• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.422-428
• /
• 2000

Optimum analytical conditions of the aluminium ion were established by flow injection analysis. Eriochrome Cyanine R(ECR) dye reacts with the aluminium ion at pH 6.0 to form a complex that exhibits maximum absorption at 535 nm. Reaction conditions including the mixing and the reaction coil length, the concentration and the pH of the buffer solutio, temperature, and injection loop volume were optimized to intro-duce this reaction into flow injection analysis. The results were as follows. A mixing coil length of 0.5 m and a reaction coil length of 4.0 m, the pH 6.0 and 1M of acetate buffer solution, the ECR concentration of 0.56 mM, the reaction temperature of 40$^{\circ}C$, the injection loop volume of 300${\mu}L$ were chosen as optimum conditions. Under these conditions the detection limit of the aluminiumion was less than 0.05 mg/L and the repeatability was better than 1%. A sampling frequency of 24 times for an hour was achieved. Interfering ions such as $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$, and other anions were tested, interference did not occur up to 1,000mg/L of ion concentration and up to 2,CO0mg/L of sulfate ion con-centration. This method was applied for the determination of aluminium ion in tap water and ground water of Jeonju and the Gochang area. The results showed that the aluminium residual in tap water of the Jeonju area was at a mean of 0.478mg/L and that in tap water of the Gochang area was at a mean of 0.278mg/L. Aluminium ion residual of the tap waters in the Jeonju area was higher level than that in the Gochang area. Aluminium residual in the ground water of the Jeonju area was 0.386 mg/L and was lower compared to 0.564 mg/L for the Gochang area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.1-9
• /
• 1991

A study was carried out to investigate the composition of rock-forming minerals and mineralogical characteristics of the five major parent rocks in Korea. The identification was done through the analyses of chemical. X-ray diffraction, thermal(DTA, TG), infrared spectroscopic, and microscopic methods. Among these methods, X-ray diffraction was considered to be the most rapid and effective way to identify minerals in the parent rocks. The main rock-forming minerals of the parent rocks were feldspars, quartz, and micas in granite and granite-gneiss, calcite and dolomite in limestone, quartz and calcite in shale, plagioclase and augite in basalt. A small amount of sesquioxides was identified as a accessory mineral by means of DTA from the parent rocks of Weoljeong series(granite) and Cheongsan series(granite-gneiss). The abrasion pH affecting the soil formation ranged from 7.5 to 8.4 in the parent rocks containing ferromagnesian minerals and carbonates. In the granite and granite-gneiss of which the main rock-forming minerals were feldspars and quartz with low content of biotite, the abrasion pH ranged from 6.2 to 6.4. In chemical composition of the parent rocks, Si, AI, and K oxides tented to increase with higher contents of quartz, feldspars, and muscovite, while Fe and Mg oxides with higher content of biotite, chlorite, amphiboles, and augite. Higher ignition loss in limestone and shale resulted in the release of $CO_2$ from calcite and/or dolomite.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.284-288
• /
• 2005

This study was conducted to clarify the effects of supplying methods of selenium on the growth and Se uptake of hydroponically grown tomato plants. Tomato seeds (Lycopersicum esculentum Mill. cv. Momotaro T-93, Daki Seed Co.) were sown in plug tray with fifty holes, and raised for sixty days. Tomato seedlings transplanted to coco fiber slabs were supplied with the nutrient solutions adjusted to EC $2.3dS{\cdot}m^{-1}$ and pH $5.8\~6.2$ recommended by the Japanese Horticultural Experiment Station. Selenium forms used were inorganic $SeO_2$ (here in after referred to Se) and organic selenium chlenium with sugar fatty acid ester (here in after referred to chelated-Se). 10 ppm selenium solutions were treated to tomato plants with foliar applications, drenching, and foliar application plus drenching. Growth characteristics in terms of plant height, number of leaves, leaf area and chlorophyll content were significantly increased in the plot of foliar application ot Se, and in the plot of foliar application plus drenching of chelated-Se than other plots, respectively. Transported contents of selenium into the tomato fruits were highest as 0.302 ppm in the plot of foliar application plus drenching of chelated-Se. Also, it had tended to be higher in the plot of foliar application plus drenching than in the plots of foliar application or drenching in both of Se and chelated-Se. Foliar application and drenching of organic chelated-Se were effective to produce the functional tomato fruits.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.147-155
• /
• 2016

This study presented a measure for turning by-products, released from land farming sites, into resources. The measure involved adding food by-products such as rice bran and nonfat soybean to the sludge, released from the eel farming sites, inoculating the lactic acid bacteria, Aspergillus oryzae, and Bacillus subtilis by step, fermenting them, and measuring the changed ingredients of the fermented fodder. The water content of the fermented fodder by the step of preparation was the first-step fermented product (14.6%) using the lactic acid bacteria, and the second and third-stage fermented product (33.0% and 34.0% respectively) using Aspergillus oryzae and Bacillus subtilis. The pH level was found to be 5.38 in the first-step fermented product due to the secretion of lactic acid caused by the lactic acid bacteria, and the pH level of the second and third-stage fermented products was 5.66 and 7.26, respectively, showing that the pH level increased. The phytic acid content was 0.126g/100g in the first-step fermented product, 0.004g/100g in the second-stage fermented product, and 0.093g/100g in the third-stage fermented product. The measurement of nitrogen content revealed that the amino nitrogen content was high with 1226.37mg% in the second-stage fermented product, and a little lower with 710.18mg% in the third-stage fermented product. The ammonium nitrogen content increased from 0.988mg/kg in the first-stage fermented product to 1.502mg/kg in the third-stage fermented product. Total nitrogen content increased to 2.78% in the first-stage fermented product, 4.08% in the second-stage fermented product, and 4.85% in the third-stage fermented product. As fermentation continued with the three microbes, the phytic acid decreased, and the protein decomposition rate increased. Also, due to the 3 step fermentation, the low-molecule nitrogen ingredient content increased, suggesting that the fodder was developed to offer high digestion and absorption.

• The Korean Journal of Mycology
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2001

To examine the structural properties of the proteoglycan (GMPG, Ganoderma lucidum mycelial proteoglycan) obtained from mycelia in Ganoderma lucidum IY009, we obtained the low and high molecular proteoglycan by ultrafiltration and sepharose CL-4B column chromatography. The physicochemical properties of these fractions were as follows. When the proteoglycan separated by ultrafiltration and sepharose CL-4B column chromatography, its was not fractionated completely. The molecular weight of high molecular proteoglycan by the gel column chromatography (CH) was 250 kD and 2,000 kD, and low molecular proteoglycan was 12kD. The total carbohydrate was consisted of 75.7% (UH) and 96.7% (CH), and the low fraction was 72.7% (UL) and 87.1% (CL), respectively. The sugar of high and low molecular proteoglycan composed of glucose, mannose, fructose, galactose, xylose, ribose and arabinose. Glucose contents of all fraction were ranged from $46.9%{\sim}82.4%$ of the total sugar and the ratio of ${\alpha}$\;and\;{\beta}-glucose$ was $0.84{\sim}1.14$, and its indicated the proteoglycan to be ${\beta}-glucan$. Amino acids pattern showed that the fractions contained a large amount of aspartie acid, glutamic acid, alanine and leucine. These fractions showed the characteristics of IR absorption for ${\beta}-glucan$ at $890\;cm^{-1}\;and\;^{13}C-NMR$ spectroscopy showed the presence of the ${\beta}-1,3-glucan$ and a ${\beta}-1,6-glucan$.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.6-7
• /
• 1972

The air pollutants can be classified into the irritant gas and the asphixation gas, and the irritant gas is closely related to the otorhinolaryngological diseases. The common irritant gases are nitrogen oxides, sulfur oxides, hydrogen carbon compounds, and the potent and irritating PAN (peroxy acyl nitrate) which is secondarily liberated from photosynthesis. Those gases adhers to the mucous membrane to result in ulceration and secondary infection due to their potent oxidizing power. 1. Sulfur dioxide gas Sulfur dioxide gas has the typical characteristics of the air pollutants. Because of its high solubility it gets easily absorbed in the respiratory tract, when the symptoms and signs by irritation become manifested initially and later the resistance in the respiratory tract brings central about pulmonary edema and respiratory paralysis of origin. Chronic exposure to the gas leads to rhinitis, pharyngitis, laryngitis, and olfactory or gustatory disturbances. 2. Carbon monoxide Toxicity of carbon monoxide is due to its deprivation of the oxygen carrying capacity of the hemoglobin. The degree of the carbon monoxide intoxication varies according to its concentration and the duration of inhalation. It starts with headache, vertigo, nausea, vomiting and tinnitus, which can progress to respiratory difficulty, muscular laxity, syncope, and coma leading to death. 3. Nitrogen dioxide Nitrogen dioxide causes respiratory disturbances by formation of methemoglobin. In acute poisoning, it can cause pulmonary congestion, pulmonary edema, bronchitis, and pneumonia due to its strong irritation on the eyes and the nose. In chronic poisoning, it causes chronic pulmonary fibrosis and pulmonary edema. 4. Ozone It has offending irritating odor, and causes dryness of na sopharyngolaryngeal mucosa, headache and depressed pulmonary function which may eventually lead to pulmonary congestion or edema. 5. Smog The most outstanding incident of the smog occurred in London from December 5 through 8, 1952, because of which the mortality of the respiratory diseases increased fourfold. The smog was thought to be due to the smoke produced by incomplete combustion and its byproduct the sulfur oxides, and the dust was thought to play the secondary role. In new sense, hazardous is the photochemical smog which is produced by combination of light energy and the hydrocarbons and oxidant in the air. The Yonsei University Institute for Environmental :pollution Research launched a project to determine the relationship between the pollution and the medical, ophthalmological and rhinopharyngological disorders. The students (469) of the "S" Technical School in the most heavily polluted area in Pusan (Uham Dong district) were compared with those (345) of "K" High School in the less polluted area. The investigated group had those with subjective symptoms twice as much as the control group, 22.6% (106) in investigated group and 11.3% (39) in the control group. Among those symptomatic students of the investigated group. There were 29 with respiratory symptoms (29%), 22 with eye symptoms (21%), 50 with stuffy nose and rhinorrhea (47%), and 5 with sore thorat (5%), which revealed that more than half the students (52%) had subjective symptoms of the rhinopharyngological aspects. Physical examination revealed that the investigated group had more number of students with signs than those of the control group by 10%, 180 (38.4%) versus 99 (28.8%). Among the preceding 180 students of the investigated group, there were 8 with eye diseases (44%), 1 with respiratory disease (0.6%), 97 with rhinitis (54%), and 74 with pharyngotonsillitis (41%) which means that 95% of them had rharygoical diseases. The preceding data revealed that the otolaryngological diseases are conspicuously outnumbered in the heavily polluted area, and that there must be very close relationship between the air pollution and the otolaryngological diseases, and the anti-pollution measure is urgently needed.

• Development and Reproduction
• /
• v.14 no.2
• /
• pp.65-74
• /
• 2010

Placenta has been shown to be a site of expression of several of the monoamine membrane uptake transporters. However, the correlation between the expressions of norepinephrine transporter (NET) and placental development including gynecological diseases is still unknown. To investigate the expression and functions of NET in placenta, we conducted to compare NET expression in normal and preeclamptic placenta and analyzed the function of NET in HTR8-SV/neo trophoblast cells after NET gene transfection. The expression of NET was analyzed in placental tissues from the following groups of patients (none underwent labor): 1) term normal placenta (n=15); 2) term with preeclamptic placeneta (n=15); and 3) pre-term with preeclamptic placenta (n=11) using semi-quantitative RT-PCR, immunohistochemistry, and Western blot. In order to evaluate the function of NET, NET gene plasmid and NET gene-specific siRNA were trnasfected into HTR-8/SVneo trophoblast cells for 24 hours. NET had low expression in the pre-eclamptic placenta compare with normal placenta but no difference in western blot data. NET was expressed in the trophoblasts, and the up-regulation of NET gene stimulated the invasion of HTR-8/SVneo trophoblast cells by 2.5 fold (p<0.05), whereas the NET-siRNA treatment reduced invasion rates. Also, we observed that the expression of NET induces to expression and activity of MMP-9 in HTR-8/SVneo trophoblast cells in zymography. The results suggest that the expression of NET were reduced in pre-eclampsia and should be inhibited invasion activity of trophoblasts. Therefore, these findings provide useful guidelines for the mechanisms of trophoblast invasion as well as for the basic understanding of gynecological diseases including pre-eclampsia.

• Progress in Medical Physics
• /
• v.9 no.1
• /
• pp.11-21
• /
• 1998

Circular metal electrodes were vacuum-deposited with chromium on the both sides of Teflon-FEP and PET film characteristic of electret and the physical properties of the two polymers were observed during an irradiation by gamma-ray from $\^$60/Co. With the onset of irradiation of output 25.0 cGy/min the induced current increased rapidly for 2 sec, reached a maximum, and subsequently decreased. A steady-state induced current was reached about in 60 second. The dielectric constant and conductivity of Teflon-FEP were changed from 2.15 to 18.0 and from l${\times}$l0$\^$-17/ to 1.57${\times}$10$\^$-13/ $\Omega$-$\^$-1/cm$\^$-1/, respectively. For PET the dielectric constant was changed from 3 to 18.3 and the conductivity from 10$\^$-17/ to 1.65${\times}$10$\^$-13/ $\Omega$-$\^$-1/cm$\^$-1/. The increase of the radiation-induced steady state current I$\^$c/, permittivity $\varepsilon$ and conductivity $\sigma$ with output(4.0 cGy/min, 8.5 cGy/min, 15.6 cGy/min, 19.3 cGy/min) was observed. A series of independent measurements were also performed to evaluate reproducibility and revealed less than 1% deviation in a day and 3% deviation in a long term. Charge and current showed the dependence on the interval between measurements, the smaller the interval was, the bigger the difference between initial reading and next reading was. At least in 20 minutes of next reading reached an initial value. It may indicate that the polymers were exhibiting an electret state for a while. These results can be explained by the internal polarization associated with the production of electron-hole pairs by secondary electrons, the change of conductivity and the equilibrium due to recombination etc. Heating to the sample made the reading value increase in a short time, it may be interpreted that the internal polarization was released due to heating and it contributed the number of charge carriers to increase when the samples was again irradiated. The linearity and reproducibility of the samples with the applied voltage and absorbed dose and a large amount of charge measured per unit volume compared with the other chambers give the feasibility of a radiation detector and make it possible to reduce the volume of a detector.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.43-50
• /
• 1978

In order to compare the effectiveness of different phosphorus forms (pulverized as regranulized) and formulars (compound fertilizers) of fused phosphate and to compare the effectiveness of boron from different forms (straight borax, granulized with fused phosphate and included in compound fertilizer), a field experiment was conducted on a relatively fertile upland soil using soybean as a test crop. Results are summarized as following. 1. Yield of soybean was significantly higher in the plots fertilized with P when compared to check plot (no p). However, no significant differences were observed among the different forms or formulars of fused phosphate, indicating that the regranulization or formulation of compound fertilizer did not influence the effectiveness of phosphorus. 2. The application of boron, regardless of its formular, brought about higher B content in plant tissue and higher grain yield. There was a tendency that boron contained in ragranulized fused phosphate was more effective than straight borax. The results also indicated that when boron is to be included in NPK compound fertilizer, its content should be at the least 1.5% as $B_2O_3$. 3. The effectiveness of boron appeared as increased number of pod, higher B, and Ca contents in plant and the amounts of uptake of these elements by soybean. 4. The analysis of soil after the experiment indicated that different forms or formulars of fused phosphate were similarly effective in increasing the available P, Ca, and Mg contents in the soil. 5. Slight increase in available B contents in the experimental plot soils applied with boron fertilizer was observed after the trial.