• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1581-1584
• /
• 2008

In dual-polycide-gate structure with butting contact, net doping concentration of polysilicon was decreased due to overlap between $n^+$ and $p^+$ and lateral dopant diffusion in silicide/polysilicon layers. The generation of parasitic Schottky diode in butting contact region is attributed both to the $CoSi_2$-loss due to $CoSi_2$ agglomeration and to the decrease in net doping concentration of polysilicon layer. Parasitic Schottky diode reduces noise margin of sense amplifier in DDI DRAM, which causes column fail. The column fail could be reduced by physical isolation of $n^+/p^+$ polysilicon junction or suppressing $CoSi_2$ agglomeration by using nitrogen implantation into $p^+$ polysilicon before $CoSi_2$ formation.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.56-64
• /
• 1996

The objective of this investigation is to establish the rejection characteristics of caesium and cobalt from radioactive liquid waste by chemical/ultrafiltration process. An extensive experimental investigation was conducted with inactive caesium and cobalt ions, utilizing ultrafiltration stirred cell. Caesium and cobalt could be effectively removed from waste solution using copper ferrocyanide and polyarcylic acid(PAA). The rejection dependence of the caesium was found to be a function of caesiun to potassium copper ferrocyanide feed molar ratio. The binding behavior of caesium on K$_2$Cu$_3$(Fe(CN)$\sub$6/)$_2$, particles was explained in terms of a Langmuir adsorption isotherm. When Cs/K$_2$Cu$_3$(Fe(CN)$\sub$6/)$_2$molar ratio was 1.5, the removal of caesium was the most efficient. The rejection efficiency of cobalt is dependent upon various parameters such as pH, cobalt concentration and PAA concentration. The rejection behavior of cobalt was explained in term of a equilibrium model taking into account the reaction between the ligand group, the proton and the cobalt ion. At the conditions of PAA/Co ratio of 2 and pH of 5.6, the removal of cobalt was over 90%. Also, the effect of chemical addition sequence for the simultaneously removal of caesiun and cobalt was discussed.

• Korean Journal of Animal Reproduction
• /
• v.26 no.3
• /
• pp.205-214
• /
• 2002

There are many methods to introduce exogenous DNA into embryo to produce transgenic animals. Exogenous gene can be integrated into oocyte by sperm vector. In this study, sperm was used as a vector for a transgene, which is encoding enhanced green fluorescent protein (EGFP). The objective of this study was to investigate the expression of exogenous gene in bovine embryos after injection of spermatozoa cocultured with EGFP DNA fragment. Spermatozoa were plunged into liquid nitrogen and thawed several times or shook in 0.2% Triton X-100 to remove sperm membrane followed by DTT treatment. The injected oocytes were co-cultured with vero cells in CR1aa, and expression of EGFP gene was observed under fluorescent microscope. Blastocyst formation rates of oocytes injected with sperm treated with DTT, DTT-freezing or DTT-Triton X-100 were 34.7, 39.4 and 31.9%, respectively. The rates of EGFP expression in oocytes injected with 54 ng DNA after DTT-treated, DTT-freezing and DTT-Triton X-100-treated sperm were 0, 19.1 and 13.9%. On the other hands, expression rate of oocytes injected with sperm cocultured with 13.5, 27 and 63.5 ng of EFGP DNA were 6.7, 9.0 and 5.1%, respectively. When intact sperm was mixed with 63.5 ng/${mu}ell$ EGFP DNA fragment, and then electroporated before injection, the expression rate of injected oocyte was 2%. Unexpectedly, electro-poration could not increase the expression rate. These results suggest that sperm can be used as a transgene vector, even if the efficiency was low (19.1%).

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.157-160
• /
• 2008

The generation of high-purity hydrogen from hydrocarbon fuels is essential for efficient operation of fuel cell. In general, most feasible strategies to generate hydrogen from hydrocarbon fuels consist of a reforming step to generate a mixture of $H_2$, CO, $CO_2$ and $H_2O$ (steam) followed by water gas shift (WGS) and CO clean-up steps. The WGS reaction that shifts CO to $CO_2$ and simultaneously produces another mole of $H_2$ was carried out in a two-stage catalytic conversion process involving a high temperature shift (HTS) and a low temperature shift (LTS). In a typical operation, gas emerges from the reformer is taken through a high temperature shift catalyst to reduce the CO concentration to about 3~5%. The HTS reactor was designed and tested in this study to produce hydrogen-rich gas with CO to a range of 2~4%. The iron based catalysts (G-3C) was used for the HTS to convert the most of CO in the effluent from the partial oxidation (POX) to $H_2$ and $CO_2$ at a relatively high rate. Parametric screening studies were carried out for variations of the following variables: reaction temperature, steam flow rate, components ratio ($H_2/CO$), and reforming gas flow rate.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.50-57
• /
• 1989

Tapered etching of polysilicon films has been achieved by implanting phosphorus ions into the polysilicon film and using plasma etch in either $CF_4-O_2\;or\;SF_6$. A two-step plasma etching method is also proposed to control the taper angle of the etched edge without changing the implantion conditions. The taper angle is determined by the ratio of the etch rate of the undamaged region to that of the damaged top region of the polysilicon layer. The ratio is found to be dependent on the implantion dose, the implantion energy and the anisotropy of etching. The minimum angle in our experiments is about $10^{\circ}$. When the two-step etching method is employed, the taper angles can be controlled from the minimum angle up to about $55^{\circ}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.50-55
• /
• 2014

It was firstly found in 1st group element. Recently, it has been reported on the improvement of efficiency of the OLEDs by introducing thin layer of some carbonate materials of alkali metal. In order to improve the efficiency of OLEDs which is one of the next generation displays, we have studied the electrical characteristics of the device depending on the thickness ratio of the hole-injection layer to the electron-injection layer. Teflon-AF was used as the hole-injection material, and alkali-metal carbonates of $Li_2CO_3$ were used as the electron-injection materials. To obtain a proper thickness ratio, we manufactured. Four types of devices with the thickness ratio of HIL to EIL were made to be 1 : 4, 2 : 3, 3 : 2, and 4 : 1. The results of electrical and optical properties showed that the device with the thickness ratio of 4 : 1 is the most excellent result. In addition, to prepare a four-layer device by inserting the ${\alpha}$-NPD is a hole transporting material was compared with three-layer element. As a result, the maximum luminance, the maximum luminous efficiency, maximum external quantum efficiency of about 124 [%], 164 [%], 106 [%] improve was confirmed.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.933-938
• /
• 2008

In the present study, carbon dioxide was converted to methane, using bio-hydrogen. Here, the bio-hydrogen was produced from organic waste. The anaerobic microorganism was cultured using only carbon dioxide and hydrogen for duration of 3 months. Therefore methane was not produced with acetogenotrophs. During methane production, carbon dioxide and hydrogen are taken in different ratios; among which 1 : 5 ratio has shown the highest methane yield. Carbon dioxide and hydrogen were introduced into the reactor at the rate of 8 mL/min and 40 mL/min, respectively. In this case, 92% of carbon dioxide was reduced and 2.2 m$^3$/m$^3$ day amount of methane was produced. Thus, the process has been successful in conversion of carbon dioxide into methane by purging it into methane fermentation reactor with bio-hydrogen using batch process.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.25-39
• /
• 2015

$CO_2$ geological storage plays an important role in reduction of greenhouse gas emissions, but there is a lack of research for CCS demonstration. To achieve the goal of CCS, storing $CO_2$ safely and permanently in underground geological formations, it is essential to understand the characteristics of them, such as total storage capacity, stability, etc. and establish an injection strategy. We perform the impedance inversion for the seismic data acquired from the Ulleung Basin in 2012. To review the possibility of $CO_2$ storage, we also construct porosity models and extract attributes of the prospects from the seismic data. To improve the quality of seismic data, amplitude preserved processing methods, SWD(Shallow Water Demultiple), SRME(Surface Related Multiple Elimination) and Radon Demultiple, are applied. Three well log data are also analysed, and the log correlations of each well are 0.648, 0.574 and 0.342, respectively. All wells are used in building the low-frequency model to generate more robust initial model. Simultaneous pre-stack inversion is performed on all of the 2D profiles and inverted P-impedance, S-impedance and Vp/Vs ratio are generated from the inversion process. With the porosity profiles generated from the seismic inversion process, the porous and non-porous zones can be identified for the purpose of the $CO_2$ sequestration initiative. More detailed characterization of the geological storage and the simulation of $CO_2$ migration might be an essential for the CCS demonstration.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.171-176
• /
• 2000

This purpose of this study is to investigate the combustion emission characteristics on the effect of secondary air injection in combustion field of model gas turbine combustor changing excess air ratio. For this purpose, meantemperature, CO, CO2, O2 and HC concentration were measured by changing excess air ratio and secondary air injection. As a result of this study, meantemperature, CO2 emission was decreased and CO emission increased by increasing the excess air ratio of secondary air. therefore, This paper showed the effect of Secondary air injection on flame structure, combustion emission characteristics.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.423-429
• /
• 2009

The purpose of this study is to investigate the optimal condition for the hydrogen-rich gas production and the CO removal by reforming of gliding arc plasma reforming system using biogas. The parametric screening studies were carried out according to changes of steam feed amount, catalyst bed temperature in water gas reactor and catalyst bed temperature, input air flow rate in preferential oxidation reactor. The standard condition is as follows. The steam/carbon ratio, catalyst bed temperature, total gas flow rate, input electric power and biogas composition rate ($CH_4$ : $CO_2$) were fixed 3, $700^{\circ}C$, 16 L/min, 2.4 kW and 6 : 4, respectively. The results are as follow, HTS optimum operating conditions were S/C ratio of 3 and reactor temperature of $500^{\circ}C$. LTS were S/C ratio of 2.9 and temperature of $300^{\circ}C$. Also, PROX I optimum conditions were input air flow rate of 300 mL/min and reactor temperature of $190^{\circ}C$. PROX II were 200 mL/min and $190^{\circ}C$ respectively. After having passed through each reactor, the results were as follows: 55% of $H_{2}$ yield, 0% of CO selectivity, 99% of $CH_4$ conversion rate, 27% of $CO_2$ conversion rate, respectively.