as Kimbab is growing, large quantities and wide distribution of these foods is difficult due to their short shelf-life, exposed packaging with hygienic risk, and decreased quality at refrigerator temperatures. This study was undertaken to develop preservation and storage methods to extend the shelf-life of RTE rice products using microwave and packaging methods such as vacuum and modified atmosphere packages. RTE rice ball samples inoculated with Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes, Staphylococcus aureus or Bacillus cereus were microwave treated for 0, 30, 60, 90 and 120 seconds. Populations of pathogens on the rice balls were significantly reduced with an increase in treatment time. There were more than 5 log reductions of all pathogens when the samples were microwave treated for 60 seconds. RTE rice balls inoculated with two pathogens (S. aureus and B. cereus) were packaged via air, vacuum, $N_2$ gas, and $CO_2$ gas following microwave treatment for 90 seconds. The initial S. aureus and B. cereus concentration before treatment was 7.60 and 6.59 log CFU/g, and these levels were reduced by 3.37 and 2.18 log CFU/g after microwave treatment. The levels of pathogens were significantly increased during storage time at room temperature. $CO_2$ packaging was the most effective at inhibiting microbial growth among the tested packaging methods. The levels of total mesophilic count, S. aureus and B. cereus after 5 days of storage were 7.7, 8.8 and 9.3 log CFU/g in air packaged samples and 2.4, 3.2 and 8.3 log CFU/g in $CO_2$ gas packaged samples, respectively. However, after 3 days of storage higher levels of B. cereus were observed in all samples, indicating that the samples were not safe to be consumed. Base on these results, microwave treatment and MAP packaging methods using $CO_2$ gas could be used as a potential method for extending the shelf-life of RTE foods.

• Applied Biological Chemistry
• /
• v.35 no.2
• /
• pp.126-131
• /
• 1992

For the development of kiwifruit storage method applicable to farm level, several quality indicator of kiwifruit(Actinidia chinensis Planch.) were measured during storage at modified atmosphere(MA) conditions(0.04, 0.06, 0.08 and 0.10 mm PE Film). The results obtained from the experiment were as follows. The highest firmness was marked by the kiwifruit kept in 0.06 mm thick film bag and the lowest weight loss was shown in 0.10 mm thick film bag. The largest production of respiratory rate was occured after storage for 30 days. The concentration of $O_2\;and\;CO_2$ in 0.06 mm thick film bag was 2.6% and 3.2% after storage for 60 days, respectively. It could be concluded that the optimum PE film thickness for MA storage of kiwifruit was 0.06 mm.

• Food Science of Animal Resources
• /
• v.43 no.6
• /
• pp.1170-1182
• /
• 2023

The aim of this study was to determine the effect of chitosan (CH)-based nanocomposite coating applications [chitosan+TiO₂ (CHT) and chitosan+TiO₂+rosmarinic acid (CHTRA)] on changes in quality attributes of rainbow trout fillets during cold storage (4℃). Fish fillets were randomly divided into four groups and subjected to treatments (CH, CHT, CHTRA, and control). After treatments, the groups were packaged under a modified atmosphere (40% CO₂+30% O₂+30% N₂) and stored at 4℃ for 18 days. During cold storage, the samples were subjected to physico-chemical and microbiological analyses. During storage, CH, CHT, and CHTRA treatments showed lower aerobic mesophilic and psychrotrophic bacteria counts than the control. However, the differences between coating treatments were not significant. The highest mean pH value was determined in the control group. As the storage time increased, the thiobarbituric acid reactive substances value increased. At the end of the storage period, no significant differences were observed between the treatments, including in the control group. The total volatile basic nitrogen (TVB-N) level in the control group was above 25 mg/100 g on day 15 of storage. However, the TVB-N level in the treatment groups was below 20 mg/100 g on day 18. It was also determined that coating application×storage period interaction had a significant effect on all color parameters (p<0.01). At the end of storage, the highest CIE L* was observed in CHTRA treatment. However, the value of this treatment did not differ from that of the CH treatment.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.1
• /
• pp.55-59
• /
• 2007

The oil and concentrated protein powder from squid viscera was extracted and recovered by a semi-batch supercritical carbon dioxide ($SCO_2$) extraction system and the degree of oxidation in the extracted oil was measured in order to compare with extracted oils using organic solvents. The degree of storage in treated squid viscera by $SCO_2$ extraction was measured in order to compare with untreated squid viscera. As results obtained, it was found that the auto-oxidation of the oils using $SCO_2$ extraction occurred very slowly compared to the oils by organic solvent extraction. And the treated squid viscera by $SCO_2$ extraction was reached the point of initial rottenness slowly than untreated squid viscera.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.394-396
• /
• 2008

주요 온실가스인 이산화탄소를 회수 및 저장(Carbon Capture and Storage)하는 기술은 주로 적은 $CO_2$농도를 가지는 연소후 포집공정이 개발 및 적용되었으나, 최근에는 보다 적극적으로 이산화탄소를 분리하기 위하여 연소전 석탄가스화복합발전(IGCC)과 같은 공정에 적용하여 반응공정 중에 생성되는 높은 농도의 $CO_2$를 분리하는 공정이 선진국을 중심으로 활발히 연구가 진행되고 있다. 본 연구에서는 고압의 연소전 조건에서 아민계보다 흡수속도는 느리나 생성가스에 유입되는 $O_2$, SOx, NOx에 의한 부반응 현상, 휘발에 의한 손실, 열적 열화현상이 나타나지 않는 알칼리염계 흡수제의 $CO_2$ 흡수특성에 대하여 연구하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.411-412
• /
• 2023

The purpose of this research and development is to develop a structure module that improves the efficiency and constructability of the layout structure as well as the design development of rainwater permeable storage tank blocks using inorganic binders and aggregates with the aim of reducing greenhouse gas (CO₂) with eco-friendly materials. In addition, for the efficient response to flooding of the developed permeable storage structure, we present a technical solution for combining drone mapping technology and flood monitoring technology that can analyze topographical factors in detail.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.121-127
• /
• 2010

The in-furnace desulfurization technique is applied to the $O_2/CO_2$ combustion system for the carbon capture and storage (CCS) process because this combustion system does not need an additional chamber for the desulfurization. $CaCO_3$ sorbent particles, which have a wide range in size from a few nanometers to several tens of micrometers, are used for this process. In this study, an experimental system which can simulate the $O_2/CO_2$ combustion system was developed. $CaCO_3$ sorbent particles were exposed to the high temperature reactor at $1200^{\circ}C$ with various residence times (0.33-1.46 s) in air and $CO_2$ atmospheric conditions, respectively. The sorbent particles were then sampled at the inlet and outlet of the reactor and analyzed qualitatively/quantitatively using SMPS, XRD, TGA, and SEM. The results showed that the residence time and atmospheric condition in a high temperature reactor can affect the characteristics of the $CaCO_3$ sorbent particles used in the in-furnace desulfurization technique, such as the calcination rate and reaction mechanism.

• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.385-398
• /
• 2018

Although the importance of developing reliable and systematic GHG inventory has increased, the GIS/RS-based national scale LULUCF (Land Use, Land-Use Change and Forestry) sector analysis is insufficient in the context of the Paris Agreement. In this study, the change in $CO_2$ storage of forest land due to land use change is estimated using two GIS/RS methodologies, Sampling and Wall-to-Wall methods, from 2000 to 2010. Particularly, various imagery with sampling data and land cover maps are used for Sampling and Wall-to-Wall methods, respectively. This land use matrix of these methodologies and the national cadastral statistics are classified by six land-use categories (Forest land, Cropland, Grassland, Wetlands, Settlements, and Other land). The difference of area between the result of Sampling methods and the cadastral statistics decreases as the sample plot distance decreases. However, the difference is not significant under a 2 km sample plot. In the 2000s, the Wall-to-Wall method showed similar results to sampling under a 2 km distance except for the Settlement category. With the Wall-to-Wall method, $CO_2$ storage is higher than that of the Sampling method. Accordingly, the Wall-to-Wall method would be more advantageous than the Sampling method in the presence of sufficient spatial data for GHG inventory assessment. These results can contribute to establish an annual report system of national greenhouse gas inventory in the LULUCF sector.