• Title/Summary/Keyword: $CO_2$ 주입

Search Result 606, Processing Time 0.041 seconds

Effect of surgical site instillation after laparoscopic urologic surgery (비뇨기과 복강경 수술 후 국소마취제 점적의 효과)

  • Hwang, Yong;Shin, Sangyol;Oh, Tae Hoon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.7
    • /
    • pp.200-206
    • /
    • 2018
  • The aim of this study was to evaluate the effect of Ropivacaine on pain following laparoscopic surgery. Between March 2015 and June 2017, all 97 patients with renal mass who elected to receive laparoscopic nephrectomy were reviewed, retrospectively. Normal saline (0.9%) was used as a control in 45 patients while Ropivacaine was used for local anesthesia in the instillation group (n=52). Pain score (visual analog scale) of the shoulder and upper abdominal area between the two groups was significantly different between recovery time and 24 h (p<0.05), with no significant differences between 48 and 72 h (both p>0.05). In the instillation group, pain score of shoulder and abdominal pain in the two groups according to the amount of CO2 used was not significantly different between recovery time and 24, 48, and 72 h (all p>0.05). Ropivacaine reduced shoulder and upper abdominal pain that occurred within 24 h after surgery. Effective pain control with Ropivacaine is needed in the early postoperative period when a large amount of CO2 is used in laparoscopic surgery.

COMPARISON OF BOND STRENGTH OF A FIBER POST CEMENTED WITH VARIOUS RESIN CEMENTS (다양한 레진시멘트로 합착한 섬유포스트의 결합강도 비교)

  • Lee, Hyun-A;Cho, Young-Gon
    • Restorative Dentistry and Endodontics
    • /
    • v.33 no.6
    • /
    • pp.499-506
    • /
    • 2008
  • The purpose of this study was to compare the push-out strength of a fiber post cemented with various resin cements. Newly extracted 36 human mandibular premolars which had single root canal were selected and their crown portions were removed. The root canal was instrumented using $PROTAPER^{TM}$ system and obturated using continuous wave technique. In each root, a 9-mm deep post space was prepared. #2 translucent fiber post (DT Light post, Bisco Inc., Schaumburg, IL, U.S.A.) was cemented using injection technique with Uni-dose needle tip (Bisco) and six different resin cements. The tested resin cements were Duo-Link (Bisco Inc., Schaumburg, IL, U.S.A.), Variolink II (Ivoclar-Vivadent AG, Schann, Liechtenstein), Panavia F (Kuraray Medical Inc., Okayama, Japan), Multilink Automix (Ivoclar-Vivadent AG, Schann, Liechtenstein), RelyX Unicem (3M ESPE Dental Products, St. Paul, MN, U.S.A.), and Maxcem (Kerr Co., CA, U.S.A.). After storage in distilled water for 24 hours, each root was transversally sectioned into approximately 1-mm thick sections. This procedure resulted in 6 serial sections per root. Push-out test wasperformed using a universal testing machine (EZ Test, Shimadzu Co.) with a crosshead speed of 1 mm/min. The data were analyzed with one-way ANOVA and Tukey HSD (p=0.05). The push-out strength of the groups which cemented fiber post with Panavia F and Multilink Automix were lower than those of the other groups. But, there were no statistically significant difference among groups at a probability level of 0.05.

Regional Citrate Anticoagulatinln for Continuous Renal Replacement Therapy in Children (소아의 지속적 신대체요법에서 Citrate 항응고요법의 경험)

  • Hahn Hye-Won;Park Young-Seo
    • Childhood Kidney Diseases
    • /
    • v.9 no.1
    • /
    • pp.76-82
    • /
    • 2005
  • Purpose : Regional anticoagulation with trisodium citrate for continuous renal replacement therapy(CRRT) is an effective and safe method, with lower bleeding risk. However it is not widely used because of complex current protocols used to prevent anticipated metabolic derangements. We evaluated simplified regional anticoagulation protocols with ACD-A(R) solution and commercially available calcium-containing dialysis solution. Methods : The medical records of twenty-eight patients who underwent CRRT were reviewed. Hemofilter life span according to the anticoagulation method used was compared, and laboratory findings at Pre- and 48 hours post-CRRT initiation were compared in the citrate-based CRRT group. Results : Of the twenty-eight Patients, five patients underwent citrate-based CRRT Hemofilter life span was 1.60 $\pm$ 0.72 days, showing no significant differences with the hemofilter life span in the heparin based and LMWH based CRRT group. No patients experienced hemorrhagic complications. PT, aPTT, sodium, t$CO_{2}$, iCa levels showed no difference in pre- and post-CRRT. Total calcium levels were increased. At the recommended postfilter iCa level, j.e., 0.25-0.39 mmol/L, all five patients needed increased amount of citrate infusion, and Ca infusion requirement was decreased. Conclusion : Simplified regional citrate anticoagulation with calcium-containing dialysate is an effective and safe method, and is not associated with increased hemofilter clotting. However, increased postfilter iCa level is recommended.

  • PDF

A Study on the Atmospheric Pressure Control of the VARTM Process for Increasing the Fiber Volume Fraction and Reducing Void (섬유부피분율 증가와 공극 감소를 위한 VARTM 공정의 대기압 제어에 관한 연구)

  • Kwak, Seong-Hun;Kim, Tae-Jun;Tak, Yun-Hak;Kwon, Sung-Il;Lee, Jea-Hyun;Kim, Sang-Yong;Lee, Jong-Cheon
    • Composites Research
    • /
    • v.34 no.2
    • /
    • pp.88-95
    • /
    • 2021
  • VARTM (Vacuum-assisted resin transfer molding) process is a low-cost process technology and affiliated with OoA (Out of Autoclave). Besides, it has been widely used in various fields. However, because of its lower quality than the autoclave process, it isn't easy to apply the VARTM process to the aerospace industry, which requires high reliability. The main problem of the VARTM process is the loss of mechanical properties due to the low fiber volume fraction and high void content in comparison to the autoclave. Therefore, many researchers have studied to reduce void and increase fiber volume fraction. This study examines whether the method of controlling atmospheric pressure could increase the fiber volume fraction and reduce void during the resin impregnation process. Reliability evaluation was confirmed by compressive strength test, fiber volume fraction analysis, and optical microscopy. As a result, it was confirmed that increasing the atmospheric pressure step by step in the VARTM process of impregnating the preform with resin effectively increases the fiber volume fraction and reduces void.

Possibility of aerobic stabilization technology for reducing greenhouse gas emissions from landfills in Korea (국내 폐기물매립지 온실가스 감축을 위한 호기성 안정화 공법의 적용 가능성)

  • Ban, Jong-Ki;Park, Jin-Kyu;Kim, Kyung;Yoon, Seok-Pyo;Lee, Nam-Hoon
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.23 no.4
    • /
    • pp.40-51
    • /
    • 2015
  • This study is to estimate the viability of aerobic stabilization technology for reducing greenhouse gas (GHG) emissions from landfills in Korea. In this study, methane emissions were estimated by applying Landfill gas estimation model (LandGEM) to Y landfill in Korea. By comparison of an anaerobic condition (baseline) and an aerobic condition, the amount of $CO_2eq$ savings was calculated. The $CO_2eq$ savings take place inside the landfilled waste during aeration due to the conversion of previously anaerobic biodegradation to aerobic processes, releasing mainly $CO_2$. It was demonstrated that 86.6% of the total GHG emissions occurring under anaerobic conditions could be reduced by aerobic stabilization technology. This means the aerobic stabilization technology could reduce environmental contamination through early stabilization and GHG emissions considerably at the same time. Therefore, the aerobic stabilization technology is one of the optimal technologies that could be employed to domestic landfill sites to achieve sustainable landfill.

Effect of Plasma Treatment on Permeability and Selectivity Characteristics of Mixture Gas through Polyimide Membrane (플라즈마 처리된 폴리이미드 막의 기체투과특성)

  • 배성렬;노상호;류대선;박희진
    • Membrane Journal
    • /
    • v.11 no.1
    • /
    • pp.38-49
    • /
    • 2001
  • The surface of polyimide membrane was modified by plasma treatment using Ar and NH~. and the permeability and selectivity for the mixture gas $(CO_2/N_2=20/80 vol%)$ were measured. The per¬meation experiments were performed by a variable volume method at $30^{\circ}$C and total pressure of 5 atm, The effect of the plasma conditions such as treatment time, power input, gas flow rate and pressure in the reactor on the transport Dwperties of modified membranes was investigated. The surface of the plasma treated membrane was analyzed by means of FTlR - ATH, ESCA and AFM. The dependences of the wettability and the etching on plasma treatment time were investigated by use of the contact angle and the weight loss measurement. Measurements of gas pcnneability characteristic were performed using both dry and wet membranes. The effects of experimental conditions such as temperature on the membrane performance were studied.

  • PDF

Microfabrication of Thin Film Sensor with Metal Oxide Nanostructure and Their Gas Sensing Properties (금속 산화물 나노구조형 마이크로 박막 센서의 제작 및 가스 응답 특성)

  • Kang Bong-Hwi;Lee Sang-Rok;Song Kap-Duk;Joo Byung-Su;Lee Duk-Dong
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.8 s.350
    • /
    • pp.13-18
    • /
    • 2006
  • [ $SnO_2$ ] and ZnO nanostructures were grown on the surface of thin film by heat treatment of metal Sn, Zn under Ar gas flow and $O_2$ at atmospheric pressure, respectively. The sensitivity of the $SnO_2$ thin film device on which grown nanowires to CO gas(5,000 ppm) was 50 % at the operating temperature of $200^{\circ}C$. In case of using Pt as catalysts, the sensitivity was enhanced and operating temperature was reduced(73 % at $150^{\circ}C$ ). The sensitivity of the ZnO nanorods device using Cu as catalysts to NOx gas was 90 % at the operating temperature of $200^{\circ}C$. It was found that the sensitivity to CO and NOx gases for the device on which grown nanostructures was much higher than those for general thin film device.

Combination Effect of Modified Atmosphere Packaging and Electron Beam Irradiation on the Oxidative and Microbiological Stability of Ground Pork during Storage (공기 조절 포장과 전자선 조사의 병용이 분쇄돈육의 저장 중 산화와 미생물적 안정성에 미치는 영향)

  • Whang, Key
    • Food Science of Animal Resources
    • /
    • v.22 no.4
    • /
    • pp.322-329
    • /
    • 2002
  • Ground pork was packaged(purged) with modified atmosphere (n$_2$ and CO$_2$) and irradiated with the electron beam in order to find out whether modified atmosphere packaging (MAP) inhibit the microbial growth and lipid oxidation development caused by electron beam irradiation. After packaging and irradiation, ground pork was stored at 4$^{\circ}C$ for 6 days and -15$^{\circ}C$ for 3 months, and periodically the microbial counts and the thiobarbituric acid reactive substances (TBARS) for the determination of lipid oxidation were measured. The inhibition of growth of total aerobic bacteria and mesophiles was confirmed when the ground pork was irradiated with the electron beam dose of 1.5 and 3.0 kGy. The N$_2$ or CO$_2$ purging alone was also effective in reducing the development of lipid oxidation of ground pork during storage at 4 and -15$^{\circ}C$. The combination of electron beam irradiation(1.5 and 3.0 kGy) with MAP (N$_2$ or CO$_2$) was effective to inhibit the growth of total aerobic bacteria and mesophiles, and retard the lipid oxidation of ground pork during storage at 4$^{\circ}C$ for 6 days and -15$^{\circ}C$ for 3 months.

가스치환포장 및 감마선을 병용처리한 최소가공 절임배추의 품질특성

  • 안현주;김재현;김재경;조철훈;김장호;육홍선;변명우
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.185.2-186
    • /
    • 2003
  • 세계적으로 최소가공식품(minimally processed foods)의 시장이 확대되면서, 최소가공된 과채류의 미생물학적 안전성 확보가 중요한 사안으로 대두되고 있다. 이에 본 연구는 김치제조용 원료배추를 모델로 하여 감마선 및 가스치환 포장법을 병용한 절임배추의 미생물학적, 이화학적 특성을 평가하였다. Fresh-cut상태의 절임배추(염농도 3%)를 각각 air, 100% $CO_2$, 25% $CO_2$/75% $N_2$가스를 주입하여 포장한 후 0, 0.5, 1, 2 kGy의 선량으로 감마선 조사하여 3주 동안 저장하면서 분석에 사용하였다. Total aerobic bacteria, coliforms, Salmonella, lactic acid bacteria의 분포를 살펴본 결과, $CO_2$혹은 $CO_2$/$N_2$포장과 감마선을 병용처리한 경우 저장기간 동안 total aerobic bacteria, coliforms 및 Salmonella 모두 1kGy의 선량에서 90% 이상 감소시킬 수 있는 것으로 나타나, 일반 함기포장보다 효과적인 것으로 나타났다. 색도 및 물성은 포장방법에 따른 차이를 보이지 않았으며, pH의 경우도 감마선 조사 및 가스치환 포장시 더욱 효과적으로 유지할 수 있었다. FRAP(ferric reducing antioxidant power) value 및 DPPH radical 소거능과 같은 생리활성 능력을 측정한 결과 포장방법 및 감마선 조사에 의한 차이를 보이지 않았다. 따라서 가스치환 포장 및 감마선 조사를 병용시 함기포장구 보다 낮은 감마선 조사선 량에서 병원성 미생물을 제어할 수 있었으며, 이화학적 품질이 우수하고 저장성이 향상된 절임배추를 제조할 수 있었다.7로 4$0^{\circ}C$ 진공건조와 -7$0^{\circ}C$ 동결건조의 L값 변화보다 큰 변화를 보였고, 또한‘a’값과 ‘b’값의 경우도 마찬가지로 5$0^{\circ}C$ 열풍건조의 경우가 양파의 내부와 외부면의 적색도 및 황색도 변화가 크게 일어나는 경향을 나타내었다. 건조과정 중 vitamin C의 함량변화는 건조에 의한 수분함량의 감소로 vitamin C의 함량은 상대적으로 증가하였고, -7$0^{\circ}C$ 동결건조의 경우가 가장 높은 vitamin C의 증가량을 나타내었고, 그와 반대로 5$0^{\circ}C$ 열풍건조의 경우는 열에 의한 vitamin C의 변화로 인한 상대적 증가량은 감소하는 경향을 나타내었다.아현미가 더욱 조밀하였다. 10시간 탈삽처리에서 상품성이 우수하였다. 그러나 25'E 28시간 탈삽처리는 탈삽의 균일도가 다른 처리에 비해 떨어지는 경향이었다. 경우, 사과표피의 색도 변화를 현저히 지연시킴을 확인하였다. 또한 control과 비교하여 성공적으로 사과에 코팅하였으며, 상온에서 보관하여을 때 사과의 품질을 30일 이상 연장하는 효과를 관찰하였다. 이들 결과로부터 대두단백질 필름이 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W

  • PDF

Simultaneous Separation and Determination of $^{l4}C\;and\;^3H$ in Spent Resins from PWR Nuclear Power Plants (가압경수로형 원전에서 발생된 폐수지의 $^{14}C$$^3H$ 동시 분리 및 측정)

  • Park, Soon-Dal;Kim, Jung-Suck;Kim, Jong-Goo;Han, Sun-Ho;Jee, Kwang-Yong
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.5 no.3
    • /
    • pp.179-188
    • /
    • 2007
  • In this work $^{14}C\;and\;^3H$ distribution characteristics of spent resins from nuclear power plants(NPPs), pressurized water reactors(PWRs), was investigated. It was found that the recovery percent of $^{14}C$ by the wet oxidation-acid stripping was $81%{\sim}100%$ for the added activity range of $^{14}C,\;0.72\;Bq{\sim}460\;Bq$, and it was not affected by the kinds of stripping acids, 3N-HCl, $3\;N-HNO_3\;and\;3\;N-H_2SO_4$. And the recovery percent of $^3H$ by distillation using the same apparatus was $81%{\sim}101%$ for the added activity range of $^3H,\;0.60\;Bq{\sim}435\;Bq$. Among the tested stripping acids, 3\;N-HCl, $3\;N-HNO_3\;and\;3\;N-H_2SO_4$, only the trapped $^3H$ solution by distillation in $3\;N-H_2SO_4$ was compatible with the 3H scintillator, Ultimagold XR. Neither of the $^{14}C\;and\;^3H$ trapping solutions from the spent ion exchange resin samples by the wet oxidation-3 $N-H_2SO_4$ stripping contained gamma nuclides. However, some gamma nuclides, $^{60}Co,\;^{134}Cs,\;^{137}Cs\;and\;^{54}Mn$, were found in the trapped $^3H$ solutions of the spent resins by the wet oxidation-3 N-HCl stripping. It was the same for the $^3H$ trapping solutions of the spent resins by Sample Oxidizer(PACKARD MODEL 307). Meanwhile only two nuclides, $^{134}Cs,\;and\;^{134}Cs$, were found in the $^{14}C$ trapping solutions of the spent resins by Sample Oxidizer(PACKARD MODEL 307). It was found that most of the $^{14}C$ in the spent resins existed as inorganic carbon form, more than about 70% of the total $^{14}C$ content. Among the analyzed 30 spent ion exchange resin samples, the average concentration of $^{14}C$ and $^3C$ for the high radioactive samples, 8 samples, was $19000\;Bq/g{\pm}41000\;Bq/g,\;670\;Bq/g{\pm}460\;Bq/g$ and that for the low radioactive samples, 22 samples, was $4.2\;Bq/g{\pm}4.3\;Bq/g,\;6.0\;Bq/g{\pm}5.3\;Bq/g$, respectively. And the average $^{14}C/^3H$ ratio for the high radioactive samples, was higher, 28, than that of low radioactive samples, 0.70. Some linear relationship trend was found between the activity concentrations of $^{14}C\;and\;^3H$.

  • PDF